Batch Process For HDR Time Lapse?
Hi,
I'd like to batch process a sequence of 830 photos. I basically want to make two copies of each - one with less exposure (darker) and one with more (lighter) so at the end I'll have 2490 images (in separate projects). Incidentally, something I've noticed is that when selecting one photo for adjustments it automatically duplicates the photo alongside the original, I'd like to temporarily disable this so I can select all the photos in one project and adjust them as one so they all turn out the same. In case you haven't guessed already it's for an HDR time lapse film I'm making. I'll then be taking the images to photomatix for more processing - a whole other forum to visit then...
Any ideas?
Thanks.
Cecilstar wrote:
Hi,
I'd like to batch process a sequence of 830 photos. I basically want to make two copies of each - one with less exposure (darker) and one with more (lighter) so at the end I'll have 2490 images (in separate projects).
No reason I know this can't be done. Lift and stamp adjustment.
Incidentally, something I've noticed is that when selecting one photo for adjustments it automatically duplicates the photo alongside the original, I'd like to temporarily disable this so I can select all the photos in one project and adjust them as one so they all turn out the same.
Aperture→Prefs→Advanced→{uncheck "Create new versions when making adjustments"}.
In case you haven't guessed already it's for an HDR time lapse film I'm making. I'll then be taking the images to photomatix for more processing - a whole other forum to visit then...
What's the subject? I'd like to see the film.
Any ideas?
Thanks.
Similar Messages
-
HDR Time Lapse .mov flicker problems
Using Lightroom 2.3 trying to create an HDR Time Lapse .mov with quicktimepro. I have slight shutter adjustments (flickers) to correct in many images. I was unable to use manual exposure as time was an issue so auto exp. and manual focus was my only option. This was a scene over water of an amusement park and the waves are crashing, which I did not think of, so the ocean highlights created in camera slight speed adjustments...
Is there a way to match the sky exposure evenly in all the frames (240 of them) using an auto batch eye dropper action in Lightroom or PS3?
To add to my problem I have a single jpeg and need to convert to an HDR using Photomatix. I know raw would of been easier but was not thinking....
I have already tried to tweak each image seperately so I am half way there but still have flickers. Can anyone offer advice that won't take me all day.
Thanks for your help....
DavidThanks Sean,
I was hoping lightroom or PS3 could batch correct the exposures to match each other....Jao gave me "match total exposures" from the settings menu and this helped but still have to correct some by eye. You are right about the shutter drift. I used a Nikon D200 and that has issues. Looking to buy the D700 soon.
My other problem was the HDR conversion of a single Raw frame.....I am going to try and "match total exposures" before doing the HDR and see if that works.... -
How to stop the process for some time
I want to stop the process for some time can any one give the package or keyword or example for the same
For suppose two programs A and B.. .B will run based on output of A. What i need is... When A is executed the process will stop for 5mins then B has to execute...You can use signals with DBMS_ALERT to "wake up" a procedure.
Procedure A is something like this:
DBMS_ALERT.REGISTER('B_FINISHED');
do logic...
when finished - send a signal
DBMS_ALERT.SIGNAL('A_FINISHED','B you can start');
now wait until B is finished
DBMS_ALERT.WAITANY(...)
continue logic hereAnd Procedure B is
DBMS_ALERT.REGISTER('A_FINISHED');
wait for a to finish
DBMS_ALERT.WAITANY(...);
do logic...
when finished, signal A it can continue
DBMS_ALERT.SIGNAL('B_FINISHED','A can continue');This is useful if u they need to wait for each other within the code. if they just need to wait - call B from A.
Hope this helps.
Edited by: Pyrocks on Nov 8, 2010 8:50 AM -
Batch Processing for Workitem - Result Processing
Hi All,
I'm having problem in a workflow step.
When the workflow step is execuetd i'm getting a step log as:
Batch Processing for Workitem Dialog work item created 14.05.2009 09:09:59
user01 Execution started 18.05.2009 05:57:18
user01 Work Item Processing Complete 18.05.2009 06:04:46 Functionality for Hi 000600113419
user01 Terminating event received 18.05.2009 06:04:46 Functionality for Hi 000600113419
Batch Processing for Workitem Result Processing 18.05.2009 06:04:46
Can any one please let me know what code/program is executed in *Result Processing *I read this in the documentation:
If necessary, the G/L account can also be set so that the tax code is not a required entry when posting transactions not relevant to tax
How would I set this?? Or where is it done? -
How can I set the number of batch process for DTP globally?
Hi guys,
How can I set the number of batch process for DTP in system globally?
For eg. set the number to 1
Any hint is appriciated!
Regards,
LiyingHi,
In DTP screen also you can view batch settings. Check the Settings menu, you will find Batch.
Reg
Pra -
How to : only one user in a branch can do the batch process at a time ?
dear gurus,
In ADF web application, accessed by multiple branch (20), there is a
batch process to create invoices from orders. There are 3-5 users in a
branch. one user can process about 30 - 50 orders to become
invoices.
Business rule is : In one batch process, each users must produce
invoices with gapless invoice number. e.g : user_1 create 30 invoices
no.001 - 030, user_2 create 40 invoices no.031-070 ... and so on...
So we want to protect that at a time, in one branch, only one user can
do the batch process. User_2 must wait until user_1 is done to start
the process.
We use the table below to maintain the latest invoice number created :
CREATE TABLE doc_number
DOC_TYPE VARCHAR2(6 BYTE) NOT NULL,
BRANCH_CODE VARCHAR2(6 BYTE) NOT NULL,
DOC_NBR NUMBER(12) DEFAULT 0,
CONSTRAINT "DOC_NUMBER_PK" PRIMARY KEY (DOC_TYPE, BRANCH_CODE)
The question is :
I think of locking a spicific row of the doc_number table (select ...
for update wait 10) at the beginning of the batch process stored
procedure.
But what if the session/connection left orphan and the row is lockde
forever before the dba kill it ?
So is there a better approach to limit the user execution of the
process ?
Thank you very much for your help,
KristForget it. See http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:4343369880986.
However, if you are dead set on doing this old fashioned thing of trying to emulate paper invoices from a numbered tablet, you could always just let everyone generate all of their invoices with no invoice number whenever they want, then at some time ( say 21:00 every day), take a lock on the table and apply invoice numbers to all of the records with a null invoice number -- which will take only a few centiseconds at most. And let the users/system print only invoices that have numbers assigned. This way, you pretty much eliminate the concurrency issue of various branches generating invoices only in their time window -- yuk, what an awful way to have to do business.
And completely forget about users or branches having their own range of numbers. That is completely nuts. Your database already knows which branch owns which invoice, right?? -
Batch process for Web & Devices possible??
Hiya,
Here's what I have going on. I'm heavily involved with the DAZ3D community. Over a year ago I create a huge and I mean huge texture pack for the Windy Wizard Robe and the Morphing Fantasy Robe found at Renderosity. The pack, when zipped up is a whopping 333 Mb's. I was hoping to get that file size cut in half. I would do it one at a time but heck there are 151 texture maps in the pack. That's really not seeming like something I want to do if I can avoid it.
Is there a way to batch process using the Save for Web & Devices command?? It's settings are already set up to where I like them as I've completed a couple more packs and exported using that. It complains since the size of the texture maps are usually around 3000 X 3000 but it still works perfectly and it really does cut the size, actually, by about 2/3rds! Crazy but I really can't tell the difference when I compare a regularly saved map with one that's exported using that command. It's pretty amazing.
Thanks for the help!
Richard ;-)~Quality level is just the degree of compression. 12 is max quality (minimum compression). Depending on how media is viewed one might not tell the difference between level 10 and 5. Save for web uses the same dialog.
This also is same dialog you get if you "save as" in jpeg. Try a couple of different levels and see what the results are, and what satisfies your needs. -
Batch Process for creating button sets in Fireworks - help
Hi,
I'm new to Fireworks still, I've created some really simple
buttons and I was wondering if it's possible to do a batch process
on them to repeat a few steps e.g. changing background colour,
border colour, text colour etc... It would save me lots of time and
I could make some extra sets then.
Thanks,
RobActually Find and Replace will go through a directory as
well.
alex
PJR wrote:
> "sanchothefat" <[email protected]>
wrote in message
> news:ee8qm0$1pm$[email protected]..
> | Thanks Peter!
> |
> | You're a real hero, nice one
>
> Not sure about that! I'm struggling with this.
>
> I would set about this in a different fashion
>
> I would open a canvas say 600x600 and import all your
buttons onto the
> canvas.
> Organize them in a way that makes sense to you. You can
duplicate each set
> and alter the colours in several ways. In my example
>
http://www.fasterthanu.com/rob.html
I used Adjust Colour > Levels with just
> the backgrounds selected.
>
> Sorry I couldn't be more help
>
> Peter
>
> -
Batch processing for Enabling Usage Rights for Reader
Hello,
We have a lot of documents that we are converting to fillable pdfs using Acorbat 9 which will then be sent out via email to be filled by users. Since there are 50-100 different files, is there a way to use Batch Processing to enable usage rights to Reader for all those documents? Any help or advice is appreciated.
Thank you,
SamThere's no way with Acrobat. You can with Adobe's LiveCycle Reader Extensions product, but it's likely not worth it for just this.
George -
Batch process for setting document (language) and page (structure) properties
I'm looking for a batch process or script that will take a folder of PDFs and add some basic properties required by Section 508 (for accessibility) automagically--such as Document Properties where language=EnglishUS, and Page Properties Tab Order=Use Document Structure.
I'm not a programmer so any help is very much appreciated.
Thank you!
Marywell on unix/Linux/solaris there are no drives but storage heirarchy starts with a root directory represented with ' / '. and all files and directories are created in root directoy like
/usr/local/bin
/export/home/san
etc
also filesystem of unix consists iNodes rathar than FAT entries as in case of Windows.
some basic information is available at
http://www.techonthenet.com/unix/index.php
Regards -
How should a batch process for text alignment be configured in PDF
Hi,
Using Adobe Photoshop CS5 extended, how can I configure a batch process to align the text on about 700 single page pdfs (of text)? The text consists of four tables of numbers and one page number per page.
Thanks.Thanks. I didn't think so.
I thought it was a Photoshop question (since I know how to do it one page at a time manually in Photoshop) and I did post the question in the Photoshop Forum. Apparently it's not possible to batch the process in Photoshop, so someone moved the question to the Acrobat Forum. -
PE 5.0 Batch Processing for dust removal add on
I have PE Elements 5 and have scanned about 6000 slides (whew!) into my system. I have been using a dust removal add in provided by the scanner manufacturer (Konica Minolta DiMage Scan Dual IV) which has a slightly better capability than the caned one provided by Adobe. I would like to be able to batch process the slides for dust removal. Is this possible?
1. Is above possible at all?
Simple answer, No.
2. Does anyone know how to perform either of the 'Remove an Add-On' and/or 'Downgrade an Add-On'?
As far as I know is not possible... you'll have to restore from backup.
Regards
Juan -
Batch Processing for ACCRUAL documents
Hi All,
I am running into this error when processing a batch session for accruals t-code FBS1, it works fine for most accounts however this particular account stops the processing with an error.
G/L account 125010 requires a valid tax code
what can I check or fix that would be different about this account?I read this in the documentation:
If necessary, the G/L account can also be set so that the tax code is not a required entry when posting transactions not relevant to tax
How would I set this?? Or where is it done? -
GoPro stills for a time lapse in iMovie??
Hi,
I have about 400 photos that I took with my gopro on a timer and have a cool time lapse....if I can figure out how to do it.
I am using iMovie 10.0.2 and have the photos in my library. How do I put the clips into the movie so I can show them and the time lapse?
Thank you in advance.You need iMovie 06.
(it's a free download for iLife 08 owners)
http://www.apple.com/support/downloads/imovieHD6.html -
Correct project settings for Brinno time lapse cameras?
Hi,
I am totally new to all this so please forgive if an obvious answer. I have been doing a building project time lapse using some time lapse cameras by Brinno. They are the TLC200's (http://www.brinno.com/html/TLC200.html). I am about to start a new project to put together the final timelapse but have no idea what type project settings to start it as. They claim to record in 1280x720 HD and output a raw avi file of the time lapse sequence after filming (each frame i think is captured as jpeg). You pre set the number of frames it takes (eg 1 every 30 minutes like I have) and what frame rate it puts the sequence of individuale captures together and outputs to the avi file (I choose 10 fps). That is all the informatoin I have. Any ideas?
Many thanks
[I though I would also mention it is ultimately going to be around a 1min30s - 2 min video at the end to be posted on youtube.]First, you need to find out exactly what is inside your file
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen
shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/
Also... if your "raw avi file" uses the H.264 codec... it will not work
http://forums.adobe.com/thread/854115
Also... you mention jpeg... which may or may not work
MJPEG http://forums.adobe.com/thread/730396
Maybe you are looking for
-
Split of full pallets into multiple cases and each cases with SU num.
I have full pallets (SU managed) lying in the hibay. I have another storage type full case storage type with fixed bins always relplenished from hibay. Hence, I create a replenishment transfer order to fill the full case area.. we pick the full cases
-
TWhy must I erase iOS 4 , (restore) iPads 2 to move forward with updates? I don't understand this. Why such an inconvience?
-
Premiere Pro Exported Audio Problem
I'm using Premiere Pro to edit the videos I just shot and I used the DeNoiser effect to get rid of the background hissing from my mic. The problem is when I export the movies the first few seconds of each clip have the background hiss and then it goe
-
Trying to install my CS5 on my new computer and I am unable to find the serial#
I am trying to install my CS5 on my new computer and I am unable to find the serial #. I have all the serial #'s for the Photoshop Elements 10 & the Adobe Premium Elements 10. How can I find my serial # that I registered on my old computer?
-
Why is iChat disconnecting me after a while?
So I leave my computer for about 20 minutes...and iChat is disconnecting me. Is this normal? I couldn't see anything in the preferences to change this. Is there a way to fix this? I'm running Lion. Thanks