Batch Number Transactions report preliminary page
Hi Everyone,
I am trying to print a delivery document with Batches. The system prints the Batch transaction report along with the packing list which is good.
However, I do not want the first page that says - Batch Number Transactions Report - Selection Criteria page to be printed as it is of no use. Is there a way, we can disable this preliminary page from printing?
Appreciate your input on this.
Thanks,
Payal
You may check these threads:
Re: Supress Printing of Aging "Header"/Summary Page
Suppress Printing of Selection Criteria page
Thanks,
Gordon
Similar Messages
-
Batch Number Transaction Report
Dear Experts,
Is it possible to modify the form settings of Batches table in Batch Number Transaction Report as I need to add in some user-defined fields into it?
Below is the layout of my Batches table in the report:
Batches
# Item No Item Description Batch WhsCode Qty Status Manufacturing Date
and I would like to add in Width, Length & Height columns in the table.
I can't preset the value of length, width & height of the item in Item Master Data because different batches of same item will have different length, width & height. So I created these fields (Width, Length, Height) in Goods Issue & Goods Receipt and assigned different values there. After that, I need to do some references at Batch Number Transaction Report to find out which batches got the specified measurement of that item.
Thanks in advance.Hi Sachin. I think you have misunderstood what I mentioned before.
I want the report to show like this
Item No. Item Description Batch WhsCode Qty Direction Status T W L
A893S Pine 14 x 125 x 1030mm A123 WH01 100 In Released 14 125 1030
A893S Pine 14 x 125 x 1030mm A123 WH01 -10 Out Released 14 125 1030
A126B Ash 14 x 125 x 1090mm J123 WH01 50 In Released 14 125 1090
In fact, below is the result table that I get
Item No. Item Description Batch WhsCode Qty Direction Status T W L
A893S Pine 14 x 125 x 1030mm A123 WH01 100 In Released 14 125 1030
A126B Ash 14 x 125 x 1090mm J123 WH01 50 In Released 14 125 1090
using this query
SELECT T0.[ItemCode], T0.[ItemName], T0.[BatchNum], T0.[WhsCode], T0.[Quantity],
case when T0.[Direction]=0 then 'In' when T0.[Direction]=1 then 'Out' end Direction,
Case when T1.[Status]=0 then 'Released' end Status, T2.[U_Height], T2.[U_Width], T2.[U_Length]
FROM IBT1 T0
INNER JOIN OIBT T1 ON T0.BatchNum = T1.Batchnum and T0.Itemcode=T1.ItemCode
INNER JOIN IGN1 T2 ON T1.ItemCode = T2.ItemCode and T0.Quantity = T2.Quantity
WHERE T1.[ItemCode] =[%0]
Thanks,
Xavier -
Batch Number Transactions Report - TURN OFF
We are managing our batches in B1 2007A; however, our customers do not care what batches they're receiving, per se.
That being said, we do not want batch reports to be created each time an invoice is readied to be printed, as we simply X each report that appears (batch number transactions report, batch report in document). Can these be turned off if batch management is on?
Thank you!
Russell ClaytonThanks for the clarification request -
When we use the document printing feature, we can skip the generation/printing of batch number transaction reports and such; however, when we're doing one-off invoices (not a large run, which is common with our company), the simpleness of choosing print preview and only seeing the invoice pop up would be ideal, as we do not want to print the batch reports at this time (only track within the system). -
Batch Number Transaction Report Menu ID
Dear Expert,
Can you please tell me what is the Menu ID for the Batch Number Transaction report?
Thanks & Regards,
Tushar NathwaniHi Tushar........
Go to Start> All Programs> SAP Business One> SDK> SDK Help--> Type with Menu ID......
You can find the Menu ID List for all the objects used in SAP.
And the Menu ID for Batch No. Transaction Report is 1747....
Hope you are asking for the same what I told you........
Regards,
Rahul -
Error in Batch Number Transaction Report
Dear All
While generating 'Batch Number Transaction Report' in SAP B1 8.8 the following error occur which we could not solved:
"Runtime error
R6025 - pure virtual function call"
This occurs when selection is made on item properties for the report.
Please suggest solution.
Thanks & with regards
Aloke BandyopadhyayHi ALok......
Check the thread related to this problem........
Email and PDF Icon on AR Invoice Visual C++ Runtime Error R6025
Also this might be the Microsoft Issue or check Virus run also.....
Regards,
Rhaul -
Layout - Batch Number Transactions Report
Hi all,
Our customer has made a layout (IBT3, In Document Tree) in the report 'Batch Number Transactions' via "Inventory -> Inventory Reports -> Batch Number Transactions Report"
When you have filled the selection criteria in Batch Number Transactions Report and when you click on 'Print Layout Designer'-button you can choose 3 layouts that are:
- Without Transactions
- Specified (Including Transactions)
- In Document Tree
When you click on the 'Print Preview'-button the following layouts are available:
- Without Transactions
- Specified (Including Transactions)
And the layout "In Document Tree" is not available and why?
Thanks in advance,
ChiefChief,
The 'In Document Tree' option is the layout which is used when there are batches for a transaction and the batch report is printed along the original document - you can't print it from the Batch Numbers Transaction Report.
For example you create a GRPO with a batch managed item and when you print the GRPO there will be 2 documents printed: one for the GRPO itself and one for the batch numbers - this is the layout you set as default for the 'IBT3 - In Document Tree' option.
Hope it helps.
Regards,
Nat -
Unable to find data of Batch Number Transaction Report
Hi,
From Batch Transaction window with View --> System Information I found that the related table is RITL and RITN. But I could not find it in the table list of my database. My Database is SOL Server 2008 R2 and my application is SAP B1.
Can any one provide me information regarding the above table?
Thanks & with regards.
-- Pranjali SawantHi Pranjali....
Try This
case when T0.[Direction]=0 then 'In' when T0.[Direction]=1 then 'Out' end Direction, Case when T1.[Status]=0 then 'Released' end Status, T2.[U_Height], T2.[U_Width], T2.[U_Length] FROM IBT1 T0 INNER JOIN OIBT T1 ON T0.BatchNum = T1.Batchnum and T0.Itemcode=T1.ItemCode INNER JOIN IGN1 T2 ON T1.ItemCode = T2.ItemCode and T0.Quantity = T2.Quantity WHERE T1.[ItemCode] =[%0] and T1.[BatchNum] =[%1]
Regards
Kennedy -
Batch/Serial Number Transaction Report
when we created A/R Invoice or Return..we can see its Batch/Serial Number transaction report..in which table the barcode is saved?
i need this table because i want to create 'Reverse' transaction for it, so we can reconcile it and make new transaction with 'correct' value..
thx,
erickHello Eric,
BarCode is stored in OITM table, Field Name: CodeBars.
You can join the OIBT, IBT1 (Batches) and OSRI, SRI1 (Serial Numbers) tables into OITM table to get the transaction report.
Outgoing batches and serials are stored in the IBT1 and SRI tables, so it is enought to join them into the OINM view (table)
In 8.8 Views has been created for IBT1 and SRI1 tables.
If the items by Delivery note. In this case the delivery note is the key for the serials/batches transaction report. You may create a short development for displaying them in the invoice.
You may read the following blog to understand the basic queries and use them in practice
/people/janos.nagy/blog/2010/06/18/displaying-serial-numbers-batch-details-on-invoice-part-ii
So basics: (2007 and also 8.8)
Bacthes related to Invoices
SELECT T0.[BatchNum] , T1.[Quantity] , case when T0.[ExpDate] is null then '' else convert(nvarchar,T0.[ExpDate],102) end, T2.CodeBars FROM OIBT T0 INNER JOIN IBT1 T1 ON T0.ItemCode = T1.ItemCode and T0.WhsCode = T1.WhsCode and T0.BatchNUm = T1.BatchNum inner join OITM T2 on T0.ItemCode = T2.ItemCode WHERE
T1.[BaseType] = '13' and
T1.[BaseEntry] = [INVOICE_DOCENTRY]
Serial numbers:
SELECT T0.[IntrSerial], T2.CodeBars FROM OSRI T0 INNER JOIN SRI1 T1 ON T0.ItemCode = T1.ItemCode and T0.SysSerial = T1.SysSerial inner join OITM T2 on T0.ItemCode = T2.ItemCode WHERE T1.[BaseType] = '13' and T1.[BaseEntry] =[YOUR_INVOICE_DOCENTRY]
Regards
János Nagy -
Serial Number Transaction Report export to excel but serial not exported
Hi Experts,
I'm trying to export Serial Number Transaction Report to excel in a client database (SP00 PL47). Basically, the report has two screen, the Serial Number (Top) and Transactions for Serial Number (Bottom). When I try to export it, it only export the Transaction for Serial Number. We Need the serial number to be exported, how do we go about this? I tested same database on SP01 PL07 and exported the Serial Number and Transactions for Serial Number. Why is it working in other database, do we have settings that we need to configure?
Regards,
SaiHi Don,
In the serial number transaction report, when you click on the excel tab the Save as window will open just cancel the first window there is onther window opened, just save that window under the other name e.g. 123.
because both the window has same name.
Then check the excel file.
Regards,
Datta Kharat -
Serial number transaction report
Hi,
Where do I find Serial number transaction report?
Do any one know t.code or program name?
I am unable to locate following menu path,
Inventory >>> Inventory Report >>> Serial Number Transaction Report
Please some one guide me.
Thanks and Best Regards,
MohanTry using tcode OIYH: Serial Number List
Thanks & Regards
JP -
Serial Number Transaction Report Window isn't opening when adding AR Invoice
Hi,
For One of my Client the Serial Number Transaction Report Window is not opening when adding the AR Invoice.
In the Invoice all the item's that is present in the line level are SERIAL MANAGED and Management Method is ON RELEASE ONLY.
Why is it so?Hi,
Do you receive any error message? Is it possible to add without selecting invoice without selecting serial number?
What is your B1 version and PL?
Thanks & Regards,
Nagarajan -
Batch No. Transaction Report
Hi Experts !!
While taking report from batch no. transaction report if we select any property the following error is coming Microsoft Visual C ++ Runtime Library: Runtime Error [Program C:\Program Files\SAP\SAP Business One\SAP Business One.Exe R6025 and suppose if we ignore the property that time report is coming properly but if we want property wise report it is not coming
Edited by: Anshul_kumbhare on Oct 13, 2010 8:46 AMHi Anshul......
Check this one. Its similar ton your problem......
http://www.forumtopics.com/busobj/viewtopic.php?t=22158&start=0&postdays=0&postorder=asc&sid=63bf4b7dca522050e9b7e5cab024543e
Regards,
Rahul -
Batch No. Transaction Report Printing
Hi,
My client requires the GRPO no. of the raw material of which a finished good is produced to be printed on the batch no. transaction document or delivery/invoice. If the item is produced from two components, then GRPO no. of both. How to achieve this?Amol,
You probably can create a custom query report. It would be not possible to get this detail on
Batch No. Transaction Report Printing
Suda -
Financial / Ageing Report Preliminary Page
Hi Experts,
SAP prints a preliminary page when producing a few reports (ie P&L or Customer Statements).
Is it possible to switch this option off?
ThanksHi,
In the current system it is not possible to prevent "Preliminary Page - Accounting" to be printed/ emailed.
As a workaround, please kindly refer to the following workaround:
- Open Print Layout Designer, choose document type "Preliminary Page - Accounting"
- Open the Layout Template, chooose all the fields and set them to be invisible.
- Save the template as default one.
- Now when print/ email, the preliminary page will be blank.
Check if it helps.
Kind Regards,
Jitin
SAP Business One Forum Team -
Verification field for Batch number - Transaction LM05
Hi Experts,
Can some one help on the issue of adding a verification field for BATCH NUMBER on the screen 2502 and make it work.
Requirement : Add Verification field for batch number and build the logic to verify the batch number - as the SAP standard does for other fields.
I have proceeded to some extent and seems like I am not winning.
Steps done :
1. Copied physical screen 2502 (SAPLLMOB) to screen 9502(SAPLXLRF)
2. Changed the screen to subscreen and removed the OK_CODE from the element list.
3. Created the project ZMWMRF502 and assigned user exit MWMRF502 to this project.
4. In the components of the project assigned 9502(SAPLXLRF) to 1502((SAPLLMOB).
5. Assigned the screen 9502 to logical screen 0502 in the config.
6. In the transaction LRFMD given the username and variant '1'.
Now When I execute the transaction LM05 and give the TO number, the system calls my screen 9502 with new field seen in that.
But the screen is completely greyed out with no data in that.
I checked PBO and PAI of my new copied screen.
In all the modules which I received from the copy of SAP standard screen there is no code except name.
I mean to say that names of all modules exist but when I double click on any module it ask me to create a new object.
If I have to create module similar to SAP there is a lot of coding in side. How do I proceed further.
Can some help me.
Thanks and regards
JoshiHi Dez,
If you go in to transaction LM05 and input a number of TRANSFER ORDER, it will take you to a screen where the system will populate the fields pertaining to that particular transfer order. In that screen we have normal fields as well as verification fields for that particular field. These screens are used on scanners. When the scanner scans the material slip, the corresponding value such as material number, storage bin number etc will be get populated in the verification field. When the user selects next then the system will perform a check for the two values and pops up an error message if required.
So there are verification fields for material number, storage type, quantity etc but not for batch. Our user requirement is to put a verification field just by the side of batch number field and perform same operation as it does for other fields.
Hope you understood.
Thanks and regards
Joshi
Maybe you are looking for
-
I have recently upgraded my MacBook Pro to 10.9. I also used it to save a copy of files from my iMac that was being serviced (sytem reinstall). I now want to transfer files back from my Macbook(10.9) to my iMac which was loaded with 10.8.5. But they
-
MD06 report: by Product group
Hi, I am using the functional module "MD_MRP_LIST_OVERVIEW" to get the data like MD06 for one of my report. My problem is in functional module "MD_MRP_LIST_OVERVIEW" when I try to fetch the data based on "Product Group" (Selection by: Product group)
-
Sender File Content Conversion. Pls suggest
Hi All, I have to do the Sender File content conversion for the below file. First Line is for Sender. Second Line is for Receiver. Third ,Fourth and Fifth lines are Invoice Numbers which can be more also. The issue is coming that there is no Key Fiel
-
Can someone help me understand how I can use cable cards with external digital tuners?
Here's my situation. I currently have a PC with an internal TV tuner card. I connect the internal TV tuner card to a standard QIP2500-2 Set Top Box. I've never been very happy with this setup, although it mostly works. But, I can only record or
-
Oracle 8i Enterprise on Pentium IV machine
When I tried to install Oracle 8i Enterprise on a Pentium IV machine with the Windows NT OS having 256MB memory (RIMM), It simply does not work. When I clicked the Installation icon, the hourglass appears for couple of seconds and then stops as if I