Batch session error message

hi expert,
when we run the batch sesion we met the below message
Field BSEG-LZBKZ. does not exist in the screen SAPMF05A 0332 FB01 10 SAPMF05A 0332
Transaction error the invoice didn't post to the sap . But when is checked the screen we have the value to the filed bseg-lzbkz, it's makes me confuse on this. Appreciate throw you lights on this.
thansk in advance

Hi,
Please go through TCODE SHDB , do recording of the tcode and create program from that ( by selecting the recording and clicking on PROGRAM button).
CHECK whether the ORDER of OK_CODES match with your program OK_CODES.
Thanks and regards.

Similar Messages

In which tables are batch input error messages logged?

does anybody know in which table are the batch input error messages logged?
I have to display the error messages which have occured during the transaction
I tried to find out, but i could see only the table BDCMSGCOLL, this table has only the Batch input message number and not the message itself?
does anybody know about the batch input error messages?

hi,
check the sample code below.
messtab is of type BDCMSGCOLL.
Call the transaction and then use T100 to get the message.
DATA: l_mstring(480).
call transaction using
REFRESH messtab.
CALL TRANSACTION tcode USING bdcdata
                   MODE   ctumode
                   UPDATE cupdate
                   MESSAGES INTO messtab.
l_subrc = sy-subrc.
SKIP.
LOOP AT messtab.
    SELECT SINGLE * FROM t100 WHERE sprsl = messtab-msgspra
                              AND   arbgb = messtab-msgid
                              AND   msgnr = messtab-msgnr.
    IF sy-subrc = 0.
      l_mstring = t100-text.
      IF l_mstring CS '&1'.
        REPLACE '&1' WITH messtab-msgv1 INTO l_mstring.
        REPLACE '&2' WITH messtab-msgv2 INTO l_mstring.
        REPLACE '&3' WITH messtab-msgv3 INTO l_mstring.
        REPLACE '&4' WITH messtab-msgv4 INTO l_mstring.
      ELSE.
        REPLACE '&' WITH messtab-msgv1 INTO l_mstring.
        REPLACE '&' WITH messtab-msgv2 INTO l_mstring.
        REPLACE '&' WITH messtab-msgv3 INTO l_mstring.
        REPLACE '&' WITH messtab-msgv4 INTO l_mstring.
      ENDIF.
      CONDENSE l_mstring.
      WRITE: /4 messtab-msgtyp, l_mstring(250).
    ELSE.
      WRITE: /4 messtab.
    ENDIF.
ENDLOOP.

An error occurred while executing batch. Error message is: There is not enough space on the disk.

Hello all,
I execute a T-SQL query, which will retrieve large amount of data, however, I get an error message after a few seconde.
The error message is :
An error occurred while executing batch. Error message is: There is not enough space on the disk.
Who can tell me the reason and waht's the steps to solve this issue ?
Really thanks.
Thanks, Jed deng

The other two posters suggested that the problem with tempdb or you data/log files. This is not the case here. The error message relates to the client-side of things. Apparently SSMS needs to store data on disk. I don't recall exactly when this happens,
but I seem to recall that the files appear in you %TEMP% directory.
I would suggest that your correct action is to clean up the disk. Not the least there may be a lot of junk in your %TEMP% and %TMP% directories.
Erland Sommarskog, SQL Server MVP, [email protected]
Thanks Erland, I was not aware of this earlier. Now, I am able to find out one of the resons for slowness of SSMS gird. Also, I have just checked it with process monitor, SSMS is creating tmp%.tmp files..
- Chintak (My Blog)

Batch Job Error Messages

Hi Gurus,
I have a program with rounddown quantities in deliveries notes. This program is run in background with all other programs. When we checked the batch job error log, we found out that when it gets to this Rounddown program, there are some SAP generated errors messages (examples are listed below).
This issue is there is no way to know exactly which deliveries the error is generated from and if the program actually rounddown the quantities of all the deliveries passed to it and so on, because this error messages are not specific enough (like we can see below).
This program passed this new rounddown quantity number from the internal table using a BAPI.
Is there a way to change this SAP generated error messages to be specific enough like stating which actual delivery number is been affected or even stop at the error and send an email to the user to change the delivery or something in that manner, OR is there a way we can replace this SAP generated error messages with our own messages and send email out to the user.
Error Messages:-
01/16/2008 01:40:40 Step 005 started (program ZSDSO_DELIVERY_QTY_ROUNDDOWN, variant , user ID AUTOSYSUSER
01/16/2008 01:51:35 Item 000020 belongs to delivery group 001
01/16/2008 01:52:13 Item 000020 belongs to delivery group 001
01/16/2008 01:52:15 Item 000030 belongs to delivery group 001
01/16/2008 01:52:19 Item 000020 belongs to delivery group 001
01/16/2008 01:52:29 Dynamic credit check has been exceeded                              23,984.52 USD
01/16/2008 01:52:30 Item 000020 (change quantity manually to             400 PC because of complex struct
01/16/2008 01:52:30 Item 000030 (change quantity manually to             400 PC because of complex struct
01/16/2008 01:52:30 Quantity correlation for dependent items has been carried out
01/16/2008 01:52:30 Item 000020 belongs to delivery group 008
01/16/2008 01:52:30 Item 000030 belongs to delivery group 008
01/16/2008 01:52:31 Dynamic credit check has been exceeded                              23,984.52 USD
01/16/2008 01:52:32 Delivery quantity must be entered for the item
01/16/2008 01:52:34 Dynamic credit check has been exceeded                              23,984.52 USD
01/16/2008 01:53:05 Item 000020 belongs to delivery group 001
01/16/2008 01:54:40 Dynamic credit check has been exceeded                              15,501.88 USD
01/16/2008 01:55:53 Item 000020 belongs to delivery group 001
Thanks.
Points will be awarded.

This is the Subrouting Form code.
FORM call_bapi_delivery_change TABLES p_i_lips LIKE i_lips.
DATA: w_header_data TYPE bapiobdlvhdrchg,
        w_header_control TYPE bapiobdlvhdrctrlchg,
        w_delivery TYPE bapiobdlvhdrchg-deliv_numb.
DATA: i_item_data TYPE STANDARD TABLE OF bapiobdlvitemchg,
        w_item_data TYPE bapiobdlvitemchg,
        i_item_control TYPE STANDARD TABLE OF bapiobdlvitemctrlchg,
        w_item_control TYPE bapiobdlvitemctrlchg,
        i_return TYPE STANDARD TABLE OF bapiret2,
        w_return TYPE bapiret2.
LOOP AT p_i_lips INTO w_lips.
    w_item_data-deliv_numb = w_lips-vbeln.
    w_item_data-deliv_item = w_lips-posnr.
    w_item_data-material = w_lips-matnr.
    w_item_data-batch = w_lips-charg.
    w_item_data-dlv_qty = w_lips-lfimg.
    w_item_data-dlv_qty_imunit = w_lips-lfimg.
    w_item_data-fact_unit_nom = 1.
    w_item_data-fact_unit_denom = 1.
    APPEND w_item_data TO i_item_data.
    CLEAR w_item_control.
    w_item_control-deliv_numb = w_lips-vbeln.
    w_item_control-deliv_item = w_lips-posnr.
    IF w_lips-delete NE 'X'.
      w_item_control-chg_delqty = 'X'.
    ELSEIF w_lips-delete EQ 'X'.
      w_item_control-del_item = 'X'.
    ENDIF.
    APPEND w_item_control TO i_item_control.
ENDLOOP.
w_header_data-deliv_numb = w_lips-vbeln.
w_header_control-deliv_numb = w_lips-vbeln.
w_delivery = w_lips-vbeln.
CALL FUNCTION 'BAPI_OUTB_DELIVERY_CHANGE'
    EXPORTING
      header_data               = w_header_data
      header_control            = w_header_control
      delivery                  = w_delivery
TECHN_CONTROL             =*
    TABLES
HEADER_PARTNER            =*
HEADER_PARTNER_ADDR       =*
HEADER_DEADLINES          =*
      item_data                 = i_item_data
      item_control              = i_item_control
ITEM_SERIAL_NO            =*
SUPPLIER_CONS_DATA        =*
EXTENSION1                =*
EXTENSION2                =*
      return                    = i_return
TOKENREFERENCE            =*
IF sy-subrc EQ 0.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
      EXPORTING
        wait = 'X'.
    w_zbdcopendn-otce706 = 'X'.
    MODIFY i_zbdcopendn FROM w_zbdcopendn TRANSPORTING otce706
    WHERE delivery EQ w_deliveries-vbeln.
ELSE.
    CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
    DELETE i_zbdcopendn WHERE delivery EQ w_deliveries-vbeln.
   DELETE i_deliveries WHERE vbeln EQ w_lips-vbeln.*
    w_bad_delv-vbeln = w_deliveries-vbeln.
    APPEND w_bad_delv TO i_bad_delv.
ENDIF.
ENDFORM.                    " call_bapi_delivery_change
Thanks again.

Batch split error message: Item category not defined

Hi gurus,
I'm trying to use the batch split in an inbound delivery but I get the error message of the subject of this thread while saving.
Could you bring some light here please?
Many thanks,
Marc

Issue found.

Clearing/downdating stock (with batch numbers) error messages

Hi,
We are trying to clear down some stocks with batch numbers and have tried MB1A LT01/LT10. However, we get the following error messages (all individual);
Deficit of BA Unrestricted-use (Deficit of BA Unrestricted-use 56.855 KG : 4589 BP01 0088 0000199415)
Storage unit 4000289374 is not consistent with other transfer order data
Showing zero for stock & cannot clear transfer order
How can we clear the stocks please?
Thanks
Keeley

Deficit of BA Unrestricted-use is a pure MM message.
It just tells you that you have no stock of the mentioned batch 0000199415 of material 4589 in plant BP01 at storage location 0088.
check in MMBE where or in what status your stock of this batch is, then change the fields in MB1A accordingly.

Batch Session Errors Notification Program

Does SAP provide a program which will notify users if a batch session has errors? I am looking for something which would send an e-mail or something, if I gave it the session name and the users to notify.
I guess it would be some kind of Batch Session Monitor Program.
thanks

I dont think a standard program is available .
the log details you can get from apql table, build a custom program for your requirement.
Check the where used list of apql table for any Fm's available.
For getting the log refer link:[Program To Download Batch Session Log|http://www.sap-basis-abap.com/abap/program-to-download-batch-session-log-into-excel.htm]

Batch process error message

Hi there
Last time i used photoshop everything was fine. and then all of a sudden none of my custom actions work with a batch process. a message keeps coming up saying
"the command "image size" is not currently available"
If i click continue it pops right back up saying the same but for the next process and again and again with every process in my action.
It does this on any photo and with any custom action i have saved
Interestingly if i just open the photo and click play on the action without going through the batch process... it works fine.. so its nothing wrong with my actual action.
Has there been a bug introduced with a live update along the way?
Its very very annoying as i regularly batch process 100s of photos for the web and now im having to do them 1 by 1!!
thanks in advance for any help.
how can i roll back an update in photoshop??

Photoshop does not have a live update so your problem must be with something else.
Geoff.

[Solved] [KDE] Cannot open ConsoleKit session error message on startup

Hi all,
I've just installed updates on my system, and I now get a popup message along the lines of "Cannot create Consolekit session. Process /usr/lib/dbus-1.0/dbus-daemon-launch-helper received signal 5"
The corresponding message in ~/.xsession-errors is:
"Cannot create unix session: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ChildSignaled: Process /usr/lib/dbus-1.0/dbus-daemon-launch-helper received signal 5"
Any idea what might be going on? I have checked, dbus seems to be running. Other than that, the desktop seems to work normally.
Last edited by lardon (2012-04-13 08:14:36)

I've just spotted (probably) related messages in the output of dmesg:
[ 3895.854306] console-kit-dae[3668] trap int3 ip:7fe3409f0143 sp:7fff81adc430 error:0
[ 5788.007546] console-kit-dae[8521] trap int3 ip:7f268922a143 sp:7fffe7fca950 error:0
[ 5790.012563] console-kit-dae[8527] trap int3 ip:7f051448d143 sp:7fffd6dc5de0 error:0
[ 5792.225186] console-kit-dae[8536] trap int3 ip:7f58e43eb143 sp:7fff3c5b0ce0 error:0
[ 5793.463198] console-kit-dae[8540] trap int3 ip:7f8951c37143 sp:7fffae2da770 error:0

Back up session error message

Hey I was trying to sync up my iPhone 4 today and this message popped up 'iTunes could not back up the iPhone "Ryan's iPhone 4" because a session could not be started with the iPhone.
http://d.pr/PPIh
if you know anything please help me out
twitter: @plinske

See Here
Troubleshooting Backup Issues
http://support.apple.com/kb/ts2529

SSMS Intermittent error - "Error message is: SqlDateTime overflow"

SQL 2008R2(10.50.6000) Standard Edition, 64 Bit on Windows 2008R2 SP1 Enterprise.
SSMS 10.50.4033
From time-to-time (several times per week) I receive the following error when running a query from SSMS.
"An error occurred while executing batch. Error message is: SqlDateTime overflow. Must be between 1/1/1753 12:00:00 AM and 12/31/9999 11:59:59 PM."
This happens on small single statement queries, large complex admin queries, ad hoc queries, queries that I have source controlled and tested/run many times. I have exhaustively checked the target tables and don't find any dates out of range.
Typically, I just rerun the query and it runs fine.
Another error that occurs less often is
"An error occurred while executing batch. Error message is: Non-negative number required.
Parameter name: count"
This is particularly confusing since I don't have a parameter named "count" which is an illegal T-SQL identifier anyway.
The references to "SqlDateTime" and "count" lead me to believe this is an SSMS coding error.
Ray

Unfortunately, without a scenario to repro the issue, it is impossible investigate. And overall, intermittent errors are horrendeously difficult to troubleshoot.
What I would recommend is that you install SSMS 2012 SP2. You can download it for free here:
http://www.microsoft.com/en-us/download/details.aspx?id=43351
You can run SSMS2012 against SQL 2008 R2 without problem, and personally I find it nicer to work with.
Not that I am sure that it will resolve the issue.
Erland Sommarskog, SQL Server MVP, [email protected]

Error messages in Process chains

Hello BI fans
In which transaction can I maintain batch-initiated error messages from process chains.
I am not looking for the process chain variant for messages.
I would like to create messages only for errorness messages.
thanks
BEO

Hi,
Please check the forum before posting for this issue.
Here You can follow below steps:
1) right click on process type and select "create messages".
2) choose "error" and create variant for error message
3)write message body in "EDIT DOCUMENT" and mention email ID's in "Maintain Recipient list" tab
4) save and schedule the chain again
Edited by: shailesh patil on Nov 14, 2011 5:51 PM

Error message when trying to create any query

I am trying to run a query on my sql server and get the following error message:
"An error occurred while executing batch. Error message is: The directory name is invalid."
how do I fix?

With me it had indeed something todo with some temp files.
Me and my colleague where logged on to a remote server (remote desktop connection), and on that server we were both using the sql management studio.
Suddenly we both received the error "An error occurred while executing batch. Error message is: The directory name is invalid.".
The solution for us was just logging out (ALL USERS) that were currently connected (with a remote desktop connection and that were working with the sql management studio) and afterwards logging back in. That solved it here.
Regards
Thomas

Error in batch session processing in background mode

Hi ,
I am trying to do data transfer using batch session for transaction FD32.
Here the batch session is executing when I am processing the session in foreground.
Whereas in background mode it is failing.
Please check and assit.
Regards
Kishore

Hi Kishore,
Probably it will be some information or warning message which is coming in the background execution of the session.
That is the reason your session is going into error. Run the errored out session once again in foreground mode. You will get to know the reason of failure.
Please let us know of any doubts.
Cheers
VJ

Conflicting Error Messages in Batch Input Screen SAPLCOIH 3000

Hi,
Appreciate it if someone could guide me on a small batch input issue I have with the creation of a new work order and attempting to place costs in a specific line of a value category. I am able to work out and try to place the cursor in the field I need (PMCOEA-SKOSTENKGR(8)) but when I run the bactgh input session it comes up with the error message "No batch input data for screen SAPLCOIH 3000". When I try and alter this to throw the screen required I then get the message "Field PMCOEA-SKOSTENKGR(8) does not exist in the screen SAPLCOIH 3000"?
I am confused by this. can any one shed any light on this please?
Thanks

Hi,
Thanks for your reply. Yes I have also tried both stepping thru the process online and in background with the same outcome. I'm tring to understand whether there is an issue with trying to supply estimated cost details via batch input. All my other screen processing up to this point (including adding all work order header, notifications and long text information) works perfectly and without problem. The batch input tells me to supply this screen but when I do I get a conflicting error that it is not the correct screen. I'm trying to find whether I should be supplying a subscreen instead.
Any further help appreciated.
Thanks

Batch session error message

Similar Messages

Maybe you are looking for