Batch selection in production order compoent overview

Dear Friends,
when i see production compoent view ,inwhich there is selection for storage location & batch.
when F4 for storage location field ,i get storage location available qty
but when F4 in batch selection field,i dont get batch available stock,just showing batch number
How can i get batch numebr along with storage loacation qty & also if batch have classification values
how can i see them with batch stock
We dont using batch determination.
Thanks in advance
Umesh
Edited by: umesh kadu on Nov 23, 2010 4:01 PM

Hello Umesh,
you can create a special search help using a view on MCHB structure, selecting only those records with CLABS > 0 eg. View: Z_MCHB_F4HELP with fields MANDT. MATNR, WERKS, LGORT, CHARG, CLABS, MEINS and condition CLABS > 0.
Then create an elementary search help using this view and add it to the collective search help MCH1.
If you press then F4 on the batch you can choose the new search help and select the batch of the materials with stock.
Best regards
Rabanus Diehl

Similar Messages

Batch Determination in Production Order Component Overview Screen on the basis of FIFO, Thickness, Grade, width etc.

I am facing a difficult scenario. Pl. help me out. In my Business Process I am assigning Batches in Production Order Component Overview Screen. Here I am assigning relevant batches to BOM Components manually, My Management want SAP to suggest batches automatically on FIFO basis, thickness, grade, width & first batches should automatically assign to Production order. Can you pl. tell me how to configure this scenario.
Or can I pull stock overview screen at Production Order Component screen to assign relevant batch to BOM Components
Once batches assigned in Production Order component screen cannot be changed. It can be changes by specific persons only.

Hi,
Automatic Batch Determination for production order components is possible by configuration.
You can also refer below discussions to map your scenario.
Batch determination in production order | SCN
Automatic Batch Determination in Production order
Regards,
Naresh

Automatic Batch Determination in Production order

Dear All,
We are using automatic batch determination is based on FIFO (first Mfg first out) for components..After releasing the order.
I have maintained Batch Class in all the materials which are used as a all material special Characteristic LOBM_HSDAT as a one of the class characteristic. as we want batch determination on GR date for few material and for few material LOBM_VFDAT for self life material and its class.
Then create Sort Rule CU70 mainatained the same LOBM_HSDAT in it. and one with LOBM_VFDAT.
Then create Batch serch Strategy (USE T.Code COB1- search strategy CO01the respective sort rule and selection critoria.for All ROH HALB and Finish material.
In Material Master of all component in MRP 2 view select value 3 (Automatic Batch Determination) for BATCH ENTRY. All ROH HALB and Finish material
After mainting above all prerequisite I should able to do the Automatic Batch Determination as per my selection Rule.
But Automatic Batch Determination in Production order after release is not working.
Please need your help.
Regards,
Manish
Edited by: manish gurnule on Dec 30, 2008 5:26 AM

Dear,
Define the batch determination search strategy for process order in COB1 with sort rule in CU70.
On the initial screen of your application choose Logistics>centrel function>batch management>Batch determination>For process order -->Batch search strategy --> Create.
On the initial screen of your application choose Batch search strategy -->Create.
Choose the strategy type, say choose co02
Choose the key combination-
Enter the required dat-->say plant ,production order type, product,valid from and component for which you want to have this
Choose Selection criteria push button. Choose a sort sequence.
If no values have been entered, enter the selection class and the characteristic values.
Go back to the screen on which you create a batch search strategy.
Choose Sort if required(it should be defined earlier(in CU70- here you are giving the charateristic name on which you want to sort)
For component you need to use MBC1 with search stratgey as ME01 for your plant movement type and material and assign the sort rule and search procedure here.
Check also in COR4, for the combination of plant and order type...you have selected search procedure-CO0001
Batch management> Batch serach procedure allocation and check activation
T.Code to be looked specifically OMCG , CORC
Hope it will help you.
Regards,
Madhu

Sequence Selection in Production Order

Hi All,
I am having following problem related to the sequence selected in production order...
In my scenario there are multiple sequences in a routing for a material.In the production Order Type I have made setting of manual selection of sequence while creation of production order.When I create production order the system ask for selection of the alternate sequence and after selecting the alternate sequence the system copies all the data related to that sequence <b>But</b> when I go and see the operation overview the system still displays the standard sequence. How can I correct this problem because when I am doing confirmation the system throws error message than the standard sequence 0 does not exist.
Please help me correct this problem.
Regards,
Anup Dubey

Hi,
As i have mentioned the system is asking me select alternate sequence it means that the tick is there.
Please lemme know why the system is displaying the standard sequenec in operation overview though all the details related to operation are of alternate sequence.
Regards,
Anup Dubey

Query on Batch Determination in Production Order

Dear Gurus
I have one query on batch determination in production order against the scenario given below, which need your help .
We know that it is possible to allocate the same component batch to two concurrent production orders at the same time in SAP. But as per the business requirement its not possible physically. So business want to update the batch selection logic to exclude the already allocated batch to any open production order.
In my understanding it cant be done without any enhancement, but require your expert opinion before coming to any conclusion.
If you have any idea to achieve the solution kindly let me know.
Thanks

Dear
I am not sure whether you can change the Batch SELECTION logic for concurrent production order .As far as I know batch selection is done on Batch search strategy /sort Rule
Explore SAP Help : http://help.sap.com/printdocu/corePrint46c/en/data/pdf/LOBM/LOBM.pdf
Refer this useful thead from expert :Userexit in Batch determination and external number ranges for batches
Regards
JH

Production Order Component Overview

Hi All ,
Could you please guide to understand the following will be grateful.
In the production order component overview screen-MENU BAR is having following list
Order, Functions, Edit, Goto, u201CCOMPONENTu201D, Environment, System, Help.
In the above, if you left click the COMPONENT option there will be drill down option, in that there you have u201CCharacteristic Value Assignmentu201D
u2022 What is the functionality of this option (u201CCharacteristic Value Assignmentu201D) ?
u2022 If I select the BOM component in the component overview and I left click the COMPONENT option in the menu bar and select the u201CCharacteristic Value Assignmentu201D what will happenu2026.
Thanks in Advance....

Hi ,
This is for the Component selection according to the Characteristic Value it will take you to Class to which Characteristics are
assigned , say if your component selection based on the characteristics value say if your Hardness of the Raw material is
99% based on that your Yield would vary for the Finished Product .
You have created MIC 's with Hardness with characteristic value 95% , 96% , 97% and 98% etc....
Your Quality lab has given test value for this component as 99% so your component selection will be this characteristic value
as master data .
Assign Characterisctics to Class , Assign class to class type 023 / 022
Regards,
Jayavimal

Automatic batch management for Production order receipt

Hello ,
I have a requirement to setup & activate Batch Management only for Production order Good Receipt . I am looking out for what all configuration / data setup will be required to complete this .
To start with I have following questions .
1. Whether such activation is possible only for Production order Good receipt - 101 mov.type
2. IF yes , is Batch management activation status be at material or plant level .
3. As I need automatic assignment , should I be selecting Internal batch management .
4. What should be selected for valuation for Goods movement in Inventory management.
5. Is it necessary to have batch determination by maintaining Condition tables / Access sequence
6. What would be standard Class / characteristics to be maintained for automatic determination.
Also I will have to work with the running system where Material are already active and have stock in system . What precautions will I have take if I have to activate the Batch Management in a running system.
Appreciate all your expert advise.
Regards,
Lawrei

Thanks Adler for your comments .
With reference to your point , need further clarifications
1. If batch management is selected to material , this means that it will be active for all movement types for Inventory and cannot be restricted to 101 mov.type .
I see that in config node
+Define Batch Creation for Goods Movements+
    +Using this function, you can define for each movement type whether a new+
    +batch is created for a goods receipt and how it is created.+
Can I not restrict batch creation only for 101 movement , but again here I don't have options to select only for Good receipt for order - Tran/Ev type - WF .
& what about below config node
+Define Batch Creation for Production Order / Process Order+
    +In this step you can make the following settings in batch management for+
    +the existing production control profiles:+
Is it possible in this node .
Please advise.
Regards.
Lawrei

Filter for batch determination of production order

Filter for batch determination of production order
Dear guru ,
We trigger batch determination manually for every production order using CO02.
How can I understand whose are the production orders arenu2019t taking place batch determination?
Checking all the production orders is too heavy ?
Does exist a massive transaction (coois or others) where I can select the production orders with components not assigned to the batch ?
Thanks in advance

Hi
In COOIS > In the initial screen select Documented Goods movement in the list Field along with and other selection criteria and run the Report
In the list of orders > Expand corresponding order to view Documented goods movements list with the components with and w/o batch numbers
Regards
Brahmaji

Batch split in production order confirmation

Hello
any body please suggest me how to map collective batch split during production order confirmatio.
i am using t.code CO11n.
in goods movement i am having qty as 2000 kg.
In this 200kg i want split in to 100 batches as 20 kg each. my client wants to put no batches it should automatically divided 2000kg and need to split 100 batches in to each 20 kg. how can i map this. is there any function module in our SAP.
Please suggest any body on this.
Thanks & Regrds
Bhakta

Hi Onat,
Thanks for ur reply.
I want to split GR101. actually. i have shown individually to my client means select line item and split one by one. but theey are saying that 200 times to do this is not possible. please suggest ow resolve this.
Thanks & Regards
Bhakta

Automatic capture of batch number as production order

Hi,
How to make the order number to capture automatically while confirming the production order.As it should pick the order by default in the goods movement screen.
Abap coding and user exit to perform this.
Regards,
Deepak GS

Hi,
Batch determination uses characteristic values assigned to batch classification for sorting batches and make a selection. A series of customization steps should be completed for batch determination. You will have to learn by reading SAP help or threads throughout this forum. Check out threads below.
[Batch Determination within Production Orders;
[Automatic Batch Determination;
narainmech wrote:
> But for GR it is ok, if this is required for the child item level , while doing the confirmation when the issue is happening in bith cases 1. BAckflush 2. Manual issue
>
> Here in both the case it should pick the batch automatically.
According to which criteria do you want batches to be selected, order name? Are there batches in the system named after production order for components of the order? No matter what, selection must be based on batch characteristics.
Regards.

Multiple batches for a production order and mapping with components

Hello Gurus,
Our business requires to create multiple batches for one production order + they want to trace which component in the production order has been issued to the main equipment.
For example, I am creating production order for 'A' equipment for 4 qty. Business wants to create 4 different batches for these equipment
Lets say now 4 batches are created A001, A002, A003 and A004.
Now lets assume 2 nos of 'B' component are required for 1no of 'A' component. So the requirement of B component is 8.
Lets say 8 batches are generated B001, B002 ......B008
Now lets say batch B001 and B002 are issued for A001 and packed together. How do we map this?
I understand we can do some enhancement for creating the multiple batches but I still dont know how to map them with each other.
Please help

Hi Ethan
There is a functionality called WIP batches, that allows you keep the batch traceability within an order.
With WIO batches you can track which batch of component was used to produce each batch of finished product.
See this link for more details:
Work-in-Process (WIP) Batch - SAP Library
BR
Caetano

Batch management in production order for WM managed components

Hi Experts,
Iam having WM managed components in my production order which are batch managed as well. I have to do batch determination for these WM managed components.
I would like to know the steps involved in it and the required configuration.
Can anybody throw some light on this please
Thanks & Regards
Enrico

Enrico,
For setting up Batch determination in production order please follow
[Batch determination in production order|http://help.sap.com/saphelp_470/helpdata/en/25/283c3f4f7811d18a150000e816ae6e/frameset.htm]
http://help.sap.com/saphelp_470/helpdata/en/25/283c3f4f7811d18a150000e816ae6e/frameset.htm
As far as WM managed components it will still be the same as WM transfer order is created only after goods movement document is posted.
Hope this helps. Else please come back.
thanks,
Ram

Issue regarding Batch determination in Production order as per Expiry date.

Dear all,
first of all happy Navratri.
I have issue regarding batch determination in production order.
I have to compare P.O header materialu2019s expiry date and issuing components expiry date at the time of batch determination.
lets take example, Material having self life is u201CXu201D years and batch determination against PO is based on FEFO with the help of self life we can determine Expiry date of manufacturing material suppose it is u201CYu201D I have to introduce restriction at the time of good issue if expiry date of issuing components u201CZu201D is less than expiry date u201CYu201D.
Please give your valuable suggestions either standard or through SAP enhancements.
thanks & Regards
SIVA

Dear
Thanks for your reply, i am layman about batch derivation can u elaborate it.
Thanks & Regard

Automatic batch determination with fixed batch number for production order

Hello all,
I want to create a production order where the batc number can be assigned for one component as Batch fixed value once the order is released.
1.- I have created the characteristic (CT04) assigned to the table MCHA and field CHARG (Batch number) and one value: LINER.
2.- I have created the class (CL02) and assign to this the characteristic.
3.- I have created the sort ZSORT and the batch (MSC1N).
4.- I have checked the classification in the material and it has assigned correctly the class and characteristic and the MRP2 view has the backflush = 1, batch entry = 3 and the prod. stor. location = COIL.
5.- I have created the strategy (COB1, strategy type CO02) and assigned the selection criteria and sort.
6.- I have created the order (CO01).
7.- I was releasing the order and the batch number was assigned but, with numbers!! and I need assign this with fixed value = LINER.
Could you help me please? How can I do it?
Kind regards,
SP
Edited by: SANDRA PALOMO on Mar 15, 2011 11:28 AM

Hi Vishwas.K
Thank you for your respone, but, doing more researching, let me explain you with more detail:
1.- I am going to the transaction CO02 in order to release the order, but, before it, I am checking the component by Go to > Overviews > Components.
2.- Then, I am selecting my component and making a click in "Batch determ. " button.
3.- The system is showing me many batch numbers and I select the "Selection criteria" button and the system said: "Selection class "LINERBATCH" does not contain any selection criteria". But, it has a characteristic that I have created before.
4.- Then, I select in the new screen "Selection criteria: Origin..." the"create" button.
5.- The system selection my class from the material classification and when I go back to the last screen, finally the system is showing me my batch: LINER.
Do you know why my selection criteria with my selection class is not working in automatic?
Thank you for your time and support.
Kind regards,
Sandra Palomo

Reset Batch Determination in Production Order

Dear PP experts,
I've done the batch determination for component in production order successfully.
My question is if it's possible to reset this batch determination ?
Can anybody tell me how to do it??
Thanks,
Helly

Hi,
In Pord order - comp overview , when you select the component and trigger batch determination , it will lead to the Batch determination screen - there you select Batch determination - Original situation .
This will reset the batch determination.
pls try.
Regards,
Sheik

Batch selection in production order compoent overview

Similar Messages

Maybe you are looking for