Batch process crashes

Batch process crashes in 32 bit CS5 but works fine in 64 bit.
Deleted preferences file, ran SFC and CHKDSK. Performed all computer maintenance.
Widows 7 64 bit Quad core Q9300 processor 6 gigs of ram. Ran MEMTest and reinstalled Photoshop over top of old installation.
Really don't want to start from scratch.
Please help.
Rich

Tried setting everything the same. I put RAM usage at 70% for both versions
but of course the actual amount is different for 32 and 64 bit versions. No
luck.
This started at about the same time as the 12.0.4 update. Read some people
had other types of problems with this update. I would just use the 64 bit
version but some of my plugins only work with 32 bit version.
Thanks

Similar Messages

Batch Process Crashes Computer. Help!

Hi There
I am trying to run a batch process through photoshop cs3 on Vista and it keeps crashing part way through. The process opens existing files, runs a sharpening action, saves and closes the file. It seems to work for about 5 minutes and then my whole computer just shuts down. I'm trying to run this through a few hundred files that are small res. Is there a limit on # of files that batch can run?
any information would be handy...I have over a thousand files I need to run this on!
Thanks
John

No, not that I'm aware of. The question is, whether your source files are actually all intact, if you may have user permission problems or if you are simply running out of memory at some point due to the filters used. In the last case, adding some purge commands might help (though I'm not certain if this is supported)...
Mylenium

Acrobat 9.4.4 crashes when running batch process to remove metadata

I am attempting to run a batch process to remove metadata from all documents within a folder. Only one or two documents will process before Acrobat crashes. Any suggestions?
Thank you.

There may be a corrupted video or image file on your iPad.
Try to download from the iPad using Image Capture instead and save the photos to a folder. If that succeeds, you can check the files for corruption before importing them to iPhoto.

Batch processing using JPD suitability

Hello,
In our company, we are using Weblogic Integration 8.1.6 for batch DB processing mixed with some business logic. We have a few applications built around this: an event generator is fired and a JPD (with DB controls and other controls calling EJBs and WSs) runs to process large CSV files (8MB) into the DB, with some other queries for business data in between, on a daily basis.
However, we have been facing (and still are facing) many problems with those JPDs. It seems to me that they are not such a good choice for long running batches. There is always something: memory is to low, memory is too high (yes! there was a time when we had to lower the instance memory from 1.5GB to 1GB, to prevent it from crashing, after endless trial and error), the transaction timeout is too short (in the descriptors or domain wide), processes cannot be monitored in the WLI console for unknown reasons, transaction handling is not clear (you cannot avoid transactions inside the JPD; it is forced by default - you can only disable it through the datasource) and more problems that happened throughout the past few years, which required rather tedious trial-and-error solving.
My question is: are JPDs really suitable/intended for long batch processing? The event generators certainly invite you into using them for that purpose. Is anybody else using them for that? Or is everyone else happy with batch EXEs?
Edited by: KhaledWLS on Sep 19, 2010 10:37 AM

Please repost your question in the SOA Suite forum:
SOA Suite
This forum is for WebLogic Server and readers may not be familiar with WLI.

Batch Processing HDR

I've got to be making this unnecessarily hard... Bridge CC, PSCC, LR5.x
I've got a bunch of HDR sets, I want to process them into 32-bit files that LR will read (which as near as I can tell, means tiff). I want to do them in large bunches, not one at a time.
I"ve got Nik HDR Efex Pro, which doesn't appear to do batch.
I've got Photomatix 4.2, which does batch but doesn't appear to save 32-bit tiffs in batch.
HOW do I batch a bunch of sets and process them? I"ve seen a script, but isn't there some built-in way of using batch processing or Image processing or SOMETHING more efficient?

I THINK V5 of Photomatix may save 32-bit tiffs,
No, not after tone mapping or fusion, you can set prefs to open the file as 32 bit and then save as floating pointing tiff, but honestly, I only looked at it once and since my (nor most or any at all) monitor can't show 32 bit colors properly I would not know what to do with it I'm afraid.
But this option is also available in PP 4
but unfortunately I have V4 and when I tried the free update to V5 it told me my V4 was an upgrade password, so even though V5 is a free upgrade apparently it's not free if you've already upgraded to V4….
I had the same struggle but I believe this was due to having a to old license for version 4 (mine was almost 4 years old) for being entitled for a free upgrade. However they charge the very reasonable fee of $ 29,00 so I can't say they are to blame for this
And at the moment HDR Efex Pro V2 isn't working at all with CC. It crashes every time I try it. Even doing the instasllation as instructed in other topics here say, it's not working. I'll have to keep fiddling with it.
There are some strange things happening with NIK (maybe the transition to Google has something to do with it, I remember iView Media Pro being screwed thoroughly by Microsoft after they bought it and changed it to Expression Media…).
Never used NIK my self but both HDR Efex Pro 2 and/or Selective Tools are to my believe responsible for the rare ACR Exposure slider set back in combination with OSX Mavericks. If you remove one of the aforementioned plug ins from the Google folder (previous called NIK) in the PSCC plug in folder the ACR bug is gone.

In Bridge CS6, the "Tools" tab is missing the "Photoshop" option to batch process image

Hello!
Does anyone know why in Bridge cs6 under the "Tools" tab, my "Photoshop" option is missing? That is how I have always batch processed images. In Bridge, I choose the images to process, go to the "Tools" tab, down to the "Photoshop" option then to "Image Processor" and process. Now when I go into my "Tools" tab it only has the options: Batch Rename, 4 kinds of Metadata related options and Cache. Can someone tell me why this has happened and how to fix it? Thank you!!!
Eric

Hello Omke,
This problem lasted for two days. I tried many suggestions but nothing worked immediately. Suddenly I turned my computer on last night and it was fixed...inexplicably. Not sure what worked but something did. I appreciate you taking the time to offer advice.
Best,
Eric

How to display custom error message in Job log for batch processing

Hi All,
I am rexecuting one R/3 report in batch mode and i want to display all the custom error i have handled in job log when its executed from SM36,SM37. The custom error are like 'Delovery/Shipmet doe not exits' or others which we can display in online mode like message e100(ZFI) or any other way and accordingly we can handle the program control like come out of the program ro leave to transaction'Zxxx' or anything. But i want my program to be executed completely and accumulate all the error in job log of batch processing.
Can anyone tell me how can i do so...
Thanks,
Amrita

Hi,
Thats what i have done from the begining. I have written message like this:
Message i100(ZFI).
I was hoping to see this message in the log. But i cant see. Can you help me pleae...

Batch process to add Javascript to PDF files

Hi All,
I have written a small piece of Javascript for my PDF files. The idea is to add a date stamp to each page of the document before printing. To do this, I have added the following code to the "Document Will Print" action:
for (var pageNumber = 0; pageNumber < this.numPages; pageNumber++)
var dateStamp = this.addField("Date","text",pageNumber,[700,10,500,40]);
dateStamp.textSize=8;
dateStamp.value = "Date Printed: " + util.printd("dd/mmm/yyyy",new Date());
My question is this: Does anyone know of a way to batch process a whole directory (of around 600 PDF's) to insert my Javascript into the "Document Will Print" action of each file?
Many thanks for any information you may have.
Kind regards,
Aaron

> Can I just confirm a few things please? Firstly, should I be going into "Batch Sequences" -> "New Sequence" and selecting "Execute JavaScript" as my sequence type?
Yes, you are creating new batch sequence that will use JavaScript.
> My second question is, how can I insert my body of script into the variable "cScript"? I have quotation marks and other symbols that I imagine I will have to escape if I wish to do this?
You ca either use different quotation marks or us the JavaScript escape character '\' to insert quotation marks
Your will print code will only work for a full version of Acrobat and not Reader, because Reader will not allow the addition of fields. Also each time you print you will be creating duplicate copies of the field. So it might be better to add the form field only in the batch process and then just add the script to populate the date field in the WillPrint action.
// add form field to each page of the PDF
for (var pageNumber = 0; pageNumber < this.numPages; pageNumber++)
var dateStamp = this.addField("Date","text",pageNumber,[700,10,500,40]);
dateStamp.textSize=8;
this.setAction("WillPrint", "dateStamp.value = \"Date Printed: \" + util.printd(\"dd/mmm/yyyy\",\new Date());");

Opening and closing files very slowly -MAC - Batch processing broke illustrator...

I have been batch processing between 15 and 30 thousand svg files over the past few days(simply centreing the orbjects on the art board mergring overlapping objects and saving as AI's) - the individual files are very small 20kb max. this was working fine for a while but suddenly illustrator now takes nearly 30 seconds to open any one individual file - svg or otherwise - and also when I look at illustrator in activity monitor as files are opened illustrator uses 100% of the CPU.
I have no Idea if this is related to all of the batch processing Ive been doing lately but Its the last thing Ive done so...
Also I have run disk utility on my machine uninstalled and reinstalled illustrator with no success..
Anyone have any thoughts?
Thanks!!

Have you tried at least restarting AI or rebooting the computer?

Please Help, Issues when batch processing Multi Frame images in Fireworks

I hope someone will know how to do this and tell me where I am going wrong.
Objective 1
I have a large number of images that all have the exact same number of frames (4) and are all exactly the same size that I want to get resized, cropped and water marked (when I say 'watermarked I mean have my websites logo pasted in a specificlocation on each frame, I have my websites logo as a seperate .png file which I copy from).
Current Process
I create a command which will crop the image then paste my companys url/log onto the first frame, move it to the correct location on the frame then copy it again and then paste it onto each of the other frames, the command then resizes the image tot he exact proportions I want.
I start a batch process and use my command, making sure that I also export from the .png to animated gif (and I edit the settings to make it 256 animated gif).
Error 1
The process described above resizes and crops my images however it does NOT put the watermark in the correct place, it seems to put it int he right place on the first frame and then in a different place on all the followingn frames thus giving the effect of the watermark jumping around. Which is obviously NOT what I want.
Question 1
Please let me know what process I should be following to correct the Error 1 above.
Objective & Question 2
I want to do exactly the same thing as shown above but this time the files have a varying number of frames (from 2 to 45 frames (or instances as CS4 seems to call them)). Is there a way to paste my logo to the to the exact same location on ALL frames?
Other information
I have tried WHXY Paste extension and I can not see how to use that to solve the issue. I have also tried 'Paste in Place' however I can not see how to use the Paste In Place extension as it is not appering in my list of commands.
Many thanks in advance for your help.
Andy

Andy, you could start a batch process which will do most of the things you are asking for. THe batch process can be done using Fireworks. The right way to start is going to Archivo / Procesar por Lotes and then follow all the different option this tool has to offer. Yes, I know I gave you the names in Spanish but that is the way I use Adobe Fireworks.
I hope this was usefull for you!
Best regards,
Frank Meier | Curso Arreglos Florales

All Java Processes crash on RH Linux 7.3 / 6.3 without any comment

We have the following Problem on two Machines. We installed j2sdk1.4.0 first, then jdk-1.3.1_04 (Because of other Problems with 1.4.0).
Now all running java Processes crash after up to two hours without any comment, any error file. Looks like they were killed by the 'kill' Command. The running java Processes are different Programs, that do very different things.
The OS on the two machines are RH Linux 7.3 and 6.3 - normal installation without any essential changes.
I would be very happy, if someone have an idea, how to solve this Problem. If you need additional Information, ask for.
Holger

... if someone have an idea, how to solve this Problem.Seems like I remember seeing a problem like that.
It turned out that indeed it was the 'kill' command. Another process was running, looking for the app, and killing it when it found it.
We spend quite a bit of time trying to figure out why our app was 'crashing' before deciding to look elsewhere (when we discovered the other process.)

How to extract data from offline PDF files as batch processing

Hello.
I want to use Adobe Interactive forms as batch processing.
For instances,
1. Users download offline PDF files.
2. Users inputs data on their local PCs.
3. Users upload these PDF files in one folder.
4. Program can read data form PDF files on that folder. and put data to ERP at night.
I' d like to know how to implement a program with Java or ABAP.
Regards.
Koji.

Hi,
It's possible to do it but first be sure that the SAP system can read the directory while your program is executed in background .
Then you have to read the content of the directory and process each file you found.
Look at this standard ABAP object cl_gui_frontend_services , you will find method for browsing a directory and retrieve list of file .
Afterwards you have to process each file , for this have a look at this wiki code sample i wrote for processing inbound mail with adobe interactive form, it should help you [Sample Code for processing Inbound Mail with Adobe Interactive Forms|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/sampleCodeforprocessingInboundMailwithAdobeInteractive+Forms]
Hope this help you .
Best regards.

Report as batch process?

Can we run a Z program or report as background process or batch process? if yes, how?

Hi,
1. Go to SE38 give the program name and then from Menu path Program->Execute->Background. You need create the variant for selection screen
2. Go to SE38 give the program name and then execute on the selection screen goto Menu path Program->Execute->Background.

Need help with batch processing picture packages

Hi, I am having trouble batch processing picture packages is CS2. (Windows).
I have hundreds of images that need to be processed into picture packages and would love to find a speedier way to do this.
I know how to create an action. I know how to batch process from this action. I also know how to create picture packages, but I cannot get the final result I am after - please read on....
I have seperated all the images into their seperate folders for each style of picture package required.
I can create an action for the picture package required and then do a batch process on the particular folder, but this leaves all the picture packages open on the desktop - as when you chose the close and save in the batch process - this only closes and saves the original image - the picture package has been created as a new document and is on the desktop still open - named Picture Package 1, Picture Package 2 - etc etc.
I hope I am making some kind of sense here... (??!!)
What I would like to happen is that the picture package will be saved over the original file (or to a new folder) with the original file name of the original image or maybe even with an adjustment to file name (e.g - orignal file name sc1234.jpeg - new file name sc1234packA.jpeg)
So is this possible to do?? I'm thinking there must be a way.... i'm sure there are many group photographers out there who come across this everyday??
Otherwise I have to save each picture package manually to original file name (via searching though files to match the original image to the picture package....) Very time consuming.
Thanks for your help (in anticipation)...
Jodie

hmm - thanks for that - sounds like I will have to try and find some info and assistance regarding the scripting - it may be something I need to look into at a later time in the future....
At the moment though I will have to plod along with this method I guess!
Thanks for your assistance...
Jodie

Can I use Organizer to change the .jpg size of all photos in a folder in one batch process?

We're using wa-a-ay too much disk space for a growing photo collection. My daughter is a camera freak with four kids -- need I say more?
In my current test folder the sizes of the original photos range from 2.3 MB to 4.2 MB. I picked one photo at random and printed the original and then three more, saved by PSE9 as .jpg files at maximum, middle, and minimum quality settings on plain letter-size paper, and again on 4x6 photo paper. It takes a magnifying glass and a calibrated eyeball to detect a difference on the plain paper, and it's even more difficult on the photo paper. I think I should relieve the pressure on the hard drive's capacity by reducing everything to a more reasonable size; after all, the minimum-quality print takes up less than one percent of the disk space as does the maximum-quality print.
I have a hunch that I can accomplish this in a batch process with Organizer, but that's all I have is the hunch -- not the know-how. I would like someone to step me through the process.
I also expect a lecture on why I shouldn't do this. Go for it; I'll listen.
Thanks, Bud

Bud,
BudV a écrit:
I also expect a lecture on why I shouldn't do this. Go for it; I'll listen.
You are the one to judge... Will you regret it if you want to use some pictures with the original size and resolution at a later time?
Yes, you can use either the organizer or the 'process multiple files' command of the editor. But first you should think about two questions:
- Are you ready to backup the full resolution and size files before the 'shrinking'? External USB drives with big capacities are available and affordable.
- From what you are saying, the optimal size would be for files resized for 4" x 6" format at 300 ppi in jpeg quality 8 to 10.
Resizing from the Editor: Use the 'process multiple files' command and click the 'Same as source' button. I would not do it without a sound backup first... This can be done folder by folder.
Resizing from the Organizer : Use the 'Export' command. That command leaves the original and puts the resulting files in a new folder. The resulting files are NOT included in the catalog.This means that keeping your organization (categories, albums, tags...) will be tricky; same if you are using a folder organization system.
Another solution with a third party software such as Faststone photo resizer:
- Absolutely do a full backup before
- run the resizing options in the external software so that the files are resized without being moved. That replaces the originals.
- If you are using the organizer, your organization will be kept, but the file sizes in the catalog and thumbnail databases will be wrong. You can regenerate the thumbnail cache by deleting the thumbs.5.cache file in your catalog folder; it will be automatically rebuilt.
That has worked for me in the past... no guarantee for you!

Batch process crashes

Similar Messages

Maybe you are looking for