Batch printing 1st page always bad

I have Adobe Acrobat 8 Professional. I have all of the updates, running on XP pro.
Whenever I batch print with it the 1st pdf is always to the wrong scale. All of the rest of the pdf's will be correct.
The pdf's are drawings. The 1st pdf will not show the complete drawing.
If I change the order then the pdf that was wrong will be correct and another pdf will be to the wrong scale.
I have this problem no matter how I try to do the batch printing.
I have moved the files to a directory and then batch printed them soley from Acrobat.
I can open an email in Outlook 2007 and tell it to print attachements, same problem.
I have tried it with numerous pdf's. It is always the 1st pdf in the batch. All the rest of the pdf's will be correct
Does anyone have any suggestions?
Thank You

Hello Jeff,
The problem you are having with the Canon PS and UFR2 driver is caused by the Paper Size > US Letter not being listed as a supported paper size. Instead, these two drivers have Letter, not US Letter. Therefore, when you do have the Page Setup > Format set to Any Printer and the Paper Size set to US Letter, the finishing options are not available.
You will notice an interesting phenomena via the Page Setup pane. Open an application like TextEdit, go to Page Setup and have the Format set to Any Printer and the Paper Size set to US Letter. Then change the Format menu to the Canon driver and watch the Paper Size automatically change to Letter.
The solution to this is to delete the CanonPS and UFR2 driver and use the new Canon 'CUPS' PS v2.11 driver. This driver has US Letter as a supported paper size, so you can leave 'Format for' at 'Any Printer'. And the driver supports both the 5075 and C5185, so you models are covered. Note that you will still have to use the Fiery driver for the other C5185.
Re the mailbox, the format setting won't affect this function. Your comment about PCL not supporting it is interesting. The PCL driver on Windoze definitely works with mailbox so you must have some other gremlins if that is not available.
Regards,
PaHu

Similar Messages

Adobe Reader 9.1 only printing 1st Page of Documents

When printing documents from Adobe Reader 9.1.0, it will only print the 1st page of the document, even if I have 'All' selected when my print dialouge box pops up.
Any ideas on a fix?

Hello:
You might also wish to supply us with the printer make/model and if it's a local or network printer. Similar issues in the past have been resolved by updating the print driver.
Thanks!
Michael

How do I print 1st page of PDF?

For example here: http://periodic.lanl.gov/downloads/PeriodicWebSite.pdf.

4thSpace wrote:
For example here: http://periodic.lanl.gov/downloads/PeriodicWebSite.pdf.
For most documents, select 'Print' and then select 'From 1 to 1' in the print dialog.
Note that some .PDFs are locked and won't let you do various things, which may or may not include printing just one page.

Cannot print 1st page from tray 2 and rest of document from tray 4

I have letterhead paper in tray 2. If I went to printer features and select letterhead paper The print will pull from tray 2. If in paper feed options I select the first page to be pulled from tray 2 it will not and pulls from tray 4. I've deleted the printer and re-added the printer and that did not resolve the issue. HELP!!

First suggestion is to update to 5.0.2. Does this occur with the PCL
driver? Clone postscript drivers on HP printers have been known to be
troublesome.
Bob

Acrobat prints 1st page in landscape & all others fine

Hello All
The client with Adobe Reader 8 on a Windows Xp Pro SP2. On every PDF document - whether from online or internally within the company - when printing to a b/w or color printer, the very first page comes in landscape format and all the other pages print out just fine in portrait format. Now surely there are documents that are created in landscape and can be seen that way but this is for normal documents that in other PCs print just fine.
Any information is gladly appreciated.
Thanks in advance
Leon

You might try printing to another PDF and see if you get the same result. If not, it might be a driver issue. You might also try a different printer if available. The problem is to run down where the problem is. Have you checked the lower left corner of each page of the PDF to see if it is indeed 11X17, or the following pages are actually small even there (I assume you may have full page view on or full width).

Can only print 1st page of mulitple page document

I know the fix for this but I was wondering if anyone figured out a way to deploy this. My company has over 6000 computers and we are getting a ton of calls on this. Please advise if anyone knows a way to deploy this or if there is a patch coming out for this. We are running WINXP SP3, WIN2000, and windows vista.
Thanks

The driver should be part of OS X, not something you download.
This link shows supported HP printers (6800 but no 6840).
http://support.apple.com/kb/HT3669#HP
I suggest you delete the printer, turn it off, restart your system, and turn the printer on and add it back in.
Barry

BIP (OBIEE 11.1.1.7.1): Different Headers on 1st page, middle pages, same header on last page as 1st page

Hello,
This is a much discussed topic but I still couldn't find a resolution.
The report I am trying to convert from Oracle Reports is an Invoice. The requirement is as follows:
On Page 1 The full header including company logo, bill-to, ship-to address, invoice number etc. Standard Invoice header stuff should print 1st page.
Page 2 andl subsequent pages should print a scaled down version of the above header to conserve space (and paper)
Last Page should have the Invoice Summary.
In case of a multiple page Invoice this setup works just fine. I have followed examples available in userguide as well as on the web. Used Different First Page option, created section break so that header on first page can be different than on subsequent pages.
PROBLEM:
The issue is that in case of a single page invoice, it prints with the scaled down header, invoice details and summary.
The requirement is that for single page invoice, the Full header and summary appear. I have put <?start@last-page-first:body?> <?end body?> so that the summary appears on the single page invoice but the FULL header does not.
I have tired to follow (http://winrichman.blogspot.com/2008/08/different-page-header-and-footer.html) but it doesn't seem to work.
How can I create the necessary breaks in Word so that I get Full header on 1st page, scaled down header on other..pages and in case of Single Page Invoice, include FULL header and Summary on one page?
Thanks,
Manish

Hi Tim,
Forgot to mention that there is also a 3rd page which needs to display Part 3 and a different header text which is not something from page 1 or 2.So I guess the even/odd pages in page setup wont work as the 1st page header will be displayed on the 3rd page which is not what is expected.
I think this is not achievable in MSWord. Is this possible if I use a PDF template?
Ashwini.

How to print just the 1st page of multiple emails?

Hi dear fellows,
my company sends out newsletters to 1400 subscribed users every now and then. And of course there're always some error messages coming back. In the batch of last month it were 341, each 3 pages long with an error log and the newsletter. Now, for documentation purposes and to deal with the various issues, I would like to print the error messages 2x2 per page, without the attached newsletter of the original message. With Entourage it was a matter of minutes, now I'm trying for hours and I'm out of ideas.
Basically I'm looking for the the command: "print the 1st page of each of this 341 mails with a 2x2 layout"
I appreciate your help, thanks a lot and have a nice weekend,
greetings from Germany, Berlin,
Jan

HI,
Just create a Standard text, if you are going to use this standard text in other layouts also... and use it otherwise you can hard code it as this its of only 10 lines.
declare one more element in the main window itselft and call it atlast it would print in the last page..
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'FOOTER'<b><- This element should contain the agreement details</b>
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
EXCEPTIONS
ELEMENT = 1.
Thanks
Mahesh

HP 895CSE Prints Weird Characters on 1st Page per Print Job

My printing always prints one line of characters on the 1st page, followed by the correct document on the second. When I had the previous operating system, no problem like this occurred. I have reinstalled the printer driver for OS 10.5, still same result. Any suggestions?

My printing always prints one line of characters on the 1st page, followed by the correct document on the second. When I had the previous operating system, no problem like this occurred. I have reinstalled the printer driver for OS 10.5, still same result. Any suggestions?

Is there a way to automatically add the filename in the page header when batch printing text files directly from finder?

hello, i have 80 text files (docx). the finder preview works great and i can open them in pages.
I need to batch print them from finder:
I select all the documents > drag on printer's icon> printer puts them in queue ( after an on the fly pdf conversion) ad starts printing.
BUT
i need the filename printed on each page ( in hearder or footer) , not only the regular text content.
Do you know if there is a workaround?
thank you
Tullio

If that section has an ID or NAME attribute then you can add that to the URL (#anchor) that you want to reload.
See View > Page Source
https://support.mozilla.com/en-US/questions/774792#answer-128100

How to print the Actual Check on 1st Page if line items are more for F110_p

Hi,
How to print the Actual Check on 1st page if the line items are more in F110_PRENUM_CHCK script. The standard script is printing at the last page of line items.
I tried using
IF &PAGE& EQ '1 '
/E 545 --> text element
ENDIF
but it is of no use.
Please let me know if anyone knows. Thanks in Advance.

Hi Krishna,
I guess, there is no other possible way to acheive this without modifying the standard driver program. Why because? in you driver program you check window will be called only on the last page... but before you change your driver program give a try like shown below....
Not sure, but give a try... In the first page you will be printing some void check try to replace the code inside the text element of void check with original check and make all the check void... note: in this text element, be sure you write two conditions...
IF &PAGE& = 1.
**PRint all check values..
ELSE.
***Print void values
ENDIF.
Close the thread if your question is answered.
Regards,
Sairam

PSC 1510 always prints test page on startup; settings menu no help

Hi,
My HP PSC 1510 All-in-one printer always prints a test page when I start it up, wasting ink and paper. I tried two things, neither of which solved the problem:
- Checking the settings, services, and every other menu I could find for any related options. Some other random help forums said there was a "print test page on startup" option somewhere, but I found nothing of that nature.
- Aligning the printer, as instructed by the test page it keeps printing out. Its first alignment failed, but the second alignment seemed to work. However, it still printed a test page the next time I started it up.
Extra information: I'm on Windows XP, and HP Software Update tells me there are no newer updates available. Also, this printer was sitting in the closet for a couple years--I only just recently hooked it up and gave it a new ink cartridge (so I can't say how it behaved before I gave it a new cartridge since it was on the shelf with no ink for a long time).
Thanks!

Alv List print printer information in 1st page

Hi,
At the time of alv list printing the following information is printed on 1st page. How to avoid this information when printing.
INITSTRING
Start r_3-Prolog
Drucker : Wipro EX-330+DX
System : RAP (reprdfo)
User : 11BO
End r_3-Prolog
Thanks in advance.

Hi GoldMoon,
(edit) Print another basic ABAP list (print anything else) on the same printer to see if that first page is printed. If yes, it's probably either SAP, OS, or Print Server cover page. They are explained in "cover page" SDN wiki, there are explanations how the cover page can be output (and so you can deduce how to remove it).
Best regards,
Sandra
Edited by: Sandra Rossi, 5 minutes later

PDFs are always printed 2 pages per sheet

My system was reformatted recently and everything had to be reinstalled.
Acrobat Reader XI (11.0.2) and Acrobat Pro 9 (9.0.0*) are now having problems when printing PDFs: every PDF is always printed at 2 pages per sheet. The resulting 4-point type printouts are not useable.
Word prints 1 page per sheet.
I'm not exactly sure where to even start troubleshooting this. Any suggestions would be welcome.
Thanks in advance!
*Yes, 9.0.0. When I accepted the last automatic update, Acrobat Pro started crashing on startup. I uninstalled and reinstalled, and am very, very wary about accepting an update right now.

Well, that was interesting.
After running the Acrobat Cleaner from the above link, on both Acrobat Pro 9.0 and Reader 11.0.2, it looked like everything was gone.
However, the company uses CA's IT Client Manager, and its DSM Software Delivery Catalog thinks that Acrobat Pro is still installed. So does Add/Remove Programs.
Six system reboots and A long call with the help desk later, my case has been escalated to the CA team and we'll see what happens now.
Reader 11.0.2 is reinstalled, and now? It can't print AT ALL. I get this instead of a printout:
ERROR: undefined
OFFENDING COMMAND: Pscript_WinNT_Compat
STACK:

Lexmark T630 network printer - always prints 2 pages per sheet

I'm trying to setup a Lexmark T630 for printing under Leopard 10.5.2. The printer prints just fine, but it always prints documents as half a sheet, thus, printing 1 a document with 1 page results in a sheet that has the page printed on one half and the other half is blank (as landscape). 2 pages will result in a landscape that has both pages on one sheet, next to each other.
Layout -> Pages per sheet is set to '1' .
I've tried setup with AppSocket,IPP or LPD , using the Lexmark provided driver (both from Apple and from lexmark.com) and a generic postscript driver.
I've tried various paper sizes (the paper is A4) , I've tried printing in landscape and portrait, scaling the pages to 50% or 200% and anything else I could think of.
Event the 'print test page' from http://localhost:631 (the CUPS web service) results in half a page, landscape, with the test page on the left side as a portrait.
Any Ideas..?

Did you try throwing away the com.apple.printing files in your <home>/Library/Preferences folder? It sounds like a preferences file, but you could also try resetting the print system by holding down the control key while clicking in the list of printers in Print and Fax Prefs.
Hope this helps.

Batch printing 1st page always bad

Similar Messages

Maybe you are looking for