Batch reservation & Allocation in process order

I am allocating batch to process order components(for active ingridient)While I am allocating the batch I am able to select the batch which has all of its quantity reserved,which is not desireble.Any solutions please??/
Eg.In MMBE my batch stock(say for batch AA11) is as follows:Unres stck 100 & reserves 100
If I am determing batch for a different process order where this component is used,I am able to select the same batch,even though it has no open quantities.
Please suggest

Hi Rele,
Please check in CO09 transaction for the availability of this batch stock whether it is free or confirmed to any other component like.
Regards
R. Senthil Mareeswaran.

Similar Messages

  • Batch not updated in process order

    hi all,
                When i am doing batch determination and goods issue through coik pick list batch not update in process order. presently we are not doing batch determination in process order.after goods issue component batch fields are grey out in the process order

    HY,
    Batch field are filled only if you do Batch determiantion of components whether it is by auto or manual.And it is logical also becasue if you split the material qty. in more than one batches during goods issue( whether it is in COIK or in COR6N)then think what should be the case in Component screen in process order?
    As soon as you complete the Goods Issue This field becomes gray but the filled of Quanity withdrawn is update with qty you have withdraw.
    Regards
    Dhaval

  • Stop Creation of reservation while creating process orders....

    Hi All,
    THe requirement is to stop creation of reservations on creation of process order.
    have done the configuration in order type dependent parameters to stop creation of reservations on creation of process order.
    After this configuration the reservations have stopped appearing in the MMBE for components although there are reservation created.
    The above case appears only when i am creating process orders manually through transaction COR1....But when process orders are created by converting Plann order then in this case although the order type is same there are reservations visible in the MMBE transaction for the components.
    Request you to please guide through the reason for creation of reservations when a process order is created by converting a plan order.
    Thanks in advance for your help.
    Vinit

    Hi All,
    We are using the planning strategy 40 where in we produce only when the sales order is received.
    For a material we are using SPK as stock transfer from other plant.
    The requirement for this material is triggered due to 1)dependent reservation(as this component is used as a component to manufacture other material 2)Sales requirement for this material.
    On MRP the requirement is transferred to the supplying plant and we receive the stock in our plant.
    Now this stock is the total of requirement generated to fulfill the sales requirement and the consumption requirement.We cannot differentiate which stock was called in for sales order and which for fulfilling the production requirement of the superior material.
    Whenever a production order for the superior material is created reservation for this material are created because of which the stock will not be available for creation of deliveries for sales orders.(This is because of the av checking rule)
    Is there a way to differentiate these stocks.
    We thought about creating MRP areas to manage the requirements differently but this will lead to creation storage locations and thus affect our global template.
    Thus we thought of blocking of creation of reservations......this we thought as all the materials are already available by the time the process order is created so there is no point in creating reservations for the same.
    Let m know if you need any further information .......Help me providing a proper solution to the issue.
    Thanks in advance

  • Replace the component after batch determination in the process order.

    Hi dudes,
    How we can replace component for which batch determination done with a new component in a process order. can any body suggest if its possible.
    thanks in advance.
    Robert

    Hi,
    i am not able to delete the component in the materials overview after the batch allocation done by batch determination rather giving batch manually.
    i.e if i give batch directly in the batch field i can able to delete that entire component row, but if do batch determination for that component once its done i can't  able to delete.
    thanks in advance
    Robert.

  • Batch determination issue in process order Material quantity calculation

    Dear Gurus,
    We are facing issue in auto batch determination in process order (Material quantity calculation ).
    eg Material X  is active material 200 KIA used in BOM as
    10  X   200  KIA  
    20  Y   10           Filler
    30  Z
    40  X   200  KIA
    50  Y
    60  Z
    We select line item 10 and 40 and do Batch determination system proposes 2 batches for line item 10 as Batch A and B
    and for line 40 again Batch A (with 0.01 KIA) and batch B proposed which is wrong.
    For line Item 10 Batch A and B
    For line Item 40 Batch B and C or as per FIFO logic.
    As Batch A should be consumed in Line item 10 then it proposed Batch B and so on....
    We have already maintain data in COB1.
    Can any body explain what is wrong in determination.
    Regards,
    J.H.Pert

    Hi Pert,
    Follow the below link you have some idea OK.
    Any questions revert me back.
    Batch search strategy
    Regards,
    Madhu.G

  • Error in manual batch determination while creating process order

    Hi Expert,
    Manual batch determination is happening for some of material and for some material it is working firne  when creating process order,
    Pleae assist
    Thanks
    Intekhab

    Dear,
    please open this prd order in change mode CO02 then press tab button cost calculation near release button in order header screen now do not save this order go to edit >log> cost calculation
    There it will show the error tht occured during costing
    Please refer this thread,
    Cost error when saving production oredr
    Regards,
    R.Brahmankar

  • Deafult batch for component in process order

    Hi Experts ,
    in one of the scenario the client requirement is the batch number for eg- "a" , should be automatically populated in the batch number column of the component in process order while saving or while release.
    this should be done only for components  that are  backflush active.
    can it be done by any user exit /Functionm module etc...
    please advice.
    regrds,
    satish

    Dear Satish
    Please check the following setting in customizing ,
    T.code OPJ2 -
    Operation for batch determination - 3 ( check during backflushing )
    give SDR as per the business requirement and activate BD indicator .
    For SDR ( Stock determination rule ) use T.code OSPX ,here you can
    sort or can give prioriy .
    Please try this ,otherwise go for enhancement /user exit
    Regards ,
    Vishwas.K
    Edited by: vishwas.k on Mar 9, 2011 5:28 PM
    Edited by: vishwas.k on Mar 9, 2011 5:38 PM

  • Batch determination Problem in process orders

    Dear Friends,
    i am getting problem of BD for components in process order that the FIFO sequence is not
    showing.
    !. I have made settings like Strategy Plant/order type
    2. Charecteristic in the class and sort rule LOBM_VFDAT
    3.  Class assigned to materials.
    4.  raw materials batches have maintained Ex.date, date of produced(at the time of GR by 561)
    5. Order type i have assined search Proc.
    in the order strategy info showing sort rule correctly in theprocess order, But the sequence it showing
    is neither with GRn date or not with Exp date.
    kindly guess what might be the problem...
    Regards
    Robert

    Dear,
    For FIFO you can use the Characteristic  LOBM_LFDAT for FIFO if is LOBM_VFDAT then in plant storage data 1 view maintain the SELD then assign these Characteristic to class in CL02 then assign this calss to material master.
    Then craete sort rule in CU70 withCharacteristic  LOBM_LFDAT or LOBM_VFDAT
    then assign it to serch strategy in MBC1 or COB1 with selction criatoria.
    In OPL8 assign this serch procedure.
    Then create the order and check the result.
    Regards,
    R.Brahmankar

  • Batch number determination from process order

    Dear Gurus,
    I need when I'm receiving on a process order, the batch number is copied from the batch of the process order.
    Regards,
    MaX

    Yes, it is possible depending on the setting of your order type (IMG -> Production Planning for Process Industries -> Process order -> Master data -> Order -> Define Order Type-Dependent Parameters)
    If here, in the combination plant - order type, there is the setting in Process data documentation area on "Batch record required", then batch can not be changed in process order after the release.
    If the setting is in one of the other two options, then you can change the batch after release.
    Bye

  • CPTD - Actual Template Allocation on Process Orders - V.Urgent

    Hi,
    We are doing period closing for June'07.
    We are using Activity Based Costing templates for Overhead allocation.
    While executing T-Code CPTD (Collective processing) for Actual Template Allocation for Allocating Overheads for the month of June, the system is allocating
    Overheads on all Process Orders confirmed till today i.e.it is wrongly
    allocating Overheads for June, on process orders on which there has been
    no production confirmed in June, but the Production was confirmed only
    in July.
    We expected the system to allocate Overheads only on Process Orders on
    which the Production was confirmed in June,07.
    Points will be awarded for providing solution.
    Regards,

    Hi
    I am using environment 9 yes.
    My formula is very simple:
    On Object I have:
    SenderCostCenter = '130570' AND
    SenderActivityType = 'LABORA'
    And then I have simply put "1" in Plan Quantity and Actual Quantity.
    So what it does is it allocates the unit cost of the combination of cost center 130570 and act. type LABORA one time to each material/order no matter lot size.
    Should I perhaps have put "1" into the Plan Fix and Actual Fix instead?
    Thanks

  • Batch Number assigned to Process Order

    Hi Experts,
    Which table should I use if I want to get the Batch number assigned in a process order?
    Thanks,
    Kumar

    Hi,
    If u want to get the batch number of Process Order FG then u can get it from AFPO.If u want item level then get it from MSEG table.
    Regards
    R.Brahmankar

  • Batch determination configuration for process order.

    Hi,
    Can anybody help me to configure batch determination for process order in step by step.
    My requirement is
    1. multiple selection of component in process order.
    2. click on batch determination icon.
    3. system will check batch, valuation type, stock. Assign batch,valuation type, storage location automatically in the process order confirmation(COR6N)-Goods movement tab.
    Thanks,
    Jishu

    Hi Jishu,
    Please refer below documents whcih will help you on batchdetermination
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c09b7216-65da-2b10-bdb5-870cf9916350?QuickLink=index&…
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0caed4a-40f9-2c10-349a-96ec617a8161?QuickLink=index&…
    Regards,
    R.Brahmankar

  • Regarding Batch No Assignment During Process Order Release.

    hi,
    i have one secenario.
    Suppose I have Process Order For material. PH-5000.
    It have 3 material as ingradients.
    ph-1000 - roh
    ph-2000 - roh
    ph-3000 - Semifinished.
    what i want when Process order for Mateiral ph-5000 get released.
    Batch No of PH-3000(Semifinsehd) get copied to PH-5000 batch no.
    Its Urgent
    Is any Enhancement is theri , pls let me know,
    Thanks,
    you can mail me.
    [email protected]

    Dear Mohit,
    If you want to go for external batch numbering during order release then
    - Set no automatic Batch creation in order in T.Code CORY.
    This setting only restrict the automatic Batch Creation in order only.But to fulfill second your requirement of restricting order release or save without assigning external batch no you have to either go for,
    - User exit.Below are the user exits which are trigger at the time of order saving
    PPCO0006 to predefine entries for order header fields when
    an order
    PPCO0001 to provide information at the time of saving (for
    production orders and process orders)
    PPCO0007 to check or change header data when saving
    or
    - Create screen variant using T.code SHD0 and make Batch Field compulsory.
    Regards,
    Dhaval

  • Batch number change after Process order release

    Hi all,
    I would like to know if it is possible to change the batch number after that the process order has been released.
    Actually, the field is grey and not editable anymore.
    Is it customizing?
    Thanks in advance,
    Giovanni

    hi
    if the Batch numbers are generated while releasing the Process order. you cannot change the Batch number. (it will have inconsistency of data)

  • Remove/Clear old reservation against previous process order

    Dear gurus,
    Can anyone please guide me how to remove the old reservation as it is generating Pur.Req due to old reserved items.
    i have gone through MBVR, but was not able to find the proper steps.
    Please suggest some alternatives.
    Thanks in advance.

    Hello
    Transacton COHV is the main transaction for order mass processing.
    You can do TECO and another mass activities on the order.
    BR
    Caetano

Maybe you are looking for