Batch Saving for Web over 10,000 images to their original folder in CS6

Hi all,
I've searched on here for the answer and I'm a bit stumped on how to do this.
I've been asked to help out a blogger who until now has accepted images to their size uncompressed of resized. We've got around the problem of the max image size by using the plugin Imsanity. Which has done a great job however what it doesn't do is resample the images for the web.
Usually if I blog myself, I always save for web but I'm having real trouble, real real trouble creating an action that will save for web to the original folders instead of a separate one.
The thing is that there are so so many images in so many different folders and subfolders these must be modified and replaced ready for reupload.
No matter what, however I approach it, I can't seem to make an action that works!

Russell Brown's Image Processor Pro extension might do it. It has a Save for web option. You can run it for all folders in a folder tree. If folders are not all in one tree you might want a script to invoke image processor pro for each folder set. See <http://russellbrown.com/> and click Scripts, or direct to <http://russellbrown.com/scripts.html>. Scroll down to "Script: Dr. Brown’s Services 2.3.1."

Similar Messages

CS6 Batch Saving for Web

CS 6 Version 13.0
I have got the following issue:
I did create action to save files of a folder for web. Within the action I have defined the destination folder. So far, everything works fine and the files are saved in that folder in much smaller size.
BUT:
When I configure the automation choosing a new destination folder and renaming the files, the following occurs:
- Files are saved in the new destination folder OK
- File size in new destination folder is much bigger compared to file generated by saving to destination folder defined within action !??
Can anyone help me out?

Since File>Save for Web is an export plugin, the files are always saved to the folder path you used when recording the action.
The destination in Automate>Batch doesn't change that.
You would set the Destination to None.
You might fiind it easier to use the Image Processor Pro rather than an save for web action.
(included in Dr. Browns Services 2.3.1)
http://www.russellbrown.com/scripts.html

By saving for web text-layer becomes a image in HTML what is wrong?

By saving for web text-layer becomes a image in HTML what is wrong? In this way I can not use CSS in the editor.

Right click on the layer, Duplicate Layer, set destination to the other image file in the dropdown.

CS6 batch save for web: saving in seperate folders

Hello everyone,
I created a Photoshop action that slices images into singular pixels. Afterwards the files are "saved for web". I created a droplet so that I can use this action on multiple files.My question is: can photoshop save all the images that are created with one action in one seperate folder so that everytime an action is finished a new folder is created?
I don't know if this is very clear. Feel free to ask if you need more information.
Thanks in advance.
Marius

does nobody has an idea?

Photoshop crashes when saving for web and devices

When hitting saving for web and devices, Photoshop starts to render images but before it's done, it crashes. I get an error-popup with no text and the screen where normally the animation is shown is red. Then Windows comes with a crash report and I can only quit Photoshop.
I have an animation of over 150 frames, but just some black and white lines, no color.
I'm using Photoshop CS 5.5 on Win7.
I tried deleting the preferences in AppData/Roaming etc, but no result, still crashes.
My Photoshop is also updated to the latest version.
Help?

Ok, here's a crash report from Windows (not sure which I should post so just gonna post them both..)
Naam van toepassing met fout: Photoshop.exe, versie: 12.1.0.0, tijdstempel: 0x4d90cf71
Naam van module met fout: Save for Web.8BE, versie: 12.0.0.1, tijdstempel: 0x4d90d758
Uitzonderingscode: 0xc0000005
Foutoffset: 0x002d2e96
Id van proces met fout: 0x1f4c
Starttijd van toepassing met fout: 0x01cdb1fca2dd8dcb
Pad naar toepassing met fout: C:\Program Files\Adobe\Adobe Photoshop CS5.1\Photoshop.exe
Pad naar module met fout: C:\Program Files\Adobe\Adobe Photoshop CS5.1\Plug-ins\Import-Export\Save for Web.8BE
Rapport-id: fa9784f8-1def-11e2-a242-00238bb26d31
Photoshop.exe
12.1.0.0
4d90cf71
Save for Web.8BE
12.0.0.1
4d90d758
c0000005
002d2e96
1f4c
01cdb1fca2dd8dcb
C:\Program Files\Adobe\Adobe Photoshop CS5.1\Photoshop.exe
C:\Program Files\Adobe\Adobe Photoshop CS5.1\Plug-ins\Import-Export\Save for Web.8BE
fa9784f8-1def-11e2-a242-00238bb26d31
Where can I find a Photoshop Crash Report?

How can I get PS CC to always load my preferred Preset while saving for web output?

For my purposes, I'd prefer to save all JPEGs at 100% quality while saving for web output. I've made a preset as seen below.
However, PS doesn't always defer to this setting when I begin saving an image for web. Is there a way to make this preset automatically
load every time I open the output to web process? I process a large number of images, and if I could avoid correcting this it would save me a lot of time.
I'm using PS CC on a PC. Any help will be appreciated!

This is the only custom preset I've made with this particular system. So I'd need to delete the pre-loaded PS presets?
I'm a little loathe to remove the options in case they might be needed in the future or for a task other than the primary one described.

PSD files saved for web and devices show up as broken when opened Dreamweaver. How can this be fixed?

PSD layouts saved for web and devices show up as broken links in dreamweaver. Previews in browsers are fine, but I keep getting and error message that says the files have been blocked. What is the fix for this?

You can also try out Project Parfait. It's a new experiment from Adobe that’s currently online and free to try out and use.
It allows easy PSD comps-to code workflows.
Project Parfait (Beta) - PSD CSS Extraction, Measurements and Image Optimization Service for the Web
-Subhadeep

What is the best way to keep high res when saving "for web"

the files i'm saving for web so i can get them in jpg (or gif) format are coming out very pixelated. this is when i print the image.
what is the best way to save for web an image and keep the resolution good.
using for a business card template. avery template will let me attach images i want to the project. to do this.. i "get file from computer" and it drops the image in but real small... then you are supposed to enlarge it onto your work however you want. well when i enlarge this image file, it gets pixelated badly. i'm thinking it's the way i'm saving it. i do not adjust anything when i save. maybe i should. this is where i need guidance.
this is what avery template notes about the images i am allowed to use - When uploading the image, the maximum size allowed is 4 MB. You can only upload JPG and PNG images either as RGB or CMYK. so when you recommend things, can you please keep this in mind
thank you for oyur time.

Aida,
When you save with the default template using save for web it is generally a very low settings.
While in the save window you can define the pixel size of the image you want with quality as well as resolution too.
Refer to tv.adobe.com video save for web or Adobe help file for detailed instructions.
Mandhir

Losing quality when saving for web after using Multiply

I have a normal photograph, with a red layer on top set to Multiply/Darken. When I save it for web, regardless of what pixel size, or what uploader I use the quality is terrible.
Have tried uploading to different services, from difference devices with the same issue, so assume it's a colour profile thing.
Any help appreciated.
Image shows the difference in quality compared to normal.

04dalyj wrote:
I have a normal photograph, with a red layer on top set to Multiply/Darken. When I save it for web, regardless of what pixel size,
DPI is pixel size and images are not displayed on screens with the pixels sized as specified in images resolution setting. The images pixels are displayed on displays with pixels the size the display is run with. So web images display on display, display with different sizes and resolution depending on the users display device.
Images saved for web display should be saved with sRGB colors for many image viewers are not color managed and assume web images have sRGB colors.
So you images will display differently on different displays and no matter how you save them colors will vary displays may not be calibrated all displays do not have the same color capabilities.
The best you can do is calibrate your display and save them with sRGB colors jpeg or png files that display well and look good on your calibrated display.
Most desktop displays are 100DPI resolution displays where newer tablets and laptop have high resolution displays 200 to 300DPI. Even new Desktop 4k display have lower resolution. I believe the highest resolution 4K display in production is the Dell 24: display . Its resolution is 185DPI. Out of production is IBM's old 4K display which had a 204DPI resolution.

Different Colors by "Saving for Web" - why???

hello,
i save pics for the web, incl. profile sRBG.
but the pics look colder - warm colors get lost - in firefox, because ff is not able to use profile (but only with an extension as i know).
safari is able to show the collors correct.
bridge color prefs are set to "for web/europe".
i am choosing "saving for web", and "Incl. ICC-profile"...
any ideas?
thanks
claus

i have no ie (win) here right now, only mac.
but here are some pics/examples:
the original file (incl. sRGB profile, but size reduced in ps3):
http://www.clausinisland.de/images/IMG_6438kl.jpg
(ok in safari, but "cold" in firefox 3)
here we have a jpg by "saving for web...", excl. ICC-profile!:
http://www.clausinisland.de/images/b2222mm.jpg
(colder colors, see the skin color, like the original in ff3)
one more:
http://www.clausinisland.de/images/bild2.png
left: jpg with profile in ff3
right: same pic in preview
hope this helps a little...
i wonder, if others have not similar problems?!?!? what i am doing wrong?
thanks
claus

Grainy text when saved for web

Why do graphics with text and/or images in Fireworks CS5 become more grainy or blury when saved/exported for web use? Compared to results in Photoshop, text, image and graphic rendering when saved for web in Fireworks is lower quality or poor (grainy and blurry). Why?! Should I not use Fireworks and only use Photoshop CS5? Isn't Fireworks designed for creating web graphics? If so, what am I missing? Any help would be appreciated.
Brian

Yeah, I'd encourage you to use whatever works for your situation.
I should have asked you to include a screenshot of your original for comparison. I do see obvious JPEG artifacting around the letters as well as the images; this graphic has a lot of flat color, which would prompt me to try saving it as a GIF or PNG-8 (or even a PNG) instead of a JPEG.
The cover images do look quite blurry, but I suspect they must look blurry in your original as well. Incidentally, if you saved these graphics as symbols, you could resize them multiple times in your layout without losing any quality—kind of like Smart Objects in Photoshop. (I'm assuming they might have been larger initially?) Also, you could check your Preferences to see what Interpolation method is being used when resizing. This could impact the appearance of the cover images, if they are being resized.
Text rendering is tricky at small sizes. Making a seemingly minor adjustment to the pixel size can have an impact on how the text is rendered at this small of a size, depending on the font. As far as anti-aliasing goes, System Anti-Alias can be a good choice, sometimes; you might also explore the Custom Anti-Alias option. You might also have smoother results if you create the layout at twice the size (or more) initially—a display font will look better when rendered with more pixels—and then output it at half size.
An interesting thing about Photoshop: If you zoom in to the highest setting, you can use the arrow keys to create subtle adjustments to the text rendering, depending on what kind of aliasing you've applied.

I upgraded my iPod Touch 4th Gen yesterday. Now it won't play music, which is the main thing I use it for. Over 11,000 songs [it's a 64GB model] -- will I actually have to restore the device and re-add all that music?

I upgraded my iPod Touch 4th Gen yesterday. Now it won't play music, which is the main thing I use it for. Over 11,000 songs [it's a 64GB model] -- will I actually have to restore the device and re-add all that music?
[Music files are still there, and I can play them on my computer directly from the iPod [just one track at a time] but not in the usual way, through headphones.]
On the Summary page of iTunes for the iPod, it shows 50-plus gigabytes of "Other" content and no music, which was not previously the case. I assume this is related to the problem.
I can bring up individual tracks on the iPod and see cover art, but cannot play the music.

iCloud is free, iTunes match is $25 a year.
I had the same problem and when I went to Settings I had 0 songs, even though they were obviously still there since I only had 15GB free on my 64GB device.
I decided to do a complete reset/restore of my 4th gen iPod Touch, Bad move! I've been messing with it for hours, and it simply won't restore--it keeps hanging on a black screen with an Apple logo and a progress bar at about 10%, sometimes it goes completely blank and tries again, with the same result. (I've posted my question/plea for help here: https://discussions.apple.com/message/19735862 )
I'm ready to bang my head against the wall! I can put the device in recovery mode, connect to iTunes on my computer, and get it back to the setup screen, but when I go through the process again and try to do an iCloud backup I get the same reset/restore loop.
I could start from scratch, but I really, really, really don't want to go through all of my hundreds of apps, reinstall them one by one, etc. etc. etc.
I thought that once I started using iCloud, I didn't need to sync with iTunes anymore--guess I was wrong.

Change the default HTML template when saving for web

Hi,
Is there a way to change the default HTML output template when you go to "Save for web" and select "HTML & Images"? I would like to modify the default HTML <head> tag.
Thanks.

Two observations.
First — "Tools-> ...." is specific to Acrobat X and XI. It did not exist prior to Acrobat X.
Second — Acrobat 9 Pro / Standard (nor earlier release) does not support viewing a PDF page containing a scanned image and performing a right-click ... Save Image As.
The context menu provided by Acrobat 9 Pro with a right-click on a scanned image is:
The context menu,from a right-click with the TouchUp Object tool selected, for Acrobat 9 Pro is:
So, to paraphrase what Paul Harvey used to say ... What's the rest of the story?
Be well...

Photoshop PNGs saved for web in CS3 v.10 still are not transparent in iWeb 08 2.0.4

I have read the topics and tried the tricks and still have black backgrounds on my photoshop graphics. After saving for web & devides as png8 with transparency I have a checkerboard pattern behind my graphic. I am using the magic wand tool, selecting the emptiness/checkerboard behind, then choosing to select the inverse, the ctrl c, then ctrl v in iWeb
Thanks for any help.
Kristie

When you use the Save For Web or Devices be sure to click on black in the pallet and then on the transparent "button" just below the pallet before saving as a png file.
OT

Strange white lines sometimes occur when saving 'for web and devices' in Illustrator?

Hi
Strange white lines sometimes occur across my documents, when saving 'for web and devices' in Illustrator CS5 (on the right side of the black logo below). Does anyone know how to avoid this please??
Thank you so much.

LSM,
The link seems broken.

Batch Saving for Web over 10,000 images to their original folder in CS6

Similar Messages

Maybe you are looking for