Batch Processing, Security Removal

I am attempting to OCR large batches of documents with Adobe Acrobat 9. Some of the documents have security settings which make them un-editable. Is there any way to use a batch process to remove these settings?
Thanks!

To change "password security" to "none" in a sequence you need to set the appropriate preferences first to do that.
In 'Edit - Preferences ...' chose Batch processing and set Security Method to Password Security.
After that there will be a password request every time before you run a sequence, but now it's possible to run sequences with protected files.
Norbert

Similar Messages

Acrobat 9.4.4 crashes when running batch process to remove metadata

I am attempting to run a batch process to remove metadata from all documents within a folder. Only one or two documents will process before Acrobat crashes. Any suggestions?
Thank you.

There may be a corrupted video or image file on your iPad.
Try to download from the iPad using Image Capture instead and save the photos to a folder. If that succeeds, you can check the files for corruption before importing them to iPhoto.

Batch Process to Remove Blank Pages

Hello!
We are using Adobe Acrobat Pro 9 to scan in a bunch of double sided documents and OCR them to a specific folder. Most of the documents are double sided, some arent. What I would like to do is to leave the scanner on double sided to scan in all documents, what this does of course is on single page documents it will scan in a blank page on the "other" side.
Is there a way within Adobe Acrobat 9 pro to remove this blank pages, preferrably with Batch processing? I have tried to use the Preflight to and remove empty pages, but it didnt seem to work??? Should it? Anybody else have any experience with this?

Actually, PDF page content that is "empty" and a "blank" page (of the sort you describe) are not the same.
You may find that someone will have to view the 2-sided PDFs and, in the Pages panel, select all the blank pages and then delete them.
Be well...

URGENT, please help...Removing password security using Batch Processing

I have a few thousand PDFs which me and a team of colleagues have password protected but these now need the security removed. Is there anyway we can batch process the removal this security? I was thinking that if I added them to the watched folder and ran the batch process I've set up which has no security I may be asked for the password/ s (there are 5 passwords I used in total) and it could remove the password for those attached to that password and then I run the same for the other 4 passwords....any ideas at all would be really appreaciated.
Many Thanks
Claire

Two solutions come to my mind:
1. As i remember there is the option to run a batch-processing in Acrobat (Prof.). Maybe you can set up a new batch which removes the protection.
2.
Otherwise i have a programm (with a special pdf library) which could be adapted to do that. You can contact me for some details.
Regards,
ToM

Batch Security Removal Does Nothing

I am using Acrobat 9 and have a list of files our company needs to make editable by setting the security to "none".
The predefined batch sequence for removing security does not work. Creating a custom removal batch does not work.
After doing a search in the forums, I found a possible fix in Preferences by setting Batch Processing > Security Method: to "Password Security".
The above did not fix the problem. I run the sequence and all of my files are still secured. It acts like it is running correctly, but there is not change to the document.
Either I am doing something wrong, or this is a bug causing a feature to be inoperable in Acrobat 9.
"Is there a way to fix this inoperation?"
Thank you in advance for your help on this issue.

I found the issue. For some reason the setting for "Security" within the batch process had been changed from "None" to something else. Once I changed and saved the fixed version, it worked.
Thanks Bernd for causing me to relook at the settings!
Schneb

Can't batch process opening files with certicate encryption

Using Acrobat 9.0 pro.
I am unable to batch proces files that are certicate encrypted.
When batch processed a dialog message appears that reads;
Cannot open document
No files were processed
I have used the instructions that adobe has for using the associated digital id and ensuring this is logged in.
And also have set preferences for batch processing security method to certificate security, no password and, password security.
FYI: I Don't have livecycle so can't try this.
Can anyone help with a solution for doing this.
I was able to create certificate encrypted files using batch processing so can't understand why I now can't open and print file created this way, since
Acrobat help indicates this can be done.
Adobe instructions indicate this should work??? What's wrong here.
Thanks in advance
Regards,
smurphy

I may have to do with the name of the folder, such as having periods or slashes in the folder name.

How to remove existing OCR in batch processing?

I don't see that there is a way to remove existing OCR in batch processing. Could you please let me know if it is available somewhere, or it is indeed not available?

Bill@VT wrote:
It can be removed, but not easily. If you used clearscan your only choice is to print to another file, but that does not fix anything that got messed up. You can not really back out of the Clearscan format. This is one of the reasons the warnings are given about the permanent changes you are about to do. If you used searchable OCR, then you should be able to delete the text layer and then use save as to only retain the scans.
I think that you may misread my question. I know how to remove OCR for a single pdf with searchalbe image OCR option (examine pdf then remove hidden text). But I want to do so in "batch processing" as I have many pdf files need to be processed.

Process security headers without removing them

Does anyone know whether it is possible to have OSB process security headers without removing the headers from the message?
I would like to be able to validate the signature and grab the principal from the certificate in order to determine whether the request should be allowed to continue on. However, the signature cannot be removed from the message because the business service requires requests to be signed (and the requests must be signed by the original requester, not an intermediary).
See Process security headers without removing them also
Helmar

I don't know a way of doing this with OSB, I mean having the bus do it for you. It's either process all security headers or none. If the service bus is acting as a pass-through, not processing the headers, you could read them yourself inside the proxy pipeline. But you would have to implement the decryption yourself, this won't be done by the bus. You could do this with a java callout, but I imagine it won't be trivial task.
I'd think this is pretty standard. The headers normally are intended for a service (maybe going through various intermediaries), hence the actor property of the headers, and that service should remove them after processing them. But I'm not familiar with Oracle's ESB to know if this is possible with it.

PE 5.0 Batch Processing for dust removal add on

I have PE Elements 5 and have scanned about 6000 slides (whew!) into my system. I have been using a dust removal add in provided by the scanner manufacturer (Konica Minolta DiMage Scan Dual IV) which has a slightly better capability than the caned one provided by Adobe. I would like to be able to batch process the slides for dust removal. Is this possible?

1. Is above possible at all?
Simple answer, No.
2. Does anyone know how to perform either of the 'Remove an Add-On' and/or 'Downgrade an Add-On'?
As far as I know is not possible... you'll have to restore from backup.
Regards
Juan

Batch process watermarks or password security

Is there a way to batch process watermarks?
Is there a way to batch process a security password?
I want to either apply a watermark or set a security password to 100 photos that will be emailed. Surely this would not have to be done one at a time. I am new to this and haven't found the process.

You may want to checkout our products SecurSign, sever product for signing and StampPDF DE or StampPDF Batch (either a desktop or server)
http://www.appligent.com/secursign
http://www.appligent.com/stamppdf-de

Auto Red Eyes removal batch processing

Hi,
I know we have got the red eyes removal took into photoshop. Such tool needs a user manual action to work. We must clic on the eyes to make it work.
So its not possible to batch process pictures with red eyes.
I wonder as cameras have now built in red eyes removal and its possible to find a one button push red eyes removal at local photo stations.
Is there a plug in out there that can auto remove red eyes, so we could batch process red eyes photo ?
Is there any trick or pro grade plugin that could make that?

Photoshop Elements 9 has this capability. If I had to auto-red-eye more than a dozen images, that's the route I would take.
Of course, I'd probably flatten the psd, save a copy, have PSE9 do its thing, then load the 'fixed' image back in as a layer.
And I'd still take pass over the results to verify that the corrections look good.

How to add or remove silence at the beging and at end of each audio file using batch process

Hi all,
I am new to this forum. I have been using Audition 3 for the last couple of years and these days I have to coop with an extra difficult situation, which is; I have more than 2000 files that start and finish with a random length of silence, it varies 0 to 7 sec. My question is, how can I set the silent duration at the beginning and end of each file to a constant amount of 2 sec by using batch process?
Kind regards,
Pavlos

>it's relatively easy to select an absolute time at the beginning of a file (we discovered how to do this a while back), the same technique simply doesn't work at all at the end of it
Indeed! I had a few trials last couple of days and noticed it.
Definitely we need help on Audition's scripting language from the people in Adobe. Why don't they produce a scripting language documentation?!

Batch Processing Comment Summaries - auto removal blank page?

Good Morning,
I was hoping some one would be able to help me. I have folders of pdf's that contain multiple sticky notes. I was wanting to use the Advanced --> Document Processing --> Batch Processing --> Comment Summary Batch to put all information in the sticky notes onto a secondary page summarizing them. This works great!! However I need to keep the original pages and want (only if there is one) the comment summary to print on the next page. I do not want the page that says "no comment summary for this page" that also inserts. Is there a setting to turn that feature off while still providing the entire original document and the summarized comment pages? Otherwise that is a lot of time to go and delete that page out of thousands of documents.
Thank you so much,
Amanda

In the default php.ini is set open_basedir which limits work with php only to few directories (and directories bellow them). There is set /srv/http, /home,/tmp and /usr/share/pear by default.
To allow your vhost you should add /data/www or set empty value.

Batch Selective Song Removal?

I have more than 3,000 songs in iTunes. My 32 GB iPhone is nearly full to capacity. I want to remove all Christmas music from my iPhone 4 ONLY, but NOT change anything on my 64 GB iPodTouch 4, which still has lots of free space.
I know that it can be done, but the questions is CAN I DO IT AS A BATCH FUNCTION without having connect the iPhone, go through ALL 3,000 songs one by one, and check off the ones I want to keep on my iPhone? I'd even be happy if there were a Select ALL function, where I could REMOVE checkmarks rather than ADD checkmarks to the thousands of songs I want to keep on my iPhone!
I'm using iTunes 11.0.1.12 on Windows 7.

To change "password security" to "none" in a sequence you need to set the appropriate preferences first to do that.
In 'Edit - Preferences ...' chose Batch processing and set Security Method to Password Security.
After that there will be a password request every time before you run a sequence, but now it's possible to run sequences with protected files.
Norbert

Urgent help required : Batch processing error of an inbound idoc

hi,
i have a problem while posting an idoc to the GL(FB01).
i'm using an Inbound idoc message type : ACC_GL_POSTING
idoc type : ACC_GL_POSTING01.
Process code : BAPI.
In the transaction code OBA7 i have enabled a particular document type as BATCH INPUT ONLY.
i have set the option " Trigger by background program" in the partner profile (we20).
while testing the process i'm getting the error "Document type -- is only defined for batch input".
how can i overcome this error? can idocs be used to post for transaction that are batch enabled . plz help me.
with regards.
T.Jeyagopi.

Jeyagopi,
There are different types of Data loading into SAP.
BATCH INPUT / BDC / IDOC / BAPI etc. BATCH INPUT are standard programs that take the data and update SAP. I don't think that is same as batch processing of IDOC.
You might want to remove the setting of batch input, retain the batch processing in WE20 and try it out.
In my opinion it should work.
Regards,
Ravi
Note : Please reward points for the posts that help you.

Batch Processing, Security Removal

Similar Messages

Maybe you are looking for