Batch management separately for packaging / fuel material

Hi experts,
to be very clear , batch management is activated for all type of materials like raw material and finished goods.
For packaging material and fuel material i didnt activate batch management.
my issue is to maintain batch for packaging and fuel material with batch no. separately.
if any customization or through any exits / badi ?
i also maintain for stock at batch level .
regards
dks

Hi,
If batch is not activated for Material type packaging / fuel material...and stock /PO/GRN/IV exists for those material, then its impossible to to acitivate batches for those materials whose stock /PO/GRN/IV exists ...
If you want to maintain batches for these material types then you have to reverse all documents and you have to clear all stocks, which will be tedious job.
Better from future when ever you create new material for those material types, then activate the batch management check box.

Similar Messages

Batch Management deactivation for material master.

Hi Guys,
We are trying to change material master(MM02) by deacivating
batch management in Purchasing view.it is not accepting us to change the material masteer.
Note: Stock of this materila and plant combination is zero.
it is giving errror as below.
Batch management requirement cannot be changed; choose "Display errors"
Please help out regaring this.
Warm Regards:
Tata Reddy

Hi Csaba,
Material Master Maintenance
The batch management requirement cannot
be changed for the following reasons:
Stocks already exist at plant level.
Plant SLoc
DT01 OL02
Batches already exist.
Warm Regards:
Tata Reddy

Batch management change for material

Hi gurus,
can anybody please help me with this. We have some stock for a material in vendor consignment status. We want to change this material to batch management. How can we do this?
Thanks
Anusha

you have to issue the stock in previous period and current period.
obtain previous period stock in MM03 > plant stock view
you can use movement type 201 to do this.
then you can try to change the Batch managment indicator.
if you still get an error, then you may have to archvie the special stock records first.
this can be done with transaction SARA - object MM_SPSTOCK.
The easier and quicker solution is to create a new material master.

Default the Batch Management flag for some Material Groups

Hi Gurus,
Is it possible to Default the Batch Management flag (under T code MM01) based on the material grops.Like for example if the Material groups -01 then the default value for batch managemnet flag should be checked.
Our OMCT set up is -Batch unique at the Client level for a material
Edited by: Ruchi Dutta on Oct 22, 2008 11:55 PM

Hi Ruchi,
have you got the solution ??

Batch management indicator for ERSA

Hi Friends,
When I tried to activate batch management indicator in material master of ERSA material I am getting following error messege <b> Batch management requirement cannot be changed; choose "Display errors"</b> .Please help me wat is mean.
Regards,
Chetan

Hi,
Changing the status of the material from Uncheck to checked or viseversa is possible only if the following conditions are met
1 Check the Status of material MMBE
2 There should not be any open Purchase Order Use SE16 & Table EKPO Give the material number for which we have to find the Open Pos; Alternateively ME2M can also be used
3 There should not be any Open Production Order Use SE16 & Table AFPO Give the material number for which we have to find the Open Production Orders
4 There sould not be any Sales Order Use SE16 & Table VBAP Give the material Number for which we have to find the Open Sales Orders
5 There should not be any Purchase Requistion Use SE16 & Table EBAN Give the material Number for which we have to find the Open PRs
6 There should not be any Stock in Transit MB5T
7 There should not be any Plant availability Stock MB53
8 There should not be any Reservation MB25
9 Previuos Period Stock should be zero Use MM03 with Plant Stock & Storage Loc. View If Stock Exists follow the Procedure mentioned in next chapter to close
10 Stock requirement should be zero MD04
11 There should not be any open Delivery Use SE16 & Table LIPS Give the material Number for which we have to find the Open PRs
12 There should not be any open Warehouse Transfer Request Use SE16 & Table LTBP Give the material Number for which we have to find the Open PRs
13 There should not be any open Warehouse Transfer Request Use SE16 & Table LTAP Give the material Number for which we have to find the Open PRs
14 The Batch Corresponding to the plant has to be set for deletion indicator MSC2N
If previous period stocks exist, we can make a withdrawal posting as follows
1. Post the same amount to current period stock (for example, using
movement type 561) so that previous period stock and current period
stock are identical.
2. Make a withdrawal posting in the previous period for the stock
together with posting date (for example, using movement type 562).
If any of the above Stock Exists it has to be closed;If Any of the stock exists we cannot uncheck.
After closing all the open items;the related business documents viz Purchase Orders,Production Orders,Delivery,etc has to be Archived
Archiving has certain criteria while doing Archiving Process-- Systematic Archival is the Key factor i.e relationship diagram has be met.
SAP Note Number 533383 - Resetting batch management requirement
This is similar to changing of Unit of measurement.
Hence such criteria ought to be met.
Reward if found useful.
Regards,
Vengat

Batch management config for specific order type

Hi SAP gurus,
Below are my clients requirement.
They want to interduce batch management for few materials, but they want the same to be implemented only for order-to-cash sale. order type ZOTC.
When I tried to simulate the same, for other order type(Ex: ZOR), system is also asking to maintain the batch at the time of goods issue as the material is now managed under batch & not allowing me to do the goods issue for the delivery for which the refering order type is ZOR.
How can I configure the same, so that, for the same material,if order type is ZOTC then batch will be determined at delivery & for all other order types, system will not check the batch during goods issue if the batch field is blank in delivery?
Help me.
Manoranjan

Dear Manoranjan,
requirement doesnt seems either logical or possible.
When material is activated as "batch Management" in Material Master, then there is no way to maintain the stock without batch.
you have to have stock in batches only.
Next, when you are delivering goods in OTC sales, then in delivery system will ask from which batch goods has to be issued , because they are managed in batches.
So while delivering goods through OTC, you should either enter the batch manually or determine batch in del item category as in std.

Wants to activate batch management for a material which already had a Stock

hi,
i want to activate batch management for a material which already has a stock and open Purchasing documents.
is there any way by which we can do it without removing the same.
please help.

program name is RVBCONVMAT2BM
but i am doubtfull it will be delivered with standard SAP, you need to request you from SAP as they charge for this.
this program convert the material to batch and all relevant dependant documents will be updated with batch no.
Regards,
Pravin Mukkawar
pasting some description of the program
REPORT rvbconvmat2bm.
Report illustrates the call of function module VBZ0401_CONVERT_OBJECTS
which sets the batch management flag for one material including
depending objects. Function module VBZ0401_FILL_BUFFERS helps
improving the performance.
then logic......

Batch management active and inactive for same material

Hello,
We are planning to use one single material that should be managed for some SD flows and not managed for other SD flows (all depending of the sales doc type).
I know that the batch management is checked on the material level. Therefore we will need a development.
Any ideas of how we should handle this topic ?

Hi pat,
U want to de-activate batch management for one particular material or for total plant (2nd)?
If u want to activate batch management for second plant but still do not want to activate for a particular material, u can do thesettings in material master

Removal of batch management indicator from material master

I had removed all batch stock from material code but when trying to remove batch management indicator from material master system is giving the message "batches already exist"
Please suggest the solution.

Hi,
   The material is NEW and Batch Managed. No stocks, orders, batches are existing.
   If the Batch Management indicator is removed in Material Master, is there any way *to see/track the batch/lot * of the product.
Scenarios: Material is NOT Batch Managed
1.     How to track a batch received for Purchase order.
2.     How to track a Batch created in a Production order.
3.     How to track a Batch in Sales Order.
Thanks,
VB

Batch Management appearing mandatory in material master

Dear Friends ,
I am getting batch management tick mandatory while creating material master , In OMS9 for field sel grp optional 01 ,I have made field reference for mm01 as optional, but still its showing batch management mandatory while creating material master
Thanks in advance

Hi,
If you have checked Field reference ROH ( as material created with material type ROM & ROH assigned Field reference ROH),the field selection group 75 optional entry.
Then , now check *Field reference for material master in assigned to industry sector( the material created with) in t.code: OMS3 and here also make selection group 75 optional entry for *Field reference for material master in OMS9
Also make selection group 75 optional entry in OMS9 for for Field reference MM01 & 0001
Now try creating material master.
Regards,
Biju K

Automatic batch management for Production order receipt

Hello ,
I have a requirement to setup & activate Batch Management only for Production order Good Receipt . I am looking out for what all configuration / data setup will be required to complete this .
To start with I have following questions .
1. Whether such activation is possible only for Production order Good receipt - 101 mov.type
2. IF yes , is Batch management activation status be at material or plant level .
3. As I need automatic assignment , should I be selecting Internal batch management .
4. What should be selected for valuation for Goods movement in Inventory management.
5. Is it necessary to have batch determination by maintaining Condition tables / Access sequence
6. What would be standard Class / characteristics to be maintained for automatic determination.
Also I will have to work with the running system where Material are already active and have stock in system . What precautions will I have take if I have to activate the Batch Management in a running system.
Appreciate all your expert advise.
Regards,
Lawrei

Thanks Adler for your comments .
With reference to your point , need further clarifications
1. If batch management is selected to material , this means that it will be active for all movement types for Inventory and cannot be restricted to 101 mov.type .
I see that in config node
+Define Batch Creation for Goods Movements+
    +Using this function, you can define for each movement type whether a new+
    +batch is created for a goods receipt and how it is created.+
Can I not restrict batch creation only for 101 movement , but again here I don't have options to select only for Good receipt for order - Tran/Ev type - WF .
& what about below config node
+Define Batch Creation for Production Order / Process Order+
    +In this step you can make the following settings in batch management for+
    +the existing production control profiles:+
Is it possible in this node .
Please advise.
Regards.
Lawrei

How to remove Batch Management in the Material

Hi All,
The Batch Management indicator for a Material was accidentally activated, thus upon goods movement the system required user to enter a Batch Number. The user, not knowing the implications, entered a Batch Number.
Now we want to remove the Batch Management indicator, I already asked the user to reverse the goods movement posted and have the Batch Number flagged for deletion at both Plant and Storage Location Level via MSC2N.
MM02 still won't allow the removal of the tick mark in the indicator.
There are options I have looked at:
1) Create a new Material Code in place of the old one.
2) Archive the Batch Number then try to remove the tick mark via MM02 - will this even work out?
But the priority is still to retain the same Material Code. Is there any other way/option?
Thanks a lot!!! =)

It is a little painful but here are the basic steps.
Remove all stock.
Cancel all demand, no requisitions, no purchase orders,
production orders etc. Transaction MD04 must be empty.
Use transaction MSC2N to place a deletion indicator on every
past batch for that material prior to the end of your fiscal period or
month.
Run transaction MM74 to archive the "flagged for deletion" batch
numbers.
In the next period or month go to transaction MM02 and remove
the batch flag from the material master.
hope it helps

Turn on batch managed for materials

Hi Expert!
Is there anyway to turn on batch managed for material after it has been used for some times?
Please advise.
Thanks.

Hi,
You can use the Batch Management functionality, even after having some stock for a material without Batch classification. After activating Batch Management, when you enter goods movements for materials, then onwards you must enter the batch number in addition to the material number.
Before you can manage batches of a material in stock, you must first specify in the material master record that the material is to be managed in batches for the specified plant. To do this, you must set the batch management requirement indicator in the material master record (for example, in the Purchasing or Storage view).
Regards,
Narayana.

Spilt valuation with batch management?

Gurus,
I want to activate split valuation with batch management..
i know the configuration of doing split valuation..
but, i need help on batch management configuration...

hi,
Why do you want both at the same time??
Either split val. or batch management independently can solve your issues...
Please let me know the reason...
For split valuation :
To select split valuation ('OMWC'), proceed as follows:
1. Determine the valuation categories and valuation types that are allowed for all valuation areas:
global valuation categories via menu "Goto --> Global Categories"
global valuation types via menu "Goto --> Global Types"
2. Allocate the valuation types to the valuation categories.
a) Select "Goto --> Global Categories".
b) Position the cursor on a valuation category and select
"Goto --> Global Categories --> Assignments --> 'Types->Category'".
c) Activate the valuation types you want.
3. Determine the local valuation categories for each valuation area.
a) Select "Goto --> Local definitions".
b) Position the cursor on a valuation area and select
"Goto --> Local Definitions --> Allocate Categoires->Org.units (button Cats->(OU)".
You obtain a list of the global valuation categories.
c) Activate the categories to be used in this valuation area.
The system creates the local valuation types based on the allocations under point 2.
Only now can you create a master record with split valuation.
Specifying Split Valuation by creating Material Subject to Split Valuation
1. Create a material master record, selecting the Accounting View 1.
2. Enter your data as required on the Accounting data screen, specifying a valuation category.
(If you can't find the valuation category field, it might be hidden, use OMSR to define the Field Groups.
Look for the field MBEW-BWTTY for Valuation category).
3. Be sure that the price control indicator is V for moving average price and enter a moving average price.
4. In the case of split valuation, you can create only one valuation header record with price control V because the
individual stock values are cumulated, and this total value is written to the valuation header record. This is where the
individual stocks of a material are managed cumulatively. To do this, fill in the Valuation category field on the accounting
screen when you create the material master record and leave the Valuation type field blank.
5. Save your data and the system creates the valuation header record.
6. The initial screen appears.
7. Extend the material by creating new material master records from the Accounting view 1. For the first material, specify a
valuation type in the Organizational Levels dialog box and enter the respective accounting data on the data screen.
Proceed likewise for the other materials, distinguishing between them by valuation type. To do this, call up the material in
creation mode again. Due to the fact that a valuation header record exists, the system requires you to enter a valuation
type for the valuation category.
8. Repeat step seven for every valuation type planned.
You want to valuate the stock of material XYZ that you obtain from manufacturer A in Los Angeles at a different price than the stock you obtain from manufacturer B in Detroit. In this case, the valuation category is H for origin. Your valuation types can be LOS ANGELES and DETROIT.
If a material is subject to split valuation, every quantity (sub-stock) of this material must be assigned to a valuation type (for example, country of origin).
For every valuation type, there are two types of data in the system, as follows:
Valuation data (for example, valuation price, total stock quantity, total stock value), which is defined for every valuation type at valuation-area level and applies to all dependent storage locations.
Stock data, which, like batch data, is managed separately for each storage location. If a material that is subject to split valuation is also subject to management in batches, its stock data is not managed by valuation type, but rather by batch. Every batch is assigned to a valuation type.
The stock quantity, stock value, and valuation price for all valuation types are managed cumulatively at valuation-area level
Regards
Priyanka.P

Batch Management report Issue.

Hi Friends,
I have a question on batch management report, for detailed information please see the steps below
Step 1 : I have material X and Y created with class u2018XYZu2019, and characteristic value temperature 10 u2013 100 c
Step 2 : I have done Goods receipt for both the material
Material document     Material     Batch Number     Characteristic Value
123          X     TEMP1          10 C
124          X     TEMP2          10 C
125          Y     TEMP3          10 C
126          X     TEMP4          20 C
127          Y     TEMP5          20 C
I have two questions now?
1.     Is there any report to find out the list of materials with characteristic value 10 C?
2.     is there any report to find out list of batches for 10 C?
Thanks and Regards,
Chalaa

There is no standard report for your requiremet, go for ABAP development.

Batch management separately for packaging / fuel material

Similar Messages

Maybe you are looking for