Batch material classification

Hi,
Who knows where batch and material's classification
data is stored (wich tables) ?
Regards,
Greg.

MCH1-MATNR, MCH1-CHARG
LIPS-MATNR, LIPS-CHARG
These two tables MCH1 and LIPS have the necessary fields.
Regards,
Pavan P.

Similar Messages

Initial load of material classification

Hi,
We want to start using GTS to maintain tariff codes and to assign materials to tariff codes. We will start off with loading tariff codes in GTS from a dataprovider. However, we do not want to start from scratch with assigning materials to tariff codes. This information is already available in our SAP system. Does GTS provide a way to import the existing SAP material master data and load it into the material classification in GTS? If not, what is the best way to start this effort?
Regards,
Ed

Hi,
There is standard transaction where you can do mass classifications in GTS but i think there is a limitation to 3000 products at a time and in my view, it is not very effective if you have hundreds of codes to be assigned to products and it is very time consuming..
Alternatively, you will have to build a customised program and get all classifications saved in text file and load them up which is what i have done.
In my view, after implementation of GTS, tariff and commodity codes ( Include Classifications ) are supposed to be maintained in GTS by ITC and transferred over to Feeder system ( Commodity code is the only master data to be transferred over from GTS to Feeder and there is a standard transaction for doing initial transfer ).
Bad point about this standard is you will need to ask your Basis to activite the change log file in system to keep track when the commodity code is transferred.
Thereafter, you must have batch jobs running regularly at GTS and Feeder to do the transfer.
Im new in GTS so what i have said might not be entirely correct. Im still learning..
Thank you.

Loading material classification

Hi,
I am trying to load into BW data from Material Classification and cannot find a standar extractor.
I need to load the class, characteristics and their values in relation with each material.
I found out the 0CLASS_TYPE and 0CLASS_NUM but i cant get the transactional data for the values and link them with the material.
Any help or documentation will be of help.
Thanks a lot
Ignacio

Hi everybody:
I'm uploading too classification data. Could anyone send me this wonderful document to [email protected]
I'm trying to upload classification data for class type 001 (material) and I reach it, but I have some problems with 023_batch. I've modified 0BATCH by permitting attributes (this attributes are R/3 characteristics). DataSource comes from MCHA table. Material is key field in this table, and when I upload batch master data, system says me that there are duplicated records. But really they are no duplicated.
Well, is a little bit confusing, but if somebody knows the solution... please say me.
Please, do not forget send me the document.
Kind regards, and thanks in advance.

Batch Master Classification View - Inconsistent button active

Hi
We are encountering a problem of the Inconsistent button getting active in the Batch Master Classification tab (Material is batch controlled). We know the reason why this is getting active : Due to a wrong inbound value for a field called 'Sterilization Site' in the classification data (data element: ATWRT) through an interface from a legacy system.
We also know the solution to get around this: Go into the batch master in edit mode and delete the inconsistency by clicking on the Inconsistent button and then the delete button on the pop-up screen which gives the inconsistent value.
My requirement is: <b>How do we identify all the 'inconsistent' batches in the system?</b> Is there a way to identify a batch having an inconsistent characteristic value? (inconsistent value => value not existing in the allowed list of values for the particular characteristic)
When I try to do a F1 on the 'inconsistent' button, I get a help screen giving "Program: SAPLCHRG; Function: VCON".
Thanks
Chandra

Steve,
You have given me the right solution, but in this one particular case that I am tracking, I think there is an aberration.
I've got an output of all batches by using the option 'Show Incomplete Status' in CL2A. But this particular batch has the 'Inconsistent' button active, yet the classification status is showing as 'Released'
Any idea how to deal with such batches and extract this information?
Regards
Chandra

Find the Matrox Batch under Classification

Hi Friends,
i am facing one problem in retriving matrox batch under classification data...
previous report retriving the SAP internal Batch and shows it in the report from MSEG table according to ordernumber(AUFNR), material number(MATNR)...
instead of this batch i need to display the customer batch in classification
suppose i have done transaction for one material#ABC in XXXX plant, Batch is 12345 like this....and matrox batch nder classification#Z_MATROX is 54321
at present my report dispalying 12345...but i need 54321...so how can i retrive this field...
matrox batch value is available 54321 is available in AUSP table field ATWRT
i found some solution but i am not able to link that one to order number(AUFNR)
i am retriving matnr, plant and cuobj_bm from MCHA table and objek,atinn, atwrt from AUSP table throw inner join by comparing cuobj_bm and objek
so here my problem is how to link to that matrox batch to order number
thanks...
Muralidhar Reddy Nara

hi Anji Reddy,
what are the fields i need to pass in Function module CLAF_CLASSIFICATION_OF_OBJECTS,,,
i tried with this function module and use mcha, inob and ausp tables to retrive matrox btch...
could you please expalin for the following issue...
please urgent...

Material classification issue

hi all ,
    I have to show my material classification on my smartform.
    when i go to MM03 , I could see one of the classification value is 01.01.2009 type date .but when i use a function to get all classifications , i found that i could get all the classification values (which type is CHAR) but not this value 01.01.2009(type DATE)
the field name for classification value in smartform is ATWRT.
    so , how should i got the value of which type is DATE via the function, please guide me .
regards
Kevin

Hi kevin,
U can get the required date from function module 'CLAF_CLASSIFICATION_OF_OBJECTS' .
here u need to pass material & batch no.
The table returned from this FM contains the characteristic data, in ur case u can get data from AUSP1 field by using respective characteristic name.
Regards,
Rishikesh

Material classification Report

Hi Friends,
We have a requirement on material classification.
Today in legacy system we are getting the Material and inventory report on material classification, so we need same thing in SAP.
Ex : Char 1 Colour  red, blue, Green
Char 2  Temprature  10 C, 15 C, 20 C
Material 1  Red, 10 C
Material 2  Red, 15 C
Question 1 :
I need to know, in which table material classification information is stored.
Question 2 :
In which table values Red, 10 C for Material 1 is stored?
Question 3 :
Is there any standard report to get Material and Inventory report?
Regards,
Chala

Hi
Try this thread
Batch Classification Data Report
Regards
G.Ganesh Kumar

Batch & Non-batch material - 1 mat. doc - 2 EI automatically

Hi,
I am facing an issue while capturing Excise Invoice (EI) at depot.
If non-batch material and batch material are combined into one material document which is generated after post goods issue (PGI) to create EI, two separate Excise Invoices are getting generated automatically.
But while capturing Excise Invoice for both materials at depot, I am NOT able to capture in T-code J1IG by Goods receipt material documents.
How to handle such case? Could you give us some suggestion?
Thank you in advance.
Best Regards
Anbu

Does the ext directory have the php_oci8.dll? In the original steps the PHP dir is renamed. In the given php.in the extension_dir looks like it has been updated correctly. Since PHP distributes php_oci8.dll by default I reckon there would be a very good chance that the problem was somewhere else. Since this is an old thread I don't think we'll get much value from speculation.
-- cj

Error While Creating Material Classification Characteristic DataSource -

Hi All,
    I am creating the Material Classification DataSource 1CL_OMAT001 with CTBW in R/3 with the following info:
Basis DataSource = 0MATERIAL_ATTR; Client = 200; Class Type = 001;
Obj table = MARA; DataSource Type = ATTR, DataSource = 1CL_OMAT001
I have added all the characteristics with 'New Entries' button and the following are the details after saving it:
   DataSource = 1CL_OMAT001
   Characteristic Name = ABCDXYZ
   Item No =   '    ' (blank)
   Maintain Status = N
   Characteristic = 1CL_AABC001
   Typ = CHA
   While adding the MATERIAL_GROUP as characteristic it got an error because of Reference Characteristic since it is reference to Table MARA. Finally, I didn't add it.
   When I click the 'Generate' button to generate the DataSource then it is giving the error of <b>'BW Metada is incomplete'</b> (CLBW008).
   What is wrong with it and how could I fix this problem, please ?
   Thanks in advance.

I am not too sure but this might be the cause of error. Data doesn't need to be in client 100, but the characteristic needs to be defined in the class if I remember it correctly.
To do a quick check, open report program RCLBW_STRUCTURE_GEN in SE38, there is a call to FM RSA1_SINGLE_OLTPSOURCE_GET (around line 169) put a breakpoint there in the editor (display).
Now run your CTBW generation, it should stop at the breakpoint. You should check the value of field GT_CLBW_SOURCES-IOBJNM in the debugger - it would likely be the characteristic name.
Now, go to SE37, do a single test of FM RSA1_SINGLE_OLTPSOURCE_GET, and specify this same value for field I_OLTPSOURCE and execute. You will likely get a sy-subrc of non-zero.
Repeat this in client 200, check sy-subrc.
If you are getting sy-subrc 0 in 200 and non-zero in 100; you will either need to create the classification in 100, or generate it in 200.
If this doesn't work, let us know.

Error while generating material classification data source in R/3

Hi,
I am trying to generate the data source for material classification in R/3.
I have created the data source entry in CTBW and added the classification fields required for the data source. But while generating the data source i am getting an error, which says "BW Metadata is incomplete".
Is there any step, that i have missed? Please advise what needs to be done.
Thanks,
Manoj

Hi Santhosh,
The note seems to be quite old and may not be applicable since we are on the latest support pack.
We are using two different clients, one for configuration and the other for test data.
Thanks,
Manoj

Batch with classification at the time of inbound delivery

Dear all,
How do I create batch with classification at the of
inbound delivery.
Thanks in advance
Mrinmoy Chakraborty

Hi,
Go to SPRO > Logistics Execution > Shipping > Deliveries > Define Batch Creation Controls in Inbound Deliveries > Here select option 3 for the Item category of Inbound delivery (for e.g. ELN)
And during creation of Inbound Delivery (VL31N), under "Stock placement" Tab, select the line item and click on "Batch creation" on the down of the screen.
Define Batch Creation Controls in Inbound Deliveries: - You can use this activity to set controls for batch creation in the inbound delivery.
Define for each desired delivery item category how batch creation, batch classification or expiration date checks should be carried out in inbound deliveries. You can make the following settings:
- There is no batch creation, no valuation of the class characteristics of the batch and no expiration date check.
- Batch creation is possible in the inbound delivery, but there is no valuation of the class characteristics of the batch and no expiration date check.
- Batch creation in the inbound delivery and valuation of class characteristics is possible, but there is no expiration date check.
- Batch creation in the inbound delivery, valuation of class characteristics of the batch and the expiration date check are all possible.

To load material classification from SAP R/3 to BI 7.0

Hi,
Theres a requirement at my end to load material classification data (data that u get to see in MM03 in the 'Classification' tab for a material) from R/3 to Bi 7.0
I did see a few threads on this; tried it out; in vain. Can someone please forward me a step by step guide to achieve this requirement?
Thanks in advance.
Regards,

HI ,
Pls check the following links for LO EXTRACTION:
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
**pls assign points if links are useful*
Regards
CSM Reddy
Message was edited by:
CSM REDDY

What is the impact - Activating Change Logs for Material Classification Dta

To activate Change Logs for Material Classification Data I must first set the flag for "Multiple Objs Allowed" for the Class Type 001 Material Class. I am curious of what the impact of setting this flag will be. Also, is there a way to measure the DASD impact of activating the Change logging for this data.
Thankyou
Kevin

In addition to the performance impact the process of turning on Change Logs for Classification data will convert the tables KSSK and AUSP to use an internal SAP number as a key instead of the Material number. This will cause problems for any custom programs that access those files directly and expect the material number to be the key. This file conversion occurs during the execution of program RCCLUKA2 which is used to Flag the change logs for existing records. This can be reversed by running report RMCLINOB. Because of the above impact we decided here to NOT implement this change in production.

CIF of material classification data

Dear Experts,
Since a recent technical upgrade to our systems, I have seen a change in behavior of the integration of material classification data from ECC to SCM. Before the upgrade, classification data transferred with the initial CIF of the material. If material classification did not exist on the ECC material at the time the material was added to a new integration model and activated, we "missed the boat" so to speak. Classification would not automatically transfer (CIF) to APO when if finally was loaded in ECC, even if the application area/integration models were correct. As a work-around, we would be forced to generate and activate a material model that specifically excluded the material, then generate and activate another material integration model that included it again. Then the classification would transfer.
After the upgrade, the opposite condition is true, the "initial CIF" of the material will not transfer material classification data at all, it will only transfer if the classification data is added/changed after the material itself is transferred to APO. As a work around for this, if the classification data is already (correctly) loaded in ECC at the time of the initial material CIF, we are changing the status of the material classification from 1 to 3 and back to 1, just to trigger a change, then the classification is transferred instantly to APO.
Are there configuration settings that will allow material classification data to CIF in both cases: with the initial CIF of the material to SCM and also in the event of a change and/or addition of classification data in ECC? Thanks for any advice you can provide.
Best Regards,
Jeremy

Dear Matt,
What you are looking for is achieved by downloading the customizing objects from R/3 to SRM.
This is a must before you download materials/services from R/3 to SRM.
Customizing objects are 4:
DNL_CUST_BASIS3 - This takes care of Basis settings in SRM for downloading.
DNL_CUST_PROD0 - This takes care of Material number conversions from R/3 to SRM.
DNL_CUST_PROD1 - This CO actually brings matl groups from R/3 to SRM as product categories.
The result you can see in trx COMM_HIERARCHY (not in COMMPR01 which is for materials/services.
There in R3MATCLASS you can see replicated and locally crated prod categories
and in R3PRODSTYPE you can see the material typs from R/3
DNL_CUST_SRVMAS - This takes care of Customizing: Service Master
The transaction for this is R3As in SRM
and you can monitor the same through R3AM1.
also you can check QRFC of R3 and SRM with SMQ1 and SMQ2.
The next step after this is material/service downloading from R/3 which is done with the same trx R3AS but business objects
Material and
Service_master
You can set fileter in trx R3AC1 for this.
BR
Dinesh
(Helpful? pl. award the points)

Urgent help with Material classification

Thsi is regarding data into BW for Material classification.
I am tryign to create the extractors as suggested in BW expert & in the forums posted by others.
I did create 1CL_0MAT001 .but i did nto understand where to add the charerceristics & further steps. I have aroudn 15 charecteristics.-also i did not completely understand the Process of creating via CTBW t.code.
It woudl be really great if someone could explain.
Can anyone pls help me with this.
This is realy urgent.

Hi Chris,
Choose the transaction SBIW (Customizing for the BW source system) and the menu path Business Information Warehouse  Customer-defined DataSources  Cross-application Components  Classification System  Maintain DataSources for Classification data.
To maintain a DataSource, proceed as follows:
Specify a Basis DataSource that has an InfoSource you want to enhance (for example, 0MATERIAL_ATTR). Choose a client, a class type, and an object table from which you want to transfer the classification data (for example, 100, 001, MARA).
Click on Save.
Then select the line in CTBW and select Characteristic.
Specify the characteristics that you want to assign to the DataSource. Click on the generate datasources. The DataSource is generated, and given a status (N = new, for a newly created DataSource, and R = ready, following successful generation) and a technical prefix 1¬CL_... is added to the name
A Metadata upload replicates the DataSource along with its relevant properties in BW, where it can be assigned to an InfoSource.
A Metadata upload on the InfoObject/source system level has to be carried out so that the DataSources created in the OLTP are also available in BW. You access this function by clicking the right mouse button on Source system for InfoObject  Replicate DataSources,
Hope that helps. If you need any other info kindly let us know.
Regards.

Batch material classification

Similar Messages

Maybe you are looking for