Batch rename does not remove original filename
Bridge CS4 ver 3.0.0.464
Not sure what I am doing wrong but when I try to batch rename my files for some reason I cannot remove the origanal filename,
I have checked the preferences and searched for a solution and have come up with nothing.
Any help would be great. Thank you.
This has fixed the issue, however it is not really an ideal solution as it deletes all custom preferences, was there not a way to to reset just the renaming preferences?
Thank you anyway, I forgot about cntrl bridge!
Similar Messages
-
On CS5, how can I recover jpeg images that were Batch Renamed prior to removal from my flashcard?
On CS5, how can you recover JPEG images that were accidentally Batch Renamed prior to removal from a flash card? Is it a total lose or can they be saved somehow?
If they were renamed on the flash card that is a poor practice. If renamed in Bridge the old names can be recovered it you have checked "preserve original name in XMP". If not you are out of luck. But you still have the images correct?
-
Rule containing "Mark as Read" and "Move to Folder" does not remove New Mail Notification
I asked this question in another forum here (sorry for not linking, but the forum would not let me because my account is not yet verified):
http://answers.microsoft.com/en-us/office/forum/office_2013_release-outlook/rule-containing-mark-as-read-and-move-to-folder/061a8009-dd98-4304-81b0-6c4c8a5a6205
They passed the buck to this forum. Can anyone help? Here is my original post:
I have set up a rule so that emails from a certain sender should be marked as 'read' and routed to a certain folder. The rule works just fine except for the fact that it does not remove the new mail notification from the taskbar icon
or the system tray. The rule reads as follows:
Apply this rule after the message arrives
with New Home Sale in the subject
move it to the _New Home Sales folder
and mark it read
Once I open the _New Home Sales folder, all messages are marked as read, as they should be. When I open any of the emails in this folder, the notification goes away. It does not even have to be the most recent email or the same folder
- opening any email from any folder clears the notification, even if the same email was used to clear it before. Previewing does not remove the notification.
I have a similar rule set up for another folder:
Apply this rule after the message arrives
with New Home Final Sale in the subject
move it to the _New Home Final Sales folder
and mark it as read
The same thing happens here with the unread notification.
This is very annoying, as I want to receive these emails but I do not need to know every time one comes in.
Does anyone have any advice on this? I have read a few threads about an unread email bug, but I'm hoping I'm just missing a setting somewhere. I find it hard to believe such a bug would persist this long.Hi,
From your description, I would like to verify the Exchange version and Outlook version at first. Since I have a test in my environment using Exchange 2010 with Outlook 2010. I create a same inbox rule, it works and there is no new mail notification from
the taskbar.
What's more, I recommend you use Outlook safe mode to determine whether the problem is caused by add-ins.
If the issue persists, please install the Outlook latest Service Packs and check the result.
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support -
Uninstaller utility does not remove the installation from the registry
In our environment, we publish a script in Group Policy so that both the ActiveX and Plugin installs for flash player are easily installed for staff that have limited user access on their computers. I usually remove or replace the old MSI files from the path the above script installs from when I get new versions of Flash Player. For a while, I've run into a problem where when the new MSI files are installed, they try to uninstall the existing installation and fail because the old MSI file is no longer at the original installation source path. I've tried to remedy this by having the script use the uninstall_flash_player utility to manually remove the activex and plugin first, but this utility does not remove the installation details of each from the registry, and the subsequent installations of the MSI files fail. I have to uninstall the existing flash player installations first or perform a registry hack to formally remove the installation from Windows, and then the new installation will succeed.
Does anybody have any advice for making this process work better? Would this be considered a bug with the uninstaller tool?Hi, Until someone can reply to your thread/question, you may want to see this thread.
http://forums.adobe.com/thread/826773?tstart=0
eidnolb -
Batch processing does not work with action
Here is the thing. I have implementes several action on Photoshop. SOme of the include several sub actions and different saving locations. For example, I open a file, then I hit my prefered key combo for that action, and I have:
1) convert to cmyk
2)save copy as JPG with 11 quality level
3) save to folder A
4) image size to 72 dpi
5) covert to RGB
6) save as JPG 6 quality level
7) save to folder B
8) close file and discard cahnges.
Everything runs like heaven, but the moment I want to batch several files everything stalls.
I choose file > Batch > Choose my set > choose my action
Source > I choose where my files are (usually a PDF)
then I use "Supress file open options dialogs"
Destination> Since I already have set destinations y my actions, I choose here a "dump" folder
On errors > I hit Save As... and put a name for that log.
Then photohop opens my PDF on Photoshop and does nothing! It keeps my file open.
I m gettting frustated here, because I ma about to work with 400 files to batch, and this batch system does not work.
I am using CS6
Any cluesYour action doesn't to seem to include any Open actions. Why do you have the "Supress" option enabled?
Also, since your action has the two save commands, you would just leave the Destination set to None. Setting a Destination means that is going to save the files again.
The problem you'll run into though is that the action also saves the file name as part of the action, so that you'll end up just saving over the one file each time the action is played back on your 400 files. So Photoshop will process all the files, but each time it will overwrite the first file, so you'll end up with one file in each folder. Normally, in these situations, you'd use the Destination setting and use the "Overrride Action "Save As" Commands", which would substitute the Destination folder for whenever a Save command is used. The problem here is that you can only choose a single destination folder, so all files would be saved to the same location.
Short of scripting this, it may be best to break this into two separate actions. -
Hp C310 e all in one. Print that is stuck in the print queue, cancel does not remove
hp C310 e all in one. I have a print that is stuck in the print queue, cancel does not remove says deleting. I have tried shutting down printer, closing word doc, multiple canel all prints. Any Ideas
Hello mackice,
Try these steps below to clear the print queue. The steps are listed for Vista and Windows 7 and would be slightly different for XP. If you are using a Mac then the steps below would not work. Please advise what OS you are using.
Option 1)
1. Click on start orb
2. Type in search window: "services.msc" (without the quotes)
3. click ok
4. Scroll down to Printer spooler service and click on it in the right side window.
5. On the left side click stop the service and wait forthe process to stop
(Do not close the window yet. You will have to restart it here later.)
6. next delete the print job in the printer queue
7. then restart the spooler service
8. Resubmit your new print job.
Option 2)
If that doesn't clear it, the next step would be to stop the spooler
service as stated above
Go into windows explorer
(Print job data is collected and stored in a spool file in the spooler
folder.)
It is located in:
C:\WINDOWS\system32\spool\PRINTERS
Your print job will show 2 files there Example below:
00002.SHD
00002.SPL
Delete the files located in there. There may be several of them
depending apon how many print jobs you submitted. You will have to
resubmit your print jobs all over again.
Next go back to services window and restart the spooler service
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical. -
I received an iCloud backup notification on my ipad mini but tapping "OK" does not remove it and therefore I am unable to do any activity on my ipad mini. please help urgent.??
Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
-
I want to remove ''old History'' in the Location bar.
I am using Firefox 3.6.13.
"Clear recent history" does not remove the old History in the Location bar. And changing the setting to only show "History" does also not remove the old history.
Pressing "Delete" on single lines when opening the list by clicking the arrow to the right in the location bar, remove the entries temporary. But next time you type in the location bar, the same suggestions are there.See:
* [[Clearing Location bar history]]
* [[Cannot clear Location bar history]]
Entries in the location bar drop down list with a yellow (blue on Mac) star at the right end are bookmarks.<br />
You can remove such a bookmarked item that shows in the list if you open that url in a tab and click the yellow star in the location bar.<br />
This will open the "Edit This Bookmark" dialog and you can click the Remove button to remove the bookmark if you want to remove such a bookmarked entry. -
why can't i empty my trash bin? it prompts me to dele ''all locked items'' or ''unlocked items''...when i click delete ''all''...it runs up to a total of approx 29000 items, yet it does not remove it securely or at all! I am running OS X YOSEMITE
Trash – Empty When File is Locked or in Use
Try holding down the option button while trying to delete the Trash. If that doesn’t work, here is some more information.
Trash FAQ
Trash Permission Error
Trash Permission Error (2)
Trash Permission Error (3) -
ERROR: local PSE does not match original in database
Hi Exports,
I have problem with SSO configuration,
The error message is :
Own System Data
SAP System ECC Client 000
Profile Parameters login/accept_sso2_ticket = 1
Logon Tickets Are Accepted
Certificate List
The Certificate List Is Used To Verify the Digital Signature for the Logon Ticket
H:\usr\sap\ECC\DVEBMGS01\sec\SAPSYS.pse
Owner CN=X85
Issuer CN=X85
Serial Number 00
Owner CN=SSO, O=sapmarkets, C=US
Issuer CN=SSO, O=sapmarkets, C=US
Serial Number 00
Owner CN=DSZ, OU=IDES, O=mySAP.com Workplace, C=DE
Issuer CN=DSZ, OU=IDES, O=mySAP.com Workplace, C=DE
Serial Number 00
Owner CN=ID3
Issuer CN=ID3
Serial Number 00
Owner CN=IDES Workplace Center, OU=IDES, OU=SAP AG, O=mySAP.com Workplace, C=DE
Issuer CN=IDES Workplace Center, OU=IDES, OU=SAP AG, O=mySAP.com Workplace, C=DE
Serial Number 00
Owner CN=JE3
Issuer CN=JE3
Serial Number 00
Owner CN=E6T
Issuer CN=E6T
Serial Number 00
Owner CN=BI7
Issuer CN=BI7
Serial Number 20090820201039
This Is the Certificate of the Issuing System for Logon Tickets
Owner OU=J2EE, CN=BI7
Issuer OU=J2EE, CN=BI7
Serial Number 00
Owner CN=US01
Issuer CN=US01
Serial Number 00
Owner CN=EP7, O=SAP Training
Issuer CN=EP7, O=SAP Training
Serial Number EBB24ECD
Owner CN=CORPORATEPORTAL
Issuer CN=CORPORATEPORTAL
Owner CN=IDES Portal 5.0
Issuer CN=IDES Portal 5.0
Serial Number 00
Owner CN=HR Vertrieb demoportal
Issuer CN=HR Vertrieb demoportal
Serial Number 00
Owner CN=SAPUK ZE6 Sales Portal Demo
Issuer CN=SAPUK ZE6 Sales Portal Demo
Serial Number 00
Owner CN=GFI Demo- & Technology-Center
Issuer CN=GFI Demo- & Technology-Center
Serial Number 00
Owner CN=HR Vertrieb demoportal productiv
Issuer CN=HR Vertrieb demoportal productiv
Serial Number 00
Owner CN=SP4C, OU=SAP Training, O=SAP
Issuer CN=SP4C, OU=SAP Training, O=SAP
Serial Number 00
Owner CN=Portal, OU=IBSDI, O=SAP-AG, C=DE
Issuer CN=Portal, OU=IBSDI, O=SAP-AG, C=DE
Serial Number 00
Owner CN=EP50, OU=Solution Centre productive, O=CRM GBU, C=DE
Issuer CN=EP50, OU=Solution Centre productive, O=CRM GBU, C=DE
Serial Number 00
Owner CN=EP6, OU=SPS, OU=SAP, O=SAP Trust Community, C=DE
Issuer CN=EP6, OU=SPS, OU=SAP, O=SAP Trust Community, C=DE
Serial Number 00
Owner CN=E6T, OU=Training, OU=SAP, O=SAP Trust Community, C=DE
Issuer CN=E6T, OU=Training, OU=SAP, O=SAP Trust Community, C=DE
Serial Number 00
Owner CN=EP6, OU=PortalPlatformTeam, OU=EnterprisePortal, O=SAP Trust Community, C=DE
Issuer CN=EP6, OU=PortalPlatformTeam, OU=EnterprisePortal, O=SAP Trust Community, C=DE
Serial Number 00
Systems for Which ECC Accepts Verified Logon Tickets
The Access Control List Defines Which Systems the Verified Logon Tickets Are Accepted From
Table TWPSSO2ACL
SAP System BI7 Client 000
Owner OU=J2EE, CN=BI7
Issuer OU=J2EE, CN=BI7
Serial Number 00
SAP System BI7 Client 001
Owner CN=BI7
Issuer CN=BI7
Serial Number 20090820201039
This Is the Certificate of the Issuing System for Logon Tickets
SAP System ECC Client 000
Owner CN=ID3
Issuer CN=ID3
Serial Number 00
SAP System ECC Client 001
Owner OU=J2EE, CN=BI7
Issuer OU=J2EE, CN=BI7
Serial Number 00
Application server PSE:
ID: CN=ID3
Namespace:
Profiles: H:\usr\sap\ECC\DVEBMGS01\sec\SAPSYS.pse
OK: file available, length: 15.455
ERROR: local PSE does not match original in database.
Kindly help me to solve this problem.
Thanks
Jibin.Sure. Tried two ways:
a)
1. Delete existing System-PSE
2. Import SAPSYS.PSE
3. System-PSE remains empty (red x)
Leaving STRUST and calling it again: No System-PSE
b)
1. Create new System-PSE ok - everything is in place
2. Import needed SAPSYS.PSE
3. Certificate field is populated with that data
Leaving STRUST and calling it again: The imported SAPSYS.PSE data is gone and System-PSE is coming up with newly created certificate data
Example:
1. Create New
Inhaber CN=SID
Aussteller CN=SID
Seriennummer 20131211053554
Gültig von 11.12.2013 05:35:54 bis 01.01.2038 00:00:01
Prüfsumme BE:7D:67:FE:7F:F6:8B:85:C5:63:BF:BC:74:BE:7D:4D:67:FE
2. After Import
Inhaber CN=SID
Aussteller CN=SID
Seriennummer 00
Gültig von 01.10.1997 00:00:00 bis 01.01.2038 00:00:00
Prüfsumme 8E:0F:BC:54:98:5D:02:84:CB:F0:BE:7D:4D:67:32:80:62:CD
3. Leaving STRUST and re-entering
Inhaber CN=SID
Aussteller CN=SID
Seriennummer 20131211053554
Gültig von 11.12.2013 05:35:54 bis 01.01.2038 00:00:01
Prüfsumme BE:7D:67:FE:7F:F6:8B:85:C5:63:BF:BC:74:BE:7D:4D:67:FE
Saving the PSE leads to an export to file dialog...
Distributing doesn't help either -
The spot remover tool does not remove the selected item
When I use spot remover and click on the item I want to remove it hightlights it but does not remove the item
Is your Opacity set to 100%?
If you press the "H" key does it show where it is getting the replacement from? -
Updating F_BKPF_KOA does not remove SOD Issues
Hi,
We have recently installed GRC 5.3 and are currently working through SOD issues located in some roles, however we have found that trying to restrict a Function in the Rule Set does not remove the SOD Issue:
Example:
We have created and AP Processing Role and based upon the Standard Rule Set FB02 is causing an SOD issue with itself.
Functions AP02 and GL01 are being called, I have enabled F_BKPF_KOA, ACTVT 01,02 and KOART S in the GL01 function (authorisation for KOART - S not present on the AP Processing Role), this has been saved and the Rules updated, yet the issue persists.
Any advice???
Thanks
CraigCraig,
i got it.
things are working perfectly as designed.
now let me explain how RAR do analysis.
it will pull Role Data and Rules data (enabled one only) and then do comparison one by one.
first it will check for relevant tcode (we are doing persmission level analysis)
then it will compare all objects in role with object in that rule (in your case it is 02907N01)
then field values will be compared
IF FIELD VALUES IN RULES EXIST IN ROLE ALSO, THEN IT IS CONFLICT
hope you get my point.
now in your case.... you are trying that if you disable ACTVT 03 , the conflict should not show.
sorry you are going wrong way...
now your rules say if any user have ACTVT 01 OR 02, then it should show conflict.
and yes ROLES do satisfy that.
remove 02 and 01 from role only then it will not show conflict.
tried my best to explain
please let me know ........
regards,
Surpreet -
"netcfg2 -a" does not remove "/var/run/daemons/net-profiles"
hello!
i have found out, that a "netcgf2 -a" does not remove /var/run/daemons/net-profiles. after that i have to stop the net-profiles daemon by hand. i connect to networks with "netcfg2 <profile>", the net-profiles daemon will be started automatically by that command.
is this an issue?
another problem i have is, that netcfg2 even cannot connect to a network automatically, if i have two networks with the same beginning:
for example: network a: foo; network b: foobar - when i want to connect to "foo" it uses the "foobar" profile, because the name of the profile file is listed before the name of the file from network a.
bye iggyThe first thing: I thing netcfg2 should not touch anything in /var/run/daemons, since that's the job of scripts in /etc/rc.d/* It's the same for any daemon you run - if you kill it manually, not using /etc/rc.d/<whatever> stop, then you have to clean up /var/run/daemons/<whatever> yourself as well.
before connecting with netcfg2 there is no "net-profiles" in /var/run/daemons. after netcfg2 <profile> it is. after "netcfg2 -a" the file is still there, so it indicates net-profiles-daemon is still running.
Last edited by iggy (2008-05-06 13:52:28) -
How can i disable the 'top sites' cleaning history does not remove this and it is confusing and a risk to privacy.
It also serves no purpose as sites i want to keep are bookmarked
Is there an alternatively an addon for thisHi there - nope, this doesnt work either. the options available when I tap and hol are only OPEN IN NEW TAB, SHARE, ADD TO HOME SCREEN
wayne -
Reboot does not remove previous version - how rmove uninstalled version completely
reboot does not remove prior firefox, which was uninstalled - cannot run new install due to vestiges of earlier version detected - reboot required to remove, yet removal never complete, so never able to run new install. please provide diagnostic detect & remove for any firefox items left on system
You can try using this tool to remove all traces of previous version(s) of Reader:
http://labs.adobe.com/downloads/acrobatcleaner.html
It may be better to remove all versions of Reader, and then download the offline Reader installer from
http://get.adobe.com/reader/enterprise/
After downloading, restart your computer and run the installer before doing anything else.
Maybe you are looking for
-
Questions on Xontrol--How to update the state and data
Hello, everyone. I am new to use the XControl. I don't understand how the program in the facade update the "state" and "Data" after we click the button. I cannot do that, please give me some help on the XControl. My vi is in the attachment. Message E
-
How do my wife and I both share photos from our iphones to one mac via clouds photostream?
My wife and I have seperate apple store id's, and we have one main mac desktop updated with lion and icloud. when I take photos on my iphone 4 it synchs and shows up via photostream to my mac desktop. When she takes a photo using her phone, it doesn'
-
No default search folders in Outlook 2010
Hi there, I joined a new company and we use Exchange 2010 SP3 UR6 with Outlook 2010. All users are using Online-Mode, nothing cached. Nobody has the default search folders. I ran outlook with /cleanfinders /resetfolders, nothing. It's not vital of co
-
Hai I am very new to Flex. I am trying to connect Flex to remote SQL server database. I have seen few blogs but getting confused. Can someone post an example to connect to remote SQL server database, get the data to xml and populate datagrid/list fro
-
Turn off phone without turning off GPS?
I hope you can help with a query. Is there any way I can turn off the phone on the iPhone 4 without also turning off the GPS? I'd like to be able to run with Runkeeper app on but without the distraction, battery drain and radiation of the phone. I un