Batch number is blank and not editable during packing into Handling Unit

Hi, we have an issue that the batch number (VEPO-CHARG) for delivery line item is not showing up and not editable during packing into Handling Unit through shipment transaction VT01N.
When we have a batch split for one delivery line item, we want to be able to choose which batch to be packed into each handling unit.
Does anybody know any userexit to populate that field or at least make it editable? Is there something in the configuration that make it not show up?
We tried all the SAP suggested userexit for VT01N but nothing seem to control the handling unit packing screen.
Any hint is appreciated and point will be rewarded.
Minami

you should take the ovn on the effective date. A max will not always work.
Is the max also not hiding a no data found?

Similar Messages

How to modified automatic batch number with plant and current year details

hi all,
i want tomodify automatic batch number with plant and current year details. if any one understand plz explain.
thanks,
radhakrishna.

Hi,
I am not clear what is u r requirement exactly?
I mean you don't want automatic batch no or modify the batch no. with plant means and Current year details means. Can give details more
Regards
Ganesh

Has anyone's screen go blank and not boot up after installing the new yosemite OS

has anyone's screen go blank and not boot up after installing the new yosemite OS

Hi Mofimac,
Thanks for visiting Apple Support Communities.
If your Mac is only starting up to a blank gray or white screen after updating OS X, you can find some useful troubleshooting steps in this article:
Mac OS X: Gray screen appears during startup
I recommend going through these first three sections first:
Disconnect, test peripheral devices and network cables
Perform a Safe Boot
Reset the NVRAM / PRAM
Best Regards,
Jeremy

HT2801 My drive reads discs as blank and not reading music cds at all.

My drive is reading start up discs as blank and not reading music cds at all( they just spin in there until I eject them). They're clean, scratch free and ejecting with no problems. I replaced my hard drive three weeks back and need to replace programs and info.

Try
Intel-based Macs: Resetting the System Management Controller (SMC)
<http://support.apple.com/kb/HT3964>

My iphone went blank and when I plugged it into outlet the screen shows the itunes logo and a picture of what looks like the charger. I tried to reset it and it does not respond. Help!

My iphone went blank and when I plugged it into outlet the screen shows the itunes logo and a picture of what looks like the charger. I tried to reset it and it does not respond. Can anyone help?

That screen means it has gone into recovery mode. You need to connect to a computer running iTunes by following the instructions in http://support.apple.com/kb/HT1808 for the procedure of recovery mode connection.

How to disable iMac screen and not to put it into sleep?!!!

I would like to play a movie on my iMac but to watch it on my LCD TV. How to disable iMac screen and not to put it into sleep. PLS have in mind that ctrl+shift+ eject does not work, it makes my iMac screen go black as well as the tv screen.So far, i have red many articles concerning this subject, but no one seems to have the right answer. I simply can´t believe that apple did not think of it, as it is nothing new ....
Thanks

My brother has eight cats, so your not along. Fortunetly his go outside.
I have been talking to the people over at macforums and they had some good thoughts. One guy suggested going analog and soldering in a rocker switch on the cable connecting a hub to the computer, turn off switch turns off keyboard and mouse.
I was prepared to try that but a great idea came along. Arch, you might be interested in this too. Buy a cheap (found one locally for $20) usb kvm switch that takes one usb keyboard and mouse and connects it to two pcs/macs and only connect one of the outs to my system. There is a button to switch between the two, so when I want to disable the keyboard and mouse, I just switch it to pc2, which is not connected to anything.
Cheap and easy solution. I wish I could of figured out how to do this with software, since there would be no money if it was freeware, but I guess you cant win them all.
Thanks everyone for chiming in!

Batch number format setup and auto batch creation during first GR

Dear all,
This is a batch question.
I know that both the master batch and the stock data for the batch are created automatically during the first goods receipt. Thus, I do not need to create this data manually.
My question are following:
1 - what is the machnism that trigger this auto-batch creation in the system during the first goods receipt? is it from some kind of configuration?
2 - If I want my batch number to appear in certain format, for example, first four digit is customer code, middle two code is country code (i.e. US, UK), and the remaining as goods receipt date. How do I setup this in the SAP system.
3 - If batch classification is active, one can assign characteristic values to the batch when entering the goods receipt. HOwever, normally when I perform a goods receipt in MIGO, after putting in the production date and the batch number, I will hits the checkbox and if no problem, I will post the 101 document. WHERE in the MIGO screen I can assign the characteristic value to the batch?
Thanks.

My question are following:
1 - what is the machnism that trigger this auto-batch creation in the system during the first goods receipt? is it from some kind of configuration?
==> Yes - See IMG activity 'Define batch creation for Goods Movements'
2 - If I want my batch number to appear in certain format, for example, first four digit is customer code, middle two code is country code (i.e. US, UK), and the remaining as goods receipt date. How do I setup this in the SAP system.
==> See exit EXIT_SAPLV01Z_003
3 - If batch classification is active, one can assign characteristic values to the batch when entering the goods receipt. HOwever, normally when I perform a goods receipt in MIGO, after putting in the production date and the batch number, I will hits the checkbox and if no problem, I will post the 101 document. WHERE in the MIGO screen I can assign the characteristic value to the batch?
[[> See IMG activity 'Activate Batch Classification for Goods Movements in IM"

Copying of Batch number in GI and then to GR - MM

Dear SAP Gurus,
I have created a Stock transport order (STO). Against that STO I have created the delivery. In the delivery I enter the Batch Number/Characteristics(MM). When I do the Goods Issue against that delivery the Batch number is not being copied. Against that Goods |ssue, when I do the Goods Receipt I have to enter the batch number/characteristics manually.
We have a two step Storage Location to Storage Location transfer. When we do the Goods Issue the stock goes to Goods in Transit and then the GR is done against that GI.
Please let me know how to copy the batch number/characteristics automatically. Please also mention the name of the user exit if this can be handled through a user exit.
Thanks and Regards
Shehryar Zuberi

Hi Shehryar
When you post the receipt (via MIGO or MB01) if you change the way you receive (e.g with reference to the outbound delivery) then all of the batch details and characteristics will be copied into the receipt
The batch is only copied when you receive with reference to the outbound delivery from the STO
Good luck
Steve

Release Date in Get Info always 6/5/1905 and not editable?

In Get Info, in the new iTunes, the Release Date is not editable. However, when downloading books and importing into iTunes, the Release date is always 6/5/1905. Now I don't think either music or books or anything likely to be downloaded was released in 1905, so, why is the field not editable?
Thank you,
Laura

Actually I never noticed a field called "Release Date" in Get Info of previous versions, only Year. And there is no Release Date field shown in any of my music Get Info. If I try to access Get Info for albums, it asks me if I want to "edit information for multiple items." If I click on Edit Items, there is still no Release Date field - just Year.
However, not one of the Release Dates are correct in any of the books, i.e. those imported into iTunes both before and after the latest "upgrade." AND the Release Date column is blank for them all. So what is it for, anyway?
It is a pity that, if it isn't editable, it should be able to be removed or added depending on the need.
Just found out another weirdness. In the Audiobook List Genre is no longer there. It is in the Playlists, thank heaven, but not in the master list where it really should be. It IS in Music, but not in books. How weird. I hope that is an oversight and will be fixed.
Thank you for your response.

Why is my mac book blank and not loading when I turn it on?

Why is my mac a blank screen when I turn it on and not loading?

Jasmin325<
Also please include your model, year, which OSX you are using, this will help anyone reading this to offer advice.
https://discussions.apple.com/docs/DOC-5431
A couple of shots in the dark here.
Try this, start in safe mode and see if it will go. Power it off, power it on holding the shift key, continue to hold the key till you see a progress BAR, then release and see if it will finish booting. If it does login see if thigs work, then log out and try booting normally. (NOTE that this takes considerably longer,be patient)
Another thing you can try is powering it up holding the OPTION key and see if the start up manager brings your HD up on the screen, if it does click on that and see.

How can I prevent my previous login strings from showing when I starting typing. I'd rather the field stay blank and not start to fill in, based on previous entries.

I don't know what setting to change so that when I start typing my login (to an email account, etc), the previous entries do not show up. I want the field to start out and stay blank, and have me type the whoe string
== This happened ==
Every time Firefox opened
== has been, all along

Clear the Search and Form History, under Tools > Clear Recent History.
And, then turn off the Search and Form History so it won't save it anymore, in Tools > Options >> Privacy - select ''Use custom settings for history'', then un-select Search and Form History

How to get calendars and notes from my iPhone into iCloud?

Hello all,
yesterday I got a new MacBook Pro Retina at work. This upgrade me to OSX 10.8 from 10.6, so I planned to use iCloud to sync my iPhone 5 and my Mac this way. So far I synced the devices manually via iTunes.
However, so far I only got Contacts to sync with iCloud correctly. Calendars and notes just don't do it, although their sync is turned on on the iPhone as well as on the Mac.
All my attempts to get it to work obviously destroyed the possibility to sync calendars via iTunes - after a sync there is just nothing showing up in Calendar. This is really bad as now I can only access my calendars via the iPhone.
Since my iPhone now contains the most recent calendar and note data the question is even more simple: how can I get these data from my iPhone into iClous so they will also sync with my Mac (and from then on on all devices)?
It doesn't work by just turning calendar sync on on the iPhone. When I do this, I now see two calendar groups "From my Mac" and "From iCloud". Great, but what I want is to replace "From iCloud" with "From my Mac".
I have already reset iCloud, but this didn't help either.
I'm close to desperation, so any hints are very much appreciated!
Thanks and best wishes,
Thomas.

Solved - it was a general sync problem. Today I was not even able anymore to sync my calendars via iTunes. Problem and solution see https://discussions.apple.com/thread/5505069.
Best,
Thomas.

How can I get to read a large file and not break it up into bits

Hi,
How do I read a large file and not get the file cut into bits so each has its own beginning and ending.
like
1.aaa
2.aaa
3.aaa
4....
10.bbb
11.bbb
12.bbb
13.bbb
if the file was read on the line 11 and I wanted to read at 3 and then read again at 10.
how do I specify the byte in the file of the large file since the read function has a read(byteb[],index,bytes to read);
And it will only index in the array of bytes itself.
Thanks
San Htat

tjacobs01 wrote:
Peter__Lawrey wrote:
Try RandomAccessFile. Not only do I hate RandomAccessFiles because of their inefficiency and limited use in today's computing world, The one dominated by small devices with SSD? Or the one dominated by large database servers and b-trees?
I would also like to hate on the name 'RandomAccessFile' almost always, there's nothing 'random' about the access. I tend to think of the tens of thousands of databases users were found to have created in local drives in one previous employer's audit. Where's the company's mission-critical software? It's in some random Access file.
Couldn't someone have come up with a better name, like NonlinearAccessFile? I guess the same goes for RAM to...Non-linear would imply access times other than O(N), but typically not constant, whereas RAM is nominally O(1), except it is highly optimised for consecutive access, as are spinning disk files, except RAM is fast in either direction.
[one of these things is not like the other|http://www.tbray.org/ongoing/When/200x/2008/11/20/2008-Disk-Performance#p-11] silicon disks are much better at random access than rust disks and [Machine architecture|http://video.google.com/videoplay?docid=-4714369049736584770] at about 1:40 - RAM is much worse at random access than sequential.

Ipad 2 blank and not responding to reset

I have been using my iPad 2 happily for 6 months. After charging overnight on A/C power, this morning I found it had a blank screen. On clicking the home button, the screen lit up slightly but a display could not be seen. I tried a restart (home and power button for >10sec) but didn't even observe the apple logo. On connecting to iTunes, I managed to restore the iPad but the screen only flickered between a blue screen with a circular fanning icon (no apple logo) and a blank screen. It never returned to its former glory. I have sinced tried a restore 3 times both with and without restoring a back-up and have had no change in the visual display on the iPad. Any suggestions or is it off to the Apple store?

You should call apple care and go over your problem with them. sounds like your ipad is still under warranty so there is a good chance they will repair device free of charge.

Macbook just went blank and not turning on.

I have a 2008 Macbook A1278. Last night I was browsing and suddenly my Macbook's screen went blank. My battery is not working so I tried turning off the Mac by holding the power button. Nothing seems to work and it doesn't turn on. I tried resetting the SMC by the steps provided on the support website but even that isn't working. Now when I turn on the Macbook I can feel it working but the display doesn't come and the white light doesn't come either at all. I tried going through every possible solution available online but nothing seems to work. Help is required. This Macbook of mine is very essential as I work on it.

Nothing seems to work and it doesn't turn on.
Might be the adapter > Apple Portables: Troubleshooting MagSafe adapters
If it's not the adapter, might be something you haven't tried here > Troubleshooting: My computer won't turn on

Batch number is blank and not editable during packing into Handling Unit

Similar Messages

Maybe you are looking for