Batch monitor doesn't launch and doesn't exist at all :(
Hi,
I desperately need your help.
My problems started a couple of months ago when a less than 2-hour project in Final Cut was converted by compressor into a 6-gig file.
Following basic troubleshooting steps described in FAQ, I deleted user preferences and the program went back to normal.
Yesterday my 1 hour and 30 minutes project was converted into 5 gig file. My troubles started all over again. This time I also tried to delete user preferences but now it DIN"T WORK.
I decided to remove and reinstall compressor and Qmaster following by the steps described at
http://support.apple.com/kb/TS1888?viewlocale=en_US
All went well, BUT now when I export my project using compressor, batch monitor doesn't launch! And when I look into Applications->Utilities I don't SEE THE BATCH MONITOR program at all!
Maybe I have not installed the entire thing necessary for normal performance of the compressor application? (when I reinstalled compressor, I checked Compressor and Qmaster boxes only, and unchecked final cut pro, DVD studio pro and the rest of the applications I did not need to reinstall)
Please advise.
Regards,
Tatiana
P.S. I'm using FCP 5.0 not the newest FCP studio 2.0
Thank you for your reply!
Still trying to figure out what's going on.
I checked the option it IS on. Thank you for your suggestion, though.
Regarding Batch Monitor as a separate program, yes I know that I should look for it in the UTILITIES folder. But it is NOT THERE! How can it be possible if I reinstalled Compressor AND Apple Qmaster?
Any thoughts?
Maybe I did or did not delete some file(s) before the reinstallation? What should have I done before plugging in the installation dvd with the Final Cut Pro 5.0? I followed all steps described in the basic troubleshooting section on the Apple web site. Ironically, I got into even more trouble
I appreciate your help.
Message was edited by: VestaGirl
Message was edited by: VestaGirl
Similar Messages
-
Batch monitor doesn´t cancel a file
Hello
I´m sending some videos to compressor but I want cancel one of them and batch monitor can ´t do it. It always says " cancelling " but doesn´t do it. And I can transcode the other files because it is the first of themHave you tried to reset background processing? It is in the menu just below preferences. This should flush out the non-canceling job.
-
How to suppress data that doesn't exist at all?
Hi sap experts,
I have a mdb file like this,
CPoint
CPeriod
CDate
CHeight
CChange
CChangeT
CRate
CState
CNote
C1
1
2014/1/2
8.3003
0
0
0
C2
1
2014/1/2
8.3318
0
0
0
C3
1
2014/1/2
8.3151
0
0
0
C4
1
2014/1/2
8.2535
0
0
0
C5
1
2014/1/3
8.3146
0
0
0
C1
2
2014/1/3
8.3381
2.2
2.2
2.2
C2
2
2014/1/3
8.3341
2.3
2.3
2.3
C3
2
2014/1/3
8.3005
.2
.2
.2
C4
2
2014/1/3
8.4034
1.3
1.3
1.3
C1
3
2014/1/4
8.3174
2.3
2.3
2.3
C2
3
2014/1/4
8.3603
1.5
1.5
1.5
C3
3
2014/1/4
8.3837
1.4
1.4
1.4
C4
3
2014/1/4
8.376
1.2
1.2
1.2
C5
3
2014/1/4
8.3324
1.4
1.4
1.4
CPeriod 1: we measured 5 points' data.
But on CPeriod 2: for some reason, we only measured 4 points' data, no C5's data.
And on CPeriod 3: we measured 5 points' data, including C5.
Thus, i create a crosstab using the above data. It shows:
C5 on CPeriod 2 does not have data, I want to show it blank, not 0.0000.
How to do? (I have cancel the two options in Report Options,)
Thanks.
PS. In some extreme cases, Maybe in CPeriod 4, we measured 10 points' data, and the data in CPeriod 1.2.3 should show blank also.Exactly right!
True zero and zero-null!
But the "ToText" formula, has transform the number to .00, like below
I want 4 decimals.Thanks. -
Multiple Compressor/Qmaster problems...clusters and batch monitor launch
Hi All,
I am continuing to have problems with Compressor and Qmaster. My original problem was that I was trying to create clusters to speed up my workflow. My computer is the only computer in the network. The issue came up when I created a cluster and it would work fine if I dragged in a QT from outside FCP to process in compressor, but if I tried to export a QT from FCP to compressor it would fail. Yesterday as I was about to leave work I was trying to export stuff through compressor and the batch monitor wouldn't launch. Sometimes I could get it to, but the QT it was exporting would disappear once it was processed.
I've deleted the compressor/FCP prefs and I also tried reinstalling compressor/qmaster. I trashed all the files I was supposed to and it couldn't get rid of all of them because it said they were still in use. AHHH!!!! I'm getting a little frustrated. I called apple and in so many words, they said, "Well, that's what happens with Studio 2. Try reinstalling it."
Help! I'm on FCP studio 2.As mentioned in other threads, virtual clusters are very tricky to setup properly and, unless you're doing a lot of H.264 encoding there's almost no benefit in doing it.
I highly suggest that you (and anyone struggling with VC's) pick up a copy of "Compressor 3 Quick Reference Guide, Brian Gary" and get a solid understanding of the environment VC's create - and what they're really good for. -
Compressor 4 files not showing up in Batch Monitor
Appartenly Batch monitor doesn't work with compressor 4. Using a droplet and I can't monitor the progress. Any thoughts?
Batch Monitor got replaced by "Share Monitor".
Two ways to start monitoring:
1. check the "Automatically launch Share Monitor" in Compressor 4's Preferences
2. Nagiate intoi the Compressor 4 Package and there to /Contents/PlugIns/Compressor/CompressorKit.bundle/Contents/EmbeddedApps and start Share Monitor from there
Either way I recommend to stick it to the Dock once you've opened Share Monitor successfully. -
Droplet created in 3.0 running now in 3.5 doesn't submit to Batch Monitor?
I've got a droplet I created in FCS2 (Compressor 3?).
I upgraded to FCS3 and tried to use my droplet.
I get a window with 'Server: This computer - submitting 1 files'
But in the Batch Monitor I never see anything appear under 'This Computer'.
It's just a simple droplet to take a ProRes 422 HQ captured from an HV20 in their 24p in 60i format - that strips out the extra garbage and reverse telecines.
1st time I've tried to use it with Compressor 3.5.
How can I debug this?
Name: 24p
Description: Apple ProRes 422 10-bit video with audio pass-through. Settings based off the source resolution and frame-rate.
File Extension: mov
Estimated size: 73.75 GB/hour of source
Audio: multi-track passthrough
Video Encoder
Format: QT
Width: 1920
Height: 1080
Pixel aspect ratio: Square
Crop: None
Padding: None
Frame rate: 23.976
Frame Controls On:
Retiming: (Fast) Nearest Frame
Resize Filter: Linear Filter
Deinterlace Filter: Reverse Telecine
Adaptive Details: Off
Antialias: 0
Detail Level: 0
Field Output: Progressive
Codec Type: Apple ProRes 422 (HQ)
Multi-pass: Off, frame reorder: Off
Automatic gamma correction
Progressive
Chroma filtering enabled
Pixel depth: 24
Spatial quality: 50
Min. Spatial quality: 0
Temporal quality: 0
Min. temporal quality: 0I found the original droplet in my Compressor settings list, and created a new droplet from 3.5.
This time, when I dropped a file on it, it worked.
But - in case I need to convert a droplet from 3.0 to 3.5 (that doesn't exist in Compressor settings), is there a way? -
Batch Monitor shows no progress - qmaster doesn't seem to process anything
I've been using this iMac since my company bought it a year ago and haven't had trouble with compressor until earlier this week when it just stopped working - no error message no crash - its just doesn't process jobs. I haven't updated anything or added any weird software of which I'm aware. Unfortunately I don't have a time machine back up to return to. We have the extended apple care and I haven't reformatted and reinstalled everything yet, I'm desperately trying to avoid that as I've already had to do it once in the past few months and it put me back at least a week of productivity as it took several days to get everything reinstalled. The same is true for taking it to the local apple specialist - took them a week last time I dropped a computer off there.
Whether its a file that I'm opening in compressor or a project I'm exporting from final cut I can wait for 20 hours and no progress is made I've done a great deal of searching on these as well as other online forums and taken lots of advice given to other people with similar problems and nothing seems to work here's what i've tried in a rough order:
Checking for Updates
Resetting back ground processes
Deleting preferences (for compresser et al)
turning sharing on/turning sharing off
starting qmaster using terminal
restarting qmaster using terminal
checking qmaster's settings using terminal and setting 'rendering' and processing to 'on'
Reinstalling compressor,qmaster,qadministrator and batch monitor using Pacifist
When Reinstalling I never click the box to share processing on a network
I've tried starting jobs with it disconnected from my office LAN
I've tried Everything on the compressor troubleshooting basics page including deleting all files associate with compressor, qmaster, qadmin and even motion and reinstalling them.
after each reinstall I always update compressor as it wont even start in snow leopard without updating
I've checked in activity monitor - qmaster is running just fine, it appears.
If anyone has any more suggestions as to things that could be done, please offer them.try these initial things:
• check the QMASTER logs in /var/logs (or simply use the /applications/utilities/CONSOLE.app). IF its failing or stalled there WILL be a reason for it.
• look for QMASTER crashes logs...... you maybe not be able to red the dump but there will be a common thing in there somewhere...
• stalled?: maybe sitting in the ACTIVE QUEUE with PROCESSING, but doing nothing.. maybe one of the services has failed. I se an EMAIL address up in the compressor to tell if anything broke. works great!
• stalled?: maybe your set up the cluster maybe expecting MANAGED SERVICEs and you cluster is not SETup for that.lots of these things.
anyway, have a look in the console logs and post your stuff. Happy to help you with it.
I have found the latest qmaster and compressor with FCS3 is very good.
LAstly, I have had the ODD thing that utilises PERIAN plugins etc t sit and do nothing. PErian ends up dumping.. anyway all this can be worked around.
w -
Any ideas how to get this working? I donʻt have money to go buy a new monitor...
Unfortunately HDCP is a technical requirement for the playback of some movie formats, for example Blu-ray. If your monitor does offer this, make sure your cabling and connection type also supports it. If your monitor doesn't offer this, I'm afraid you may have to consider buying a new or additional monitor. Any other suggestions I could make are not permitted on this forum, I'm afraid.
I have this problem too. I have a 2005/2006 Apple Cinema Display that's still in perfect working order, but doesn't have support HDCP. I had to find an alternative way of playing back my blu-rays. -
I spent all night trying to fix this. It seems to me that someone has been trying to hack into my system with all of the random codes/lines in my terminal and i have all of his foreign IP addresses. And now i get this strange message that popped up in my terminal. Idk what it entirely means? I would very appreciate if someone could just walk me through this. Thank you very much.
First time poster. I have Macbook Pro. OSX. Just downloaded the new mavericks. I'm i have my firewall on. I stay secure. I run Netbarrier, Virusbarrier, IdentityScrubber.
I know something is a little odd or just doesn't make since about my activity monitor. Then my WiFi was hacked last night and this person was writing tons lines of commands/codes that i found in my terminal and my activity monitor doesn't look normal, and I've only been a mac owner for about a year now and i'm learning more and more but while trying to figure out what was going on this message popped up which concerned me the most. Any help would be most appreciated, thanks guys. I have my terminal full of his foreign ip addresses i noticed, and a lot of other commands and lines he wrote out that i definitely did not type myself. Can anyone give me a hand on this? Thanks
--- 192.168.1.103 ping statistics ---
10 packets transmitted, 0 packets received, 100.0% packet loss
Extol:~ FBI$ who
FBI console Nov 7 02:14
FBI ttys000 Nov 7 04:33
Extol:~ FBI$ whois
usage: whois [-aAbdgiIlmQrR6] [-c country-code | -h hostname] [-p port] name ...
Extol:~ FBI$ whois 192.168.1.103
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/whois_tou.html
# Query terms are ambiguous. The query is assumed to be:
# "n 192.168.1.103"
# Use "?" to get help.
# The following results may also be obtained via:
# http://whois.arin.net/rest/nets;q=192.168.1.103?showDetails=true&showARIN=false& ext=netref2
NetRange: 192.168.0.0 - 192.168.255.255
CIDR: 192.168.0.0/16
OriginAS:
NetName: PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle: NET-192-168-0-0-1
Parent: NET-192-0-0-0-0
NetType: IANA Special Use
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
RegDate: 1994-03-15
Updated: 2013-08-30
Ref: http://whois.arin.net/rest/net/NET-192-168-0-0-1
OrgName: Internet Assigned Numbers Authority
RegDate:
Updated: 2012-08-31
Ref: http://whois.arin.net/rest/org/IANA
OrgTechHandle: IANA-IP-ARIN
OrgTechName: Internet Corporation for Assigned Names and Number
OrgTechPhone:
OrgTechEmail:
OrgTechRef: http://whois.arin.net/rest/poc/IANA-IP-ARIN
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: Internet Corporation for Assigned Names and Number
OrgAbusePhone
OrgAbuseEmail:
OrgAbuseRef: http://whois.arin.net/rest/poc/IANA-IP-ARIN
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/whois_tou.html
Extol:~ FBI$
Extol:~ FBI$ hosts
-bash: hosts: command not found
Extol:~ FBI$ who
FBI console Nov 7 02:14
FBI ttys000 Nov 7 04:33
Extol:~ FBI$ whois
usage: whois [-aAbdgiIlmQrR6] [-c country-code | -h hostname] [-p port] name ...
Extol:~ FBI$ whois 192.168.0.0 - 192.168.255.255
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/whois_tou.html
# Query terms are ambiguous. The query is assumed to be:
# "n 192.168.0.0"
# Use "?" to get help.
# The following results may also be obtained via:
# http://whois.arin.net/rest/nets;q=192.168.0.0?showDetails=true&showARIN=false&ex t=netref2
NetRange: 192.168.0.0 - 192.168.255.255
CIDR: 192.168.0.0/16
OriginAS:
NetName: PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle: NET-192-168-0-0-1
Parent: NET-192-0-0-0-0
NetType: IANA Special Use
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
RegDate: 1994-03-15
Updated: 2013-08-30
Ref: http://whois.arin.net/rest/net/NET-192-168-0-0-1
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
Updated: 2012-08-31
Ref: http://whois.arin.net/rest/org/IANA
OrgTechHandle: IANA-IP-ARIN
OrgTechName: Internet Corporation for Assigned Names and Number
OrgTechPhone:
OrgTechEmail
OrgTechRef: http://whois.arin.net/rest/poc/IANA-IP-ARIN
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: Internet Corporation for Assigned Names and Number
OrgAbusePhone:
OrgAbuseEmail:
OrgAbuseRef: http://whois.arin.net/rest/poc/IANA-IP-ARIN
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/whois_tou.html
Whois Server Version 2.0
Domain names in the .com and .net domains can now be registered
with many different competing registrars. Go to http://www.internic.net
for detailed information.
No match for "-".
>>> Last update of whois database: Thu, 07 Nov 2013 13:19:14 UTC <<<
NOTICE: The expiration date displayed in this record is the date the
registrar's sponsorship of the domain name registration in the registry is
currently set to expire. This date does not necessarily reflect the expiration
date of the domain name registrant's agreement with the sponsoring
registrar. Users may consult the sponsoring registrar's Whois database to
view the registrar's reported date of expiration for this registration.
TERMS OF USE: You are not authorized to access or query our Whois
database through the use of electronic processes that are high-volume and
automated except as reasonably necessary to register domain names or
modify existing registrations; the Data in VeriSign Global Registry
Services' ("VeriSign") Whois database is provided by VeriSign for
information purposes only, and to assist persons in obtaining information
about or related to a domain name registration record. VeriSign does not
guarantee its accuracy. By submitting a Whois query, you agree to abide
by the following terms of use: You agree that you may use this Data only
for lawful purposes and that under no circumstances will you use this Data
to: (1) allow, enable, or otherwise support the transmission of mass
unsolicited, commercial advertising or solicitations via e-mail, telephone,
or facsimile; or (2) enable high volume, automated, electronic processes
that apply to VeriSign (or its computer systems). The compilation,
repackaging, dissemination or other use of this Data is expressly
prohibited without the prior written consent of VeriSign. You agree not to
use electronic processes that are automated and high-volume to access or
query the Whois database except as reasonably necessary to register
domain names or modify existing registrations. VeriSign reserves the right
to restrict your access to the Whois database in its sole discretion to ensure
operational stability. VeriSign may restrict or terminate your access to the
Whois database for failure to abide by these terms of use. VeriSign
reserves the right to modify these terms at any time.
The Registry database contains ONLY .COM, .NET, .EDU domains and
Registrars.
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/whois_tou.html
# Query terms are ambiguous. The query is assumed to be:
# "n 192.168.255.255"
# Use "?" to get help.
# The following results may also be obtained via:
# http://whois.arin.net/rest/nets;q=192.168.255.255?showDetails=true&showARIN=fals e&ext=netref2
NetRange: 192.168.0.0 - 192.168.255.255
CIDR: 192.168.0.0/16
OriginAS:
NetName: PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle: NET-192-168-0-0-1
Parent: NET-192-0-0-0-0
NetType: IANA Special Use
Comment: These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment: These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment: These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment: http://datatracker.ietf.org/doc/rfc1918
RegDate: 1994-03-15
Updated: 2013-08-30
Ref: http://whois.arin.net/rest/net/NET-192-168-0-0-1
OrgName: Internet Assigned Numbers Authority
OrgId: IANA
RegDate:
Updated: 2012-08-31
Ref: http://whois.arin.net/rest/org/IANA
OrgTechHandle: IANA-IP-ARIN
OrgTechName: Internet Corporation for Assigned Names and Number
OrgTechPhone:
OrgTechEmail
OrgTechRef: http://whois.arin.net/rest/poc/IANA-IP-ARIN
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName: Internet Corporation for Assigned Names and Number
OrgAbusePhone:
OrgAbuseEmail:
OrgAbuseRef: http://whois.arin.net/rest/poc/IANA-IP-ARIN
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/whois_tou.html
<Personal Information Edited by Host>haha, so now i'm thinking. I'm learning the terminal as fast as i can but there are several lines of codes and commands in there that throws up red flags to me that i don't fully understand. It just looks fishy too me. It would be highly appreciated if someone could just check this out just to tell me that i don't need to worry about it. Or point me in the right direction. I just feel un easy about this. ha.
-
As i had said, I have an Apple Powerbook G4, and my monitor doesn't function. I have an external display Monitor, however it's stuck in extended screen mode. How do I get it to mirror or duplicate the display without use of the on-board? Is there a Fn key combo i'm missing or is the issue more serious then i realize? any and all help and hints would be greatly apprichiated, thanks in advance.
-Powerbook UserThe PowerBooks have an F-key that toggles mirrored and extended mode. My PB is loaned out right now but I think it was f7. The keycap has an icon on two overlapping rectangles, as I recall.
EDIT: Yes! Found a pdf of the PB manual it shows F7 is the toggle: -
When I open Iphoto, I see all my photos for a second and then they disappear and only a white dotted box appears. Then I click on it and for photos is a triangle with an exclamation point. It doesn't happen to all but quite a lot. how to I get them back
Have you recently deleted photos using the finder or run clean up software? Is so restore your backup
If not the backup your iPhoto Library and launch iPhoto while depressing the option and command keys. Rebuild your database
LN -
Since updating my iPad 2 to ios8, it safari has been slow and crashing and some of the apps acting wierd. The password app doesn't work at all so had to find another way of retrieving all my passwords. Very very dissapointing. It appears from these forums that a lot of people are having the same problems wit this latest update.
Hi erastyle,
Actually the Licensing information for the package is missing hence it is not launching any applications. You need to Reserialize the products using APTEE which you can find it on the Machine where you have created the package. If you dont have the access to that Machine then please download and install Creative Cloud Packager and it will download APTEE in the below mentioned location.
Windows:
C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\CCP\utilities
Once downloaded please follow this KB article to use the Tool.
http://helpx.adobe.com/creative-cloud/packager/provisioning-toolkit-enterprise.html
Please let us know if it helps.
Regards,
Abhijit -
Batch Monitor and Compressor do nothing when I submit...
Hey, guys,
I've re-install the whole OS and Final Cut Studio 2,
I use Compressor to encode my video clip,
after setup the format and the destination,
I click the "submit" Button, the batch job send to Batch Monitor,
but Compressor and Batch Monitor do nothing, the status bar didn't run.
Compressor's CPU usage is only about 0.x %.
Any body have the same problem?
How to solve this problem?hi Thomas!
I have norton 2005 and turned it off when I downloaded itunes and I get the same result. quicktime will open for me however.
NIS 2005 is the usual suspect with "symptomless launch suppression".
first try:
b noir, "itunes wont open" #6, 02:11pm Oct 3, 2005 CDT
... but if no joy with that, try:
Lorraine M, "NIS/i-tunes problem rectified" #2, 01:51am Oct 17, 2005 CDT
keep us posted.
love, b -
Tiger Installation Problems, Monitor Doesn't Have Picture
*Originally Posted in Tiger Support Discussions but no response.*
Hi every1,
I'm having problems as well trying to install Tiger on my power mac G3. I did the software exchange thing where I got CD's in place of the DVD. During installation,I restart the computer w/ the CD in drive, the computer starts but my monitor doesn't come on.
I've been looking through the discussions and no 1 is having the same problem i'm having. I downloaded the firmware but when I go 2 install it, A message says the firmware is the latest and doesn't need 2 be upgraded. Could it be a problem w/my Viewsonic LCD VE701b Monitor. Do I need 2 upgrade the video card or is there some other problem?
Power Mac G3 350mhz
1gb Ram (PNY Technologies)
Tempo ATA 133 PCI Card
Western Digital80gb hard drive, 4 partitions
currently using Mac OS 9.2.2 on main HD (8gb, 6.40gbs remaining)
Partition I want 2 install Tiger is 23.30gb
Any info will be helpful.
Thanks every1,
Andrea
Pt. 2
Hey every1,
I see U are stumped as well but anyway, I've been doing research and here's what I did.
1. I reset the PRAM, Nothing.
2. I reset the PMU, Still Nothing.
3. Emailed Tech Support at ViewSonic, (Awaiting a response).
Anybody have any other suggestions? Could it be corrupt CD?
Thanks,
AndreaTake a look at this thread for useful stuff about the Oxford chipset:
http://forums.macosxhints.com/archive/index.php/t-55470.html
Your computer cannot give you USB2, and USB1 is very very slow, useless for tasks like backing up that involve transfers of large chunks of data. With what is built in on a B&W, your only choice is FW.
The Oxford chipset is not the only one that works, but we know it does and those enclosures give you both stability and the ability to boot from the external drive.
p.s. I responded to this earlier this morning. Are posts getting lost? -
Samsung 27" monitor doesn't recognize my MacBook Pro
Hi All....I bought a Samsung 27" monitor ( S27B350H ) last night to use with my MacBook Pro laptop. I connected a HDMI cable from the monitor to the HDMI/DVI adapter then connected it to my MacBook Pro. Monitor doesn't recognize my MacBook. Why?
The CD that came with the Samsung can only be opened on a Windows machine. I don't know/do Windows.
There is a floating box on the monitor screen that switches between the word Analog and the word HDMI.
Do I need to do something in the System Preferences > Display section to get the Mac and Monitor to recognize each other?
Appreciate any help or ideas.
MSWThe Mac does not use Drivers for specific displays, so nothing on that CD will be useful anyway.
Instead, the Mac uses a highly parameterized display driver for each graphics card. When the display identifies itself by name and capabilities, Mac software automatically sets the parameters in the Driver for optimum performance with the stated display capabilities.
The problem comes when a display does not properly identify itself. No picture.
About this Mac > ( More Info ) Graphics & Displays ...
... will show you whether the display has reported it NAME and CAPABILITIES.
Maybe you are looking for
-
HI Gurus, My client is giving advance payment to Vendors.These are the two scenarios i) 10 to 75% advance payment for domestic Vendor ii) 50 to 100% advance payment to Import Vendor. My question is how I'll map these in SAP??? Give me the process fl
-
ARD 3 Announced - anyone find upgrade pricing
[ Edited by Apple Discussions Moderator; Please start a new topic about your technical issue. ] It appears there is no discount for current owners. Anyone see any different information?
-
This is a new problem for me so I hope I can get some answers. Thanks The problem now are not flash player. this Mac freezes and cannot be started again. Every time she tries to login,the screen starts to shiver,like when a wrong password is being us
-
I need basic ABAP OOPS material to learn OOPS concepts
Hi, I need ABAP Object oriented programming material. if any one having pls send it to my mail id [email protected] Thanks lokesh
-
Hello, I'm working on a website where objects on a desk zoom in and glow as the mouse rolls over and stays zoomed when its clicked on but I'm having troubles making it work consistently. I did it in Flash CS3 Action Script 3 but it isn't working on s