Batch search strategy for WM
hi,
As per my process order requirement, i converted transfer requirement in to transfer order in warehouse and confirm the transfer order. During conversion the system picks as batch as per FIFO. If there is only one batch there is no problem. if there is more than one batch then, there is a problem during goods issue
When i am doing goods issue for my process order, system picks only one batch. For other batch i have to do one more time goods issue. I didnot do any stock determination during goods issue. What may be problem.
Thanks for your reply.
I already maintain batch split as 999. still it is not taking.
I checked strategy type also. what may be the reason.
kindly explain.
sathish. R
Similar Messages
-
Hi Experts,
I have configured Batch Search Strategy for Transfer posting of consigh goods (311K).
The Batch search is working fine for one plant while it is not for another plant. The msg. says 'The CLASS does not contain any Selection criteria'.
This same CLASS is proposing the batches for the first plant. the selection criteria is 'Consign Stock - type K'
Please advise this is very urgent..
Thanks in advance,
ManjuHi,
Goto OMCE transaction check the batch level here check the batch level where it is activated whether is it at Plant level or Material level or Client level.
rgds
Chidanand -
Batch search strategy in WM material staging
Hello all,
I have a issue of batch determination when I do WM material staging through transaction LP12 & further TO creation through transaction LB13.
We have set a batch search strategy in transaction LS51 for WM/Movement level i.e. for WM02. We have defined a search strategy for movt. type 319 with criteria as Shelf life expiry date is >1 day & defined a sort rule as ascending order. Hence our expectation is that system should automatically search for available material batch with First shelf life expiration date. However, we found that the system is picking up the batch which is having shelf expiration date later than the batch available in system which is having early expiry date. I am unable to trace the cause for this . As I know the batch search strategy for WM TO related setting is in LS51 & we have already maintained the same as explained earlier.
Can anybody help me in resolving this issue? Do you know anything more specific settings required to fix up this problem.
Thanks much in advance for your kind help in this regard.
Parag K.You need to configure WM Stringent FIFO strategy forstock removal in this scenario. Other Strategies for stock removal don't always guarantee that stock is picked in the order of nearest SLED. Please check
http://help.sap.com/saphelp_erp2005/helpdata/en/c6/f845944afa11d182b90000e829fbfe/frameset.htm -
BAPI for the transaction VCH1 and VCH2 (Batch Search strategy)
Hi Experts,
I need to create a new condition record or change a condition records using the transactions VCH1 and VCH2 respectively.
But BDC recording should not be used at any cost (acc to Client).
So next go for me is to search for a BAPI or any Function modules..
Can anyone please help me in this regard.....
Has anyone worked with this transactions before...
waiting for the replys
RajivHi Rajiv,
I have a similar requirement as yours. Could you please let me know if you found any function modules or bapi's to create batch search strategy.
Thanks in advance.
Manohar Dubbaka. -
How do I get the Batch Search Strategy Type in an ABAP program?
Hi Experts,
I have a requirement to filter the Batch Search Strategy Type in a BADI. For example, I have a Strategy Type ZD01 which is a Customer/Material combination. This has been created and checking VCH3 confirms that.
For example, I am implementing BADI VB_BD_SELECTION~PRESELECT_BATCHES and will put the filtering in there. For example, I go to transaction VL01n then create outbound delivery with order reference, in the PRESELECT_BATCHES portion, I will do a filtering that if Batch Search Strategy Type = ZD01, then do some code.
My problem is, I don't know how to retrieve the Strategy Type. I can use the parameters I_KOMKH-KUNNR (Customer) and I_KOMPH-MATNR (Material) of method PRESELECT_BATCHES to retrieve the Strategy Type but I don't know how.
Any tips?Hi Experts,
I have a requirement to filter the Batch Search Strategy Type in a BADI. For example, I have a Strategy Type ZD01 which is a Customer/Material combination. This has been created and checking VCH3 confirms that.
For example, I am implementing BADI VB_BD_SELECTION~PRESELECT_BATCHES and will put the filtering in there. For example, I go to transaction VL01n then create outbound delivery with order reference, in the PRESELECT_BATCHES portion, I will do a filtering that if Batch Search Strategy Type = ZD01, then do some code.
My problem is, I don't know how to retrieve the Strategy Type. I can use the parameters I_KOMKH-KUNNR (Customer) and I_KOMPH-MATNR (Material) of method PRESELECT_BATCHES to retrieve the Strategy Type but I don't know how.
Any tips? -
COB1 Batch Search Startegy for Component in another plant
Is there a way to build Batch Search Strategy (COB1) for components in another plant? We use Batch Search Strategy in PP-PI process orders. If so, what is the configuration?
Resolved in EAM forum
-
Hi All experts,
When i go to LT04 and create transfer order i'm getting error saying
"No batches were selected during the batch search".Any one knows the reason for this .Please guide.Thanks in advance
naikLike sampath has suggested, you have to find out the strategy type you are using for your batch determination strategy and maintain in tht system via tocde LS51thenonly system will find out the batch or of you don't want the batch automatic strategy for this movement then you have to remove from the config for thi mtype.
-
Batch Search strategy -"No search Strategy could be found "
Hi
I have a typical problem while perfoming GI through pick list (co27).I have given the Production Order No and standard pick profile (00002) , it was taking me to batch determination .While clicking on the batch detemination , it is giving me the above massages : No search Strategy could be found .When I am exploring in the "Strategy Information " , it is not showing me any Sort Rule " SORT_BY_Batch" .I want this to be populated by defauly while clikcing on the Strategy Info.
Can any body give an idea .
Regards
JiaHi Jiaul,
I got your problem.
U r tyring to do batch determination for pick list. But u have defined the batch search strategy in COB1 which is for batch determination for process orders ( in component overview).
U need to create the search strategy using MBC1 (use strategy type ME01 , Plant, material, mvmnt type). This triggers the batch determination in inventory management, which is ur requirement.
Maintain the search strategy for thsi combination ( give the movement type ( for ex. 261) which will be used while u execute the pick list)
Please get back after trying out this.
Thanks & regards
Mahesh
Edited by: Mahesh Babu MG on Jan 30, 2008 10:00 PM -
Batch search strategy based on goods receipt date
Hello,
Can some one help me with setting up Batch search strategy based on goods receipt date currently is on batch number.
Thanks a lot
Thanks!
Best Regards
SrwHi
If you want to set up Batch search strategy based on goods receipt date......then you have to create GR Date as one charecteristics in T.Code: CT04 and assign this charecter in Class with respect to class type 023
Then assign this class in Material Master Classification view..
Make sure in Material master, Purchasing view...you have activated Batch management active check box....
Then when ever you do GR in MIGO, In batch tab, In classification field maintain the GR Date..
Then Create sort sequence in T.Code: CU70 and you can maintain in what basis ie)in assending or desending GR Date you have to search the batch..
And then Create Batch Search Statergy in MBC1 and there you assign the sort sequence in Details...
Now you do your regular procedings.....the material Batch will be searched based on GR Date...
Reward if useful
Regards
S.Baskaran -
Strategy Types in Batch Search Strategy (Process Order)
Hi Expert,
What are the difference between the strategy types - Order type/Plant/Mat, Order type/Plant, Prod Material?
For Order type/Plant combination- If my criteria is to do automatic batch determination at process order release against the sort rule characteristics (LOBM_LWERT) GR received date. I maintained LOBM_LWERT in all material classes, now in selection criteria which class I will choose as different materials contain different class in the class type 023.
I am confused.
In case of Order type/Plant/mat- number of master data is huge.
Pls suggest
KrishGot answer.closed
-
Assigning Batch search strategy to material-batch key
I am facing one strange problem. I am creating process order in COR1 for my finished goods FIN1. I have maintained BOM for FIN1 & assigned Semi finished goods SEM1, SEM2 as a BOM component.
I have maintained enough stock of SEM1in batches. Now i am releasing my process order. For component SEM1, the system is automatically assigning the batch number
I have noticed in my process order, for component SEM1 has 2 items, the batch key is as "2" (sytem automatically sets this value) but also has ths same component item, the batch key is as "1", required quantity is 0
Why? What is the importance of this "Batch Key"?
Please guide me
Thanks
leeDear,
You have define Batch Strategy with number of splits "say 99", so that system will allow 99 splits for a component while Batch determination.
This is a definition basically for a combination of condition type and access sequence in COB1 you can check in COB3
Suppose materail
SEM1 required quantity is 100 and you have three batches say 50, 70 20,
So system will pick up two batches batch key is as "2"
If requirement quantity is more than 120 then system will paick up three batches and batch key will be "3"
SEM2 there is no requirement of quantity so system showing the batch key is as "1"
Please refer my reply from this thread,
Material Availability check
Hope clear to you.
Regards,
R.Brahmankar -
Hello Expert,
We have a rise in the number of COGI errors in our client plants.when we upgrade our system for R/31 version 4.6 to ECC 6.0. we have always have COGI error for certain material component when the confirmation came across even though we have several different batches on inventory.Confirming a production order it would select the oldest batch and consume it but if the oldest batch did not have enough stock to fulfill the amount it would go to the next oldest batch. Could have been changes happen in the functionality behind in my client batch strategy? how could i fix and located this problem? and can it also affect when ever we do material substitution in BOM component?
Please guide and help.
Thanks
RyanHy Ryan,
BATCH MANAGEMENT-BAckFLUSH,
Your Materials are Back flush that means you are doing goods issue with Confirmation.
Now Batch Determination for Components can be done via 2 ways
- as Mr. Brahmankar said MBC1 (Plant , Material / Material Type , Movement type) for this you have to do Batch Determination in Goods Movement screen of Confirmation.
- Secondly with COB1. In this you have to do Batch Determination in Order itself.
Now first rectify which strategy you are using currently.Whar ever it is COB1 or MBC1.My doubt is if you are using Combination with Material (Not Material Type) in that case you have to update your strategy with all the Materials for which Batch Detrmination is required.I guess rest of the settings are OK because you had already clarifies that for some of material it works.
Regards,
Dhaval -
Search strategy for JSP tag files
Hello everyone,
I've been trying to find a solution to this for some time, but couldn't find a clean one. Maybe somewhere here has any ideas for a solution...
Consider a JSP taglib which is composed of hundreds of .tag files. The library is referenced in JSP using the "*tagdir*" option of the taglib directive, which simply points to /WEB-INF/tags/ (where the .tag files are located).
Our standard server software distribution includes that tag library, as well as JSP pages that make up the server's web user interface. Those JSP pages use the taglib extensively.
Now, we want to be able to distribute upgrades to the JSP pages and the tablib, but allow customers to easily customize some tag files without worring about loosing their changes if they apply a future upgrade.
If it were possible for JSP pages to declare two overlapping taglib directives (same prefix) pointing to two different tagdirs, it would allow us to place our hundreds of .tag files in one "standard" directory, and allow customers to place customized .tag files in another "customized" directory. That way JSP files would always use the same prefix for our tags, but the actual .tag file inserted would be coming either from the customers's "customized" tagdir or from our "standard" tagdir (depending if they chose to override a tag with a customized version or not).
Is this possible? How do people deal with taglib customization and maintenance issues?
Thank you!Thanks for the reply!
We use the ClickOnce smart client deployment to the user's machine and we would not want to touch/change anything on the user's machine. So, we can't rely on an environment variable being set.
It almost seems that the DB Support Team has to not only talk to the Tech Support team and arrange for deploying the right version of the tnsnames.ora file on their users machines, but also talk to the App Deployment Team and provide the most recent version of this file to be used for deployment. So I guess if this file is checked in a code repository, the DB Support team can notify the Tech Support Team and the App Deployment Team to refresh respectively all user machines and application deployment configuration files.
Alternatively, as one of the app deployment instructions of App Deployment team can be: "check out the most recent version of tnsnames.ora from the repository before deploying the application".
Any thoughts?
Thanks.
Regards,
gkk1969 -
Batch Strategy for Production orders
Hi All,
I just wanted to find out that what are plant specific settings while implementing the batch determination strategy for Production orders? I have configured Batch determination and batch check for Plant A and Plant B. However, in Plant B, the system does not pick the batch automatically while in Plant A, it does. I have checked almost all the batch settings in SPRO but could not find any differences between plant A and plant B. Can anyone please guide me on this>?Hi,
Pls. check in SPRO > Logistics general > Specify batch level and activate status management.
SPRO > logistics general > Batch number assignment > activate internal batech number assignment
Sachin -
Batches not getting for order components at time of order creation
Hi Folks,
My requirement is that when I create a production order and save automatic batch determination should take place for all components. For this I have done all the settings for eg
1) Assigment of batch search proceduree to order type
2) Define batch search strategy,procedure , condition , access sequence
3) Create batch strategy record for order type/ plant/component by COB1
4) Create sort rule and assign to batch strategy record
5) Batch classification is there and value of the sort chracteristic is populated in all batches
6) There is enough available stock in the batch at that storage location
But batch field is not getting populated .. Even if I press the batch determintion button manually
on the component overview screen batch selection screen is appearing but no batches are getting determined for selection .I have checked the selection criteria and it is correct and I was expecting batch 'ZSWETA' to b determined as it is satisfying the selection criteria. I am really wondering why this is happening as I have done all the required config settings but batch determination is not happening..
Can you please help me out of this...
Regards
SuchandraHi,
kindly check the following things-:
Material master -: Purchasing View tick in check box of Batch Management
MRP 2 -:Batch Entry(Select 3-Auto Batch entry on Release)
Work Scheduling -: Batch Entry & Batch Management.
hope it will help you to get the auto Batch Number.
Regards,
Mukesh
Maybe you are looking for
-
Firefox could not install this item because "install.rdf" (provided by the item) is not well-formed or does not exist. Please contact the author about this problem. The statement above is in the pop up error box every time, when I launch Firefox. If
-
Unable to import the views in RPD.
Hi, Case1:Unable to import the views in OBIEE 11g by using "Oracle inOraDb 11g_Home1" drivers but able to import the Tables in RPD. Case 2:Unable to import the Table in OBIEE 11g by using ."Data Direct 6.0 Oracle wire protocol" drivers but able to im
-
White Screen , Tried Hard Reset / Restore.
I opened my ipod touch but after i put it back i got a white screen and i tried everything from hard reset to restoring the ipod. please help. i never tried draining the battery but i am not sure how to do that with the screen white. Please HELP!!! B
-
Exchange 2010 - Moving mailbox database from exchange 2010 server to another exchange 2010 server
Hi, I have a current existing exchange server running on 2008 R2. apparently the partition that holds the mailbox database is getting full and i need to move some user mailboxes to another environment ( exchange 2010 running on 2008 R2). i transferre
-
can ios 5.0.1 (9A406) install on my ipad 1, (9A405) causing no sim card detectted............. HELP ME