Batch process is started for DTP's-After Support package upgrate...

Dear All,
we upgraded with SP19 in our BI systems,
After patchs are completed when we run the dtp's either through process chain or normal triggering also dtp is shows still yellow for long time for all the cubes dtps...dso dtp....any dtps....
Message as follwos...
Extraction DataSource XXXXXXXX: 303 Data Records
Prepare for Extraction
Beginning extraction request REQU_D433FLO6MSZEOFHIR1SUOMBSP...
Extraction Completed
Waiting for free batch process...
Batch process started
then it is alwys shows yellow only even there is single records in Datasource...any help please...

Thanks for the quick reply!
We currently only have one of the notes implemented (1277550) and that one does not fix the problem, but it makes the yellow processes turn red (which is what it claims to do in the note description as well).
However, we have days where everything runs fine and we have days where we run into this issue. Therefore it is hard to test and before implementing this one additional note, I was curious whether there was anything else that you guys did to fix the problem. I am glad to hear that those two notes together should take care of the problem. We are implementing it right now.
Thank you!
Dennis

Similar Messages

Post Processing Steps after Support Package Stack Application

I'm curious if anyone has any guidelines for post processing steps (or pre-processing) when applying Support Package Stacks to their Development Infrastructure (Developmend Workplace and the Central NWDI Server). We have just upgraded a couple of developers local engines and developer studio to SP stack 19 from SP stack 14 and are experiencing some problems. We also applied the J2EE stack and appropriate SCA files to the NWDI server.
After the support packs it looks like our DTR files are gone (when reimporting configuration via Developer Studio the SC's are there but there are no DC's inside of them). Additionally, it looks like we have to manually reimport the newest versions of SAP_BUILDT, SAP_JTECHS, and SAP-JEE. Another thing is that old Local Web Dynpro DC's are now complaining about class path problems and different versions of files. We followed the documentation for applying SP19 exactly as the documentation says for a Java Development Usage type. Is there a checklist or something that anyone has for steps to perform after the application of the support packs?

I think I'm missing something. Now I see the code and DC's inside the DTR. However, when I try to import into NWDS no DC's come in (the software components exist, but no DC's in them). Additionally, the CBS web ui reports that my software components do not contain any DC's even though I see them in the DTR. What things can I look at to determine what I'm missing here?
Thought I'd add some more info..after applying the support packs, we imported the new SAPBUILD, SAP_JTECH, and SAP_jee SCA'S into our track as we required some functionality from the newer build SCA. We also reimported our old archives back into the system by manually checking them in assuming this would fix the problem with us not seeing the source in the NWDS or the DTR. After the import, the CBS no longer sees our custom DC's, but the DTR does (both in active and inactive ws). When importing the dev configuration into the NWDS our custom DC's no longer appear, but SAP's standard SCA's do.
Message was edited by:
Eric Vota

Error getting in useradmin after support package issue!!

Hi all ,
We have just upgraded our support package for Bi_JAVA and other.According to our BASIS guy the package installation is through.
But when i checked the portal-----user adminnistration , iam getting the below error.
500   Internal Server Error
Web Dynpro Container/SAP J2EE Engine/6.40
Failed to process request. Please contact your system administrator.
[Hide]
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
   java.lang.NoSuchMethodError: com.sap.tc.webdynpro.services.task.IRequestTask.isUsrLogoffRequest()Z
    at com.sap.portal.pb.PageBuilder.wdDoExit(PageBuilder.java:203)
    at com.sap.portal.pb.wdp.InternalPageBuilder.wdDoExit(InternalPageBuilder.java:169)
    at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doExit(DelegatingComponent.java:112)
    at com.sap.tc.webdynpro.progmodel.controller.Component.exitController(Component.java:255)
    at com.sap.tc.webdynpro.progmodel.controller.Controller.exit(Controller.java:154)
    ... 27 more
See full exception chain for details.
Correction Hints
The currently executed application, or one of the components it depends on, has been compiled against class file versions that are different from the ones that are available at runtime.
If the exception message indicates, that the modified class is part of the Web Dynpro Runtime (package com.sap.tc.webdynpro.*) then the running Web Dynpro Runtime is of a version that is not compatible with the Web Dynpro Designtime (Developer Studio or Component Build Server) which has been used to build + compile the application.

Hi
Check SAP Note : 869852
I think it UME is not correctly installed
After upgrading your system to a newer SP, you get one of the following
exceptions when executing the UME WD application:
o java.lang.NoSuchMethodError:
com.sap.security.core.wd.umeuifactory.wdp.I
ExternalUmeUiFactoryCompInterface.hasSimplePermission(Ljava/lang/St
ring;
Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/St
ring;Ljava/lang/String;)Z at
com.sap.security.core.wd.maintaingroup.MaintainGroupComp.afterModel
Init(MaintainGroupComp.java:787)
In order to avoid this error, perform following steps:
- Open the SDM tool and undeploy all components starting with
"tc/sec/ume/wd/..."
- Go to your downloaded SP archives and find the UMEADMIN*.SDA.
Redeploy it.
Regards
Krishna.

CRM 5.0 - Middleware issues after Support Package installation

Hi experts,
after upgrading the support package (from version 11 to version 17) we are facing a lot of issues.
1. We need to synchronize custom tables from CRM to R/3.
Can you give me an example on how to configure table SMOFQFIND/CRMMAPTAB for inbound queues CRI*?
We know we have to do but we don't know how.
2. We need to synchronize standard tables from R/3 to CRM.
Do you know we have to do some new configuration in SMOFQFIND/CRMMAPTAB table?
With the older version of SP we were'nt asked to configure those tables.
It has worked up to now
Thank you in advance
Emanuele

Hi,
We have the exact the same issue her using the 0DAT variable to restrict to the system date (in the filter process of the APD).
Did anyone resolve this issue?
Thanks,
Fabian

Error message ME006 order locked after support package

we went to a new support package this weekend and shortly after we have errors about locked documents error ME006
it is programm RVV50R10C
VL10X
I tried to change the number of tries from 100 to 1000 but had no effect ?
does anybody know how to resolve this ???
kind regards
arthur

Hi
Check SAP Note : 869852
I think it UME is not correctly installed
After upgrading your system to a newer SP, you get one of the following
exceptions when executing the UME WD application:
o java.lang.NoSuchMethodError:
com.sap.security.core.wd.umeuifactory.wdp.I
ExternalUmeUiFactoryCompInterface.hasSimplePermission(Ljava/lang/St
ring;
Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/St
ring;Ljava/lang/String;)Z at
com.sap.security.core.wd.maintaingroup.MaintainGroupComp.afterModel
Init(MaintainGroupComp.java:787)
In order to avoid this error, perform following steps:
- Open the SDM tool and undeploy all components starting with
"tc/sec/ume/wd/..."
- Go to your downloaded SP archives and find the UMEADMIN*.SDA.
Redeploy it.
Regards
Krishna.

Objects for deletion included in support package are not deleted

Hi experts,
How can i create a support package using Add-on Assembly Kit that deletes several objects?
This is the case:
We have DEV, QA and PROD systems. The objects are deleted on DEV and the transports are released. The transports are automatically imported on QA and the objects are deleted -checked they are gone. A support package of the product is created on QA including the transports that delete the objects. The SP is released successfully and imported on PROD successfully. The objects that should be deleted still exist on PROD. I've checked the logs for errors - no errors found.
Do you have any idea what could be the reason?
Best regards,
Petar

Note number 1581093.
As mentioned in the symptom. Version 2 of the note is created to extend the functionality provided in the Version 1. Version 3 of the note is created to correct the error in Version 2.
Information from SPAM
SAP_HR 600 0054 SAPKE60054 Human Resources
How can I find the information required if neeed?
WHen I try to reset the implementation I get the message
No correction instructions implemented for SAP
Note 0001581093
Edited by: Wojciech Walczak ITMAXI.COM on May 25, 2011 12:00 PM

Side effects in SAP BW after support package upload

Hello!
I would like to ask whether do You know any side effects executed by installing of a support package (18 and 19) in SAP BW 3.5. If so, should any preventive steps be taken before, to avoid those errors.
Many thanks
RW

Thank You for Your answer.
What I was looking for were all the activities, that are necessary before uploading of a new support package to avoid possible system errors afterwords. As I read on the forum, there are some errors following the SP upgrade like:
- user can not use some program variants any more
- customer exits show error messages, because some tables from the base are changed
- descriptions of new activities in IMG customizing are missing
etc.
Well it seems, that the only thing the user can do is to upload SP patches in the correct order and with an exeption of the last one released.
RW

Satellite E45t won't start for few hours after shut down

I have a brand new Satellite E45t-4100. After shutting down, I am not able to start the laptop for few hours. Upon pressing the power button, say after 15 minutes, power button LED lights up but nothing is displayed on the screen. I have disabled the sleep mode from power settings as I was facing the similar situation when trying to wake up the laptop from sleep. Although, when restart is chosen, laptop restarts without any trouble.
Please help.

Hello,
I have the exact same problem as the OP with an E45t-a4300. Purchased almost a year ago (Oct 30, 2013) from Best Buy. Worked perfectly for about 2 months after purchase and then this problem arose. Started when I'd put the computer to sleep, it wouldn't wake up. The computer would just shut off when I'd go to wake it up. When I'd hit the power button to restart, the fan would briefly spin, power indicator/wifi light turns on, then it shuts down again. I would repeat this cycle- sometimes only a few times, sometimes for almost an hour- before the Toshiba splash screen appeared with the "computer wasn't shut down properly" and the computer would restart and run the standard diagonostics. However, at first on a cold start or start from hibernation it would start fine but after awhile that stopped, too, and any starting attempt was met by the same non-start/shut down cycle.
This went on for about 3 months with me basically rarely shutting down the machine. I searched forums at the time and found nothing regarding this problem. Then one day in mid-March, the start-up problem miraculously disappeard- it fired right up. It started perfectly fine and worked with no problems whatsoever for 6 months, including waking from sleep and hibernation, until about 2 weeks ago. Now the same problem is back- it won't turn on with multiple start attempts and shuts down when you try to wake from sleep or hibernation- showing the "computer wasn't shut down properly" on the splash screen and going through the test process when if finally does start. Also, I'm now unable to enter the BIOS page on start up when pressing F2. I also have disabled rapid start, etc after the problem began.
I've owned quite a few laptops over the years (including Toshiba) and work with computer based systems for a living. I REALLY love this laptop a lot (yes, even with 8.1) but this problem is just disheartening. I truly appreciate any help.
Thanks!!

Install from scratch 3 times Mavericks but cannot used my restore it will just start for ever. After first install and restore mail and link between folder and files didn't work anymore. Now cant see my disk in finder. Help?

First install through regular update : never finishing the start after automatic restart
First install from scratch: erase through disk utility, install OS X Mavericks (using Recover mode), restart ok - Used Migration Assistant to restore applications and data only - Mail crashed each 5 inutes and asked constantly for password of my 2 accounts, links between folders and files not OK and attaching a doc was complicated. I downloaded the update same problems
Second install from scratch: erase through disk utility, install OS X Mavericks (using Recover mode), restart ok - Used Migration Assistant to restore applications and data only and settings : never finishing the start after automatic restart
Third install from scratch: erase through disk utility, install OS X Mavericks (using Recover mode), restart ok - But no disk available in Finder
So far no Mac since 3 days ...
Any help is welcome

Still struggling to understand why copying the entire root dir to a disk image and then restoring from that image did not, as expected, yield an identical system, and why I even had to reinstall after doing this.
Because there is a lot more going on under the hood than merely copying files.
The only way to do what you want is to use cloning software like Carbon Copy Cloner.
My advice is to rescue your personal files to a regular non-TimeMachine external drive, Zero erase the ENTIRE drive and install OS X fresh and update, then your programs from original sources and files from backup.
Then, make a bootable clone and you can copy that as many times as you want and each one is bootable.
Most commonly used backup methods
How to erase and install Snow Leopard 10.6

Firefox does not start for very long after clicking!!If another browser is opened Firefox opens after that.

Firefox does not open after clicking on the Firefox icon on my desktop. Occasionally it opens after a very long time and that also a number of pages open at the same time equal to the number of times hat I clicked the icon trying to open. If I open another browser like Google Chrome after trying to open Firefox then Firefox follows it to open much quicker after Google chrome opens.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
[[Image:FirefoxSafeMode|width=520]]<br><br>
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you.

How to manage automated batch processing with save for web?

Hi All,
This has been driving me insane. I am currently in PhotoshopCC and I know that several versions back I had no problems doing this but now I cannot create a generic action that I can then have save out to different folders.
What I used to be able to do and want to do again:
I have a project that requires me to turn a print magazine into a website quarterly. I receive the files packaged from InDesign and I want to process the images to specific sizes and then save as web optimized.
For each article I want to be able to select the source folder and then a unique folder to save to for each article, so that optimized images for each article remain with the article files.
I never had an issue doing this until a version or two back, since then I can only create an action that will save for web to whatever folder is in the action.
I resorted to using image processing scripts and never realized I was not resampleing the images down to 72 dpi and am having an attack of how could I be so stupid.
If anyone can direct me to creating an action that can accomplish the save for web with the ability to control what folder my files save to I'd really appreciate it.
Thanks,
Rose

http://russellbrown.com/scripts.html akk you need is the Image Processor Pro.jsx and Image Processor Pro.xml from his services install package just rename the file extension to Zip and extract its contents and copy the two files to your Photoshop's path presets\scripts\

Error in Solution Manager Optimizer after support packages

HI all,
after patching my SAP Solution Manager from SP18 to SP25, MOPZ doesn't work because there is this error in web page:
Error when processing your request
What has happened?
The URL http://<fqdn>:<port>/sap/bc/webdynpro/sap/wda_mopz_plan/ was not called due to an error.
Note
■The following error text was processed in the system SLM : CREATE OBJECT: The class \CLASS=/1WDA/L0STANDARD\CLASS=CL_LINK_CHOICE was not found.
■The error occurred on the application server srvslm_SLM_00 and in the work process 0 .
■The termination type was: RABAX_STATE
■The ABAP call stack was:
Method: CREATE_BY_VIEW_ELEMENT of program CL_WDR_VIEW_ELEMENT_ADAPTER===CP
I've found that web dynpro WDC_MOPZ_CORE has a syntax error if a try to generate it.
The error is:
Web Dynpro Comp. / Intf. WDC_MOPZ_CORE,Web Dynpro Component Controller COMPONENTCONTROLLER
Method ADJUST_XML
Method "ADJUST_STACK_XML" is unknown or PROTECTED or PRIVATE.
Here the ABAP codes:
method ADJUST_XML .
DATA lv_editable TYPE abap_bool.
wd_this->mo_controller->crm_adapter->is_editable(
IMPORTING ev_is_editable = lv_editable
CHECK lv_editable eq abap_true.
call method wd_this->mo_xml_manager->adjust_stack_xml.
endmethod.
There are no inactive objects as described in oss notes and I've tried to apply also notes 1548530 & 1485385 but with no luck.
Could you help me ?
Thanks
Maurizio Manera

Hello Mr Manera,
It is a known issue that the activating errors or issues with the objects in the common correction notes happen when the upgrade is done to SP23, notes applied, then upgrade again to SP25 or SP26.
The usual way to deal with this kind of error is running SPAU, letting the note go into an inconsistent state, then applying again the new version of the note. This may require to completely deimplement the common correction notes then implement them again.
Have you tried doing this?
Best regards,
Miguel Ariñ

Transports between systems after support package application

Hi gurus, we need to apply a lot of support packages into the development system and I wanna know if in the meantime we need to "freeze" all transports between systems.
This because the systems (DEV - QA - PRD) are in differente support package level. This until we apply the support packages into the others systems
Thanks in advance.
Ronald.

Yes, any transport which is taking SAP standard code from DEV to QA to PRD should not move if the systems in landscape are on different support pack level. Because it can happen that SAP has done some modification to that standard code in new support pack.
However, anything which is isolated Z-development (like some z-output report or smartforms) can proceed.
But, I suggest , stop moving transports until all systems have same support pack level.
G@urav.

PE 5.0 Batch Processing for dust removal add on

I have PE Elements 5 and have scanned about 6000 slides (whew!) into my system. I have been using a dust removal add in provided by the scanner manufacturer (Konica Minolta DiMage Scan Dual IV) which has a slightly better capability than the caned one provided by Adobe. I would like to be able to batch process the slides for dust removal. Is this possible?

1. Is above possible at all?
Simple answer, No.
2. Does anyone know how to perform either of the 'Remove an Add-On' and/or 'Downgrade an Add-On'?
As far as I know is not possible... you'll have to restore from backup.
Regards
Juan

How to Batch process a .jpg into multiple image sizes and colour modes

Hi,
I am needing to find an action or script that when run on a batch of Jpgs will open them up run a few actions and save them as 4 different files as follows
start file:
image.jpg
end result:
image_RGB_300dpi.jpg
image_RGB_72dpi.jpg
image_CMYK_300dpi.jpg
image_CMYK_72dpi.jpg
At present I have 4 separate actions set up do do this so I am running the batch process 4 times to get this result, is it possible to combine multiple actions into a single batch process?
thanks for any help on this one.

> At present I have 4 separate actions set up do do this so I am running the batch process 4 times to get this result, is it possible to combine multiple actions into a single batch process?
Record an action that calls the 4 actions?
-X
for photoshop scripting solutions of all sorts
contact: [email protected]

Batch process is started for DTP's-After Support package upgrate...

Similar Messages

Maybe you are looking for