Batch number change after Process order release

Hi all,
I would like to know if it is possible to change the batch number after that the process order has been released.
Actually, the field is grey and not editable anymore.
Is it customizing?
Thanks in advance,
Giovanni

hi
if the Batch numbers are generated while releasing the Process order. you cannot change the Batch number. (it will have inconsistency of data)

Similar Messages

  • Material number changed after purchase order released

    Hi Experts
    Please we are experiencing this behavior in our system.
    A purchase order for a specific material number is created and released, after this we can change the material number and its plant ¿is this a standard and right be way of SAP?
    Thank for your help
    JM

    Hi,
    You can design your process as the business demand.You can set Release Indicator 1 in designing Release procedure for  PO , where release Indicator 1 is used for purchasing document cannot be changed/Change not allowed after release.
    Regards,
    Biju K

  • Batch number determination from process order

    Dear Gurus,
    I need when I'm receiving on a process order, the batch number is copied from the batch of the process order.
    Regards,
    MaX

    Yes, it is possible depending on the setting of your order type (IMG -> Production Planning for Process Industries -> Process order -> Master data -> Order -> Define Order Type-Dependent Parameters)
    If here, in the combination plant - order type, there is the setting in Process data documentation area on "Batch record required", then batch can not be changed in process order after the release.
    If the setting is in one of the other two options, then you can change the batch after release.
    Bye

  • Why the missing parts list changed after Pro.order released

    I open a pro.order before released ,then I do the availability check get a missing parts list, this list including less parts than the missing parts after pro.order released ,why does it caused?which configuration caused?
    Thanks,
    Helai

    Hi Lai,
    You can do Material Availability check at the two stage of Production / Process Orders.
    - First is to control (Check Missing Part) at the time of Order Creation.
      T.code is OPJK - Select order type and Business Transaction -1 at the time of Order Creation
    - Second is to control(Check Missing Part) at the of Order Relase.
      T.code is OPJK - Select order type and Business Transaction - 2 at the time of Order release.
    So it may possible that you have assign different checking group or checks to the above both stages , that's why you got different result regarding missing parts during above both stages.
    Regards,
    Dhaval

  • Regarding Batch No Assignment During Process Order Release.

    hi,
    i have one secenario.
    Suppose I have Process Order For material. PH-5000.
    It have 3 material as ingradients.
    ph-1000 - roh
    ph-2000 - roh
    ph-3000 - Semifinished.
    what i want when Process order for Mateiral ph-5000 get released.
    Batch No of PH-3000(Semifinsehd) get copied to PH-5000 batch no.
    Its Urgent
    Is any Enhancement is theri , pls let me know,
    Thanks,
    you can mail me.
    [email protected]

    Dear Mohit,
    If you want to go for external batch numbering during order release then
    - Set no automatic Batch creation in order in T.Code CORY.
    This setting only restrict the automatic Batch Creation in order only.But to fulfill second your requirement of restricting order release or save without assigning external batch no you have to either go for,
    - User exit.Below are the user exits which are trigger at the time of order saving
    PPCO0006 to predefine entries for order header fields when
    an order
    PPCO0001 to provide information at the time of saving (for
    production orders and process orders)
    PPCO0007 to check or change header data when saving
    or
    - Create screen variant using T.code SHD0 and make Batch Field compulsory.
    Regards,
    Dhaval

  • Batch Number assigned to Process Order

    Hi Experts,
    Which table should I use if I want to get the Batch number assigned in a process order?
    Thanks,
    Kumar

    Hi,
    If u want to get the batch number of Process Order FG then u can get it from AFPO.If u want item level then get it from MSEG table.
    Regards
    R.Brahmankar

  • Batch number coming automatically at the time of Process order release

    Hi All,
    I want the system generated batch number for header material to come automatically at the time of process order release.
    At present ,the batch number is entered manualy dering process order creation.
    Can anyone pls guide abt the settings required for the same

    Dear,
    Define the  production scheduling profile CORY then
    Auto Batch Creation = 2 On release.
    Then assign this to your FG or SFG materials in work scheduling view in material msater MM02. Then create new order and check.
    Now for automatic generation i have to set internal number asignment for batches.
    Batch will create for movement type say 101 SPROLogistics - GeneralBatch mangment--Creation of New Batches --Define Batch Creation for Goods Movements. so it will have same logic in MM for 101 GR against PO will be internal number range but no effect in SD.
    Regards,
    R.Brahmankar
    Edited by: R Brahmankar on Mar 12, 2010 12:40 PM

  • FEFO logic in batch determination for process order release

    Batch determination for a particular material in a process order was following FIFO logic . We needed to change it to FEFO hence we made the necessory changes in COB1 how ever the process order relase is still taking the batch whihs is not the first expiry batch
    Kindly help in batch determination with FEFO for process order release.

    Rk
    The blw explation for inventory side, i don't have idea for prod order side
    If Batch Management is active for the materials then use following process;
    First create characteristic in CT04 for Batch Creation Date, under "Addnl data", enter Table Name MCH1 or MCHA (As per Batch Class 022 or 023) and Field ERSDA and save it.
    Assign this characteristics in CL02 in your Batch Class.
    CU70 - Create a Sort Rule and specify the Characteristic of Batch Creation Date and activate "Ascending" indicator.
    Now assign the Sort Rule in MBC1 and keep Selection criteria as "O" for the Strategy type.
    Now do batch determination in MIGO.

  • User Exit at process order release or save

    Dear experts,
    Can any one help me which user exit will be useful at the time of process order release or save (t code COR1/COR2).
    My requirement is to stop the process order release if there is any maintenance order is already released on that date.
    Process order should not get released in between the start and finish date of PM order for the same equipment.
    I could acheive this for PM side by using a user exit IWO10002, here if any process order is released for an equipment PM order cannot be released for the same equipment in between start n finish date of the process order.
    Please help me out in finding the user exit for process order release / save.
    Thanks in advence,
    Regards,
    Praveen.

    Hi,
    The following enhancements are available for process order management:
    For order maintenance:
    o   PPCO0006 to predefine entries for order header fields when creating
        an order
    o   PPCO0001 to provide information at the time of saving (for
        production orders and process orders)
    o   PPCO0007 to check or change header data when saving
    o   PPCO0002 to add additional checks that are to take place when
        setting the deletion flag or deletion indicator
    o   PPCO0003 to prevent changes in sales order items that would cause
        changes in the process order for static assembly processing
    o   STATTEXT to format the status line
    o   PPCO0008 to check components that have been changed or added
    o   PPCO0005 to change the storage location and the 'backflush'
        indicator in the reservation
    o   PPCO0013 to change the priority of the selection criteria for batch
        determination in production orders or process orders
    o   PPCO0014 to restrict the selection of process orders that are
        offered when creating external relationships
    o   PPCO0020 to display additional information for another tab page in
        the process order header
    Regards,
    Dhaval

  • Suggest the user exit when process order released then save

    Need to update batch value from component's batch field to FG batch field. Need at the time of process order released and saved. Can you please tell me which user exit to use?

    Hi,
    The following enhancements are available for process order management:
    For order maintenance:
    o   PPCO0006 to predefine entries for order header fields when creating
        an order
    o   PPCO0001 to provide information at the time of saving (for
        production orders and process orders)
    o   PPCO0007 to check or change header data when saving
    o   PPCO0002 to add additional checks that are to take place when
        setting the deletion flag or deletion indicator
    o   PPCO0003 to prevent changes in sales order items that would cause
        changes in the process order for static assembly processing
    o   STATTEXT to format the status line
    o   PPCO0008 to check components that have been changed or added
    o   PPCO0005 to change the storage location and the 'backflush'
        indicator in the reservation
    o   PPCO0013 to change the priority of the selection criteria for batch
        determination in production orders or process orders
    o   PPCO0014 to restrict the selection of process orders that are
        offered when creating external relationships
    o   PPCO0020 to display additional information for another tab page in
        the process order header
    Regards,
    Dhaval

  • Batch not updated in process order

    hi all,
                When i am doing batch determination and goods issue through coik pick list batch not update in process order. presently we are not doing batch determination in process order.after goods issue component batch fields are grey out in the process order

    HY,
    Batch field are filled only if you do Batch determiantion of components whether it is by auto or manual.And it is logical also becasue if you split the material qty. in more than one batches during goods issue( whether it is in COIK or in COR6N)then think what should be the case in Component screen in process order?
    As soon as you complete the Goods Issue This field becomes gray but the filled of Quanity withdrawn is update with qty you have withdraw.
    Regards
    Dhaval

  • Log creation for changes in Process Order

    Hi,
    We need a feature in which we need a log to created for any changes to process order. For example if qty of a component is changed, the log will records the old qty, time of change & who changed it. Similarly it should record other things like inserting/deletion of a component, insertion of a new resource etc.
    Note that the log of status change in process order does not serve the purpose.
    Please provide some solution to this.
    regards,
    Mohit

    Hello Mohit,
    You need to implement Order change management  (OCM).  Explore detail functionality and capabilities of it in help.sap portal . Also there are tons of material on it in SDN forum . Refer SAP note 390635 for more information
    If you have any query on any particular area on it then let us know .
    I hope the information helps
    Cheers
    Kaushik

  • Material list layout need to be changed in Process Order

    Hi All,
           I am using 4.6 B , here I want to change the process order material list layout .In the later version (4.7 & ECC 5.0) I could able to find the option 'Change Layout'  in the process order itself. Incase of 4.6B no such like option found .So could anyone know me where shoud I can change the layout .
       Particulary I need to change the sequence of columns in layout.
    Thanks in advance.
    Anil

    Hi Amit,
         I have tried the option already , but could not able to alter the sequence of the fields apart from the hiding of fields .I required to alter into customer defined sequence of fields in the layout , so would appreciate your suggestions on this .
    Thanks
    Anil

  • External Number gneration for process order creation

    Hi,
       I need to generate external number range for process order creation and at the time of goods receipt.
       How can I do this in the include ZXVBZU02.
    Regards
    SAi

    You might want to try search first:
    http://www.google.com/search?hl=en&source=hp&q=externalnumberrangeforprocessordersite%3Asap.com

  • Block Operation Number Change in Production order

    hello,
    How can i block the operation number change in production order if the operation status is CNF...?
    ie either disable the operation number cell or disable the entire row in the production order.
    rgrds
    Krishna.

    hi prashob
    i can't disable the column, as user need to insert operations in between
    AP, 
    I will check for this...
    regards
    Krishna

Maybe you are looking for