Batch Rename with String Replacement?

Is there a convenient way to batch rename files after they've been imported? The template mechanism seems to work well for creating new names, but not for renaming. For example, I originally imported and renamed my images to look like this:
Zemke_YYMMDD_NNN-O1.CR2
I decided I would rather have DRZ (My initials) instead of "Zemke" as the prefix. I was able to get it done with some contortions:
Metadata/XMP/Export
Remove all files from Lightroom
Rename all the external files to start with DRZ
Reimport all the files
Delete the XMP files
I think what is needed is for Rename to include string replacement (and string deletion) functionality. Is it already there?
Dan

Stefano, nonadjacent selection can be done by holding down Control and manually selecting the additional image. If you want to select a lot of separate ranges, the way to do it is to add each range to the quick collection (press the B key), then go to the quick collection and select all. It's exactly for those kinds of scenarios that quick collection exists. Once you get used to doing it, it's easier working with a "sticky" selection like the quick collection rather than the contortions required to extend standard selections.
To slightly add to Rory's comments: two-digit year plus spelled out month names and day of the week names are also available. Combine into any order you want, with any additional supporting text anywhere you want it, and you've got huge flexibility there. And no matter how complex it is, you can save it as a preset so it's readily accessible later.

Similar Messages

  • Batch Renaming with Counter

    I am trying to do batch renaming with a counter. Unfortunately every time I try to use a counter, it stays the same number.
    For example/
    I have two clips that I want to rename Ceremony 1 and Ceremony 2. When I do the batch renaming, the clips change to Ceremony 1 and Ceremony 2. The counter doesn't work.
    I could do keyword collections or rename them individually, but I have too many clips.
    I hope someone could help me.

    I figured it out. As you saw above, I wasn't having a problem batch renaming the title of the clips. I was having a problem with the counter. I learned in a previous posting that when you change the name of a subclip of a clip, it changes the name of both the original clip (clip in event browser, not hard drive) and the other subclips associated with it. It doesn't matter how you rename the clip (changing the name in the Name box of the Inspector, change it by clicking the name of the clip once in the event browser and typing it in, or using custom naming (click on the gear button in Inspector to find it), the name will always change correctly. For some reason (I guess a FCPX thing lol), you can't use the counter in custom naming correctly unless you change the original name through custom renaming. If you change the original name of a clip the other two ways, then try to change the new name of the clip using custom renaming with the counter, the counter will always stay the same number.

  • Batch rename with minimum numeber of digits in sequence number

    I'm pretty sure I remember this working how I wanted in previous versions of Bridge, but at least since cs4, it has not worked as I would like. I've tried searching for an answer or a setting that I'm missing, but have come back empty-handed.
    Here's my situation. Let's say I'm renaming 18 files. Each file has a sequence number. I want the sequence numeber for the first 9 to be one digit, and for the second nine to be 2 digits.
    i.e. image_1.jpg, image_2.jgp, image_3.jpg...image_10.jpg, image_11.jpg...
    The best way I've found that I can do this is to select all 18 images, and assign a 2-digit sequence number. Then, once that is complete, select the first 9 and repeat, but with a 1 digit number.
    In the past, I could select all 18 images, and choose a 1 digit number, and after 9, it would switch to 10, instead of going back to zero. Is there still a way to do that? I know it's only one extra step, but that one extra step is actually kind of two, because each time I have to reset tho starting number back to 1 or 10, and switch the setting from 2-digits to 1-digit and back again. And I usually have to rename multiple groups of files at once, so it does add up. Granted, much better than renaming one at a time, but not as convenient as I feel it could be, and as it once was.
    Am I missing something?
    Thanks,
    iLan

    While I certainly can understand the way in which computers work, I also understand that in a program as complex as any of the components in Adobe's Creative Suite, there is most certainly a way to override the computer's numerical logic so that it can remove the initial "0" from a 2-digit number. Granted, that may not be possible in the current version of Bridge, theoretically it is "Possible". And I'm quite sure it functioned that way in previous versions, although I really don't know which version I was using when it worked that way. Maybe cs2?
    As a developer, the whole reason for this question is to avoid having to create extra code in my applications to add an unnecessary "0" to digits 0-9 in any filenames of any files I want to load. Although it looks as though adobe changed the default behavior of the batch rename function, and removed (or in some peoples' minds improved) some functionality without an option to get it back.
    Unfortunately for me anyways...
    Thanks for the help,
    ilan

  • Batch Rename with additional "."s, drops the file extension. Request for "Keep File Extension" option...

    I NEVER name files with extra "." s in the name. I realize that all OS's (even Windows) will recognize it, but I haven't gotten out the old mindset of 8.3 filenaming... Although I do use longer names. So... I was surprised to see that when I was renaming files as per a clients naming preference to add a period within the name, the file extension is removed.
    For example: 
    original file -  2014_10_31_1643.CR2   when batch renaming to "2014.31" + sequence, drops the "CR2" extension.
    but.... if I change it to "2014_31" + sequence, the ".CR2" remains
    Since adding multiple "." is a legitimate naming convention, shouldn't the file extension remain?  Or, possibly this could be made more flexible by adding a check box "Keep file extension"
    just a thought.

    Refer to this stackexchange article:
    http://apple.stackexchange.com/questions/47319/how-can-i-make-os-x-recognize-new -file-extensions
    The finder will only select the filename only for "known" file types.

  • How to batch rename with index/counter all files in a project?

    I have a project with files named with an index (I believe that is the correct term).  For example, the files are named XX1, XX2, and so on.  However, some files have the same name because I imported from two different memory cards, without thinking to set the starting number for the second import into the same project.  I would like to batch rename all of the files (masters and versions) with a consecutive index (1, 2, 3, and so on).  How can this be done?  I have found in the manual the way to do this on import, but not how to correct my mistake now.  Thanks!

    I would like to batch rename all of the files (masters and versions) with a consecutive index (1, 2, 3, and so on).
    Select the images in the project and then use ( from the main Aperture application menu)
         Matadata -> Batch Change (Shift-Command-B)
    Set the Version Name format to one of the "Custom with Index ..." or "Custom with Counter ..." formats and check "Apply to Master Files". Make sure you disable all other changes that you do not want, like Time Zone correction, or keywords.
    Regards
    Léonie

  • Batch Renaming with Bridge

    Hi,
    Well I've never posted in the Bridge forum, but here goes!
    I work on a publication in which I have a long series of PDFs with the following names:
    p-1.pdf
    p-2.pdf
    p-3.pdf
    etc.
    I won't go into the details of why they're named like this, but I use Bridge to rename them into the following format (required by my printer):
    001PubName.pdf
    002PubName.pdf
    003PubName.pdf
    etc.
    The problem that I have is that if I have a long series of files (p-1 through p-200 for example), the Batch Rename process will only capture some of them.  It might do the first half (p-1 through p-100), and those will be renamed with the correct number.  Then, suddenly a few more pages will be named with something like p-565 (or other wrong number), then the last set will be left in their original p- names.
    What I'm trying to find out is how Bridge renames these.  Meaning, what does it look for to choose the rename process?  Usually if I do these in batches of no more than 50, it will rename them correctly (meaning the new numbered name will match the previous file number (p-25.pdf becomes 025PubName.pdf for example).  But if I do a longer list, a lot of them will be messed up.
    I eventually have to enlarge the thumbnails to their maximum size and compare the file name with the page numbers on every page (though that's still faster than manually renaming all the files).
    Any ideas?  Or suggestions on doing this?
    Thanks, Phyllis

    phyllisj9 wrote:
    Their download link is broken, but I'll see if I can find it on another site.
    So it is!
    I just googled "the rename" and picked cnet because they are well known.
    You've probably found it by now.

  • Help needed with String replace!

    Hi,
    I would like to replace all '\' characters with '/' in my string, ie:
         mystring.replace('\','/');
    Howeve, it complain about the '/' (Unclosed character literal).
    Any suggestions?
    Thanks

    Show us the line, you are probably using your regex incorrectly.
    In order to get the '\' you have to escape it (the '\' char. is used as the escape character so that you can look for things like " ' and new lines by useing \" \' and \n. Otherwise, how would java know you are looking for quotes and not closing your string?) As a consequence, your regex should look like '\\" for the \.
    The replace statement should probably be:
    string.replace("\\", "/");

  • Batch renaming with droplets

    I'm trying to create a Photoshop droplet that will:
    (1) resize a set of images
    (2) append a suffix to their document names and save them as a .jpg in a specific folder
    (3) repeat actions (1) and (2) so that I end up with several different-sized copies of each image, each saved under an appropriate name.
    For example, if I start out with a file called Image.jpg, I want to end up with a large version of the image called Image-large.jpg, a medium version called Image-medium.jpg, and so on.
    What I can't figure out is how to record an action that will rename images in batches. I tried Save for Web and Devices - using the file naming option in the "Saving Files" pane under "Edit Output Settings" - but that doesn't seem to have any effect. The file names that I input don't seem to get recorded - they don't show up in the actions pane - and I end up with a file that's just titled Image.jpg.
    I also tried editing the file naming in the Create Droplet pane. That gives me a file with the right title (Image-large.jpg), but it also means that I can't repeat the file-renaming action within the same droplet. In order to create separate images called Image-large.jpg and Image-medium.jpg, I would have to create two different droplets and run my images through both of them each time I want to process an image. I'd much rather have one droplet that can do it all.
    The other problem with using the Create Droplet pane to name my files is that I can't specify that I always want to save the file as a .jpg, no matter what format it's in originally. Save for Web and Devices seems to allow me to do that (and it also has some other options that I'd like to keep, such as the quality), but as I said, it won't allow me to rename the files the way I'd like to.
    Can someone help?

    I copied this from the CS3 help file:
    Saving Files output settings
    You set the following options in the Saving Files set of the Output Settings  dialog box:
    File Naming
    Choose elements from the pop‑up menus or enter text into the boxes to be  combined into the default names for all files. Elements include document name,  slice name, rollover state, trigger slice, file creation date, slice number,  punctuation, and file extension. Some options are relevant only if the file  contains slices or rollover states.The text boxes let you change the order and formatting of the filename parts  (for example, letting you indicate rollover state by an abbreviation instead of  the full word).
    In particular:
    ...enter text into the boxes to be  combined into the default names for all files
    Unless I am horribly confused, these settings apply to the save name of the file itself and allows one to include slice names if desired. However, I also see the following:
    Some options are relevant only if the file  contains slices or rollover states.
    I take this to mean that one cannot add a slice or rollover name if no such element exists however this should not prevent one from adding text or file creation date, punctuation, etc.

  • Multi batch renaming with automator

    Hi, everybody!
    Hope I can find help in this section. Else, please forgive me if I posted in the wrong place...
    I find myself in this situation.
    I have many pdf's I need to transform into JPG's, but of course I need the name to be "meaningful". Each pdf contains 30 to 100 "sheets", that is to say it will produce from 30 to 100 jpgs
    No problem with Automator and pdf-to-jpg.
    Original pdf name: meaningless (something like "Scan_01")
    JPG needed format: PREF_XXXXXX_EYY_S#
    prefix is (by now) fixed: MAD
    XXXXXX : a 6-digit progressive number BUT it has to increase each 4 jpg's
    EYY: a progressive number that could be even set by hand, as it indicates the "Envelope" from which pdf's were scanned
    S# : a number ranging from 1 to 4
    Just to be clear (I hope), here is an example of how a correct output should look like:
    MAD_123456_E01_S1
    MAD_123456_E01_S2
    MAD_123456_E01_S3
    MAD_123456_E01_S4
    MAD_123457_E01_S1
    MAD_123457_E01_S2
    MAD_123457_E01_S3
    MAD_123457_E01_S4
    MAD_123458_E01_S1
    and so on.
    Of course the point is not to prepend "MAD_" or whatever, and the "EYY" thing can go anywhere in the name (even after "MAD_"): I really don't know how to set a counter to switch from xxxxx1 to xxxxx2 each time S# reaches "S4" and, meanwhile, to reset "S#" to "S1".
    Any advice on how to do that?

    If I understand you correctly, you have a bunch of files that have been converted to jpg, and just want to rename them starting with a specified sequence.  The folowing Run AppleScript added to your workflow should be close - it extracts the name pieces from a dialog so that they can be manipulated and reassembled.  There isn't any error checking, it just assumes the format of the name is the same as the default answer:
    property divider : "_" -- the character dividing the name pieces
    on run {input, parameters}
         set output to {}
         set theAnswer to text returned of (display dialog "Enter starting sheet name:" default answer "MAD_123456_E01_S1")
         # break the name apart at divider - format is assumed to be the same as the default answer
         set {tempTID, AppleScript's text item delimiters} to {AppleScript's text item delimiters, divider}
         set {prefix, survey, envelope, page} to text items of theAnswer
         set AppleScript's text item delimiters to tempTID
         # extract numbers
         set envelope to text -2 thru -1 of envelope
         set page to (text -1 of page) - 1
         repeat with anItem in the input
              set page to page + 1
              if page > 4 then
                   set page to 1
                   set survey to survey + 1
              end if
              set theEnvelope to "E" & text -2 thru -1 of ("00" & envelope) -- leading zero
              set thePage to "S" & page
              tell application "Finder"
                   set name of anItem to prefix & divider & survey & divider & theEnvelope & divider & thePage & ".jpg"
                   set end of output to anItem as alias
              end tell
         end repeat
         return output
    end run
    Edit: I am a he, by the way.

  • Batch Rename causes error with 1000 files

    If I perform a batch rename with  more than 1000 files or more I get an error filled batch rename.
    I may have  6 difference sets of model poses with unique numeric names.  I select all files and rename with model's name and named sequentially with a 3 digit series.  What I get is a mix of the pictures in the sets with names that act like duplicates with a (1) in some of them.
    If I have less than 1000 files I have no problems. 
    Has anyone else experienced this?

    Paul
    Interesting but does not work here.  Tried it on a few test jpeg images.  Have enclosed the screen shot.  Unless I am doing something wrong, always a possibility, it does not list the old name, uses the new name,  and look at the extension.  It adds the sequence number after the extension so it is .jpeg003.  Which won't fly.

  • Batch Rename Malfunction, Force Quit to fix.

    Hey guys.
    I use Bridge quite often to manage assets at my studio, and I'm very happy with it's performance to date.  I have one issue that I only learned about yesterday and was wondering if anyone else has encountered the same thing;
    I had about 1200 assets I was partially renaming with the string substitution command in the batch rename.  (Just replacing number codes with the color that corresponded to it)
    I was working with subfolders, 2 folders deep, and had the view options set to hide folders and show all subfolders. (So I had all assets lined up)
    I selected all and then opened the batch rename dialogue.  I did a string subsitution, ok'ed it and it worked like a charm. 
    This is where I ran into problems.  Doing this process again, but changing the string sub variables, hit rename..... nothing.
    The strangest part is that Bridge would still function, except for the batch changes, and the quit command.  I had to force quit, restart, and highlight, batch rename a bunch of times to get what i needed done. 
    Anyone experience anything similar to this?
    Cheers,
    Eric

    The strangest part is that Bridge would still function, except for the batch changes, and the quit command.  I had to force quit, restart, and highlight, batch rename a bunch of times to get what i needed done.
    Anyone experience anything similar to this?
    Did try a string substitution on 100 files and after it had finished changed it back again with a new substitution without problems.
    1200 is a large number, did you wait for Bridge to finish the job completely? because if not it might be that this caused your problem. And maybe resetting prefs may help you also ( restart Bridge holding down option key and choose reset prefs. This resets all prefs to factory default including File type associations. Normally not a big deal but you need to reset your custom settings again after this).

  • Batch renaming Bookmarks

    I currently have Acrobat X Professional.  I have a 3000+ page document with several hundred bookmarks.  I want to split the document, but unfortunately the bookmarks are not unique and contain "/", which prohibit the split.  Is there a java script or program that will batch rename the bookmarks replacing "/" with dashes and adding a unique identifier to the end of a bookmark name (like 001, 002, etc)?

    I figured it out. As you saw above, I wasn't having a problem batch renaming the title of the clips. I was having a problem with the counter. I learned in a previous posting that when you change the name of a subclip of a clip, it changes the name of both the original clip (clip in event browser, not hard drive) and the other subclips associated with it. It doesn't matter how you rename the clip (changing the name in the Name box of the Inspector, change it by clicking the name of the clip once in the event browser and typing it in, or using custom naming (click on the gear button in Inspector to find it), the name will always change correctly. For some reason (I guess a FCPX thing lol), you can't use the counter in custom naming correctly unless you change the original name through custom renaming. If you change the original name of a clip the other two ways, then try to change the new name of the clip using custom renaming with the counter, the counter will always stay the same number.

  • String replace

    String has a replace method for chars, something the likes of
    String replace(char a, char b)
    I tend to think it would be nice to ammend String further with
    String replace(String a, String b)
    proponents/opponents? It seems like a nice thing to have.

    This type of method is available in the regex package
    (available in JDK 1.4). I am not expert or regular
    expressions but it will allow you to do this and much
    much more.I guess it will. Still it would be nice to have the ability directly inside String without explicitly having to instantiate a Pattern. I know there is a split method in String in JSDK 1.4 which takes a String specification of a regexp and internally compiles it. I guess my point is convenience but I should know the new APIs fully before writing more.

  • No batch rename?

    I like to re-arrange photos (i.e. weddings into ceremony, reception, etc.) before renaming. The stacking feature will be excellent for this. Is import the only place in aperature to re-name files other than manually doing it in list view? I am hoping that I am just overlooking this somewhere. If batch re-naming after import, stacking, and rearranging master images is not available, aperture's usefulness is greatly reduced for me. Might as well go back to Bridge and ACR.

    thanks for replying. I am still having a problem though. After sorting (stacking) by image date, time taken, I then manually sort some of the images (groups and formals taken after ceremony with formals before, etc.) In other words, sorting by time taken gets me in the ballpark but then I further re-sort some images the way I want them, some may actually be out of order from time taken. Then, when I batch rename with metadata batch, aperture still renames all files by the date and time and ignores any manual sorting I did. Bridge did not work this way - after manually sorting and getting images in the order I wanted them, the batch rename would sequentially name them in the order I arranged them in. It's all just a new workflow for me, I may eventually figure it out. I really want to like aperture! Unlike some others, I do like the raw conversions I am getting (Canon 5D and 1DMkII)

  • Batch rename of version name to fix a typo?

    When I import images, a have Aperture give them a version name that is composed of the date, the master file name and a custom part. (I know this is a bit redundant, but hang on for now).
    E.g. a version name would be "20101022-hopsack-DSC_1234". Note: no extension!
    Now suppose that fter importing I notice that I've got the custom name wrong; instead of "hopsack" it should've been "debrem".
    So I do a Batch change on those images, selecting the same version name format as in import, and type in the proper custom name, and voila, fixed, right? Wrong! The version name now contains the file extension, like so:
    Rename -> "20101022-debrem-DSC_1234.NEF".
    This is not what I wanted. Even worse, when you export this image with the current version name as file name, you'll get "20101022-debrem-DSC_1234.NEF.jpg". Looks rather stupid.
    Why does the [master file name] building block have different behaviors in Import and batch rename? Am I missing something?
    You could fix the version name with the Metadata inspector, but then you'd have to do it image by image.... OK for a few images, but not very practical for many.
    So, apart from making no mistakes during import, are there other ways to fix this?
    Oh, about that silly version name... I wanted to change the version names into something more sensible, but you can't batch rename images and re-use the custom name they have to make a new version name. So that would become a tedious process as well. Suggestion on how to handle this are welcome as well. (I could filter the images on custom name 1, batch rename with that name, then filter on custom name 2... and so on. Slightly less cumbersome.)
    Hints? Tips? Suggestions?
    Thanks,
    Peter.

    Sounds like the coder who implemented the code for this in file import didn't consult the corder doing it in the Batch change section
    Seriously, this isn't right, it should be one way or the other, ideally there should be two separate options, one with just the filename part and another with the extension, Then you could put them together any way you like.
    I'd send feedback to Apple concerning this.
    As for the situation you're in now, can't think of any easy way to make the change you want to.
    Sorry

Maybe you are looking for

  • Video audio doesn't work

    video audio doesn't work video runs but no sound please help

  • Is there any way to get preview of word,excel as accesory for JFileChooser?

    i want to set an accessory for jfilechooser so that i can preview documents file or any media files using the setAccessory method of JFileChooser. Will it can be done by Runtime.getRuntime.exec() as an win32 api method so that it can open the file in

  • How to turn off iTunes auto-start when iPhone connected?

    The option "Open iTunes when this iPhone is connected" is disabled (grayed out) in iTunes 10. The grayed-out check box is unchecked, yet iTunes starts every time I plug in my iPhone 3G. I would like to be able to plug in my phone without iTunes start

  • Time Machine preparing WAY too many items

    I just noticed that my Time Machine backups are taking an unusually long time. So when the last one finished, I immediately ran a second backup with Time Machine preferences open so I could watch the progress bar. It said it was "Preparing (about) 3,

  • Safari 1.3.2 and Yahoo! "Search" functions

    I am running Mac OS X 10.3.9 with Safari 1.3.2. Insatlled Safari "add-ons are Acid Search, PithHelmet and Safari NoTimeout. When I go to the Yahoo! home page, in the upper right of the page are the Yahoo! Search options (Web, Images, Video, etc.). In