Batch management & process Order

hi gurus !!!
can we have qty divided in two batch numbers against same process order ??

Hi Kaushik,
You need to define Batch Strategy with number of splits "2", so that system will allow 2 splits for a component while Batch determination.
This is a defination basically for a combination of condition type and access sequence.
Hope this helps...
Note during automatic batch determination, if sufficient stocks of a single batch is existing, system default uses only one batch.
Regards,
Prasobh
Reward your points if this was helpful

Similar Messages

General Discussion - Best practice to manage Process order

Hi Experts,
Which is the best practice to manage process orders ?
1. Quantity Change - I can make quantity adjustment in R3 and APO.
2. Source Change - I can make a version change from order header . Also i can make a source change in APO by selecting a different PPM. Which is the best option.
3. Re Read Master Data - Best practice to read master data is from R3 or APO ?
I feel for all the above scenarios process ordes should always managed in R3. But still wondering why we have the same flexibility in APO too ?
Can

Hello,
we are just migrating from 4.6c to ECC 6.0 and I have a couple of workflows to adopt.
For background steps I defined in the corresponding BOR methods an exception to be fired when no result is available (e.g. no mail address available). Normally, I defined them as temporary errors.
I activated in the WI outcome section the line for this exception and so the workflow processed this branch when the exception appeared. It worked fine.
Now, in ECC 6.0, the same workflow get stuck in the WI. The exception is fired (I can see it in the log as "Error message"), but the WI is still in status "in process". It doesn't continue with the error outcome branch.
Is this a new logic in ECC 6.0? Do you have any idea what to do? I used this logic some dozent times in different methods and workflows and it gives me a headache if I have to change everything ...
Thank you!
Best regards,
Thomas

Reservation of component Batch for Process order

Hi PP Guys,
I did the batch determination of a particular component batch in process order, but when I try to create another process order system proposing the available qty without considering the earlier reserved batches.
I want to view only the batches which are free from any reservations during batch determination in process order.
Example: If Batch "A" having qty 1000 kg in unrestricted stock.
I have created a process order and did the batch determination for the quantity of 900 kg, when I create another process order for the same material system should propose only the available component batch qty of 100 kg only, but system still proposing the un-restricted available qty of 1000 kg.
Please advise me the solution to map the scenaio.
Thanks in advance.
regards,
Purna

Hi,
Check whether Reservation is included in your checking control(T.Code OPJJ).
If not then correct it by activating check box for Include reservations.
Regards,
Dhaval

Want to Create batch in process order at a time of Operation release.

HI,
We are going to release operation one by one for process order. There are 4 operations in my process order. I want to create batch in process order header when i release first operation.
Is there way i can set the Production Scheduler Profile to PREL to create batch at header level.
Thanks in advance!

Thanks for the Information,
to my understanding, all the Operation controls are in Operation control key.
There is No Batch creation functionlaity assiciated with Operation control key.
Look for a user exit to create the Batch with the PREL of the Header or REL of the 1st operation.
Regards
Ratan

Automatic Creation of Batch in Process Order Confirmation

Hi Guru,
What are settings required to set the batch creation automatic during the confirmation of the process order? The header material is semifinished and batch management is ticked in the material master. BOM has been created. In the present scenario, few
Regards,
Raja

Hi,
You can do that in T Code CORW.
For the required production scheduler select the batch creation for process order.
Also in the Assignment tab of the process order, there is a field for batch, next to it there is a Create button. Click that, you will get the batch number in that field.
Hope that helps.
Regards,
Rohit.
Added: I apologise, its not the Assignment tab in process order. It is Goods Receipt tab.
Edited by: Rohit Chauhan on Aug 3, 2009 9:42 AM

Stock of Batch in Process order

Hi,
The Requirement is as follows:
Material A is used as a component in Process Order and is managed in Batches. The requirement is the system should show the the available batches with stock when F4 is done for Batch field in Component overview of the Process order.
Regards,
Prasad

Hi Dhaval,
There is no search filter as Batches in Unrest.
The following search filters are available:
1. Searches for batches via classes
2. batches for plant material
3. batches for Material
4. Batches for valuation type
5. Valuation types for the material
6. Batch work list
7. original batches for plant material
8. Original batches for material
9. Batches for vendor
My requirement is to get those Batches which contains stock with unrestricted status. ie batch list with expiry as mentioned by you.
Regards,
Prasad

Batch Management Process Flow Diagrams

Hi,
please provide the process flow diagram of batch mangement in MM.
any links or documents....
It's urgent...
Thanks
AK

Logistics general - Batch Management
1.1. Specify Batch Level
Menu Path Enterprise Structure> Logistics General> Batch Management --> Specify batch level and activate batch status management Transaction OMCT
1.2. Batch Number - Activate Internal Number Assignment
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Number Assignment --> Activate internal batch number assignment Transaction OMCZ
1.3. Batch Creation - for Goods Movements
Menu Path Enterprise Structure> Logistics General> Batch Management --> Creation of new batches --> Define batch creation for goods movements Transaction
1.4. Characteristic Value Assignment -- Update Standard Characteristics
Menu Path Enterprise Structure> Logistics General> Batch Management --> Characteristic Value Assignment --> Update Standard Characteristics Transaction
1.5. Activate Batch Classification for Goods Movements in Inventory Management
Menu Path Enterprise Structure> Logistics General> Batch Management --> Characteristic Value Assignment --> Valuation for goods movements --> Activate Batch Classification for goods movements in Inventory Management Transaction OMCV
1.6. Batch Determination Condition Table(Cross Client)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Condition Tables --> Define production order condition tables Transaction OPLB
1.7. Batch Determination Condition Table(Cross Client)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Condition Tables --> Define SD condition Tables Transaction V/C7
1.8. Batch Determination Access Sequence(Cross Client)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Access Sequences --> Define Production Order Access Sequences Transaction OPLF
1.9. Batch Determination Access Sequence(Cross Client)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Access Sequences --> Define SD Access Sequences Transaction V/C2
1.10. Batch Determination Strategy Types
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Production Order Strategy Types Transaction OPLE
1.11. Batch Determination Strategy Types
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define SD Strategy Types Transaction V/C1
1.12. Batch Determination Batch Search Procedure
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define IM Search Procedure Transaction OMCY
1.13. Batch Determination Batch Search Procedure
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Production order Search Procedure Transaction OPLG
1.14. Batch Determination Batch Search Procedure
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define SD Search Procedure Transaction V/C3
1.15. Batch Determination Batch Search Procedure Allocation
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Allocate IM search procedure/activate check Transaction OMCG
1.16. Batch Determination Batch Search Procedure Allocation
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Assign Search procedure to production order Transaction OPL8
1.17. Batch Determination Batch Search Procedure Allocation(SD)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Allocate SD Search procedure Transaction V/C5
1.18. Batch Determination Activate Automatic Batch Determination(SD)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Activate Automatic Batch Determination in SD -->For delivery item categories Transaction V/CL
1.19. Batch Determination Batch Selection Class
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Selection Classes Transaction CL01
1.20. Batch Determination Sort Rule
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Sort Rules Transaction CU70
1.21. Batch Determination Make Settings for Batch Where-used list
Menu Path Enterprise Structure> Logistics General> Batch Management --> Make Settings for Batch Where-used list Transaction OMBB

Splitting batch in process order

HI friends,
How I can split bach in process order ?
Regards,
Chetan

Hi.
Please Refer Below SDN thread.
[Batch split|Batch determination for component in co11n;
Pradeep
Edited by: Pradeep Kumar on May 24, 2008 10:49 AM

Header batch no copy to component batch in Process order

Hi,
I have following requirement...
we create process orders with COR1 in PP module.. then we assign the batch no to in the goods receipt tab as shown below..
Now when we save the Process order system has to automatically assign the same batch no to one of the component automatically as shown below..
What user exit or enhancement I can use for this..If anybody worked on this can you help me out...
Thanks
Kumar

Hi All,
Can u suggest me any user exits, BAPI or BADI's for this...
Thanks
Kumar

Update batch for process order in change mode

Hi All ,
I need to update the batch number(which will be external batch number given by me ) in COR2 (process order change) transaction ,under the tab Goods receipt .
Is there any bapi which achieves this ?? pls reply
Thanks .

try use BAPI_RESERVATION_CHANGE

Create batch for process order

Hi,
I have a requirement to create batch for the process order while releasing/ creating it.
PLease let me know, which BAPi to be used.
Thanks & Regards,
Kalyan Venigalla.

Hi All ,
Pls reply
Thanks .

Header material batch copy to component in Process order

Hi,
I have the following requirement...
We create process order and assign the batch to process order manually..now during saving of the process order system has to copy batch of the process order ( header material ) to the one of the component in the batch automatically, as this is component is by product which comes to stock along with header material...What is the enhancement/ User exit can be used to meet this requirement...
Thanks
Kumar

Kumar.
What should be copied? The header batch or some/all of the characteristics of the header batch to a new batch for the component?
Anoop

Batch reservation & Allocation in process order

I am allocating batch to process order components(for active ingridient)While I am allocating the batch I am able to select the batch which has all of its quantity reserved,which is not desireble.Any solutions please??/
Eg.In MMBE my batch stock(say for batch AA11) is as follows:Unres stck 100 & reserves 100
If I am determing batch for a different process order where this component is used,I am able to select the same batch,even though it has no open quantities.
Please suggest

Hi Rele,
Please check in CO09 transaction for the availability of this batch stock whether it is free or confirmed to any other component like.
Regards
R. Senthil Mareeswaran.

Issues during Component Batch Determination for Process Orders

Hi,
I am encountering a strange issue during component batch determination of process order.
1. During creation of process order, when I execute batch determination, systems does determination based on strategies we have set and when I click on Copy it gives an error
"Log cannot be saved: Object/subobject not specified"
Message no. BL201
*Diagnosis
Log save cancelled because at least one log contains no object or subobject.
Object and subobject are needed to classify application logs because there are several log types. Only a few logs are managed in main memory at runtime, so this classification is not needed.
If the logs are to be saved in the database, object/subobject must be specified for later retrieval.
Procedure for System Administration
Object/sub object can be passed when a log is created (function module BAL_LOG_CREATE) and changed with BAL_LOG_CHANGE.
The possible values for object and sub object must be configured in transaction SLG0.*
If I save the order with CRTD status and come back again in change mode and do determination, It works fine.
Again when the order is in REL status and do the determination, It gives the same error.
This happens only for a specific plant, In other plants batch determination works in all scenarios.
I checked for all plant related Config for batch determination and coudn't find any discrepancies.
Please advise how to resolve this issue. Thanks in advance for your help
Regards,
Aheesh

There Is no direct solution for your requirement just try this work around.
While defining the batch determination search strategy for process order in COB1, there is one column Quantity proposal where you can attach the Routines (This is written in ABAB code ) make use of this, define New Routines with ABAB help to fulfill your requirement. Try this if found useful award full points.
Regards,
Ajay Nikte

At the time of Process order creation Batch determination

Dear All,
When i am creating process order at the time system not allowing me to execute batch determaination after release only it is allowing me to do.
My requirement is At the time of order creation i want assign batches ( Execute Batch Detrmination)for the material.
how to do this one, kindly hel me
Regards,
s.sakthivel

Hi sakthivel
Go to OPKP (Production scheduling profile) txn code and select in Batch management tab Automatic Batch creation at order creation (1) and check this profile is assigned to material in work scheduling view
Regards

Batch management & process Order

Similar Messages

Maybe you are looking for