Batch Number Not copied over from Production order to Confirmation

Dear Experts,
In the production order, I specify the batch # for the components. But when I do the confirmation, the batch number for the components is not getting copied over.
Can anyone suggest what has to be done.
Regards
Tom

Dario, I have not saved my confirmation. But when I execute CO11N and go to "Goods Movement" tab, I expect the Batch to be copied from the production order for the components. But the batch field is Blank.
How do we make the batch field to be copied over from the production order.
Thanks in advance.
Regards
Tom

Similar Messages

Batch is not determined automatically in PRODUCTION order for components

Hi All,
Am working on the batch determination for the components by Goods receipt date(FIFO) during production order confirmation.
All the required settings are completed upto batch determination.But when click on the batch determination tab,batch is not picking in production order confirmation goods movement screen even though three batch stocks are available.
Kindly find the attachment for your reference.
Would grateful to your quick response.
Thanks!
Asirvad

Hi,
In general it should not be a problem. Request you to check below:
For the Batch Determination to work in production order for the components, you should have a value for the “batch entry” field. The values if set to “3” will carry out batch determination automatically and if set to “blank” will not carry out batch determination for the components in the production.
As well please refer the link for step by step checking.
SAP Batch Determination - SAPs'WORD - We SAP For Your Cause
Hope success :-)
Regards,
Krishnendu.

Item Quantity not Copied exactly from sales order while creating Invoice

Hi Experts,
at
My Functional Guy encountered a strange problem while creating Invoice from Sales Document.Actually there are 6 line material items in the order and the sixth line item is having a quantity of 8EA While trying to generate an invoice from sales order the sixth line item billed quantity gets converted to 70EA automatically in the invoice .This only happens with the sixth line item and the remaining all are fine.I have checked OSS Notes and could not get a.ny fruitful results.Please let me know if you have any suggestions.I also checked with the functional guy whether its the problem due to copy controls.But everything is fine.Please help
Best regards,
Lakshman

Are your invoices combing multiple delivery line items based upon copy control/invoice split/combine configuration settings?
If your order was for 8 and you delivered 8, and there is no conversion for units, and the only quantity being included is for a single order line and delivery line, then there must be an error in customer-written exit or enhancement code that you have yet to find. What do you see in debug when the data for this line is being collected and set?
Edited by: DaveL on Sep 6, 2011 4:19 PM

Shipping conditions in Contracts not copied over to sales order w/ref

In standard SAP the shipping conditions are pulled in from the Sold-to party's customer master unless the shipping conditions are hard coded in the sales order type, in which case they overrule the shipping conditions of the sold-to.
A client enters contracts (CQ) with their customers and creates sales orders with reference to these contracts. The shipping conditions within these contracts are different from those on the Sold-to master record. The client wants the shipping conditions from the contract to flow through to the sales orders created with reference to the contract (instead of the system currently getting them from the sold-to). I do not believe this is standard functionality but I want to be absolutely sure before I respond to the client and tell them that we will have to create a custom routine in copy control to achieve this from the contract.
Other than tweaking copy control routines is there any way the system can be configured so that the shipping conditions from the Contract (CQ) header get pulled in when a sales order is created with reference to the CQ contract?
Any help/suggestions would be greatly appreciated.
Thanks,
SJ

Hi,
Whatever be the shipping conditions in contracts that can be flow to sales order,
Please check your input, if you mentioned in sales document then remove from there - VOV8
Also check in copy controll - VTAA
CQ to OR at header level
Copy requirement - 001
Tickmark to complete refrance
Kapil

Batch is not copy from inbound delivery

batch number is enter in inbound delivery but when perform MIGO - Inbound delivery,the batch is not copy over ( shows blank )
anyone know the reason?

Hi Sasy,
The vendor batch in the purchase order has preference over the vendor batch in the inbound delivery. The vendor batch in the purchase order is the one which is always updated in MCHA.
If there is not any vendor batch in the purchase order and this is only specified in the inbound delivery then, the system behaviour depends on the transaction used for the posting of the receipt :
If the receipt is posted with the shipping transactions VL31N/VL32N, MCHA-LICHA is updated with the vendor batch in the inbound delivery.
If the receipt is posted with the inventory management transaction MIGO, MCHA-LICHA is not updated. The vendor batch in the inbound delivery is not considered. MCHA-LICHA remains empty.
Regards,
Mauro

Deletion of Serial numbers/ Parallel sequences from production order

HI ,
I am trying to delete the Serial numbers from the production order programatically using the FM SERNR_DEL_FROM_PP. I dont get any error , but the serial number is not getting deleted from production order. If anyone have used this FM for deletion Please let me know what extra has to be done.
Similarly i have a requirement or deletion of parallel sequence from the production order. Any FM to do the same?
Code screenshot below
CALL FUNCTION 'SERNR_DEL_FROM_PP'
       EXPORTING
            material              = i_matnr
            j_vorgang             = 'PMP2'
            ppaufnr               = i_paufnr
            ppposnr               = i_itemno
       IMPORTING
            anzsn                 = l_num_serno
            ZEILEN_ID             =
           SERIAL_COMMIT         =
       TABLES
            sernos                = gt_sernos
       EXCEPTIONS
            serialnumber_errors   = 1
            serialnumber_warnings = 2
            OTHERS                = 3.
DATA ls_afpod_po TYPE afpod.
MOVE-CORRESPONDING gs_afpod_po TO ls_afpod_po.
*.....Update Number of serial numbers in parent order
ls_afpod_po-anzsn = l_num_serno.
update afpo
set anzsn = l_num_serno
where aufnr = i_paufnr and
        posnr = i_itemno.
commit work AND WAIT.

Hello,
the function module SERNR_DEL_FROM_PP calls the function module SERNR_DEL_FROM_DOCUMENT within. There, the changes are only written into the memory.
See also the code below:
CALL FUNCTION 'STATUS_BUFFER_EXPORT_TO_MEMORY'             "P99K058111
        EXPORTING                                             "P99K058111
             I_MEMORY_ID = MEMID_STATUS.                      "P99K058111
The variable memid_status has the value 'SN_STATS'.
So if you want to update the data, you have to call the following function module:
CALL FUNCTION 'SERIAL_LISTE_POST_PP'
EXPORTING
    MEMORY_ID_STATUS       = 'SN_STATS'
Regards Simon

How to output serial number from production order in GLM ?

how to pull serial number from production order in wwi template for GLM ?

Hi,
Please have a look to this thread:
BAPI/RFC to get serial numbers for a production order
Hope it helps,
Kr,
m.

Upgraded from CS5 to CS6 - Serial number not for a qualifying product. Chat not available

I get a page saying "serial number not for a qualifying product. Please try another. " during install. I upgraded from Design Standard CS5 to Design Standard CS6 .
Also, Chat is never available to me. 6 tries to no avail so far.
Any help would be most appreciated or if someone knows how else I can contact Adobe as Chat is never available.
Thank you.

I attempted to reslove via CS chat but was unable to get assitance due to it being "outdated".
In so many words: That's BS. Only support can look into the customer database and they have to sort it out. Contact them again, escalate the case to the next level until you get someone qualified enough to resolve your issue.
Mylenium

Batch Number field in IDoc for Process Orders (message type LOIPRO01)

Hello PP experts,
Just wanted to ask if anyone of you have worked with message type LOIPRO01 (IDoc for process orders)
There is a segment-field in this IDoc E1RESBL-CHARG which has description of "Batch Number"
We tried to assign a Bath Number for an Order (using t-code COR2 --> "Goods Recpt" tab under "Receipt" section), generated an IDoc for this order, but upon checking the E1RESBL-CHARG field of the IDoc it is not populated with the Batch Number.
The material in the process order is FERT, so technically we're trying to assign a Batch Number in one of the process orders for a Finished Goods material type, so not on the component level.
Can anyone here verify:
1. is the E1RESBL-CHARG field of IDoc LOIPRO01 intended for the Product Batch Number? If Yes, how do we populate that for in the IDoc? --> Do I need to have a Reservation/Dependent Requirement for the Product for the Batch Number to be populated in the IDoc?
2. If E1RESBL-CHARG can not be populated for a Product that has no Reservation/Dependent Requirements, Do I have any option of populating this field with just the Batch Number assigned to the Process Order of that product?

Solved - LOIPRO01 IDoc does not pick up the Batch Number from AFPO table, instead from table RESB. We need batch from AFPO and just created a lookup using the Process Order Number as import param

Why has iTunes seperated a album which I have copied over from my external hard drive into iTunes? How can you pull all the songs back together into one album again?

Why has iTunes seperated a album into indevidual songs, which I have copied over from my external hard drive into iTunes? How can you pull all the songs back together into one album again?

Steve MacGuire a.k.a. turingtest2 - iTunes & iPod Hints & Tips - Grouping Tracks Into Albums - http://www.samsoft.org.uk/iTunes/grouping.asp (older post on Apple Discussions http://discussions.apple.com/message/9910895)
Quick answer: Select all the tracks on the album, File > get info, and either give them all a single "album artist", or check the "compilation" flag (as in https://discussions.apple.com/message/17670085).
If these are from multiple-CD sets you may also need to enter the appropriate information in the disc number fields. If they are not a multiple CD set you still need to make sure the disc number fields are set correctly or all empty.

Purchase order from production order !! (Missing material no)

Hi,
This purchase order is created directly from production order.( My problem is the material number is no where shown on PO. but when I print it (print preview) i can see the material number along with the Production order number. I am writing a new report and need material no.
Interesting thing is, even when the Material no is missing. I can see the short txt for material as 'Galvanise'.
Pls help me in finding the material number.(item wise)
Thanks & Regards
Hrishi

Hi
1. Check table EKPO, if material number is stored against said PO,
2. Check ME23N, ME23N, ME22, ME23 screens are u able to see material no. in any of T-code.
If one of T-code not showing material number, it is sort of bug in system
Regards,
NNK
PS:Award points for useful ans

BOM explosion from Production Order

Hi All,
I understand from SAP Help files that we can explode BOM from Production Order using Read PP Master Data. But it also says, that we cannot do this if items have already been issued out. So would like to know is there anyway out to ensure that the production order is reading the latest version of BOM.
The reason i want to know is because, at present the BOM keeps getting updated & so the work order has to reflect the new items. The BOM contains about 300 or more items, so manual changes is very tedious & error prone at the moment. Furthermore some components are outsourced. So i want to receive them back & post new materials for them. Hope my problem is clear & await inputs
Vivek

Hi All,
Thanks for the inputs. I think for the situation am facing, the Order change management method, should be of help, as the BOM changes does not take place on scheduled dates, for me to fix the BOM explosion dates & assign them. As of now the BOM gets changed, depending the customer requirements, which is unpredictable.
Clarification required:
1. The profile which is created using OPL7 & assigned in OPL9 is unique, i.e. for any change numbers of BOM will always follow the profile entered in 'Overall Profile' in Work Scheduling view & i do not need to create new profiles for each new change number of BOM
2. Once i run the COCM with the new change number, in the production order - components view will i be able to see any error message for those items which no longer feature in the new version of BOM? & will the materials added in the new BOM automatically feature in that list or do i have to manually add these to the order & if so, how will i know which materials need to be added?
Hope the clarifications sought are clear, await inputs
Vivek

BAPI_CUSTOMERRETURN_CREATE does not copied over the pricing

Hi,
I need to create a return with reference to an invoice.
I managed to create the return sales order. However, I am not able to copy the same pricing as per the invoice item over.
It was being created with reference to the invoice.
Why is the prcing not copied over? the missing price is VKA0.
If I simulate it in TCODE VA01, I am able to get the invoice price over to the sales return.
Can someone advice?
Thanks

I had realized that the BAPI does not copied conditions from reference document.
Had modify standard to allow copying of conditions from reference document.

Error in MIGO Movement type 101 E is not planned.(Entry is not copied over)

Hie Experts,
I had created a process order for XYZ material. Now i want to assign this goods receipt to sales order. For this i am trying to go MIGO with mvt type 101 & special stock indicator as 'E'(order stock). I am facing the error as "Movement type 101 E is not planned. (Entry is not copied over)".
Can anyone help to solve this error.
Regards,
Piyush

Hie,
Thanks for your valuable response. But, my scenario is like this. I am doing goods receipts against PRODUCTION Order.
I want to take this stock as Sales order stock(Special Stock).
Can u pl help me for this scenario.
Regards,
Piyush

Open Multiple PDF files from Production order/Routing

Hi Everyone
We are in ECC 6.0 environment. We have a scenario where multiple documents were attached to single operation and also at multiple operations. But when I was trying to open these PDF documents, only the last file was getting opened and closing the previous file. How can I open multiple PDF files at one time from Production order or Routing?
Any help is appreciated.
Regards
Prasad

Hi Prasad,
from DMS standard I regret but such a functionality is not available. In the standard originals can be opened only one after another.
I think for realising this functionality an individual modificatoin is necessary.
Best regards,
Christoph

Batch Number Not copied over from Production order to Confirmation

Similar Messages

Maybe you are looking for