Batch renaming setting xmp to read-only

Doing some batch renaming of audio files and it seems like randomly xmps are being set to read-only, losing the previous filename preservation in the process.
Purging the cache for the folder seems to reset the xmp back from read-only, but i dont know
why it is happening.

Hi Felco,
In the method IF_CRM_BSP_MODEL_ACCESS_IL~READ of the class associated with your structure(MAC) you have a parameter ET_FIELD_ATTRIBUTE in this you can mark the fields with this properties:
A     Not Changeable
B     Not Relevant
C     Mandatory Field
Regards.
Manuel

Similar Messages

Bridge CS5 Win Batch Rename sets milliseconds to 000

Am using BridgeCS5 (Windows7) to Batch Rename (either during download from Lexar Card Reader using Bridge, or during download from Canon 7D with Cable via Bridge- or to batch rename files already in a folder within Bridge)
when I use YYYYMMDD_HHMMSS_milliseconds, milliseconds are set to 000 (thus photos are not in order necessarily if photos taken during burst mode), yet if I use YYYYMMMDD_HHMMSS_milliseconds, it sorts properly.
Have tried this multiple times, and it is *usually* reproducable - I did a batch rename on a subset of photos, and Bridge got the rename right, but then did a batch rename on the entire lot of photos, and preview said it would set the milliseconds to 000, even on the photos it got right in the subset-experiment
I need to use numeric month designation (MM) for proper file sequencing, as alpha (MMM) puts months out of chronological order.
I did NOT notice this problem in the past (say, 3-4 months ago) but it is possible I missed it.
I am NOT syncing multiple cameras or trying to integrate files from multiple cards.
BridgeCS5 is up to date with all patches.
(I checked the EXIF data on the files themselves, and it is correct, the milliseconds denote the proper image sequence, the camera is recording the files to card in correct sequence - in fact, exloring the card, all images are in proper sequence)
By having files renamed (without a sequence number added to the batch rename configuration) with milliseconds to 000, not only are they out of order, but Bridge is willing to have several files with the same exact name.
I'd be interested in a solution that allows me to continue using Bridge only for my workflow.
thanks - stir

Hi-
I see milliseconds (Canon 7D) listed as
(see Advanced tab)
3rd folder down titled "exif Properties"
eg: exif:DateTimeOriginal: 2011-07-30T10:43:12.64-04:00 whereby the camera has ordered the photos using 10:43:12.64, 10:43:12.99, etc when writing to the card. (I intepret the .64 and the .99 in these examples to be the milliseconds - am I mistaken?)
Realizing of course, the fact that Bridge is setting milliseconds to 000 is not the biggest concern, the biggest concern is that the photos are out of order when they are imported using the Batch Rename YYYYMMDD (but not when using YYYYMMMDD - notice the three M's there)
This error occurs whether telling Bridge to sort specifically via Time or not - Bridge (when using YYYYMMDD) will reorder the images even if I don't add HHMMSS and milliseconds to the sort, or even if I do - the problem seems to be the YYYYMMDD - it may also be other Date-sorting, but so far I have only used the one (that doesn't work) and the other (that does, but is useless for keeping the dates/months in numerical order)
Again, on CF card, the photos are properly ordered, as evidenced by the subject matter and the milliseconds shown in the DateTimeOriginal exif data
But in Bridge, when batch renaming, the order of the photos is mixed up, and this is evidenced by the new file names (say, if I add a sequence number to the rename)
btw, I have Bridge rename set to preserve XMP data and original file name, but whether I do or not doesn't seem to matter.
I'm shooting JPGs in Burst Mode (shouldn't matter, as the files on card are properly ordered)
(so far I have had 2 Canon reps tell me there are no milliseconds, but the exif data clearly shows that, I think? - I have sent them a screen shot of the file info, showing the exif field, and have not since heard a response saying "nuh uh"... it's still early in the day, though they normally respond within 30 minutes)
Thank you for your time - Stir

Batch rename trashes XMP relations

I just lost 400+ adjustments to all my raw images, I had imported them over several days of shooting, and edited and made quite a few adjustments.
I like to name all my images with the date and seq #, like YYYMMDD_SEQ.
After this set was completed, and I deleted many images, I wanted to rename them all with a new SEQ#, so I used the batch rename.
Except that the XMP associated with the old file name is not changed, and all the adjustments I made to the RAW files are now gone.
Not real happy about that, as you can imagine.
What did I do wrong, other than rename them after the fact?
TIA
Rick

Thanks, I did find the XMPs, they were there in the path, but the names were the old file names, and thus they were not associated with the correct NEFs.
I made all the changes to the NEFs again, so now I have a DIR with images and correctly associated XMPs.
I checked the box as suggested in the above thread, copied the DIR to a test DIR, did a batch rename, and all the XMPs changed with the file, there are no orphans now.
So I do not know why this happened, but I clearly had to redo all the adjustments after a batch rename, and now I do not, so thanks for the link, I tried it with the box checked and not checked, and it worked fine both times, so I guess this was a fluke.
TIA
Rick

SQL Query (Updateable Report) conditionally set a column read-only with lov

Hi
I'm attempting to set a column that has a select list lov read-only if there is existing data in the column otherwise permit the end-user to enter a value using the select list.
I've looked at Re: A better method of handling tabular forms with variable column type? and using this code as an example it almost works, except the select list lov button is still active and therefore the data can be changed. How does one conditionally disable the select list lov button in Javascript?
TIA

In the JS code where you make the field readonly, add another line to hide the lov opener link ( in jQuery it would be *$('<selector>').hide()* ).
If you can provide the HTML code from your page for such a column (the JS code would depend on the template/theme), I can try helping.

Custom.pll to set block to read only

Hi all,
I want to use custom.pll to make the item revisions
form read-only for certain responsibilities in 11.5.9.
What is the best property to set to accomplish this?
Alterable_plus looks like a good candidate...
Thanks,
Scott

Actually, it looks like alterable_plus works at the item level - is there a property I can set for the block?
Thanks,
Scott

Set .jpg as read only OK?

Whilst I shoot raw with my SLR's, the 'toy' compact only shoots jpgs
I'm fed up with them changing all the time when I add key wordwords, develops, etc.
Sadly, LR can't create XMP's, so I'm thinking of making all my jpg's Read Only.
Obviously this will mean that external programs won't see the keywords, which is not an issue, but will LR be happy to write everything to the DB and ignore writing to the jpg, or will it have an issue?
Ta,
Mike.

Mike,
DramaticFoto wrote:
Obviously this will mean that external programs won't see the keywords, which is not an issue, but will LR be happy to write everything to the DB and ignore writing to the jpg, or will it have an issue?
Why ask us when you could just try it?
Also, you could turn off "Automatically write changes into XMP" in your Catalog Settings. That would also stop it for your raw files, but that could possibly be OK. You could always do it manually for your raws if you prefer.
Hal

Set Mobile me read only ical

I would like others to be able to log into my ical through mobile me as read-only and not have any access at all to the other applications such as contacts idisk, email, etc.
Is there as way to set MobileMe for this type of usage?
Bryan
< Edited by Host >

you can do that by calling class method CL_GUI_FRONTEND_SERVICES=>FILE_SET_ATTRIBUTES exporting parameter READONLY
note: this will work only in the foreground, it is not possible to do it in a background job

Lion administrator setting changed to read only for file sharing. Now hung machine

I was trying to network my Mac with a WIndows 7 machine and tried to have my name in the file sharing read write instead of other users such as administrator when I changed the administrator to read only for file sharing rights and could not add my name as a file sharing user with read write permissions Really silly move
I have performed a repair of disk permissions however still hung.
Whats worse is that my time machine for the last three days has been disconnecting when backing up leaving a partially complete backup. Backup failed. I also left a apple support community message a few days ago to solve it.
So its critical
Timely HELP is needed.

This same problem happened to me, all the sudden one day my mac decided to revert to the original standard root username and password which I obviously did not know. In order to change this:
1) Activate single user mode on reboot as by pressing cmd + s as your computer starts up. Make sure you do it right away, and keep the keys pressed down.
2) Where the cursor pops up, type exactly
+/sbin/mount - uw/+
3) When the next cursor pops up type exactly
passwd
4) Then you can type any password you want (now changing the root password to be what you want)
Note you will not be able to see what you type, but the text is being recognized
5)The computer asks for you to retype the password, retype it
6) Type reboot
Once the computer restarts you can navigate to system preferences>accounts> and then unlock the account (lock is located on the bottom left corner) using Username: root and the password you just set. Henceforth, you can appoint your account as the administrator. Hope it works!

Set word file read only after exporting through mail merge

Hello,
I am exporting the ALV report to word file using standard functionality using mail merge.
But my requirement is after exporting to word ,file should be protected or read only.
Plz Help me to solve this issue.
Thanks,
Paresh.

you can do that by calling class method CL_GUI_FRONTEND_SERVICES=>FILE_SET_ATTRIBUTES exporting parameter READONLY
note: this will work only in the foreground, it is not possible to do it in a background job

Set fields to read-only after addInstance()

I have this function on my form "add row" which allows user to create a new row to fill in additional fields; when user click submit, the fields of the form will become read-only.
however after i add another new row into the form, when i click submit that row does not change into read-only.
this is the code for my add row: Table1.Row1.instanceManager.addInstance();
and this is the code for my submit button, whereby upon clicking the field becomes read-only
-----Test.#subform[0].Subform2[1].buttonForm.Submit::click - (JavaScript, client) -----------
Test.Subform1.IsSubmitted.rawValue = "1"; //submitted ----0 is default
Test.Subform2.Payee.access = "protected";
Test.Subform2.Name.access = "protected";
Test.Subform2.GST.access = "protected";
Test.Subform2.Amount_GST.access = "protected";
Test.Subform2.Currency.access = "protected";
Test.Subform2.Invoice_Date.access = "protected";
Test.Subform2.Invoice_No.access = "protected";
Test.Subform2.Company_Code.access = "protected";
Test.Subform2.Tax_Code.access = "protected";
Test.Subform2.Payment_Method.access = "protected";
Test.Subform2.House_Bank.access = "protected";
Test.Subform2.Description.access = "protected";
Confirm.presence="visible";
Edit.presence="visible";
Submit.presence="invisible";
Add.presence="invisible";
Table1.Row1.GL_Account.access = "protected";
Table1.Row1.DC.access = "protected";
Table1.Row1.GL_Description.access = "protected";
Table1.Row1.Amount_exclgst.access = "protected";
Table1.Row1.Tax_Code.access = "protected";
Table1.Row1.Fund_Center.access = "protected";
Table1.Row1.Cost_Center.access = "protected";
Table1.Row1.Button1.access="protected";
Test.Subform1.StaticText1.presence="invisible";
Test.Subform1.Summary.presence="visible";

Hello,
Perhaps you could create a trigger for that table that prevents update, delete and even insert of rows before a specified timestamp.
CREATE OR REPLACE TRIGGER <Triggername>
BEFORE INSERT OR DELETE OR UPDATE ON <Table>
FOR EACH ROW
BEGIN
IF <RowDate> < <sysdate - <days>> THEN
Raise_application_error(-20001, 'ROW is in read only range.'
END;
null

Set up a read only group on the config.xml file through Admin console

I would like to set up a group which can use Admin console
(http://ip:7001/console).
However, this group cannot deploy, modify anything on the configuration. In
the document, I can add ACL lists. But how? The table of permission
function on the document is not clear. For example, there is no READ and
WRITE on the table in the Admin Server guide. Please help.
If I have guest enable on the Admin console. What is the user name and
password of a gest to use the Admin console?
Thanks for help.

Do you want to expose the Admin app on the same network as the managed app?
If not, just hide (black hole) the IP/port to the admin server.
If I have guest enable on the Admin console. What is the user name and
password of a gest to use the Admin console?I don't think guest has a password. Allowing guest means non-auth'd users
can access it.
Peace,
Cameron Purdy
Tangosol, Inc.
Clustering Weblogic? You're either using Coherence, or you should be!
Download a Tangosol Coherence eval today at http://www.tangosol.com/
"SLC" <[email protected]> wrote in message
news:3c5dcd78$[email protected]..
I would like to set up a group which can use Admin console
(http://ip:7001/console).
However, this group cannot deploy, modify anything on the configuration.In
the document, I can add ACL lists. But how? The table of permission
function on the document is not clear. For example, there is no READ and
WRITE on the table in the Admin Server guide. Please help.
If I have guest enable on the Admin console. What is the user name and
password of a gest to use the Admin console?
Thanks for help.

Set a record read only

hi everyone,
i would like to know if is it possible to desable any update (or delete) from a specific record, if a flag is on? Let's say that this record reflect an old situation and must not be changed
Thanks

Hi,
This may be the code....
create or replace trigger a on table_t before Insert or update
begin
Raise_Application_Error(-200001,'Soory Your are not allowed to Entter...');
end;Regards,
Ganesh R

SelectBooleanCheckbox read-only after setting selection

Hello!
I'm trying to set the selection of an adf selectBooleanCheckbox!
When I set it by the pull-down menu (true, false) in the Property Inspector, everything is ok!
But when I set the selection depending on an ADF binding, the value is set correct,
but the checkbox is read-only and a change of the selection is impossible!
Here's the very simpel code of the Box:
<af:selectBooleanCheckbox
label="myLabel"
value="#{bindings.SomeValue.inputValue != null}"/>
Can anyone help me, how to enable the checkbox for selection?
Thank you very much!
Sebastian
PS: I'm using JDeveloper 10.1.3.3!

hi..
the previous error is ok now..
below is the script, the status is when click on 'Add new row' button, it will pass status = 'ADD_ROW' and set the startdate read only = False.
my question now is...
e.g i've a multiple rows (can display up to 10 rows) display in table form in the page....i query 3 rows of records, then i click 'Add new row' button,
how to make sure the 3 rows queried early is having startdate read only = Yes and for the new row startdate read only = False?
with the below codes it will set all rows startdate read only = False (including those queried data)... pls help...
public void setReadonly(String status)
OAViewObjectImpl vo = (OAViewObjectImpl)findViewObject("SeaoeAutoMosPVO1");
OARow row = (OARow)vo.first();
OAViewObject SeaoeAutoMosSummaryVO = (OAViewObject)findViewObject("SeaoeAutoMosSummaryVO1");
OARow SeaoeAutoMosSummaryRow = (OARow)SeaoeAutoMosSummaryVO.getCurrentRow();
if (status=="ADD_ROW")
row.setAttribute("StartDateRender", Boolean.FALSE);
else
row.setAttribute("StartDateRender", Boolean.TRUE);
}

Changing sales employee on document set to read only

*Our customer has invoices set to read only for certain users. however they need these users to be able to change just one field - sales employee.*
*Is there anyway this can be achieved??
Edited by: Samantha Glanville on Oct 8, 2009 3:25 PM

If it set up as read only, there is no room for updating even only one field. Better leave this to other more powerful user to change. Otherwise, the read only setting would be overridden.
Thanks,
Gordon

Globally setting read-only classes

Is there any way to globally set all 1-1 mappings to
read-only AND have them write out the columns(s) on the
object they represent. I would like to do this without
having an additional direct to field mapping for the column.
I am trying to not have to programmically set readonly classes for objects.
Thanks

Not sure I follow what you mean by "write out the column(s)" -- I assume you mean as a step in logging?
You can get the descriptors from a Session (or Project if you use the old way of creating sessions and want to do this before login) by saying "getDescriptors()". You get a hashtable key=class and value=Descriptor. Then you can get the mappings from the descriptor and pretty much do whatever you want (i.e., check for mappings that are 1-1 and set them to read only, get the columns they map to, etc). Check the Javadoc on Descriptor for more info.
- Don

Batch renaming setting xmp to read-only

Similar Messages

Maybe you are looking for