Batch Numbers Skipping in Internal Number range Assignment

Dear Gurus,
We have Batch Management at Material Level. For a Material, we are facing an issue in Internal Batch Number Assignment. Systems Skipping 15-20 numbers buffer in Internal Number Assignment, we want it to be in a sequence. In OMAD for BATCH_CLT, No of Numbers in Buffer is 0.
Kindly guide me why the system is doing this.
Regards,
Johi Kapoor

No its not working. I want to set my batch number range from client level to material level. Kindly tel me how can i do that....?

Similar Messages

  • Account group with Internal Number Range

    Hello Gurus,
    With Internal number range assignment to the Customer Account Group, I am unable to extend the customer from one sales area to another sales area with the same Customer number.
    If I am not it is a standard feature that irrespective of the number range (internal or external), with the same customer number, customer can be extended to multiple sales area.
    Please correct me if I am wrong and suggest a solution.
    Thanks in Advance

    Hello friends,
    No error message but the next number is getting allocated.
    in VD01 or XD01
    the following steps r followed.
    1. Enter the Account Group
    2. Sales Area (New Sales Area for the customer)
    3. Reference Customer.
    4. Reference Sales Area.
    Rather than going to the sales area directly, General area screens are appearing.
    Upon saving saving the details New customer number is getting allocated.
    I have no clue where I have gone wrong...
    looking forward for suggestions.
    Regards

  • Numbers skipped while creating a new position (Internal number range)

    Hello,
    We have internal number range set up starting with 20000001 in PROD for Positions under OM.
    The last number used for position was 20000693. But while creating a new position, the end user got the new number as 20000705. I checked the t-code OONR and it shows the current number as 20000729.
    I have no idea why the numbers got skipped. Can anyone please let me know why this could have happened and how to correct it?
    Thanks in advance.
    Madhu

    Hi Donnie,
    The solution suggested by SAP lies in the SAP OSS Note 87865 - Buffering number ranges for personnel planning.
    Which says -
    ''During buffering of number ranges, gaps can result during number assignment. If you require a continuous number assignment, you must deactivate the buffering for the number range object 'RP_PLAN' in Transaction SNRO.
    However, this can affect the performance during numberassignment.''
    So the only way to get continuous number range assignment, the buffering option needs to be set to 'No Buffering'. But it can affect system performance and is considered a modification. So we decided to go ahead with the buffering option set in the standard configuration and not to deactivate the buffering for the number range objects.
    Hope this helps.
    Regards,
    Madhu

  • Number range assignment

    hi
    dear all
    at the time of assign internal number range for PR  system gives message " PL.ENTER VALID INTERNAL NUMBER RANGE"
    kindly help.
    thanks
    debojit

    Hi ,
    Please ensure you assign 1) Valid number range 2) check the number range what u are assigning is the internal or external.
    Create  number range in IMG MM->Purchasing->PR-> Number ranges . external box should be unchecked for internal numbers.
    Assign the number range in the settings for PR doc types....
    Regards
    Mani

  • Internal number range( alphanumberic) will be incremented automatically

    Dear All,
    Will the internal number range (Alphanumberic)  of the material master get incremented automatically.
    say,
    the internal number range we set is AW0000001 to AW9999999. The number range should be incremented
    Kindly reply for the querry
    Thanks
    Bakyaraj

    You can try with material Template.
    SPRO --> Logisitics - General -- > Material Master --> Basic Settings -- > Define Out put format for Material Numbers.
    Transaction Code : OMSL
    Activities
    1. Define the length of your material numbers.
    2. If required, define a material number template.
    3. Specify the form in which you wish to store your material numbers.
    For information on how to use the Lexicographical indicator, be sure to read the corresponding documentation.
    4. Specify whether your material numbers are to contain leading zeros.
    Note
    If the Lexicographical indicator is set, the system ignores the setting of the Leading zeros indicator.
    Indicator for lexicographical material numbers
    Definition
    Defines the way numeric material numbers are stored in the database.
    Use
    Caution
    It is only possible to set or reset (cancel) this indicator if no numeric material numbers have been used yet in the system since they would no longer be interpretable after setting or resetting this indicator.
    If this indicator is not set, numeric material numbers are padded with leading zeros and stored right-justified (example 1). Material numbers containing at least one nonnumeric character are stored left-justified (example 2).
    Example 1
    Defined length: 8 characters
    Internally/externally assigned number: 123
    Stored number: 000000000000000123
    Example 2
    Defined length: 8 characters
    Externally assigned number: 1A3
    Stored number: 1A3
    If this indicator is set, material numbers are stored as follows:
    If the material number (numeric or not purely numeric) was assigned externally, it is stored left-justified as entered.
    Example
    Defined length: 8 characters
    Externally assigned number: 123
    Stored number: 123
    Note
    Any leading zeros that may have been entered are stored too. This makes it possible to distinguish between the material numbers 123 and 0123.
    If the material number (numeric only) was assigned internally, it is padded with leading zeros to the defined length and stored left-justified.
    Example
    Defined length: 8 characters
    Internally assigned number: 123
    Stored number: 00000123

  • How to change internal number range into external number range

    Hi All,
    There is a number range in the system which was assigned internally by mistake earlier. Now, I want to change the internally assigned number range to external number range.
    Can anyone please let me know, the procedure to change used number range from internal number range to external number range and from external number range to internal number range.
    Quick reply will be appreciated & points will be assigned.
    Thanks & Regards,

    hi Mehak,
    you can try to simply change the range from ext to int (and vica versa). If that does not wrok, than you can delete the range and recreate it with proper settings. But you have to take into account that if you have a range as external from 1 to 10 and for example numbers 2 and 5 are taken already than you recreate the range 1..10 as internal, than you could have some problems. Probably best is in this case to recreate with other interval.
    hope this helps
    ec

  • Post depreciation with external number range assignement

    HI
    When i am running Depreciation  run AFAB, i am getting error"created doucment number range with internal assignement. 
    Currently the number range assigned for documents is external.
    Why this error is coming... please provide solution without changing number range to internal..
    Thanks and regards
    Ramarao.p

    HI
    see the SAP document .....
    Specify Document Type for Posting of Depreciation
    In this processing step you determine the document type for each company code for posting depreciation.
    Standard settings
    SAP supplies document type AF for depreciation posting.
    Requirements
    You must have defined the document number ranges.
    Activities
    1. Check the standard document type AF. If needed, define your own document type.
    2. Specify the document type for depreciation posting. The document type you select must meet the following conditions:
    It must be a document type for batch input.
    It must be defined with external document number assignment
    So please provide the solution ...with out changing internal number range...
    Thanks and regards
    Ramarao.p

  • Wrong internal order number for internal number range

    Hi,
    I have created an internal order type and assigned the internal number range 450000-459999. When we checked the numbers given for the system there are missing numbers. For example; the numbering is OK up to 450013 numbered order and the next order has 450020 number, and next one has the 450040
    number.
    I checked the COAS table and there are no number used by any other order. What can be the reason for this situation? How can we fix the problem? Is there any one who face the same problem?
    What are your suggesitions...
    Thanks in advance
    Ahmet

    Hi,
    I have similar kind of query. How to use the numbers that the system jumped? Is there any record/history of unused numbers present in any table? Thanks in Advance!
    Regards,
    Nidhi

  • Vendor Creation (Internal Number Range)

    Hi,
    My client was creating a new Vendor. The same has an internal number range.
    However, the last vendor created was 110016...... while creating a new vendor, the system assigned vendor 110020 as the next internal number, instead of 110017 to be assigned.
    Kindly assist as to why has this happened and where can i check the same?

    Thanks.......
    However that number range has not been assigned to other vendor group....
    Also, I have heard of number range buffering in SAP......What is that? How it works? Is there any T Code to check this buffering or any additional configuration is required?
    Kindly assist on the same........

  • Internal number range

    Hi All,
    I have defined the internal number ranges and assigned to vendor account group but when i create a vendor master  record the system allocating number randomly instead of serielly
    why this is happened ?
    Regards,
    Rajesh

    Hi,
    You may have Number range Buffer for Vendor No Range.
    goto T.code SNRO and check for Vendor number range.
    Hope this helps, please assign points.
    Thanks,
    Rau

  • Assingment of Internal Number Range to different type of Maintenance Order

    Hi..
          We are implementing SAP Plant Maintenance. We have created 10 order type. We want to assign 10 number ranges to the order types. During "Configuring of Number Range" t.code OION , when I am inserting new groups for all 10 type of order, it is not accepting by the group name. Number range which i am giving to the desired group is saved in other groups.
           Can anybody help to adopt the right process sothat I can assign the correct internal number range to different order types.
    Thanks in advance.
    Regards
    TP

    Hi Pramod,
                   Please follow the procedure mentioned below:
                  Configure number ranges.
                  1. In the menu bar go to Group & Insert
                  2. Enter the Text & the interval i.e number range.
                  3. Now add the new group using the symbol ( + )
                  4. once this is done the new group will be reflected.
                  5. Then select the element ( order type) i.e to be assigned using F2 key.
                  6. Enable the check box against the new group ( respective group)
                  7. Now in the menu bar press Element/Group tab ( or Use F5 key)
                  8. The selected element(order type) will be assigned to the particular group that you have
                      selected.
                  Hope this will help you resolve the problem.
    Thnaks & Regards
    Arun Vijay D

  • Internal number range for SP

    Hi All,
    Please help to find out why system does not assign continuous running number for new sold-to-party account group.Why Internal number range of sold-to-party assigned by system not in running sequence.
    Thanks & Regards,
    Pallavi

    Hi pallavi
    Go to OVT0 and select the sold to party account grp and and in that details you can see the number range field ,there you can check what number range has been assigned to the account group. Another way is go to OBD2 and check the sold to party account grp which number range has been assigned
    Regards
    Srinath

  • Copy of Internal Number Range of extended withholding tax

    hi,
    Can any one tell me the transaction code for copy of the Internal Number Range for extended withholding tax from one year to another year
    points will be assigned
    thanks in advance

    hi,
    use t.code:J1INUMBER
    all the best
    Prasad

  • Project Name - Internal Number Range

    Dear All,
    When we create a solman project, manually we give the project name. Want to know whether it is possible to give a internal number range from which the project number should be picked automatically when we create a project.
    Thanks and Regards
    Saravanan.p

    Hi Saravanan,
    You can assign an internal number range with respect to the Project name.
    Go to TC <b>CRMC_NR_RA_SERVICE</b>
    there by selecting the interval tab you can define the number range in which you want your support desk message corresponding to the project.
    hope this will help you out, if not then post your recent error.
    Rgds
    Manas

  • Ragrding internal number ranges fro BP

    Hi,
    i want to use the internal no ranges[BP] for SAP CRM and EXternal system not like internal no range for one system and another one external number ranges.
    Can you anyone how to setup both system internal no ranges and wht are the things are required to map the BP number ranges?.
    regards
    geetha

    Hi Geetha,
    What I understand is you wish to maintain only internal number ranges for the business partners created in CRM as well as coming from R/3 system like R/3.
    1. First create an internal number range in Transaction BUCF.
    2. Assign grouping to the number ranges.
    SAP Implementation Guide -> Cross-Application Components -> SAP Business Partner -> Business Partner -> Basic Settings -> Number Ranges and Groupings -> Define Groupings and Assign Number Ranges.
    Here u can mark ur number range as Internal standard grouping.
    3. For the external system, eg. R/3, maintain setting in transaction PIDE of R/3 system.
    But generally it is advisable to go for an external number range, when external systems are involved, so that we can retain the same number of the business partner in both the systems.
    eg. CUST-111 in one system will be called CUST-111 in CRM as well, but keeping the number range internal will change the number of business partner in CRM like 3434 etc.
    Regards,
    Shalini Chauhan

Maybe you are looking for

  • User exit/BADI for delivery creation in VL10B

    Hi, Is there any exits available for restricting the document type while the deliveries are selected/processed using VL10B/VL10G - delivery creation in background. Scenario is when deliveries are created for STO's,thedelivery is to be created for a s

  • UPS Worldship integration with BC

    Hey Everyone, I need some help integrating UPS Worldship with a Business Catalyst site. I have no experience working with the BC API or any other for that matter. Is this something that BC makes easy enough that I could do it following a tutorial or

  • Hulu and Netflix aren't working despite updates.  Help!

    Hulu and Netflix are asking for updated versions of Adobe Flash Player and Silver light..I've done this successfully and these programs still don't work.  How can I fix this?

  • **** pop ups on ipad 2

    In the last two days pornographic pop ups are coming up in my Safari browsing session.  I have cleared the cache and history, have pop up blocker on and still they persist. How can I stop these.  They only occur on my Ipad 2 using ATT.  They do not o

  • Startup config missing in MDS9020 switch

    I get failure message when copying running config to startup config. In bootflash:// I see only running-config and startup-config is missing. is it possible to create startup-config? how do I fix this issue?