Batch processing through bridge stopped working...

10 + years PS user... I Cloud user.... My batch processing hrough the bridge stopped working. Tried everything I know to get it working.
any ideas

We need to know a lot more to help you. Please provide answers to the questions listed here: "FAQ: What information should I provide when asking a question on this forum?"

Similar Messages

Office 2013: Windows host process (Rundll32) has stopped working

Hi,
I have problems with adding additional e-mail address to my Outlook. When I open the Mail Control Panel Item, go to my Exchange Profile and add a new e-mail address I get a popup indicating that the Windows host process (Rundll32) has stopped working.
The only way of adding extra e-mail addresses is to remove my entire Outlook Profile. In the initial wizard I can add all Exchange mailboxes that I need (I have 3). After I've configured my Outlook profile I always receive the Rundll32 error. When I try
to create a second Outlook profile I still get the same error.
I've tried the following:
- Repair OST file
- Repair Office -> Control Panel and Online Repair
- Reinstall Office
- Reinstall my entire PC
It doesn't matter which e-mail address I add in the initial Outlook configuration wizard. I always receive the error when I try to add a new mailbox, even when I add a mailbox that does not exist (e.g. [email protected]).
Even after reinstalling my PC I still get the same error. I'm using Windows 8.1 (x64) and Office 2013 (32-bit) on a Lenovo W540. None of my colleagues have this issue. It's a domain joined PC and we are not using Roaming Profiles.
For troubleshooting I also created a local account on my laptop but I get the same issues with this account.

Hi,
I'm also using Office 2013 32-bit and Windows 8.1 64-bit on my computer but doesn't get this issue. As you mentioned you reinstalled your PC, the first thing I suggest is to make sure your Windows and Office have been up to date.
The second thing is to make sure you are using the system with an administrator account, this ensures you the enough permission.
There is a possibility that some 3rd-party programs are interfering with "Mail", we can try to perform a clean boot to determine whether background programs are interfering with this:
1.Swipe in from the right edge of the screen, and then tap Search. Or, if you are using a mouse, point to the lower-right corner of the screen, and then click
Search.
2.Type msconfig in the search box, and then tap or click
msconfig.
3.On the Services tab of the System Configuration
dialog box, tap or click to select the Hide all Microsoft services
check box, and then tap or click Disable all.
4.On the Startup tab of the System Configuration
dialog box, tap or click Open Task Manager.
5.On the Startup tab in Task Manager, for each startup item, select the item and then click
Disable.
6.Close Task Manager.
7.On the Startup tab of the System Configuration
dialog box, tap or click OK, and then restart the computer.
If in clean boot the issue doesn't exist, the issue was probably caused by the 3rd-party programs. For further information to troubleshoot, you can refer to this kb below:
http://support.microsoft.com/kb/929135
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

No option to Batch Process in Bridge CS5

Usually in Bridge I would go to Tools> Photoshop> Batch. But instead I am seeing Tools> Process Collections in Photoshop.
Even if I go into photoshop to batch process via Bridge, the option for Bridge is greyed out and I can't select it.
I am on Windows 7, 64 bit.
Please help.

You sir, are a GENIUS! I salute you.

Host process rundll32 has stopped working while Installing BPC 7.5

Hi guys,
while installing BPC on Windows 2008 R2, the installation programs shows the message
Host process rundll32 has stopped working.
According to SAP Note 1498480 - Windows host process (Rundll32) has stopped working, i have followed the recommendations:
32bit Compatibility Mode ON
C:\inetpub\AdminScripts>cscript.exe adsutil.vbs set W3SVC/AppPools/Enable32BitAp
pOnWin64 "true"
Microsoft (R) Windows Script Host Version 5.8
Copyright (C) Microsoft Corporation. All rights reserved.
Enable32BitAppOnWin64 : (BOOLEAN) True
Also disabled the Data Execution Prevention (DEP) and rebooted server.
Then tried reinstalling IIS 7.0, rebooting the server, instaling it again but still showing the same error message.
Any futher help on this would be highly appreciated.
Regards!

After a few restarts it worked

Blackberry Bridge stop working on smart phone - curve 3 G

Blackberry Bridge stopped working suddenly on my smartphone and showing 'OFF' continusly with following message;
Failed to turn off MAP services.
Blackberry Bridge cannot start.Turn off unused serial port profiles under Bluetooth > Options and try again
Please guide me and solve my problem since,i am unable to use internet on my playbook.

Hi ppv64
I would suggest performing a backup of your BlackBerry® smartphone then reloading the software as shown in the article below:
KB11320 - How to perform a clean reload of the BlackBerry Device Software using BlackBerry Desktop M...
or
KB19915 - How to perform a clean reload of BlackBerry smartphone application software using BlackBer...
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Web Kit 2 Web Process,exe has stopped working?What is this and how do I get rid of it.

Web Kit 2 Web Process,exe has stopped working? What is this and how do I get rid of it.

I am not a Windows user but I have found several useful links for you here:
https://encrypted.google.com/search?q=WebKit2WebProcess.exe&as_qdr=all&newwindow =1&num=100

I keep getting a pop-up WEBKIT 2 WEB PROCESS.exe has stopped working and then I can't do anything -- any suggestions as to how I can get rid of this one?

I keep getting a pop-up WEBKIT 2 WEB PROCESS.exe has stopped working and then I can't do anything -- any suggestions as to how I can get rid of this one?
but i using safari on windows7.

Uninstall Safari and reinstall:
Safari 5.1.7 for Windows - Support - Apple
If this doesn't work, I suggest migrating to a different browser given that: Farewell Windows Safari, as Apple excludes its homegrown browser ...

Bridge Stops Working

After using Adobe Bridge CS5.1 successfully for a year with no problems, it no longer functions. It opens with "Bridge stopped working" and shuts down. Any suggestions on how to fix this?
Thanks

Hi
I'm getting the same or very similar problem.
Running CS5.1/5.5 Design Std on Win 7 64-bit on HP laptop. Bridge was working fine until I fired it up today (haven't used it in a while).
Now it crashes on open with the following error:
Problem Event Name: APPCRASH
Application Name: Bridge.exe
Application Version: 4.1.0.54
Application Timestamp: 4d6f26b3
Fault Module Name: AdobePDFL.dll
Fault Module Version: 9.9.0.11988
Fault Module Timestamp: 4cfe32fd
Exception Code: c0000005
Exception Offset: 00211adb
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Photoshop works fine.
Any ideas on how to solve or what's causing this?
Thx
c

Did anyones Logic 32bit bridge stop working?

Did anyones Logic 32bit bridge stop working?

Yes, everyones' does. It crashes several times a day. Click relaunch and it relaunches. Most of the times. Everybody who needs the bridge, hates the bridge.

Web Kit 2 Web Process,exe has stopped working?What is this ...

Web Kit 2 Web Process,exe has stopped working?What is this and how do I fix it

I am not a Windows user but I have found several useful links for you here:
https://encrypted.google.com/search?q=WebKit2WebProcess.exe&as_qdr=all&newwindow =1&num=100

"Host Process Rundll32 Has Stopped Working" on my new X200s

100% reproducible :
1. boot
2. log on
3. close lid
4. open lid
5. "Host Process Rundll32 Has Stopped Working"
I get this on my new X200s which is nearly in out-of-the-box condition. It runs Vista with SP1. I installed a few programs (Thunderbird, Chrome and OpenOffice) and configured it to do nothing when the lid closes.
I guess I'll try installing the Power Management driver update (http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-4GXPEG) and then Vista SP2.
Any other ideas ?
Thanks,
Jean-Louis

The driver update did not help.
In the meantime I noticed that the power gauge vanishes from the task bar after the error message.
J-L

Batch process Flatten Script not working?

Hi,
I used to run the this.flattenPages(); in Acrobat pro 8 with no problems, Scince ive installed 9 the batch process requires the enter button to be pressed every time it processes a file??? Is there a work around for this? Im not too good with Javascript, In Acrobat 8 I just had the one line and it worked fine?
Please help ive 80,000 files to process!
Thanks
Mike

Dont know if you have found a solution or not but you could use this as a work around.
http://www.autoitscript.com/autoit3/index.shtml
It is a free program that you can create scripts in if you created and ran an Autoit script that would have a
;******************** auto it script not javascript ************
$count = "1"
$total = "80001"
While( $count <= $total)
sleep(100)
winwait(_______x_______,_______y_________)
send("{ENTER}")
;sleep(100)
$count = $count + 1
WEnd
;****************** end auto it script ***********************
You will want to replace the _______x________ with the exact title of your message window that wants you to hit enter on. And the _________y________ with part of the text that is in the window that wants you to hit enter on.
What it does is loop 80000 times. While looping it waits for the window with the exact title / words in it once it see that it will hit enter, add one to count and do it again.
While running script if you want to stop the auto it program a blue A is on the lower right side of screen by system clock you can right click on it and end it.
This may help you get done with them while you are searching for a better built in answer.

Batch Processing using Bridge to PhotoShop

- I am using CS4 on a PC.
- I shoot RAW and from Bridge I go into Camera RAW and adjust my images.
- Usually I save each one at a time however I would like to learn how to be able to edit each photo using Bridge and Camera RAW ( I’m already doing this), then be able to take all of the photos in the directory and batch process to save as a tiff or jpg for further manipulation.
- I was using Canon’s DPP but want to do all my work in Adobe. The process in DPP is straightforward.
I'm sure this is simple but I can't seem to find it in the menu's or Help.
Thanks in advance for your help.

Curt:
Thank, this gave me the direction I needed. After a few tries I think I've got it down pat.
Thanks again.

Resume Batch Process After Action Stop

I have an action in Photoshop that includes two different stops to allow the user to make adjustments to the image. I would like to run this action on multiple files, but the whole batch process stops when the action stops.
How can I make Photoshop (and/or bridge) resume processing the remaining images after the user completes the adjustments?

Mike:
As you now know, this workflow cannot be automated due to the embedded STOPS:
* Open an image fle
* STOP
- Levels
- Mask
* STOP
- Tweak background
* Save as .psd
* Flatten
* Save as .jpg
* Close
* [repeat until all image files processe]
...but consider this possibility:
Open all (or some) candidate image files via Bridge, File > Open, Drag/Drop into PS Window. Then on each:
* Levels
* Mask
* Tweak background
* Minimize window when done
* Go onto the next open file
When all image windows minimized (signfying completion of tweaking), play a new action (e.g., "Save files") that would consist of two Automate > Batch steps:
* Batch step 1: play [new] action "Save as .psd"
Source: open images
- save files in .psd format in a folder of choice
* Batch step 2: play [new] action "Open .psd, flatten and save as .jpg"
Source: folder of just saved .psd files
- flatten each and save in .jpg format in a folder of choice
Kind of a bass ackwards approach, but once setup was complete it would offer a 1-click solution to batch saving the files in the format and folders desired.

Arrow buttons for shifting through tabs stop working

On my Linux Ubuntu system with Firefox 17.0.1 (and with several earlier releases, eg 12-16 I think) after a few weeks the tab triangle or arrowhead on one or more Firefox windows becomes defective. This problem is different from http://support.mozilla.org/en-US/questions/931515 in that if I restart the browser and resume the Firefox session the problem goes away for a while. (Note: I will wait until 05:00 UTC on 28 Dec before restarting FF to clear the current instance of the problem, in case anyone can suggest other relevant tests or data.)
The main symptoms are these: Triple click no longer slides the list of tabs all the way left or right. Double click appears to work once (from an extreme end). Single clicks step the tab list one tab at a time up to near an extreme end but then stop working before the extreme tab becomes visible. The following paragraphs give some more details about the symptoms.
When the problem occurs, tabs for new pages (eg reached by links from the right-most visible tab and opened in new tabs) do not become visible (that is, are not squeezed into the list on the tabs bar). The right-facing triangle, although not grayed out, does not make the tabs for the newly opened pages visible, but seems to have no effect. Clicking the X for the right-most visible tab closes that page and then one of the tabs that are "hidden out to the right" becomes visible, but other tabs out to the right remain inaccessible.
Meanwhile, the tab triangle arrowheads continue to work ok on other FF windows. For example, the left and right tab triangles in this current FF window (where 15 tabs are visible for 17 pages open in the window) are working fine. But in the FF window with the problem (where 15 tabs are visible for 40 pages open in the window) the triangles stop working one tab too soon: they don't give access to the leftmost or rightmost tab.
Note, clicking + (Open a new tab) jumped the list to the right end, with the new tab and an empty page visible; but after I clicked the left triangle three times, so that the new tab scrolled off to the right, no matter how many times I click the right triangle, that tab remains invisible, even though the webpage for it is still visible as the currently selected page. Opening a URL from command line acts the same way.
The system runs Linux 3.2.0-35-generic #55-Ubuntu 12.04.1 LTS x86_64 system with Firefox 17.0.1. I don't remember when I first encountered the problem but believe it was in 2011 (vs 2010) on a Fedora 7 system. Restarting FF has always cleared the problem. The command line "echo session $DESKTOP_SESSION desktop $XDG_CURRENT_DESKTOP; wmctrl -m" produces (in part)
session ubuntu-2d desktop Unity
Name: Metacity
"top" shows, in part:
PID PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
3033 20 0 2158m 1.1g 38m S 7 28.7 3878:21 firefox
Note, I snipped 1200 lines of text from the Troubleshooting Information because the 50000 bytes in it pushed this post's length over the 30000 byte limit. All of the snipped lines started with "print.tmp.printerfeatures"

Firefox left/right arrows are broken.
When you have multiple tabs open and you use the left and right arrows to scroll through your open tabs, they stop at a certain point, you then have to click the little, "List all tabs" icon in order to access one of your open tabs.
This is on a Windows 7 64-Bit OS. I've already followed all the instructions, still no good. This is Firefox version 19.0.2

Batch processing through bridge stopped working...

Similar Messages

Maybe you are looking for