Batch number archiving- Inspection lot is causing the problem

Hai,
I am trying to archive a batch, but I do receive the below message:
u201CMaterial is used in Inspection Lotu201D. Message number W4123.
How do I archive an Inspection Lot?
Note We are not using Long term Inspection.. We are in ECC 6.
Anyone had this issue before?
Thank you in advance!
Sonali

Hi Senthil,
Thank you for your reply. Infact, I do not have any open inspection lots. UD was done against it. I could successfully archive the inspection lot. The status on the inspection lot is now ARCH. Now I ran MM_SPSTOCK to archive the associated batch number. But still I get message "Material is used in Inspection Lots".
any ideas?
I am actually going to post this under PLM forum.
Thank you!
Sonali

Similar Messages

  • Archiving Inspection lots

    Hi,
    i am usging Archiving Object QM_CONTROL.
    i want to Archive selected Inspection lots like 140000000001 to 140000001000.
    in my maintain variant
    i am giving input
    Plant : 1000
    Selection Profile : SAPQL01
    Inspection Lots  : 140000000001 to 140000001000
    its not reading any Inspection lots, Usage decision records and selected inspection lots.
    can any one give the process to Archive the Selected Inspection lots using Archiving Object QM_CONTROL.
    Regards,
    murali

    Hi Murali,
    Check note 1002056 whether it helps.
    Have you tried archiving with just the inspection lot range without the selection profile? also have you maintained proper residence times for inspection lots and performed the pre-processing run before running the archive run?
    Thanks,
    Naveen

  • Batch data transfer from batch classification to inspection lot.

    Hi Gurus,
    My client requirement is that the results he enters in batch classification should get transfer to inspection lot in QM.The results in batch classification will be maintained by prod. person.
    These results should be visible in QM lot and Q.M person should be able change these results and these changed results should get reflected in Batch classification.
    for eg.
    Production person will enter width in batch classification. for eg 1200mm.This value should be visible to QM person in QM lot and it should be modifiable and if modified by QM person(for eg 1300 mm) , the changed value should be updated in batch classification.
    Is this scenario possible in std. SAP and if possible pls. provide the information as early as possible.
    thanks in advance.

    My guess is your having a production person perform an in-process test themseleves or entering in a vendor provided value for the characteristic.
    Why not just set up a separate operation in the inspection plan for the production person?  Set up a workcenter for the operation and do security at that level so the production person can only record against his/her workcenter.
    Create a second operation for the lab with there own workcenter.  Make the characteristic required for the production operation and optional on the lab operation.
    Allow the lab access to both workcenters.
    The lab can now review any data enterred by production, and if necessary, record a new value in there own operation. 
    The UD copies the last recorded result to the batch, (std SAP).
    Craig

  • Archiving inspection lots problem

    Hi Gurus,
    I'm archiving inspection lots of goods receipt, when I executed the preparation program, inspection lots with the following status were not affected by the program, status: LTIN STIC SPCO CLQM STUP.
    I thought that may be the presence of long term inspection characteristic, is affecting the process, beside that there was status INSP which is inspection active, so I closed this characteristic, saved the UD and got this new
    status: UD   ICCO SPCO CLQM STUP. I waited till the residence period ends and executed the preparation program, but it is still not setting the status ARBL for the lots.
    Does any body have a solution ?
    Regards,
    Mahmoud

    That doesn't really surprise me.  Whoever designed the coding for SAP probably never considered that someone would want to archive just one inspection lot.  So they probably didn't test it for just one variable being passed.  More then likely somewhere in their code they wind up with a starting (or ending value) but a null value for the other side of the range.  It was probably never tested for hence not trapped for.
    Kind of a bug but then again, not really.
    Thanks for sharing the solution!!!!!
    Craig

  • Archiving Inspection Lots – Status ARBL

    Hi
    I’m busy setting ARBL status on Inspection lots using program RQRQAB00.
    These Inspection Lots are very old but all of them contain status UD or LTCA.
    The problem I’m facing is that Inspection Plan was deleted resulting in message “Inspection plan xxxxxxx does not exist” (Message no. QA318) when displaying these Inspection lots.
    Program RQRQAB00 does not issue a clear message for not activating status ARBL. Only reason I can think of is above message (QA318).
    What would be the easiest solution to activate ARBL?
    Best regards
    W

    Hi Werner,
    You can set ARBL by using SARA transaction and using object QM_CONTROL.
    Please create a  variant and schedule a job in background.
    You need to execute Pre processing job to make lots ready for archiving and put them in status blocked for archiving.
    Please check the pre-requisites for creating the inspection lot:-
    An inspection lot can only be archived if:
    ·        The inspection lot has been cancelled, or if a usage decision has been made.
    ·        If the last change to the usage decision was made before the retention duration.
    ·        All stock has been posted for a stock-relevant inspection lot.
    ·        If the inspection lot is not used in any of the following data records:
    ¡        Production order header
    ¡        Delivery note item
    ¡        Transfer requirement item without a “delivery completed” indicator.
    ¡        Quality level
    Use the following link for more information:
    http://help.sap.com/saphelp_nw04/helpdata/en/8d/3e606e462a11d189000000e8323d3a/content.htm
    BR
    Rahul

  • Table for Delivery number & Quality inspection lot number.

    Hi Gurus,
    In which table, Delivery Number & Quality inspection lot number  are related?
    Reg.
    Amol

    Hi,
    In LIPS
    If required modify layout and select Inspection lot option
    Kapil

  • SAP QM Default Inspection Plan for all Inspection Lots created in the Plant

    Scenario: We have a Proto type plant in which Daily 15 to 20 materials are created every day. We have only one inspection plan for all the materials.
    Problem: We don't want to do material assignment in the Inspection Plant header every time a new material is created
    Requirement: Is there any way to default the inspection plan for all the inspection lots created in the Plant by Standard Configuration or User Exit.
    Your answers will be much appreciated and rewarded.
    Thanks in advance,
    Thiyagu

    Hi,
    In our case Creation of Inspection lots are controlled by QM View of Material Master. Our problem is to find alternative for assignment of New Materials in the Plan header in Tcode QP02, as we have only ONE INSPECTION PLAN. So our expection is all QM Inspection Lot created in the Plant should always get assigned to the SINGLE INSPECTION PLAN, with out doing any assignment of material in the Plan.
    Thanks,
    Thiyagu.

  • When Firefox freezes, how can I shut it down, and re-start it without it automatically going to the site which caused the problem in the first place ?

    I have Firefox set so that when I start up, I have it set so that it automatically goes to my home page. However when it freezes, which it does on a daily basis, and I have to shut it down and re-start, it automatically goes to the site which caused the problem in the first place.
    If I was a hacker, I would probably find it quite fun to design a virus to reintroduce bugs after they had been exterminated - except that Firefox seem to have got there first.

    Here's how:
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the search box above the list, type or paste '''sess''' and pause while the list is filtered
    (3) Double-click the '''browser.sessionstore.max_resumed_crashes''' preference and enter 0 (that's a zero) and click OK.
    When Firefox resumes after a crash, instead of resuming automatically, it will display a list of your previous windows and tabs and you can deselect problem pages.
    (This assumes it wasn't a private browsing session.)

  • HT202020 Using a SDHC card adapter I can import directly on my iPad2 videos (.mov) taken with a Panasonic DMC-ZS3. The same video files (same file format) imported in Aperture 3.3 cannot be synchronized with iPad. Is Aperture causing the problem?

    Using a SDHC card adapter I can import directly on my iPad2 videos (.mov) taken with a Panasonic DMC-ZS3. The same video files (same file format) imported in Aperture 3.3 cannot be synchronized with iPad. Is Aperture causing the problem?

    Oh, baby! This bad boy flies!! Here's what to expect:
    I had 40,000 images in Aperture 3 and it was dog slow at everything. I installed 3.1 update today. It took 5 minutes to update the database and then behaved marginally better than before at ASIC library navigation. I was disappointed.
    Then I QUIT the app. It took a couple of hours to "update files for sharing" with a counter that went to 110,000 images. So it must have updated every thumbnail and variation of preview. Turned it back on , and BAM. Came up fully in seconds. Paused for 10 seconds ten everything was lickrty split. For the first time ever, I can use the Projects view with all 791 projects and scroll quickly. I even put it in photos modevand whipped thru all 49,000 images!
    Haven't done anybprocessing yet, but i'm liking it!!
    Jim

  • The new firefox twitter app is great - except it disappears every time I shut down the computer and I have to remove and then reinstall it every day!?? I am working on an iMac - if that is causing the problem ...? Thanks.

    The new firefox twitter app (mini tab on left of page) is great - except it disappears every time I shut down the computer and I have to remove and then reinstall it every day!?? It won't appear on the page until I do. I am working on an iMac - if that is causing the problem ...? Thanks.

    Eustace, thank you so much for writing back.  I will try what you suggested!!
    thx for your reply - apparently when I went to the Apple store a long time ago, they restore maybe photos and itunes etc from my external hard drive (passport).  I guess at that time they reinstalled an earlier operating system than my macbook came with and that somehow corrupted FileVault.  apparently there was no sparse bundle (whatever that is) for my old admin account and they said that ever since the install of the older OS that it was actually NEVER backing up anything in my admin account.
    Then, I bought Time Capsule and starting backing up to that instead.  I started having problems with it being slow etc and then StartUp Disk full errors and didn't know what to do, so I "Restored" from Time Capsule and that's when I lost everything in my Admin account and was locked out when I tried to log in - it said File Vault error ..."
    anyway - that's THAT sad story.  I was told to create a new admin account and I've basically been trying to start over - even though I have a partial save of my computer in Crash Plan and I DO see a sparse bundle listed in there, but I just don't know enough about computers to know if it's something I can get back or if I am just totally doomed. 
    I'm afraid to reinstall anything because if there is even a remote shot that the other files are still floating around in my computer, I feel like that chance will be shot forever.  I need to hire McGee from NCIS, I just KNOW he could get those files back for me!!!

  • Suddenly all of my Office-programs have stopped working and will not launch on my MacBook. Could anyone give an amateur from Norway a hint of what may cause the problem? And I can not find the installation-disc for Office...Super! :)

    Suddenly all of my Office-programs have stopped working and will not launch on my MacBook. They were all already installed when I bought the computer. Could anyone give an amateur from Norway a hint of what may cause the problem? (And I can not find the installation-disc for the Office Programs...Super!)

    Have you contacted Microsoft support - http://www.microsoft.com/mac/support ? 

  • Don't know if this went through the first time. Cannon printer would not print black. bought a new Epson-800. Same problem. Can it be something in my Mac causing the problem. It's only the black that is not working.

    Don't know if this went through the first time. Cannon printer would not print black. bought a new Epson-800. Same problem. Can it be something in my Mac causing the problem. It's only the black that is not working.

    Bill ...
    Believe it or not, might be a font issue > Computer won't print black text in...: Apple Support Communities

  • 1. The procedure called by CUSTOM.pll causes the problem when we use f60gen

    When CUSTOM.pll contains a call to a package that in turn calls a remote package, the CUSTOM.pll compile hangs forever.
    1. The procedure called by CUSTOM.pll causes the problem when we use f60gen. Though same procedure compiles successfully using "alter procedure compile" command.
    2. We have observed the problem happens due to synonym present on the remote database(db link).
    It doesn’t work if you are calling SYNONYM on remote database. It works, for calls to tables or procedures or packages in remote database if that object is OWNED DIRECTLY by the account to which dblink is connecting to.
    select object_name, object_type from user_objects@NH_SCM_ICE.DB.ATT.COM ;
    OBJECT_NAME OBJECT_TYPE
    FA_LOCATIONS SYNONYM
    FND_FLEX_VALUES SYNONYM

    The database link is created under the APPS user in the local database but connects to a different user (SWCS_ICE_SUPCHAIN) in the remote database.
    The user in the remote database does not own any objects. It only has synonyms to objects owned by apps and others.
    Incidentally, the hang also happens when trying to describe the remote package from the application tier (8.0.6.3 sqlplus) but the describe works fine from the DB tier (10gR2 sqlplus).

  • Can't pull a clip onto the end of my timeline ... (1st time on iMovie) One of the clips has an orange highlight on it. Is this causing the problem?

    Can't pull a clip onto the end of my timeline ... (1st time on iMovie) One of the clips has an orange highlight on it. Is this causing the problem?

    Ahhh, now I see the problem, Grasshopper.  Problem is, we are all Grasshoppers, here.
    Yes, that little piece of info is critical. I'd say the biggest difficulty with FCPX is the whole new language.
    If I read you correctly, your Audio is in the Main Storyline (Track 1 in plain old Editorese). This makes anything else you add (above or below) a "connected clip", which we can no longer think of as "Track 2" because Jobs sez so. So, yes, you cannot just add a transition to either end of a connected clip.
    No argument with Tracy's solution, because I haven't seen any other general solution presented for any attempt to treat connected clips as the main storyline.  And, of course, when they were "track 1" and "track 2", you could.
    An alternative solution, however, is to highlight the connected clip and press Ctrl-V to bring up the Video Animation Editor.  Click the "reveal button" for Compositing: Opacity (bottom, right).  Once open, there is a "fade handle" to the right top.  Drag it left for however much fade you wish.  (there is one on the left as well, but you were only talking about a fade-out.)
    A second alternative, perhaps for future projects where everything keys on audio, may be to create a Gap clip (used to be called slug) in the primary storyline before ever dropping in the audio.  Then you can add video to the main story line and modify it without having to go thru hoops to do the simplest thing.

  • I have been using iCloud since it came out to coordinate my schedules from my phone, ipad and Mac laptop.  Last week they stopped synching...I can't upgrade b/c of memory. Could this cause the problem?

    I have been using iCloud since it came out to coordinate my schedules from my phone, ipad and Mac laptop.  Last week they stopped synching...I can't upgrade past OS 5.1.1. b/c of memory (1st generation iPad and iPhone 4s). Could this cause the problem after the release of the new OS?

    Welcome to the Apple Community.
    First check that all your settings are correct, that calendar syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
    Make sure the calendars you are using are in your 'iCloud' account and not an 'On My Mac', 'On My Phone' or other non iCloud account (you can do this by clicking/tapping the calendar button in the top left corner of the application ), non iCloud calendars will not sync.
    If you are sure that everything is set up correctly and your calendars are in the iCloud account, you might try unchecking calendar syncing in the iCloud settings, restarting your device and then re-enabling calendar syncing settings.

Maybe you are looking for