Batch Renames do not carry over to Finder
When I Batch Rename my photos in Adobe Bridge, the images file names appear to change in Bridge, but when I close out of Bridge and open my images in Finder the images keep their old names and do not carry over the new Bridge batched rename.
Can anyone tell me how to get my files to permanently change their names from Bridge to Finder?
Working across a server in general, is not supported by Adobe.
Bridge in particular is very sensitive to any problem(s) in your server configuration, which we cannot troubleshoot for you.
This is the boilerplate text often used in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files. Working across a network is not supported.
See:
http://kb2.adobe.com/cps/406/kb406793.html
Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work. It should.
Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
When problems arise, a lot of valuable work can be lost.
Similar Messages
-
When opening the Bookmarks Sidebar, the oldest bookmarks added are at the very top, easily visible.
The most recent bookmarks added are at the bottom, requiring me to scroll all the way down every time I want to visit a recent bookmark. This is a major nuisance. I'm actually a little shocked that this happens when it's such an obvious hassle.
How can I flip the list of bookmarks so the newest ones are right at the top where I can easily access them?
Sorting in the Library does not carry over to the Sidebar as far as I can tell.Looks as though the SortPlaces add-on should be able to do it.
Similar thread: [http://support.mozilla.com/fur/questions/771606 I would like to find a way to save my bookmarks unsorted but with the newest saves at the top of the list. I don't want alphabetical order. 3.6.13 | Firefox Support Forum | Firefox Help]
Add-on: [https://addons.mozilla.org/en-US/firefox/addon/sortplaces/ SortPlaces :: Add-ons for Firefox] -
Just upgraded Elements 9 to 10. My neat image plugin did not carry over. Can anyone help me?
Go to Program Files or on 64 bit systems Program Files (x86) and find the file NeatImage.8bf in the PSE9 plug-ins folder. Copy it to the PSE10 plug-ins folder.
Alternatively go to Program Files\Neat Image and copy the file from the source.
-
I use my iPad for music when i teach my dance class. The default layout in the music program on iPad is: song title, artist and album. I need the name of the dance, so in iTunes, I right click on the song title, then choose "get Info". I then edit the info and under album title I write in the dance name. Then when i sync the iPad still has the same three columns, but the info i need displays under the album column. UNTIL i upgraded to ios7 and installed the latest iTunes. When I synced last night, after adding new music, the songs that were already in the playlist, stayed the same. ALL the new songs were placed in the playlist but none of the info that i edited synced. It shows it as i want it when i look at the playlist in iTunes, but it does not carry over after the sync.
I hope this makes sense and does anyone have any idea why?Amazing! I'm a dance instructor and am doing the exact same thing as you - and not seeing what I need on my iPad Air ... I can't believe there has been no reply on this! I also can't believe there isn't an easy way of seeing track info in the iPad or iPhone but I've spent hours searching and am not finding anything
-
Existing settings do not carry over on updating. ie: tabs below.
on updating firefox does not carry over and of the user adjusted settings. WTF
in previous version I could hover over a thumnail with the curser and it would open to size in a new phantom window. was a great feature.
I set firefox to check but not install updates. on the latest restart it installed updates anyway. please let me control this. ANOYED USER
''locking as a dupe of https://support.mozilla.org/en-US/questions/1007651''Hi,
I have just downloaded the 5.1.7 update and saw the following
Microsoft will end support for Internet Explorer for Mac on December 31st, 2005, and will provide no further security or performance updates.
Additionally, as of January 31st, 2006, Internet Explorer for the Mac will no longer be available for download from Mactopia. It is recommended that Macintosh users migrate to more recent web browsing technologies such as Apple's Safari.
So if you want it do it soon.
Happy Christmas everybody,
Alan
indigo imac 350 slot loading + 256 mg Ram = 320. 6 gig hard drive Mac OS 9.2.x -
Dashboard prompt value not carried over to report in a Link on Dashboard
The Dashboard prompt value is not carried over to the report displayed as a link on the dashboard. The report has the 'Is Prompted' filter. It does not work in both cases:
1. when the report in the shared folder is specified in the link.
2. when the report in a different page on the same dashboard is specified in the link.
Please help.First change column data format to HTML.
Then use following syntax:
'<aa href = "http://server/analytics/saw.dll?Dashboard&PortalPath=%2Fshared%2FPortal%2Ffolder&Page=pagename&Action=Navigate&P0=3&P1=eq&P2=Tablename1.column1&P3=1+'|| cast(Tablename1.column1 as varchar(30)) ||'&P4=eq&P5=tablename2.column2&P6=1+'|| cast(Tablename2.column2 as varchar(30)) ||'&P7=eq&P8=tablename3.column3&P9=1+'|| cast(Tablename3.column3 as varchar(30)) ||'" TARGET="_blank"> <ffont color = #000099>'|| cast(Tablename1.column1 as varchar(30)) ||'</ffont></aa>'
change ffont to font and <aa to <a and </aa to </a -
Adjustments not carried over to external editor?
I've noticed that all my adjustments are not carried over to my external editor (niksoftware). Is this intended? Is there an option I'm missing that would allow me to do so? Because basically this forces my workflow to first do any adjustment externally and then come back to aperture to do the aperture-specific adjustments. Is this how everyone does it?
This answered my own question, sorry for asking.
https://discussions.apple.com/thread/3339808?start=0&tstart=0 -
DNG Conversion Of Sony ARW Not Carrying Over In Camera Lens Corrections
One of the great features of the Sony NEX-7 is that the NEX-7 makes automatic lens corrections for vignetting, chromatic aberration and distortion problems. These corrections are written to the file and the preview. However, when converting these images from ARW to DNG the correction data seems to be lost, and the images revert to their uncorrected state. This requires all images to then be re corrected with the Adobe lens profiles, which is both tedious, an extra step, and also seems to produce results that are somewhat less optimal than the original corrections made by the camera.
Should not the ACR Converter and Lightroom retain the lens corrections made by the camera?A Tonal wrote:
This is one of those confusing issues where the way Sony describes the feature makes it sound as though it's part of the ARW format, and the way Adobe describe ACR and DNG makes it sound like this would be one of those manufacturer specific details that DNG is supposed to convert into a the Adobe format.
Yes, that might be so. It's similar with the manual of my Nikon D600. Nowhere does it say explicitly that all these adjustments (including lens correction, Active D-Lighting, etc) work only for the JPGs. And it cannot be otherwise.
A Raw image is not defined yet, not written in pixels yet, heck it is not even an image.
The Raw image is only affected by the exposure, that's pretty much the only thing. Even White Balance is nothing but a metadata tag that - luckily - is read by Lr.
A DNG is Adobe's answer to the various Raw formats. But it is designed to behave like a Raw image. Therefore you cannot expect that camera settings that affect JPGs only carry over to DNGs.
A Tonal wrote:
There are so many features on cameras that are only supported with JPG output that it almost makes it not wroth bothering with RAW, as by the time you get to the end of the process, with all the extra steps and work involved in handling RAW, you pretty much wind up with something that looks like a JPG anyway, and you had to give up using some of the camera's features to use RAW.
This shows that you don't understand what Raw is and what its advantages over JPG are.
I would recommend that you educate yourself about the advantages of Raw. Your photography would benefit from this, believe me.
Google "Why should I shot Raw?" and you will find lots of good webpages.
Finally, Raw shooting is much simpler than shooting JPGs where you always have to fiddle with the virtual 100s of different settings for JPGs.
What do you have Lr for? In Lr you can adjust your Raw image by looking at it on a large calibrated monitor, whereas for the settings in your camera you have to rely on a 3" monitor - at best.
Make your life simpler and your photography better: Shoot Raw. -
I attempted to batch rename files in Adobe Bridge CC. Nothing happens. I force quit as Bridge will not quit on command (which is strange as Photoshop will). When I reopen Bridge the files have been renamed "AdobeBatchRenameTemp(than the file name I asked it to write)".
Any ideas what is wrong with Bridge? ThanksHi
Are you using Mac Or windows please mentioned some of the system specification as well as it will be helpful
if you are using mac . please go to a location ~/library/cache/adobe "there will a folder by the name of Bridge CC please move it to desktop and then restart the bridge. this should take care of the cache issue.
if you are using windows , please go this location C:\Users\user name\AppData\Roaming\Adobe\Bridge CC and move the cache folder to the desktop
and restart the Adobe Bridge CC -
Batch rename does not remove original filename
Bridge CS4 ver 3.0.0.464
Not sure what I am doing wrong but when I try to batch rename my files for some reason I cannot remove the origanal filename,
I have checked the preferences and searched for a solution and have come up with nothing.
Any help would be great. Thank you.This has fixed the issue, however it is not really an ideal solution as it deletes all custom preferences, was there not a way to to reset just the renaming preferences?
Thank you anyway, I forgot about cntrl bridge! -
Related to
this post, in cases where it's desirable to have two different workflows for two different Lists—is it possible to NOT bring forward a hardwired workflow when creating a new List from a saved template?
I.e. List #2 still has the workflow from List #1 hardwired in. List #1 still needs its workflow but List #2 wants to have a separate Workflow.More importantly, because it's relatively easy for most folks to just start from scratch with a new Workflow—how does one disassociate a carried-over Workflow from the new List?
Use the web-GUI. (List Settings > Workflow Settings)
From Designer, there's a shortcut button at the top of the page in the Workflows tab: "Administration Web Page". -
Session data not carried over. with IE6SP1 and WL7
Hi,
We recently upgraded our clustered WL to WL7x and after that we started seeing
a strange problem regarding session data of our HTML/Servlet pages.
When we access the pages through this cluster, the session data(browser cookies
not accepted) is not carried forward in IE6 SP1. With IE5x it works fine. The
Local Intranet is always coming as blocked for the cookies. I am not able to reset
the settings also.
The same set of programs are working fine with server running WL5x.
Is it anything due to P3P or is there any setting I should do at WL7 level for
this problem? When I do the URL rewriting this works fine but, as many are static
HTMLs submitting servlet request, we are not able to do URL rewriting.
Any help on this will be highly appreciated.
Thanks
kavithaIt doesn't seem to be a problem with serializable attributes though.
Also Weblogic doesn't use the distributable tag. So that should
not matter too.
Can you investigate further and try to pinpoint the issue?
When we access the pages through this cluster, the session data(browser
cookies not accepted) is not carried forward in IE6 SP1What do you mean by session data not carried forward?
-Vinod.
"Stjepan Brbot" <[email protected]> wrote in message
news:[email protected]..
>
"kavitha" <[email protected]> wrote in message
news:[email protected]..
Hi,
We recently upgraded our clustered WL to WL7x and after that we
started
seeing
a strange problem regarding session data of our HTML/Servlet pages.
When we access the pages through this cluster, the session
data(browser
cookies
not accepted) is not carried forward in IE6 SP1. With IE5x it works
fine.
The
Local Intranet is always coming as blocked for the cookies. I am not
able
to reset
the settings also.
The same set of programs are working fine with server running WL5x.
Is it anything due to P3P or is there any setting I should do at WL7level for
this problem? When I do the URL rewriting this works fine but, as many
are
static
HTMLs submitting servlet request, we are not able to do URL rewriting.In clustered environment session object must implement Serializable
interface.
Also your web application has to have parameter "distributable" set ontrue
in "web.xml" configuration file.
HTH -
Animation not carried over from Motion to FCP
In my FCP project, I sent a clip to Motion. In Motion, I imported another motion file of a car with spinning wheels that I made earlier and used that in the new Motion clip, along with some additional animation. Now, when I go back to FCP the car is visible, the additional animation is also visible, but not the spinning wheels. Is it not possible to embed Motion files within Motion?
When I export the clip from Motion directly to a QuickTime movie, everything is fine. But I'd rather don't go that route because it's much easier to move between FCP and Motion automatically.
Can someone please enlighten me? Thanks!I'm guessing Final Cut is not referring back to the Motion file correctly. If that is the case here's a fix.
Open your Motion file back up (recent projects if you aren't sure what it is) and resave it by a different name somewhere you can easily find it. Alternatively you can export is a ProRes4444 clip if you don't want to have to render it on your FCP timeline.
Return to the clip in Final Cut. Control-click on the clip that should be a Motion document and pick "Reconnect Media." Point Final Cut to the resaved/exported Motion file you created. You may have to uncheck the box about showing only media with the same reel name. Hit Connect. -
Lightroom 4 settings are not carried over to Photoshop CS5
When opening a raw and unedited file using the 'Edit in Photoshop' menu selection in Lightroom 4 the image opens as expected in Photoshop CS5. The images seem to look identical to me. If I then exit from PS without doing anything to the photo I am prompted to save the file. I do so and return to LR4. Comparing the original raw file and the tif created by PS they appear to be identical.
Next, I make some whitebalance, exposure, and cropping changes to the raw image in LR4. 'Edit in Photoshop' opens the image in PS CS5 but the image appears different. Cropping is there but other adjustements seem to me to be lost. Again clost the image without any editing in PS CS5 and am prompted to save the file. I do so and the saved tif appears in LR4 just as it looked in PS CS5. However they are different.
I'm using a Windows 7 64 bit computer.dls1956 wrote:
When opening a raw and unedited file using the 'Edit in Photoshop' menu selection in Lightroom 4 the image opens as expected in Photoshop CS5. The images seem to look identical to me. If I then exit from PS without doing anything to the photo I am prompted to save the file. I do so and return to LR4. Comparing the original raw file and the tif created by PS they appear to be identical.http://4scotts.smugmug.com/photos/i-VpkGKTd/0/L/i-VpkGKTd-L.png
Next, I make some whitebalance, exposure, and cropping changes to the raw image in LR4. 'Edit in Photoshop' opens the image in PS CS5 but the image appears different. Cropping is there but other adjustements seem to me to be lost.
The most significant point is that the first time you go to Photoshop with an image, you start with one image inside LR and you end up with two - the original image, and a brand new edited version. Generally this is "Edit a copy with Lightroom adjustments"; in other words, something that looks the same as the LR starting image currently does, as a starting point for PS alteration.
Subsequent times you take this edited version of the image back to Photoshop, the Edit In.. feature automatically switches to "Edit Original" as default behaviour. This is so that you don't get a whole family of fresh image versions appearing in LR, and a whole cluster of TIFF files on disk. Just the same image progressively changing over time, as PS work is done.
A PS-edited version seen newly in LR, starts out with zero applied LR adjustments - so it appears at first, exactly as PS has just saved it.
Say (to help clarify this ) you make a virtual copy at this point - and apply some more LR adjustments onto that. You can now see three versions: [1] the starting original which did not go to PS; [2] an untouched version of the PS edit, which has so far been left alone by LR; and [3] another version of the same PS edit, this time with some new LR adjustments overlaid.
If you push the image back to PS for some more editing, save that, and return to LR then both versions [2] and [3] are going to update so as to reflect this later editing. That is because both are deriving their underlying content in a live manner from the same file on disk, which has since changed.
While you are editing any file within PS you are always viewing the actual content of that file. This will naturally look the same as the untouched LR version [2] does. But it will not look the same as the adjusted LR version [3] does - because the live LR settings which cause [3] to look different to [2], are not included in the PS file which they share. They are separate from that - they are being nondestructively applied and displayed on-the-fly by Lightroom only, and in this example, only in the case of one of the two derived versions.
RP -
F110 - Pmt Method in Vendor Master not carried over
Hi SAP Experts,
Am relatively new to SAP-FI and would like to ask for your invaluable tips on my problem.
Am using F110 where my payment method is "C" and all of my vendor open items don't have any payment method for each invoice.
When I run F110, the payment method "C" in the vendor master is not taken by the system and so all of my open items are marked as "exceptions".
Did I miss out on any settings in my vendor master or in my payment method set-up so that when F110 is ran, the payment method in the vendor master will be used by the system if the invoice does not contain a payment method.
Thank you all for your help!Hi, upload vendor open items with requaired method using FBL1N. Select required items and click Button Mass change.
Payment method in master data will be picked up to Item by default if you don't maintain it manually or by substitution.
Maybe you are looking for
-
Recommendations for a content marketing vendor?
I'm looking for vendor recommendations to help us with persona creation, journey mapping, content audit and gap analysis. I have one promising company I've been chatting with and looking for 1-2 others to compare. Any fellow Eloquians out there have
-
TS1347 Problem with Calendar syncing
I put dates on my I Phone, but they do not appear on my outlook desktop. If I put a date on my desktop it will appear on my iPhone, what is the problem?
-
Hi Oracle Team Members, I want to know on what scenarios RCV_TRANSACTIONS is inserted and updated. When we receive PO items a line will be inserted. and when we return item to supplier then also a line will be inserted into rcv_transactions table. Is
-
i followed all the instructions for downloading firefox. when i tried to drag it into the applications folder it had a circle and line through the icon. it copied into applications successfully, but it won't launch. this mac is really old, G4 from 20
-
Accessing Portal Service from web dynpro : NoClassDefFoundError
Hello Experts, I tried to develop a portal service (EquiService) and a web dynpro application (wdequset) which accesses the portal service. I put my web dynpro in an IView to show it in the portal. The service is running but when I try to open the IV