Batch rename question

Hi,
I need some help with a non-standard batch rename. I have a series of images that look like the following:
M5200101
M5200102
M5200201
M5200202
The files are named based on a fish tag # and a 2 digit sequence (last 2 digits and they go from 01 to 12 typically but it can vary. The problem is that I need to add an underscore between the tag number and the last 2 digits. (E.g. M52001_01 etc.) Does anyone have a solution to this? Prefereably freeware?!
Thanks!

If you're running a 32 bit version of windows try Batch Rename
A really great piece of freeware that is easy to use.
There are also options within PS's batch dialog that allow you to do the same thing, but I find the above app so much easier.
I really miss it on my Vista 64 box...

Similar Messages

Big Big batch rename question

Hi folks. I've seen a few batch rename questions before, but I think this one's a little different.
I have a long (8 minute) movie, one big piece in a FCP timeline. For reasons unimportant to this question, I need to break it up into about 50 little 10 second movies. I can do that easily but using the cutting tool and cut cut cut away until I've split my one item in the timeline into 50 pieces. I can then drag them into a bin. Of course, each one is called "final" (that's the name of the movie). I can select all those clips and make them independent clips, which now allows me to rename them.
Problem is, they need to be renamed to a bunch of unrelated words. ie "plane", "building", "sky" etc. So a simple batch sequence that names them 1, 2 ,3 is not what I'm after.
I have an exel file with a single column that lists all these names in their proper order. So far, I have successfully:
exported a batch list from my 50 clips in the bin that are named the same.
replaced the file names in that batch list with the names from my column of names
reimported that revised batch list into FCP. Their properties are all correct, ie the right name is with the right in and out points etc.
I'm stuck now where those clips have a red line through them. How can I relink the 50 clips in the timeline (which are all still called "final") with their properly named counterparts in the bin?
batch capture of course isn't a solution since there's nothing to capture.
Hope that's clear and thanks in advance for any ideas.
B

If you're running a 32 bit version of windows try Batch Rename
A really great piece of freeware that is easy to use.
There are also options within PS's batch dialog that allow you to do the same thing, but I find the above app so much easier.
I really miss it on my Vista 64 box...

Batch file renaming questions

Beyond knowing that such a facility exists, I have no knowledge about Bridge scripting. Can it be used to modify the standard batch file rename process in Bridge?
I would like to rename my Canon Raw images with the date (from EXIF Date Digitised) and a sequence number that resets to zero for each new date. This sequence number should accurately reflect the order in which the images were taken (via the time component of EXIF Date Digitised). I would also like to process all files in a subdirectory structure at the same time.
The standard Bridge batch rename process does not offer a counter that resets for each new date, nor does it seem to allow processing files in more than one folder at a time.
Can this be done? Do such scripts already exist? Alternatively, are there any commercial software utilities that can do this? I am already aware of a freeware solution called DIM but am a little worried about putting my faith in something with no guaranteed ongoing support - a concern that would be addressed by a script I can control myself or a properly supported commercial solution.

Hello? Hello? Is there anyone there?
Have I posted this question in the wrong forum or is everyone on vacation?

Browser batch rename command question.

PS7 - OS 10.4.11 - 1.33 Ghz PowerPC G4
I was looking at a folder of images using the browser and selected a number of them - some of these images had previously had changes made to them and then saved as JPEGs, some had not been worked at all since downloading from the camera to the HD.
Wanting to group them by title, I used the batch rename command, by Control-clicking on the selected images, to rename them in the same folder with Mac OS9 compatibility (I couldnt find a Mac OSX compatibility even though that is my system). This was the first time I have used the batch rename command, and assumed it would merely change the file name.
I then tried to open the files after this process. Those images that had previously been worked and saved as JPEGs are referred to as Document in the Finder, rather than as Adobe Photoshop JPEG. When trying to open them, I got a message:-
The document Louvre1 could not be opened. ColorSync cannot open files of this sort.
The only way I have found to view them is to use Open with Safari command.
Those images that had not been worked are referred to as Unix Executable File in the Finder. I cannot view these at all, not even with the Open with Safari command.
Any comments, please? What am I missing? I did not expect the process to so radically change the files. I can use Grab to get an image of those files that can be opened in Safari, although presumably they will not be so detailed as the originals.
And those images that cannot be opened at all, even in Safari:- Can I get them back as PS JPEGs, or in any viewable form?
Any help gratefully received.
Thanks,
Graham

When you renamed the files, did you remember to include the ".jpg" extension at the end of each file name? If not, add it now.
And make sure you are running Ps 7.0.1. It's a free and mandatory update (numerous bug fixes).

Question on Batch Renaming in pse2

in my work for a local newspaper I have to name each file with a four digit serial number. This is no problem with pse3 which I have on my desktop computer.
However on my old laptop running windows m.e. pse3 wouldnt load,so I loaded an old copy of pse2 which came bundled with a film scanner. It worked fine except when batch renaming .There is a 4digit serial number option but I cannot see any way of setting the start number,so it always starts 0001. Is there no way of setting this on pse2?
Norman

Juergen,
thank you very much for your suggestion.I was able to download and run irfanview in my stone age laptop and it has a much better renaming facility than pse2&3(the only ones I have used)
Incidently in pse3 there is a box to set the start no. in batch renaming,but not in pse2 which to me ,makes the 4digit serial option rather pointless unless you really want to rename over 1000 files in one go.
Thank you again, Norman

Batch rename, name changes after frame 99

Hi, I put a folder into bridge to do a batch rename and called the text MILAN/SYRIA and gave for first number 00.
After frame 99 the name changed to a weird Adobe Bridge Batch Rename Temp 10037
Which you can see better in the RAW windows, the 99 and the following one.
Photoshop doesn't like to open a name like that, can't blame her.
of course I strongly suppose that I should have given 3 digits in Batch rename, and l am looking for your confirmation, and while I am here
why was my card full at 0485 pictures when a folder I think takes as many as 9999, how do you finish a folder if your card is full?
i suppose you change card and you keep going with the same folder? Sorry about the camera question, couldn't keep it, thanks dona

no,no, i started with 00 two digits only, batch rename changed to 623 after i put the folder back in just in order to take the screenshot, i dont know why but that always happens if i put the folder back in after usage, but i do know for life now that if I am going to take over 100 shots, which is most of the time, i should start with 001 or 000.
See, this is the first number that was given to the first file, 01,WHICH actually became 00, i don't have it here.
So it rest to know where is "Preserve file name " in current metadata, and would that make it possible to revert to the original CR2 number?
Why not to change name straight from the new name? thanks

Batch rename with minimum numeber of digits in sequence number

I'm pretty sure I remember this working how I wanted in previous versions of Bridge, but at least since cs4, it has not worked as I would like. I've tried searching for an answer or a setting that I'm missing, but have come back empty-handed.
Here's my situation. Let's say I'm renaming 18 files. Each file has a sequence number. I want the sequence numeber for the first 9 to be one digit, and for the second nine to be 2 digits.
i.e. image_1.jpg, image_2.jgp, image_3.jpg...image_10.jpg, image_11.jpg...
The best way I've found that I can do this is to select all 18 images, and assign a 2-digit sequence number. Then, once that is complete, select the first 9 and repeat, but with a 1 digit number.
In the past, I could select all 18 images, and choose a 1 digit number, and after 9, it would switch to 10, instead of going back to zero. Is there still a way to do that? I know it's only one extra step, but that one extra step is actually kind of two, because each time I have to reset tho starting number back to 1 or 10, and switch the setting from 2-digits to 1-digit and back again. And I usually have to rename multiple groups of files at once, so it does add up. Granted, much better than renaming one at a time, but not as convenient as I feel it could be, and as it once was.
Am I missing something?
Thanks,
iLan

While I certainly can understand the way in which computers work, I also understand that in a program as complex as any of the components in Adobe's Creative Suite, there is most certainly a way to override the computer's numerical logic so that it can remove the initial "0" from a 2-digit number. Granted, that may not be possible in the current version of Bridge, theoretically it is "Possible". And I'm quite sure it functioned that way in previous versions, although I really don't know which version I was using when it worked that way. Maybe cs2?
As a developer, the whole reason for this question is to avoid having to create extra code in my applications to add an unnecessary "0" to digits 0-9 in any filenames of any files I want to load. Although it looks as though adobe changed the default behavior of the batch rename function, and removed (or in some peoples' minds improved) some functionality without an option to get it back.
Unfortunately for me anyways...
Thanks for the help,
ilan

Batch Rename with additional "."s, drops the file extension. Request for "Keep File Extension" option...

I NEVER name files with extra "." s in the name. I realize that all OS's (even Windows) will recognize it, but I haven't gotten out the old mindset of 8.3 filenaming... Although I do use longer names. So... I was surprised to see that when I was renaming files as per a clients naming preference to add a period within the name, the file extension is removed.
For example:
original file - 2014_10_31_1643.CR2 when batch renaming to "2014.31" + sequence, drops the "CR2" extension.
but.... if I change it to "2014_31" + sequence, the ".CR2" remains
Since adding multiple "." is a legitimate naming convention, shouldn't the file extension remain? Or, possibly this could be made more flexible by adding a check box "Keep file extension"
just a thought.

Refer to this stackexchange article:
http://apple.stackexchange.com/questions/47319/how-can-i-make-os-x-recognize-new -file-extensions
The finder will only select the filename only for "known" file types.

Batch rename selected layers

I'm trying to find a script that can help batch rename/renumber a group of selected layers.
So far I've been able to find a script that renames every single layer in a Photoshop document (overkill). Or there's the CS6 Tab rename trick (too slow).
I routintely export PSDs from Illustrator for use in After Effects. But in Photoshop, I'll get a couple hundred layers named <path> or <path> + <path> or <group>. Renaming by hand is out of the question. But I don't want to rename every layer the same.
Any suggestions?

I wrote one for you here...
http://www.retouchpro.com/forums/photoshop-scripting/23234-script-find-replace-text-layer- names.html

Batch rename masters and versions

Like a dummy, I imported a huge photo shoot without using the easy re-naming.
Now, I want to rename every photo. I want to keep the numerical order, as it is critical for organizing the project photos. I want the Masters to be renamed (and I assume then that the versions just stay "version1" etc...). I have all my photos in stacks by master and version (not different masters).
How can I batch rename, keeping the sequential order that is already there.
(I have read the manual. I have searched on this forum. I still am a little unclear and, hence, the question.)
Thanks in advance!

If the images are referenced to an external location (outside Aperture's Library) then you can easily renaming them using Automator.
Copy all the images you are going to rename to a temp location. Just in case something goes wrong.
With Aperture closed open Automator, in the finder select all the images you need to rename and drag them to the right part of automator's screen. Now on the very left part select Finder, on the second column, near the bottom drag the rename finder items action to the right part, just under the window with all your images listed. Click on don't add so it will just rename the files (you made a copy previously). Select replace text and enter the old and new text. That way it will keep the numerical part of your files.
Press play and wait for the action to finish.
Check in the finder that the files have been renamed properly.
Open Aperture and go to the project with those images. If the masters can't be found go to File/Manage Referenced files... and in there you can reconnect to the right location. Usually this step won't be needed unless you move the masters to a new location.

Batch Rename... how do I keep the version number [NOT the version name]?

Hi!
I've finally made up my mind about renaming my img. names in Aperture, and I would like to have something like "Travel San Francisco 2005 version x 1.CR2", where "version x" is the number which Aperture automatically adds whenever I make a change to an image. This is then followed by a number which automatically increases by one for every new image: 1, 2, 3, 4... etc. until there are no more images to choose from in the current project.
My problem is that I cannot figure out how to get Aperture to keep the, for me, very helpful "version 1, 2, ..." info attached to the images during renaming. In the Batch rename dialog box I am able to choose "Version Name" but that only gives me the current name of the selected image which I do not want. Aperture just replaces the "version x" in the image name.
Can anyone help me, or am I asking for something that cannot be done in Aperture?
Kind regards
Heine
DP 2GHz G5 Mac OS X (10.4.7) 3G Memory, BlueTooth, Aiport, 20" Cinema Display

HI, there:
I like answering these easy ones. Too often the questions regarding Aperture can't be solved as of yet becasue it's a bug or a lacking feature.
Anyway, when you import your files, look for the sidebar that has all the options on it. Look for a spot that says "Name Format." When you get there, there should be a drop down menu that will allow you to choose a variety of options. One of the options is "custom name with counter." Aperture will automatically assign each image a custom name and a numerical number starting with 1 and incrementing by 1 for a maximum of 999. You can change the options for this by selecting "edit" from the drop down menu.
Cheers

Batch Renaming loses Spotlight Comments, Os X to blame?

I posted this over at the Adobe forum for Bridge, however, I'm going to post it here too because part of me feels like this issue I'm experiencing is tied to a recent Os update: from Leopard to Snow Leopard.
I'm a photo editor for a wedding photographer and have been implementing some of my own personal workflows into his pipeline. I tend NOT to rename camera-generated files, at all, unless there's an important reason to do so. Sorting an entire wedding by "Date" works perfectly for building the proper timeline for a shoot. So camera-generated file names are perfectly okay for our needs.
When an edit is complete I'll generate JPEGs from Aperture. The resulting files will continue to carry the original RAW files names, unless there is a duplicate file name, then Aperture will add a number: "(1)" to the file, if necessary. Typically, after export, I run an Automator action that stores the file name in the Spotlight Comments. Because prior to shipping and archiving, I AM going to rename the final JPEGs sequentially: 0001_wedding, 0002_wedding, etc.
The beauty was that with the original name stored in the Spotlight comments for the JPEG, I would easily look at 0148_wedding.jpg, see that it's spotlight comments said, "Original Name: IMG_3471" and obviously know exactly what RAW image this new JPEG started as. Worked perfectly.
So process was: Export, Store Original Name in Spotlight Comments of JPEGs, Batch Rename (sequentially) based on date modified in Bridge CS4.
Well now everthing's changed. We had a system drive go down. We were running 10.5.8. When the system came back from the shop, with a new drive installed, it was/is running Snow Leopard. 10.6.3? I think. Snow Leopard, no doubt.
And now my prior workflow has been wrecked because the act of renaming, in Bridge CS4, erases all those handy Spotlight comments. However, part of me is wondering though if this issue is rooted more deeply, at the OS level? Because R-Name (Batch renaming utility) is now eradicating Spotlight comments as is an Automator action built for the same purposes. This all used to work perfectly. And the one major change that has occurred was this "upgrade" from Leopard to Snow Leopard.
So, question is: is there something I can alter in Bridge Preferences to maintain my Spotlight Comments, when batch renaming? Is this all tied to the Snow Leopard? Is there ANY renaming utility that's not going to fall victim to whatever the hang up here is?? How can I batch rename and not destroy my lovely Spotlight Comments in the process?
Thanks for your time!!

Yes, this works. However, this was already part of my workflow.... and not where the trouble lies.
After exporting jpeg images from Aperture, they carry the same name of the original RAW files, from which they came. (So, IMG_8342.jpg would have started it's life as IMG_8342.CR2.) But we dont' send them out like that. We sequentially name them 0001_image.jpg, 0002_image.jpg, etc... So after renaming, how do you find the original file again, right?
BEFORE the renaming phase, I would run the "Store Original Names in Spotlight Comments" action. That way, I could look at the comments for a derivative .jpg—whose name has now changed—and determine the name of the ORIGINAL file.
After renaming, the derivative file might end up being named 0361_image.jpg, but it's Spotlight comments would say, for example, Original Name:<<IMG_8485.jpg>>. Then I would know that this particular file started off as IMG_8485.CR2.
As such, I could quickly/easily backtrack, knowing that the original RAW file was named IMG_8485.CR2
The issue is that once you've gone thru the effort to ADD these spotlight comments, if you THEN go through a re-naming step, this erases all those Spotlight Comments. That was my problem... Getting the Spotlight Comments in place was never the issue. KEEPING them there was the problem.

Batch rename song titles and/or change case

Importing cd's makes a mess of my song title format.
The most common problem is a mix of cases: Proper Case (Capital for each new word) is the most common, but sometimes it's all lower case or all upper case. Especially the last one requires a lot of typing, title by title. Using an external renaming program does not affect the titles within iTunes. Is there a way to do that?
Similar problem often happens to classical music. Some cd's mention the composer and/or performer in the title field, followed by the 'song' (track name). I want to delete the composer/performer or transfer them to the appropriate fields. Can I do that in one 'batch rename' action within iTunes?
Thanks,
Wim

reposted the question, so marked this one as answered

Bridge resizes over multiple displays after "Group as stack" or "Batch rename"

Hi all,
pls - any idea how to force Bridge to stay displayed within one monitor after e.g. "Group as stack" or "Batch rename"? When I run these functions, Brigde spreads itself over both monitors, resizes all the thumbnails to the largest size a puts itself on top of all other applications. Very annoying. Any ideas how to make it stop doing this?
Thanks very much,
Tom

Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Batch renaming files and extensions?

Can someone tell me how I can do this? I have never used terminal or automator before, so I'm not sure how to go about it.
Thanks for any help.

There are utilities out there that do batch renaming. Try searching VersionTracker.com and MacUpdate.com
Next is a question of what you want to rename, and what you want to rename it to. That affects the code.
If you are going the Unix shell scripting route, you have to be careful about spaces in names, as Unix commands are parse on white space boundaries, and so a file name with a space in it may look like 2 files, neither of which exsits. So quotes are needed to prevent that.
Automator and Applescript are uses to spaces in filenames, you just have to master their usage. There are actual forums for Applescript
<http://discussions.apple.com/forum.jspa?forumID=724>
and Automator
<http://discussions.apple.com/forum.jspa?forumID=1261>,
which might be more helpful.

Batch rename question

Similar Messages

Maybe you are looking for