Batch Specific Unit

Hi
I am working on Batch specific unit of measure.
I want to use mg as Base unit and ML as production unit.
If i use batch specific unit as ML system is not allowing to enter this in in propotion unit tab in material master as it belongs to Dimention.
If i select unit of measure as B sytem is calculating reverse of my expected result.
Can anybody help on this..
Rgds
Gobi

Hi Gobikannan,
I am not sure but might be only Non Dimensional Unit are allowed for Batch Specific Unit.
Check it by creating new Unit Something like AML (ML active ingredient)
Regards,
Dhaval

Similar Messages

Pblm in Converting BUOM to Batch specific unit of measure

Hi Gurus
I am Facing a Problem in converting the base unit of measure to batch specific unit of measure.
I have given BUOM in KG.Batch specific unit of measure is PC.
When i do GR for the material in KG with the average wt of the material in kg in the classification view
the system is increasing my GR KG to convert the material to PCS .
I dont want KG to be increased but the PCs to be rounded off to next integer.
How can i resolve this pblm??
NB:- All the settings are done correctly
and all the notes are applicable in ECC 604
Thanks and Regards
BS

Dear
Did you assing any Rounding value and Rouding Profile in MRP1-MM01 for this item ?? Do not maintained this option in MRP1 and check wether you have Kept rouing vadule against KG in CUNI ??
Basically , if you maintain the profile then it will rounds up to the next level based on the thresold valu as configuired in your case in Rouidng Profile in OWD1 .
Also check in MM-Purcahsing -Order Optimisation -Unit of Measure of Rounding rules for purchased item .This based on the control of optimisation of qty.
Hope it helps
Regards
JH

Mass deletion of Batch specific unit of measure

Dear Experts,
How to delete the batch specific unit of measure in the material master maintained in the additional data -unit of measure and proportional / production unit of measure in mass . We have some 1000 material for which we want to remove the datas related to batch specific unit of measure from the material master.

I have not yet seen an option to delete data with MM17, but I am open to be educated.
I would suggest you do it with LSMW or CATT.
However, test it first in MM02, before you waste your time with mass processing. You might receive errors if that material was already in use and batches exist.

Activation of Batch Specific Unit of Measure in IS-Retail System

Hi experts,
In our scenario for Articles, Client work with kg, but also want to keep track of the number of pieces.
I am trying to MAP this Process using Batch Specific Unit of Measure functionality in IS-Retail.
Is it Possible to Use the Batch Specific Unit of Measure functionality in IS-Retail System.
In Article Master, I couldnt find any "Classification View" or "Proportion/Product unit" Tab.
Also is it possible to capture the Batch Characteristics through Interface ???
-MSK

dear friend,
just in case look here:
http://help.sap.com/saphelp_47x200/helpdata/EN/97/b7293772b7ce25e10000009b38f839/frameset.htm
good luck!

Batch specific units of measure

Hi experts,
I've been reading about Batch specific units of measure and I've make some tests following the indications in this blog:
/people/raja.ramasamy/blog/2010/02/22/batch-specific-units-of-measure-step-by-step-configuration-for-steel-industry
In our scenario we work with kg, but we want to keep track of the number of pieces.
But we don't want to introduce the average weight of each batch, we would like to inform the total amount of kg and the number of pieces. Is possible?
Thanks

Hi,
You can maintain info record for the same by using Tcode-ME11 . you can find conversion factor under Purchasing Org1.
Example - Material XYZ, 50KG=1 BAG ,Base UOM in Material Master as BAG
then conversion factor in Info record as follows
Order Unit will be KG
And conversion factor will be 50KG=1BAG.
Regards,
Sandesh Sawant

Batch specific unit of measurement.

Dear Gurus,
My client is getting raw materials in ingots by unit of measurement in Weight.
But at the time of issue we have to consider lenght and weight. we can not use unit of conversion for the same because iron ingot diameter varies slightly, so we have decided to use the batch specific unit of measurement.
But after creating class and characteristic system is not showing the same in proportion unit in master data.
I think there may be somthing missing in the customization.
Kindly elaborate customization so that i can check and correct accordingly.
Thank you,
Anup.

maintian organisation area - S in the basic data of class( CL02) and also maintain same value (S) against the particular characteristic in the char tab .Now it will appear in the material master .
appreciate if it is helpful

Batch-specific Unit of Measures

Hi,
1. I have activating batch-specific Unit of Measures, but in MIGO don't show me field for input batch unit. Can you tell me how and where set up - for working with batch-specific Unit of measures.
2. Which tables link is between batch and classification, where I use class type 023-batch. (which fields can I join).
Thanks for your advice.

Batch Specific Unit of measures is what was originally called Active Ingredients Management.
You need to set up QM and classification for this, MIGO will not give you additional field for entering quantity in separate UOM
Lakshman

Error in Batch Specific Unit of Measure

Dear Friends,
I am maintaining Batch Specific Unit of Measure with Usage as Product Unit for a Raw Material.
Base Unit of Measure : NOS
PO Unit : KG
Batch Specific Unit of Measure : KGP (KG Per Piece)
When I am doing GRN, I am entering
Quantity in Unit of Entry = 7181.7 KG
Quantity in Stock Keeping Unit = 6704 NOS
The System is giving an error:
The qty stored that was entered is adjusted
Message no. XU040
Plese Help me.
Thanks
Prashant Atri

Hello,
As you have different units of measure, review information on conversion with proportion/product unit in note 362932.
See also notes 312510 and 515187
Regards

Batch specific unit of measure in process order

Hello,
I have a BOM with a component with active ingredient.
Batches are classified and transaction MMBE shown stock correctly in both units.
But when creating the process order I get two items with same item numer in the material list.
One for batch specifiv unit of measure which is fine.
I also get another line in the base unit of measure.
In table RESB both records have movement allowed so they show up in MIGO.
This increases the total requirements for the component.
What is happening??
Best regards,
TOr

Thanks for caring!
As for transaction MMBE it all looks fine. So basic definitions must be OK up to that point.
I think the point is to set requirement for the amount of active ingredient.
Do the batch determination for this.
Do the goods issue in physcial quantity which is the base unit of measure.
I did try now with KG in the BOM. I still get double items in the process order. Now both in KG.
One line is correclty copied.
The incorrect line which is the same in both cases says 1 KG. which is the correct conversion from 0,01KAI.
Regards,
Tor

Batch-specific Unit of Measure

Hi,
What is Batch specific UOM? How do we configure in ECC 5.0? My requirement is as follows -
1. GR qty should be in Base UOM (Kg) and Bags
2. The qty/bag = 95 Kg (standard / Alt UOM) for material
3. However, for shipment received Qty/Bag may very (90-99 Kg/bag)
4. system should capture Kg & Bags and adjust batch specific UOM accordingly
5 Reporting is required in Base UOM & bags across supply chain

Rajendra
Welcome to SDN
Please see if these links help
http://help.sap.com/saphelp_erp2005/helpdata/en/25/283d744f7811d18a150000e816ae6e/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/c8/3ad93f170f8f15e10000000a155106/frameset.htm
Thnaks
Sat

Batch specific unit of measure - Purchase order history correction

I have maintained an alternate proportional unit for a material. This alternate unit is used as the order price unit in the purchase order. I have created a batch characteristic which is linked to this proportional unit of measure. I have also created a Master inspection characteristic which is linked to this batch characteristic.
I want to correct the purchase order history using quality management by transaction code MWBQ. However, when I perform transaction MWBQ, the inventory is reduced to zero and entire amount is posted to price difference account after correction. Hence, my inventory value becomes zero after MWBQ. I cannot maintain the proportional unit at standard price since this is a raw material. Need a solution on how to post correction in purchase order history without actualy making the inventory zero and with moving average price.

Thanks for caring!
As for transaction MMBE it all looks fine. So basic definitions must be OK up to that point.
I think the point is to set requirement for the amount of active ingredient.
Do the batch determination for this.
Do the goods issue in physcial quantity which is the base unit of measure.
I did try now with KG in the BOM. I still get double items in the process order. Now both in KG.
One line is correclty copied.
The incorrect line which is the same in both cases says 1 KG. which is the correct conversion from 0,01KAI.
Regards,
Tor

Batch-Specific Material Units of Measure

Hi all,
Can anybody guide me on Batch-Specific Material Units of Measure----Product/proportion units???
What are the settings required & how it works??
Regards,
Manish

Hi Manish,
The batch specific UoM is used in the process industry where you need to know a characteristic of a batch which is used in evaluating the batch, like concentration or potency. For example, in a sugar syrup, the concentration of sugar may vary and hence it is required to knoe how much sugar is there in the syrup. So you make sugar concentrate as a characteristic in the batch class and use it in the proportionate UoM. So whenever you fill the value of the sugar concentrate in the batch master, how much sugar is there in the syrup is known.
1.     Activate the use of batch-specific units of measure
                 Activate active ingredient management in Customizing using Transaction OMWS. Activate the use of batch-specific units of measure. This allows you to maintain proportion and product units in the material and use them in logistical processes.
2.     Set up the base and proportion/product unit
        In Customizing, the proportion/product unit needs to be created as a unit of measurement. Enter your active ingredient unit of measure under the menu path General Settings  Units of measurement
3. Create Batch Class and Characteristics
4. Assign the class to the material master.
Also set up proportion UoM in additional data of material master. Use the required batch char]acteristics.
So whenever you a Goods receipt you may enter the batch characteristics manually. Or if you are using QM, you may have to activate the link between batch characteristics and inspection characteristics.
Check the stock in proportionale UoM in MMBE
Reagrds
Vineet

Batch specific production unit

Proportionate unit/ production unit need to be used for calculating the
Out put volume as per the specific gravity of the Formulations.
The requirements are as below:
The production out put quantity varies as per the specific gravity of
the formulation.
THE BATCH SPECIFIC PRODUCTION UNIT IS IN Liters.
The confirmed quantity is in kgs and Gr quantity is in kgs. Inspection
lot created and while inspection the specific gravity of the formulation
will be Tested and the value is recorded for the Batch.
Based on this value the Batch specific unit needs to be calculated.
Example: The batch for the quantity of 100 kg Confirmed and made Goods
receipt.
The inspection lot is 100 kg and in result recording specific gravity is
1.1 gm/ milliliter.
Hence the Batch specific production units (lts) is 100 kg /1.1 = 90 LTS
Kindly suggest how to Map the Scenario.
Regards
Sasikanth

Hi Gobikannan,
I am not sure but might be only Non Dimensional Unit are allowed for Batch Specific Unit.
Check it by creating new Unit Something like AML (ML active ingredient)
Regards,
Dhaval

BATCH SPECIFIC MATERIAL UOM

Dear All,
I created material, base unit of measure EA order unit BOX.1BOX = 40 EA
create PO ORDER 10BOX, 10*40=400ea.
now the problem while receiving GR, I will receive 10box but each box 41ea.so it mean i received 10*41=410ea.
I WANT TO CHANGE PACKING FACTOE IN GR ITSELF.
How to do this scenario?
i think it will work through batch specific UOM.
PLS HELP ME HOW TO CONFIGURE BATCH SPECIFIC UOM BY STEP BY STEP FOR THIS SCENARIO
THANKS,

Hi Bhaskar,
U definitely need batch specific unit of measure for ur scenario. do the following config
1) Activate batch specific unit of measure
2) Create a new batch specific unit of measure in "Edit batch specific unit of measure"
3) Define calculation of proportion quantity from base qty
4) Maintain the batch specific uom in material master
5) Create class with CL02 for batch specific uom - assign relevant characteristic in this class
6) Assign this class to material
At the time of MIGO select the class and assign the new conversion factor
U can change the conversion factor with MSC2N also
Hope this will help u
award points if found useful

Batch Specific UoM

Finished products goods receipt is made in litres(BaseUoM).WE also have batch specific unit of measure-Kg.Is there any standard report available to see the finished products batches along with the batch specific unit of measure quantity

hi,
check in MB51....just give your material and execute. After this there is a Detail List (CtrlShiftF12).
Then through Variant you can get Batches and Uom...
Regards,
Mridula.

Batch Specific Unit

Similar Messages

Maybe you are looking for