Batch Process Crashes Computer. Help!

Hi There
I am trying to run a batch process through photoshop cs3 on Vista and it keeps crashing part way through. The process opens existing files, runs a sharpening action, saves and closes the file. It seems to work for about 5 minutes and then my whole computer just shuts down. I'm trying to run this through a few hundred files that are small res. Is there a limit on # of files that batch can run?
any information would be handy...I have over a thousand files I need to run this on!
Thanks
John

No, not that I'm aware of. The question is, whether your source files are actually all intact, if you may have user permission problems or if you are simply running out of memory at some point due to the filters used. In the last case, adding some purge commands might help (though I'm not certain if this is supported)...
Mylenium

Similar Messages

Batch process crashes

Batch process crashes in 32 bit CS5 but works fine in 64 bit.
Deleted preferences file, ran SFC and CHKDSK. Performed all computer maintenance.
Widows 7 64 bit Quad core Q9300 processor 6 gigs of ram. Ran MEMTest and reinstalled Photoshop over top of old installation.
Really don't want to start from scratch.
Please help.
Rich

Tried setting everything the same. I put RAM usage at 70% for both versions
but of course the actual amount is different for 32 and 64 bit versions. No
luck.
This started at about the same time as the 12.0.4 update. Read some people
had other types of problems with this update. I would just use the 64 bit
version but some of my plugins only work with 32 bit version.
Thanks

Image matte key: batch processing possible?

Hello again,
I have a question concerning batch processing with Premiere Pro CS5.5.
I would like to apply an image matte key to about 30 videos. The matte doesnt change, neither does the background photo.
I would like to know if there's a way to apply this to all the videos at the same time.
I have only been able to apply it to one video at a time, which means that I would have to do the same process 30 times. Because I have about 12 sets of background photos, I would have to do it about 360 times in the end. So batch processing would really help...
I need the videos to be seperate in the end (360 videos).
I hope someone has a solution for me. Thanks a lot in advance!!!

Check to see if this works:
Create and Import your Matte into PrPro. Place it on the desired Video Track, and then extend its Duration for all Clips on that Timeline. Apply the Track Matte Keying to the first Clip, and make the attributes adjustments to it. Rt-click that Clip, and choose Copy. Then lasso all other Clips in that Track, Rt-click on them and choose Paste Attributes. Does that work?
Good luck,
Hunt
PS - not sure if a Nested Sequence would also do what you want.

Batch processing images of various sizes

I'm trying to create 125 pixel square thumbnail images using a batch process and I'm having trouble getting it to work consistently with images that have different aspect ratios. I think I know why it's working the way it is, but I don't know how to work around the function. Here is what I'm doing that doesn't work when the image proportions change:
1. Resize image to 125 pixels high using the "constrain proportions" option.
2. Resize canvas to 125 pixels wide, thus cropping the sides to create the square image.
Then I have another process that does the same thing with images in portrait orientation. The problem is, I have some images that are 640x480, for example, and some that are 640x360. If I create the command using a 640x480 image, the 640x360 images are skewed when run through the batch because the "resize image" step is actually setting the dimensions of the image, rather than maintaining the proportions of that particular image. I thought about setting the canvas to a square first, but since not all my images are the same dimensions, I'm not sure how to account for that.
Anyone have any thoughts? I also have Photoshop, but as a novice, I've found Fireworks to be a little more intuitive for some of these basic commands, particularly batch processes.
Any help would be appreciated. Thanks so much!
Jeremy

It seems tricker than one might expect to create square thumbnails!
I'm a little confused by the results you're describing. When I try using Modify > Canvas > Canvas Size to crop a document, the result appears in the History panel as "Crop Document". If I select that step and choose "Copy Steps to Clipboard", then paste the results in a text file, I get something like this:
fw.getDocumentDOM().setDocumentCanvasSize({left:16, top:0, right:141, bottom:125}, true);
This reveals that the canvas is being cropped according to a specific bounding rectangle that may or may not be a great fit for all the other images being processed (depending on their widths). For a more foolproof result, a rectangle like {left:0, top:0, right:125, bottom:125} would be a better choice; however, aesthetically, I'd personally prefer that images be cropped from the center, not the left side.
If I had something better to suggest here, I would. It might be worth checking out Photoshop to see if this type of operation is any easier. Here's one online tutorial on the subject: http://demosthenes.info/blog/347/PhotoShop-Batch-Processing-Generating-Image-Thumbnails-vi a-Automated-Crop-&-Resize

Labview for batch processing

dear sir,
i am using labview7.0 for scada application using dsc module. In this application we are aquiring data from instrument. Now i want to develope scada software using labview dsc module for batch processing. But i donot have any idea about batch processing. Please help me to know more about batch processing. And how can i develope the scada software for that
thanking you
falgandha

Hello,
Batch processing typically involves raw materials that are
combined to mix or react in a certain sequence over a period of time to
produce the completed output. Often, different recipes are used to
combine the materials in different ways and with different sequences to
change the outcome. Automation is used in batch processing to precisely
control quantities, times and sequences (description found with a Google search of 'batch processing'), and you can use LabVIEW DSC to control your system. This is accomplished by using data items called tags bound to your hardware. To send a command to your hardware, you would write a new value to a tag bound to that hardware. Hardware could include PLC's, Fieldpoint controllers, RTU's, Modbus devices, etc. Most commonly, you will connect the tags to your hardware via an OPC server. OPC servers are available from NI, the PLC manufacturer, and several 3rd-party vendors such as Kepware.
Providing you with more detailed information will be difficult without a more specific question I can help you with The DSC Module help and shipping examples will get you started with creating your application, so I'd recommend giving those a look. If you have a more specifc question about how to do something in LabVIEW, let us know and we'll be glad to help!
Cheers,
Matt Pollock
National Instruments

Please help. When exporting a 720p video using Quicktime Conversion in FCP it saves some extra temporary files to my computer. The file is called ICMMultiPassStorage. This file gets so large that eventually the program and exporting process crashes.

Please help. When exporting a 720p video using Quicktime Conversion in FCP it saves some extra temporary files to my computer. The temporary file it saves is called ICMMultiPassStorage. This file gets so large that eventually the program and exporting process crashes. I have been able to locate the file using GrandPerspective and close out of FCP to delete it. But when I try exporting the movie again it creates the ICMMultiPassStorage file again. I have made sure my scratch disks are set to my external hard drive so I know that isn't the issue. How do I fix this problem so these temporary files are not being stored on my internal hard drive instead of my external?Thanks!

Try exporting the timeline "using current settings" via Make QuickTime Movie, then submit that clip to Compressor for the transcode. This should be faster and less painful.

AutoTrim & Include Subfolders From A Folder & Preserve Subfolder Structure & Auto Shut Down Computer - ALL In Batch Processing Mode And Match Volume Mode ?

Hi! I salute you all!
First of all I want to excuse my english (it's not my native language)!
In 2014 we are dealing with thousands of files (video, audio, etc.), because of the present powerful technology, still... we are missing very important and useful parts for doing our jobs properly and very quickly!
In this case is Adobe Audition too, in my oppinion!
Adobe Audition is a great program, which help us to edit in many ways our audio files, but... unfortunatelly has major missing parts, which would be nice to be implemented as soon as possible!
Some of them are are right below this line:
1. AutoTrim (for removing silences from audio files, before and after)
2. Include Subfolders From A Folder (when adding a folder for working with, we should have the possibillity to add its subfolders too)
3. Preserve Subfolder Structure (when exporting a folder with its all subfolders, we should have the possibillity to export the exact structure like the original)
4. Auto Shut Down Computer (when all the tasks/jobs are done, we should be able to auto close the program and auto shut down our desktop/laptop as well)
When you will add these features which are so wanted, to have them all in Batch Processing mode and Match Volume mode as well, please?!
Many other audio softwares have all of these "old" possibillities, like "GoldWave" for instance (I am not advertising it at all), but the Adobe Audition which is more complex...doesn't so far!
I thank you all and I really wait for these very next future feature requests!
Have a nice day!
P.S.: Is this message/question read by Adobe stuff members (persons who can take decissions in this way) too, or only by us, the comunity members?!

Hello Kavans,
Thank you for the details of the issue you are experiencing with your MacBook Pro. I recommend reviewing the following article for this issue:
Mac OS X: Why your Mac might not sleep or stay in sleep mode
http://support.apple.com/kb/HT1776
Thank you for using Apple Support Communities.
Best,
Sheila M.

Please Help, Issues when batch processing Multi Frame images in Fireworks

I hope someone will know how to do this and tell me where I am going wrong.
Objective 1
I have a large number of images that all have the exact same number of frames (4) and are all exactly the same size that I want to get resized, cropped and water marked (when I say 'watermarked I mean have my websites logo pasted in a specificlocation on each frame, I have my websites logo as a seperate .png file which I copy from).
Current Process
I create a command which will crop the image then paste my companys url/log onto the first frame, move it to the correct location on the frame then copy it again and then paste it onto each of the other frames, the command then resizes the image tot he exact proportions I want.
I start a batch process and use my command, making sure that I also export from the .png to animated gif (and I edit the settings to make it 256 animated gif).
Error 1
The process described above resizes and crops my images however it does NOT put the watermark in the correct place, it seems to put it int he right place on the first frame and then in a different place on all the followingn frames thus giving the effect of the watermark jumping around. Which is obviously NOT what I want.
Question 1
Please let me know what process I should be following to correct the Error 1 above.
Objective & Question 2
I want to do exactly the same thing as shown above but this time the files have a varying number of frames (from 2 to 45 frames (or instances as CS4 seems to call them)). Is there a way to paste my logo to the to the exact same location on ALL frames?
Other information
I have tried WHXY Paste extension and I can not see how to use that to solve the issue. I have also tried 'Paste in Place' however I can not see how to use the Paste In Place extension as it is not appering in my list of commands.
Many thanks in advance for your help.
Andy

Andy, you could start a batch process which will do most of the things you are asking for. THe batch process can be done using Fireworks. The right way to start is going to Archivo / Procesar por Lotes and then follow all the different option this tool has to offer. Yes, I know I gave you the names in Spanish but that is the way I use Adobe Fireworks.
I hope this was usefull for you!
Best regards,
Frank Meier | Curso Arreglos Florales

Need help with batch processing picture packages

Hi, I am having trouble batch processing picture packages is CS2. (Windows).
I have hundreds of images that need to be processed into picture packages and would love to find a speedier way to do this.
I know how to create an action. I know how to batch process from this action. I also know how to create picture packages, but I cannot get the final result I am after - please read on....
I have seperated all the images into their seperate folders for each style of picture package required.
I can create an action for the picture package required and then do a batch process on the particular folder, but this leaves all the picture packages open on the desktop - as when you chose the close and save in the batch process - this only closes and saves the original image - the picture package has been created as a new document and is on the desktop still open - named Picture Package 1, Picture Package 2 - etc etc.
I hope I am making some kind of sense here... (??!!)
What I would like to happen is that the picture package will be saved over the original file (or to a new folder) with the original file name of the original image or maybe even with an adjustment to file name (e.g - orignal file name sc1234.jpeg - new file name sc1234packA.jpeg)
So is this possible to do?? I'm thinking there must be a way.... i'm sure there are many group photographers out there who come across this everyday??
Otherwise I have to save each picture package manually to original file name (via searching though files to match the original image to the picture package....) Very time consuming.
Thanks for your help (in anticipation)...
Jodie

hmm - thanks for that - sounds like I will have to try and find some info and assistance regarding the scripting - it may be something I need to look into at a later time in the future....
At the moment though I will have to plod along with this method I guess!
Thanks for your assistance...
Jodie

Can someone help me with a batch processing problem

I just got my first Mac and I just loaded Aperture and unfortunately a deadline is upon me. I am used to Photoshop but I'm lost here looking at Aperture. All I need to do right now is to pop in CDs full of photos and produce thumbnails of them to put in file folders on my hard drive. I figure it's an automated batch process, but I'm just not seeing it among the functions of Aperture. I know this request may annoy some users, but I sure could use the help right now and I promise to use the tutorial and manual in the future.

If what you mean is make a bunch of small jpegs - just import the images into an Aperture project - select them all and use export version to put them out in whatever size/format you want. If a preset does not exist for your purposes - create a new one with "edit.." from the presets drop down menu in the export version dialog.
RB

Urgent help required : Batch processing error of an inbound idoc

hi,
i have a problem while posting an idoc to the GL(FB01).
i'm using an Inbound idoc message type : ACC_GL_POSTING
idoc type : ACC_GL_POSTING01.
Process code : BAPI.
In the transaction code OBA7 i have enabled a particular document type as BATCH INPUT ONLY.
i have set the option " Trigger by background program" in the partner profile (we20).
while testing the process i'm getting the error "Document type -- is only defined for batch input".
how can i overcome this error? can idocs be used to post for transaction that are batch enabled . plz help me.
with regards.
T.Jeyagopi.

Jeyagopi,
There are different types of Data loading into SAP.
BATCH INPUT / BDC / IDOC / BAPI etc. BATCH INPUT are standard programs that take the data and update SAP. I don't think that is same as batch processing of IDOC.
You might want to remove the setting of batch input, retain the batch processing in WE20 and try it out.
In my opinion it should work.
Regards,
Ravi
Note : Please reward points for the posts that help you.

Batch processing problems-can anyone help?

Setup: Quadcore, 4GB RAM, 4 internal drives all with plenty of space, Leopard OS, latest version.
Software: CS4 with Photoshop Extended; all updates installed. I also have CS3 installed; only use Bridge and PS in both apps.
Problem: Working in CS4. All edits/crops/corrections done in the Camera Raw window; all edits saved and viewable in Bridge. However, when I use Batch from the Tools dropdown (Tools > Photoshop > Batch), and check all the usual places, select an Action, select a Destination, and hit "Go", the results are totally weird. Some images process as expected, but many are at least two stops overexposed.
All individual files will Open, and can be Saved As manually; all works fine. That is in fact how my assistant and I got the job done tonight. The Batch Action is simplicity itself: Open, Save As (JPEG level 9), and Close file—but if I run Batch on the same files that can be opened and Saved As perfectly, it all goes crazy; three quarters of the files are totally overexposed, in blocks (10–25, roughly), and at random.
I have used the Ctrl + Alt + Shift after opening Bridge; I have run Cocktail; and lit the right incense. But this still will not work properly! Can anyone help???

Batching the same files in CS3 works perfectly, in terms of the processed JPEGs at least being correctly exposed, but the CS4-only edits (like the healing brush) are not recognised, nor are many, tho' not all, of the crops.
I have decided to deactivate and uninstall, then reinstall CS4, after upgrading to Snow Leopard. Usually, I wait for a few months for others to report on OS update interactions with CS and FCP, but since CS4 as installed was useless and I had done the usual resets of Preferences without any change to Batch Processing's reliability, I felt I could not be worse off.
So, after upgrading to Snow Leopard, I will reinstall CS4 (and all apps this time, rather than just PS and Bridge, as I usually do) in case there are soime weird unintended consequences of a Custom install.
Very frustrating and time-consuming, and I wonder what I might have done to create this problem—seeing as no one commented, I can only assume that this is an unique experience.
I will report back today, hopefully.

Acrobat 9.4.4 crashes when running batch process to remove metadata

I am attempting to run a batch process to remove metadata from all documents within a folder. Only one or two documents will process before Acrobat crashes. Any suggestions?
Thank you.

There may be a corrupted video or image file on your iPad.
Try to download from the iPad using Image Capture instead and save the photos to a folder. If that succeeds, you can check the files for corruption before importing them to iPhoto.

Help with batch processing

Hi, I am having trouble with batch processing. I want to apply adaptive noise reduction (ANR) to several files from the same source tapes. So, following the help instructions, I create a script from one file. When I try to apply it to the other files, instead of applying ANR to them, it simply saves them as is. The steps I perform are as follows:
I select the entire wave (I have also tried it without first selecting)
I open the scripts box in the file menu
I click on open/new script collection and create a new script
I title the new script
I click 'record'
I close the scripts box
I run ANR on the file
I go back to the scripts box and click 'stop current script'
I click add to collection
I close the scripts box
I open the batch processing box
I select the files, then the script, then I click to start processing
When I try to apply this to script to other files, it saves them but doesn't apply ANR.
Can anyone suggest what I am doing wrong? Also, in the scripts box, there are three options for the type of script that I can create. One is highlighted: 'Scripts start from scratch.' Is that the correct one to use? If not, how do I select one of the others? I click on them but nothing happens. Finally, when creating a script, do I save the file before or after clicking 'stop record'? I have tried it both ways but don't know which is correct (neither seems to make a difference).
Just to be as thorough as possible, below is the text of one of my scripts, in case that contains any clues. Thanks so much for any and all help!!
Collection: doubletnr
Title: d2
Description:
Mode: 2
Undo: 0
Selected: none at 0 scaled 109479495 SR 44100
Freq: Off
cmd: Channel Both
Selected: 0 to 109479494 scaled 109479495 SR 44100
Freq: Off
Comment: Restoration\Adaptive Noise Reduction
cmd: {EA93BBBE-0B8F-47D6-AC6D-B67B46524E41}
1: 52,AAAÛÚZAAQãýÇÛÚÚAAAĎč¸āĂ}úÓ~ipkiëåÁëåÁ
2:
3: 13
4: 0
5: 0
6: 3190728
7: 0
8: 0
9: 0
10: 1
Freq: Off
End:

This is what my script looks like. Although I was worried about the strange characters in the script, it does work.
Make sure that the script you use is suitable for the sample rate and bit depth of the file. E.g. if you have 44100/32-bit files, then don't use a script that was recorded on a file with e.g. 48000/16-bit. If required, resample or make different scripts for different rates/depths.
Collection: Test ANR AA Forum
Title: Test ANR AA Forum
Description:
Mode: 4
Undo: 1
Selected: 0 to 9233563 scaled 9233563 SR 44100
Freq: Off
cmd: Channel Both
Selected: 0 to 9233563 scaled 9233563 SR 44100
Freq: Off
Comment: Restoration\Adaptive Noise Reduction
cmd: {EA93BBBE-0B8F-47D6-AC6D-B67B46524E41}
1: 52,AAAÛÚZAAQãýÇÛÚÚAAAĎč¸āĂ}úÓ~ipkiëåÁëåÁ
2:
3: 13
4: 0
5: 0
6: 154705552
7: 0
8: 0
9: 0
10: 1
Freq: Off
End:

Batch Process for creating button sets in Fireworks - help

Hi,
I'm new to Fireworks still, I've created some really simple
buttons and I was wondering if it's possible to do a batch process
on them to repeat a few steps e.g. changing background colour,
border colour, text colour etc... It would save me lots of time and
I could make some extra sets then.
Thanks,
Rob

Actually Find and Replace will go through a directory as
well.
alex
PJR wrote:
> "sanchothefat" <[email protected]>
wrote in message
> news:ee8qm0$1pm$[email protected]..
> | Thanks Peter!
> |
> | You're a real hero, nice one
>
> Not sure about that! I'm struggling with this.
>
> I would set about this in a different fashion
>
> I would open a canvas say 600x600 and import all your
buttons onto the
> canvas.
> Organize them in a way that makes sense to you. You can
duplicate each set
> and alter the colours in several ways. In my example
>
http://www.fasterthanu.com/rob.html
I used Adjust Colour > Levels with just
> the backgrounds selected.
>
> Sorry I couldn't be more help
>
> Peter
>
>

Batch Process Crashes Computer. Help!

Similar Messages

Maybe you are looking for