Batch no assignment as per material type
Hello All
I have requirement wherein the batch no is dertermined based upon the material type, I have used userexit EXIT_SAPLV01Z_001 for the same, initially it was finalised that batch no would be inernal, so I went for internal batch no assignment wherein I was using no. range object BATCH_MAT & I have defined sub-object for each material type & assigned no. range interval for each sub-object. It was working fine.
Now there is a requirement that for material type ROH(raw material) batch no has to be externally assigned. Kindly suggest how this requirement can be catered. Looking forward to your valuable inputs.
Regards,
J K Tharwani
Thanks Aneesh for your valuable inputs,
I am able to resolve my problem, what I have done let me explain you here, I have used same user exit which I have mentioned in this thread & I have defined a subobject ZROH under No Range object BATCH_MAT with no range interval as: AZZZZZZZZZ-ZZZZZZZZZZ(External).
Now for movement type 101 I have I have done little change in the customization of Batch Management. I have set indicator as "B"(Automatic/manual & check in user exit) in following node:
SPRO>Log Gen>Batch Mgmt>Creation of new batches>Define Batch creation for goods movements.
The above settings have resolved my problem.
Regards,
J K Tharwani
Similar Messages
-
Account assignment grp as per material type
Hello,
Is anyone of you aware of the settings where I can bring the default material account assignment group as per the Material type in material master.
I think it is not possible by configuration so kindly provide the user exits if any.
Thanks!!!
Regards
KaranHi
Have you thought of using Transaction variant through transaction code SHD0,
which is your materrial type is it SAP standard?
you create a transaction variant with your value of acc *** group and you can make it as default.
you can also use for e.g MMR1 for raw material , MMH1 for tranding and so on and change this , but this will only be in case of sap standard material type.
Regards
Jitesh -
A/c assignment category for material type
Hi Gurus,
1) Can I fix a/c assignmnet category for a material type? For example, I want a/c assignment category K for NLAG materials. If while creating PO for a NLAG material, somebody forgets to enter A/c assignment category, it should give an error msg "A/c assignment category is manadatory for the material type"?
2) If Gr-based IV is not checked in ERS PO, then while running MRRL statement, what type of error should come and what will be the remedy at that stage?
Thanks,
Kumar> 1) Can I fix a/c assignmnet category for a material type? For example, I want a/c assignment category K for NLAG materials. If while creating PO for a NLAG material, somebody forgets to enter A/c assignment category, it should give an error msg "A/c assignment category is manadatory for the material type"?
You Cannot Fix account assignment Category for a Material type.
> 2) If Gr-based IV is not checked in ERS PO, then while running MRRL statement, what type of error should come and what will be the remedy at that stage?
GR Based IV is an Optional. If you Activated this in Vendor MAster and PO then System wont allow to Post IR before GR. -
PO: Default Account assignment category per material?
Hello,
The requierement of my company is that some materials are purchased for stock and some others for Cost center. But at some point they want to move some of the materials of "cost center" into "stock". So materials will be "looking" the same in questions of views created, etc.
So it would be good if there is a way to default the account assignement category by material. Any idea? User-exit?...any possibility totally standard of doing this (withouth enhancemnet/user-exit)?
Release 4.6cHi,
It can be done by having two doc. types in the PO one for the stock and the other one for the consumption.No need for the two material types.
In doc type xy -account assignment is disabled, in the other doc type XZ the account assignment is enabled.
Also using the user exit ME_PROCESS_CUST, you can define the condition against the doc type.
Regards,
velu -
Purchase Requisition / Order: Account Assignment Category for material type
Hi,
When creating a PR or PO for one specific material I would like the system to propose a specific account assignment Category for this material. It shouldn't allow the user to change this account assignment category.
Is it possible? How should I proceed?
Thanks in advance.
Luis.I dont think there is any standard procedure for doing this.
My idea would be to use a user exit say EXIT_SAPLMEREQ_010 for PR and a similar exit for PO and code a Error message check for Material type and account assignment combination.
For ex : EXIT_SAPLMEREQ_010 is a exit which is called during check in a PR . SO when the user enters a combination of Material type and Acc assignment u can check for the requirements. -
Batch class assignment on a material
Dear all,
if a class is assigned on any material it shows its characteristics but when we save material.it did,t save the class.so guide me where is problem.Dear Ahmad,
have u assigned the charectristics to the class in CL01?
Go to CL24N, give ur class and class type click on display. If ur material has got assigned to the class it will display here. select the material and click on display. it will show all the charectristics and values assigned
sree -
Material type wise batch numbers
Hi,
I want to have different batch numbers ranges for different material type
Eg batch nos for Raw material should start with 10000000000
Batch nos for semi finish - 2000000000
batch nos of finish - 3000000000
Can anyone help me in this regards
Thanks in Advance
AbhiYou can use some of the standard User Exits or develop a custom user exit for this purpose.
You can use SAP enhancement SAPLV01Z for internal batch number
assignment. This enhancement contains two function module exits that you
can use to define number ranges or templates for batch numbers:
EXIT_SAPLV01Z_001. You use this exit to replace the number range
object and/or interval proposed by the system with your own number
range object and/or interval.
In addition, you can, for instance, stop the system from assigning
an internal number depending on the material or plant. You can also
use this exit to stop the dialog box from appearing.
EXIT_SAPLV01Z_002. Using this exit, you can either change the number
assigned by the system, or assign your own number.
There are many such user exits, please check and use the appropriate user exit.
Hope this helps you. -
Material type and account assignment group relation
Hi,
Getting an error while creating material master save. Account assignment Zx can't be with Material Type Zxxxx.
Please advise where is the link maintained between material account assignment group and material type.
My material is Z service material.
As I no for plant,industry, material type valuation class quanity update tick required but that is for stockable materials which is not the case above.
ThanksHI,
You can make the field Account Assignment Group of Material Master as inactive.
But it depends up on Plant, Industry Sector Type and Material Type.
You can do this in IMG --> Logistic General --> Material Master --> Field Selection
Or
use SHD0.. give T-code MM01. and you can deactivate the field.
Hope this helps you.
TC
BR
AKS -
How to create screen sequence and assign to material type
Hi,
How to create new screen sequecnce and how to assign it to material type, is there any link of Industry sector with this.
regards,
zafarhow to assign it to material type and also what is use of industry sector
Industry sector - it simply mean The industry sector groups companies according to activity, for example, plant engineering and construction, mechanical engineering, the chemical industry, and the pharmaceutical industry
Field references are defined in Customizing for the Material Master in the activity Maintain Field Selection for Data Screens.
for see field references run tcode OMs9.
Assign Field references to Material Type by Tcode OmT3E, You can see in OMS2 in General data See Field references and SRef: material type -
Dear All,
I have created a material with batch management & i have assigned a Class of type "023" in the classification view.
When i open the same material again there is no class assigned to the material.
this is happening to all materials.....
plzzz guide
CheersHi,
Refer below thread which is similar to your problem,
[Class not assgin|Re: Batch class assignment on a material]
Regards,
Dhaval -
Material type change for split valuation
We have to change to material type for materials having split valuation.
Suggest the requiredThe material type is stored in table MARA, however, MM17 can not change all fields that are contained in a table. MM17 is not a table modification tool, it just supports business process of mass changing some field contents. It is more like mass process MM02. But the fields that cannot even easily changed in MM02 like base unit of measure, batch managment flag are not supported within MM17. Material type cannot even be changed in MM02.
There are that many checks that need to be performed and cause a failure, that you cannot do such in a mass change transaction.
It is certainly possible to record MMAM to finally do this with batch input, CATT or LSWM for many materials. But first try it manually for 10-20 materials to make your experience.
By the way, dont forget the number range. If you change material type, then the material number will remain, which may screw up your number range logic (that is often defined after heavy and long discussions. If you have different number ranges per material type, then you should block the transaction MMAM for anybody) -
Price analysis by material type
Hi Gurus,
is there a tcode that would include a price analysis for materials over time. It should be able to be sorted by supplier, material type & material group. The main objective is to follow the price trend over time
Thanks
Anushahi,
For Stock as per material type :
Check MC.T, MC.U and MC.W....Material pricing groups...
Then also check MC$< : For Purchasing values
and MC$> : For purchasing quantities...
Above two are based on the material group...
Regards
Priyanka.P -
Hi,
While creating new material types what things should be taken in to consideration?
If i want to create it by using copy function which ref. material type we should select and why?.e.g. ZSCRAP- Scrap MaterialDear Ashutosh ,
Grouping of Material that have same basic properties can be assigned to one material type.
While creating new material types following points to be considered as material type controls following things,
1) Material is intended for certain purpose ( For ex consumption)
2) Whether material Number to be assigned internally or externally
3) Number range intervals
4) Screen sequence & which screens to be appeared
5)Which user data can be entered
6) Which procurement type ( Internal or external)
7) Inventory management i.e. value & qty update required..
You can also change material type for a material under following conditions.
1) Old & new material type must be assigned to same account category,
OR
2) No. open PO ,stocks or reservations
I hope this will clarify your doubts,If found useful please reward points
Vivek Maitra -
Material types in material master
Hi ,
What is the material type do we require in handling CS scenario?
Is it necessary to create BOM's for all the equipment?
Please respond
Thanks and Regards
Ashishhi
1) A grouping together of materials with the same basic attributes such as raw materials, semifinished products, or finished products.
All materials must be assigned to a material type which determines:
Whether the material is intended for a specific purpose such as a configurable material or process material
Whether the material number can be assigned internally or externally
The number range from which the material number is drawn
Which screens appear and in what sequence
Which user department data you may enter
What procurement type the material has; that is, whether it is manufactured in-house or procured externally, or both. -
Material Type not assosiated with Materials
Hi ,
I have a report in BW, where there are 4 Materials that are being displayed for which there are "no assosiated" Material Types and this information is coming from R/3 where these Materials have been assigned to a Material type .
These Materials and Material types are being entered through the respective variables when runing the report. When i click on the Materail variable to enter the values i dont see the 4 Materials( the one stated above) listed here. When i select material type as "not assigned" the report displays these 4 Materials in the report.
I also checked the master data in 0MATERIAL and i dont these 4 materials.
Please help me in solving this
Regards
ArjunI would like to clarify u one thing here.
1) Material Type is an Attribute of Material.
2) The values to these are entered through Variables while executing the report.
3) When I select the value for material type as "Not assigned" , only then these 4 material values get displayed.
4) From Point 3 above , it means that the data is loaded into BW.
5) I dont see these 4 Material values in all the following cases:
a) When i try to enter the Material values through the variable screen while running the report.
b) When i check the material values in the master data 0material.
Maybe you are looking for
-
Automate Open and Close of Inventory Periods
Hello, I have a request below. I want to Automate the Inventory Periods to open and close for all sites once purchasing period has been closed. sites with pending transactions will not be closed and an email will be sent as an alert. Thanks a lot and
-
How do I stop firefox from keeping my email and password online for facebook?
how do I stop firefox from keeping my email and password online for facebook? == This happened == Every time Firefox opened == in the past week
-
Error while trying to access dashboards from EPM
Hi We integrated OBIEE 10.1.3.4 with EPM 11.2 and when we are trying to access dashboards from EPM we are facing the following error : "Invalid or could not find module configuration." Please , help us in solving the above issue. Thanks.
-
hi i am using samsung galaxy y duos it just 3.15 inch screen.i cannot reduce the size i hv.reduced size to tiny in setting i dont work in website it in extra large only say me some help..
-
Syntax Error in Web UI component post upgrade
Hi Experts, We have a enhanced component in IC agent which is giving syntax error post upgrade from 7.0 to EHP2. It seems some attributes have been removed/altered in the new super class. In this case do we need to delete the component enhancement an