Batch management number ranges

Hi guru's
My client is using internal number ranges for my raw material
but now they want to enter external number at the time of Goods reciept
and also I want to make it mandatory for external number ranges.
that mean system is proposing me internal number ranges now
and user is updating external number ranges.
My issue is system should not propose me any internal number ranges
I want to update my external number ranges only
could any body help me to solve this issue?
which user exit i have to try or is there any other option?
Nilesh

Dear,
Set Up Customer Exits for External Batch Number AssignmentAs part of the external batch number assignment, the following two function module exits are available in the SAP enhancement SAPLV1ZE for checking a new batch number that has been entered.
EXIT_SAPLV01Z_003. Using this exit, you can replace the proposed number range object BATCH_CLT and/or external interval 02 with a number range object and/or external interval you have defined yourself.
You also have the option of suppressing the batch number check, for example, based on the material or plant.
EXIT_SAPLV01Z_004. Using this exit, you can define your own checking rule.
In this you write a code, if the plnat is so and so , then take this external number range, if youn want internal number range then use the following
You can use SAP enhancement SAPLV01Z for internal batch number assignment. This enhancement contains two function module exits that you can use to define number ranges or templates for batch numbers:
Goto OMCZ, Inactive internal no assignment for the batches.
Now in OMAD- Maintain no ranges for object- BATCH_CLT
Maintain external no range for that.
Please rfer this also,
http://help.sap.com/saphelp_40b/helpdata/ru/dc/1d4b6e5733d1118b3f0060b03ca329/content.htm
Regards,
R.Brahmankar

Similar Messages

Batch management number range issue

Hello Experts,
We have one requirement like this we are following Batch unique at material level. Client requirement is like this; they require separate number range for plant and order type combination. Is it possible?
If it is possible please specify the steps.
Thanks and regards,
Ganesh

HI,
In our case we had to differentiate the batches for different plants and we have used the first digit as alphabetic character with reference to the plant. Here we had a single number range for batch creation but the first digit of the generated batch number will be an alphabet representing the plant. This was done with the help of the enhancement SAPLV01Z and EXIT_SAPLV01Z_001.
Hope this helps you to satisfy your requirement.
Regards,
Ravi Kumar C.

Re: batch managment no range

hai experts ,
i accedentaley deleted no ranges for batch managment which are taking automaticalley , now the same no range created but whille iam doing migo its asking enter batch no manually even after i set 101 as automatic in create batch.
regards
gvrk

Hi ,
Number range deletion and recreation doent effect any thing so it should work .
Check again number range ticked for internal or not for batch management then it comes automatically.

Batch management no ranges

HI all
I want to create new no range for internal batch no assignment, there is one default range maintain and system picking that no range only. i wann use auto batch generation during 101 all settings are done
and batch no is creating automatically but that old defined not mine.
plz tell me how to define
somebody told to me to create object for this, i also create but how to assign or use this object in order to define new no range, which i can use during auto batch no creation pl guide me.
thank useful answer will be rewarded
amit

HI
You define this in Customizing for Batch Management in the step Set Up Customer Exits for Internal Batch Number Assignment.
You can find further information under Configure Customer Exits for Intern. Batch Number Assignment in the Implementation Guide (IMG) for Batch Management.
For more details check the following link:
http://help.sap.com/saphelp_47x200/helpdata/en/25/2838bf4f7811d18a150000e816ae6e/frameset.htm
Thanks

Org. Management Number Ranges

Hi Experts,
When I creating new position number by using FM RH_OBJECT_CREATE in the program , I am getting the number range error.
We have define a new plan version for creating this new postions.
Is number range linked to plan version.
Regards,
IFF

Hi,
Whether number range is linked to plan version can be configured:
Chenk switch Number assignment for all plan versions: T77S0 ->Group:NUMRG Sem. abbr:COMP
If you set the switch 'NUMGR COMP' to 'X', you can assign numbers across different plan versions.
If you decide not to work with number assignment valid for all plan versions, you must create individual number intervals per plan version (and possibly also per object type). If you decide to use plan version- independent number assignment, you create number intervals that are valid for all plan versions. In this case, there is no danger of parallel number intervals occurring i.e. the same number interval for one object in one plan version and for a different object in another plan version.
In the standard SAP R/3 system, number assignment is not valid for all plan versions.
You can define number range in view T77IV.
Hope helps,
Chen Jian
Edited by: Jian Chen on Sep 14, 2009 9:33 PM

Number range for trans./event type WA in year 2006 does not exist

hi
while posting stock in MB1C screen the following error has been faced by me, i hope a answer from any one of u.
thankyou
venuprasad

Hi Venu,
In the sytem there is no number range assignment for event type WA (Goods issues)in the year 2006. In SPRO -- Materials Management -- Inventory Management -- Number ranges for material documents -- Number ranges for Goods Issues/transfer posting -- For WA insert year 2006 and assign the number range for the year 2006.
Number ranges for material documents will be maintained year wise.
Hope this clarifies. If you have any issue. Post it back.
Thanks,
Viswanath

Number range of confirmation of service

what transaction code can we check the number range of confirmation of service.
thanks.

Hi,
You can create the number range from transction - SNRO assign the same in IMG.
or
In IMG under
Materials Management -> External Service management -> Number Ranges
-> Define Number Range for Service Entry Sheet
-> Define Internal Number Range for Service Specifications
-> Assign Number Range
Regards,
Naveen.

Number Range scenario...best way of handling?

I was looking at a possible scenario:
There is one university with 100 colleges under it which is implementing HE-R.These colleges offer 500 programs of study in all.( 100 colleges * 5 programs each).Each register around 400 students to a program around the same time( Total students=500*400=20000).
In this scenario,how will the university administrator register students in a way that using the number range,he can differentiate a student on the basis of his college and program?
Some options which came to my mind was that he would create 500 number ranges and assign the same whenever a student is to be booked to the respective programs.The other option probably is that the administrator would change the 'current number'in the number range interval node. Do send your thoughts on the same.

Yes, that is true for externally assigned ranges. However, if you use an internally managed number range, then the only thing you can change the number to is an externally managed number range. You could not change it to a number that is in any the INTERNAL number range.
The intelligent numbering is possible of course, but still introduces more problems than it addresses, and also much complexity, as you can see. Whenever an administrator pulls up a student record, all of the relevant organization and program data are displayed prominently in the student header. It is much easier to see that information directly than it is to remember the several dozen or hundreds of coded ranges.
Consider the analogy to general ledger accounts. Almost every legacy financial system uses intelligent G/L account numbering. Almost every customer that migrates to SAP starts off believing that those intelligent numbers are needed in SAP. In the end, though, it almost always becomes clear to all users (except for the most stubborn ones who will never be happy with any change whatsoever) that the SAP G/L structure is far more flexible and easier to report off of than any intelligent numbering scheme could be.
Perhaps in the legacy student system, the intelligent numbering is NECESSARY, because it is otherwise cumbersome and difficult to see the organization and program context of the student. This just isn't the case with SAP Student Lifecycle Management. We cannot take all the 'requirements' at face value. I would suspect that the real requirement is not 'We need intelligent numbering', but that 'We need to be able to easily and quickly ascertain the student's school and program'.

BATCH Management - External number

Hi
I am having a scenario where I need to activate the external number assignment for a batch in a specific plant. ( We do have around 50 plants)
Internal batch number and Automatic batch number assignment is activated at the client level. which is creating worries for me.
with activation of external numbers for batches , I do want to make this mandatory to put external batch at the time of MIGO for Raw materials and CO11N at the time of operation confirmation for finshed goods ( obvisously only for the materials having Batch management check activated in material master )
Grateful if somebody could help me in acheving this..
BR
Sumit

Hello Vikesh
Thanks for the reply.But bro..as I mentioned before also , i caant do the changes mentioned by you as its used by other 10 plants for the same client.
I need to do this for a specific plant only , and We dont want to create batch manually , system should create batch number with external number range for the movement typr 101 ( for raw materials at the time of MIGO and for finished goods at the time of prod.order operation confirmation in CO11N).
Pl coorect me if i am too ambitios for this ..but thts wht we r looking for,,
BR
Sumit Sharma

Batch Numbers Skipping in Internal Number range Assignment

Dear Gurus,
We have Batch Management at Material Level. For a Material, we are facing an issue in Internal Batch Number Assignment. Systems Skipping 15-20 numbers buffer in Internal Number Assignment, we want it to be in a sequence. In OMAD for BATCH_CLT, No of Numbers in Buffer is 0.
Kindly guide me why the system is doing this.
Regards,
Johi Kapoor

No its not working. I want to set my batch number range from client level to material level. Kindly tel me how can i do that....?

Query of batch number range

Hi experts
I found that I can assign a external batch number to a material manually,but in background I have not assigned an external number range for batch, who can tell me that's why?
thank you!

Hi,
It is not relevant with No. Range of Batch
Go to SPRO > Logistics - General > Batch Management > Creation of New Batches > Define Initial Creation of Data for Batch Master Transactions > Here for Material Type select option as "C" (Automatic / No Manual)
Also check in SPRO > Logistics - General > Batch Management > Creation of New Batches > Define Batch Creation for Goods Movements > Here for Movement Type select option as "C" (Automatic / No Manual)

Number range for Batch - urgent help

Dear Champs,
We need to have internal number range for batches for one plant and external number range for other plant. How & Where to assign number range for plants ?
Kindly suggest
Thanks
Rajesh

Mr Rajesh
You can maintain num range internal and external independently with out any customization or development if you run batch management PLANT level.
Where plant level batch mgmt., the batch number is only known in the plant in which it was created if the stock is transferred to another plant, the batch is unknown in the recipient plant and the system does not adopt any data
And you can define independent number range for each plant.
If planned at client level need to customize using the userexits avaliable.
Message was edited by:
Pavan Kodali

No number range found for 01 RP_REINR SP11--Travel Manager

Hi
While creating Travel request in in Travel manager i got this error messages"No number range found fo 01 RP_REINR SP!!-Travel Manager..Plse advice me how to resolve this..
Thanks&best regds
Shaila

In adition to task from Shailaja .. Consider this:
Please note that while defining your number ranges, the number must be two Digits i.e ( 01,02,03) , it must NOT be single digit i.e (1,2,3)..
I'd had the same issue, but with the two digits number it has been solved.
Regards,
Rodolfo

Number range in Solution Manager 3.2

Hi ,
we are using solution Manager 3.2 with oracle 9i and Bi 7.0 (development)
While we raise Solution Manager Ticket from BW Development system,it is
not mainatainig the proper sequence number(number range).Rest all other systems are maintaining it properly.Recently we have upgraded the Support Pack for that BW Development system.its seems like issue is happening after the SP upgrade.
Please guide us to resolve this issue
thanks in advance
George Varghese

Hello George,
The best possible thing for you now ( assuming that everything was working absolutely fine before the upgrade and that you now continue to have no issues with raising tickets in other satellite systems ) would be to find out the side effects of the SP applied..... or may be look for notes resembling your problem.....
SAP Marketplace is one the one you must look upto.....In the meanwhile just raise an OSS for the same..
Inspire ppl by rewarding..
Regards,
Anand.....

Can you please help me resolve this issue on Batch Management Completion. "Cannot Add row without complete selection of batch number." Message 29-77

'Another user or another operation modified data, to continue open the window again ' Inventory Transaction Log' (OITL)(ODBC-2039) (Message 131-183). If I click again on add I get the following message : 'Cannot add row without complete selection of Batch / Serial Nos. [Message-29-77]
Path:
Inventory -> Item Management -> Batches -> Batch Management - Complete form.
Before this I use Return Components on Receipts from Production as I am mistakenly issued it more than what was needed.
Were anyone be able to explain why it worked for certain items and not for others? I have successfully done “return components with some batches"

Hi Nagarajan,
I'm one of colleague of caterine, we only accessing the batch management-complete window, no other window is open, still the error occurs; see image below
Before that error occurs(in image); first error we encounter was batch number is already exist, then upon click add another person modified the window; but we tried to restore the db then try to add the batch number in different transaction like SI 1658(Goods Issue), and it is okay.. but on the SI 50003 which is Receipt from production we can't add it.
Hope you can help us.
Regards,
Lean

Batch management number ranges

Similar Messages

Maybe you are looking for