Batch split error message: Item category not defined

Hi gurus,
I'm trying to use the batch split in an inbound delivery but I get the error message of the subject of this thread while saving.
Could you bring some light here please?
Many thanks,
Marc

Issue found.

Similar Messages

Item Category not Defined Error message when deleting a batch item in Deliv

Hi,
I am trying with a Intercompany transfer . So after creating Interco. Transfer we have followed with a delivery document.
Now,we would like to delete the delivery document. For your info. Del. doc is still open. We haven't gone for Goods issue or anything else.
So,we tried removing the batch line item in batchsplit tab of the delivery and then deleting the delivery document.
But we get the error message "Item catgeory Not defined". but we could see entries for Item category Determination with the particular Delivery typeItem Category Group from Material MasterItem Usage+Item Category.
Why does system throw "Item catgeory Not defined". when there are entries for particular determination available .
And this seems to be Syste
Thanks,
Dhilipan

Hello Sandy,
Thanks for ur update. But its ticked already.. We checked it.
But we still face this issue. And we are not able to replicate the same issue in QA..What cud be the reason.
But Config..seems exactly similar to Pro. and QA
Thanks,
Dhilipan

Item category not defined in batch split in vl02n

HI GUrus,
cna anybody please helpe me with this. We have to send 3 differnt batches of parts to the vendor via returns PO. when i go to vl02n and click on batch split to send out batch A - 5 EA, Batch B - 5 ea and Batch C - 5 ea. the system is throwing eerror messages like item category not defined. please help me with this
thanks
anusha

I can't understand what are you doing...
1. You already asked this question - it was answered
2. Link is pasted in my previous message.
Please read your previous question (that was the same) - please read the answer too. That's all.

TO confirmation error - item category not defined

Hi experts,
We have a HU/WM setup in our warehouse. While i try to confirm the TO i am getting an error 'item category not defined'?
I am able to confirm the TO's for other orders, this is happenning for a specific group of orders which have a different item category in delivery.
Any hints when this error will appear?
Is there any config where we assign the delivery item category with the warehose or any other setting?
Thanks,
Harish
Edited by: Harish RJ on Jan 24, 2011 7:02 AM

I suggest have a look at OSS note 1464539 - your settings in table T184L might be wrong.
Is it possible that the batch is determined via WM, during picking? If different batches have been determined for one item, it will cause batch split in your delivery - if settings in T184L are wrong, system cannot cope with it and may throw error message VL324.
(sorry for duplicate, I was slow a little bit and "Sap: IN" said the same in the meanwhile)
Edited by: Csaba Szommer on Jan 24, 2011 8:29 AM

SAProuter error message server hostname not defined

Dear all,
I am trying to install SAP router for my system i have done the basic installation but i check my sap router using
lgtst u2013H /H/198.168.201.157//H/194.39.131.34/S/sapdp99/H/oss001/S/sapmsO01 u2013S x u2013W 30000
it gives an error message:
* can't connect to message server
* reason : message server hostname not defined
can someone help mw with solution.
Regards,
Gaurav sood

Dear all,
Will you please check SAPROUTTAB setting
as i am getting error message as
C:\>lgtst -H /H/192.168.201.157/S/sapdp99/H/172.29.4.168/S/sapdp99/H/oss001/S/sa
pmsO01 -S x -W 30000
using trcfile: dev_lg
[Thr 2416]
[Thr 2416] * LOCATION    SAProuter 38.10 on 'transporter'
[Thr 2416] * ERROR       transporter: route permission denied (TRANSPORTER to
*              172.29.4.168, sapdp99)
[Thr 2416] *
* TIME        Fri Jun 11 12:34:45 2010
[Thr 2416] * RELEASE     700
[Thr 2416] * COMPONENT   NI (network interface)
[Thr 2416] * VERSION     38
[Thr 2416] * RC          -94
[Thr 2416] * COUNTER     3
[Thr 2416] *
[Thr 2416] *****************************************************************************
SAPROUTTAB file
# SNC connection to SAP
# SNC-connection from SAP to local R/3-System for Support
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" * *
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
# SNC-connection from SAP to DVP system for R/3 Support & SAPTelnet
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 172.29.4.168 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 172.29.4.168 23
# Access from your local Network to SAPNet - R/3 Frontend
P * sapserv2 3299
P * 147.204.2.5 3299
# All other connections will be denied
D * * *
Regards,
Gaurav Sood

Item category not defined

Hi gurus,
My client need help to ship some parts.
He creates the delivery (VL01N)
And when we enter the batch we have an error message appearing : Item category is not defiened.
I check in the sales order and everything is ok (item category ZXXX for free charge). In the maeterial master the item category group is NORM.
Do you have any suggestions of issues which can cause such an error.
Please advice
Regards

HI patrick
Please check in the copy control VTLA at item leveL (OR-LF) of item category proposal and item category are properly mantained or not ,and are available or not ?
please check the item category assignment VOV4
but can you elaborate more patrick
Can you tell me is it a normal sales cycle OR-> LF->F2 , you are doing or any free of charge delivery or returns cycle cycle you are doing ?
Is that order a MAKE TO ORDER ?
What is the item category in sales order ?
what is the schedule line of the sales order ?
CAN you tell what exactly the problem in detail ? what you have done in sales order and what you have done in delivery ?
plz let me know patrick
waiting for your reply
Regards
Srianth
Edited by: sri nath on Apr 9, 2008 7:41 PM

Error message - items were not copied

I keep getting an error message +'some of the items in the itunes library were not copied to the ipod because they cannot be played on this ipod.'+
I have updated, reset and I don't know what else to try. This is my first ipod and I can only get 6 tracks on it.
The tracks are from c.d's that I have ripped to the itunes library.
Any suggestions would be appreciated :o)

Select one of them and
click File>Get Info>Summary ... is the format/encoding/bitrate one of the following:
AAC (M4A, M4B, M4P) (up to 320 kbps)
MP3 (up to 320 kbps)
MP3 Variable Bit Rate (VBR)
WAV
AA (audible.com spoken word, formats 2, 3, and 4)
AIFF

What do I do with error message "items were not synced"?

Twice after syncing my iPad, I got an error message that "items were not synced. See iTunes...". What does this mean, and what can I do about it? Second problems is that after I unchecked several books, they still show up on my iPad. I have read them and no longer want them on my iPad.

Select one of them and
click File>Get Info>Summary ... is the format/encoding/bitrate one of the following:
AAC (M4A, M4B, M4P) (up to 320 kbps)
MP3 (up to 320 kbps)
MP3 Variable Bit Rate (VBR)
WAV
AA (audible.com spoken word, formats 2, 3, and 4)
AIFF

Profit Center Hierarchy Error - profit center hierarchy not defined

in Quality client QA
0ke5, the configuration settings is not transfered from DEV through transport request.
now i have created the Profit Center Hierarchy and started process testing. Now i try to assign the hierarchy in 0ke5, error message standard hierarchy not defined in controlling area XXX.
I also try to define the Dummy Profit Center KE59, but error comes profit center hierarchy not defined.
also note that 0ke5 and 1kef are blank.

try to re-transport PCA
IMG; CO--> PCA --> tools --> transaport customizing set. -->
but i believe if you transport only the "master data" Q will function fine. ( try OKEQ first)

Firefox pops up an error message on certain pages, all other browsers work fine, how can I make firefox ignore the "error" [e2219] css init error: ReferenceError: g is not defined

Basically I want to replace the Ajax Control Toolkit Slider in favor of the Component One Studio for iPhone Slider for better mobile/desktop consistency (the ajax slider doesn't work well with iPhone). I created a simple page that works on every browser and platform (iPhone, Android, Mac, Windows) except Firefox, which fails on every platform. I have already tried disabling all plugins (safe mode) and clearing cache, I have also tried this with different versions of Firefox on different platforms. I posted this error on the Component One forum but since this only occurs with Firefox I believe this is a Firefox issue.
I searched for this error on the forums and Google but didn’t get any results:
''[e2219] css init error: ReferenceError: g is not defined''
The console has this message:
''[12:05:26.954] uncaught exception: [Exception... "prompt aborted by user" nsresult: "0x80040111 (NS_ERROR_NOT_AVAILABLE)" location: "JS frame :: resource:///components/nsPrompter.js :: openTabPrompt :: line 462" data: no]''
You can see the error by visiting http://www.componentone.com/i/
Visit the same URL with IE, Chrome or Safari and there is no error. If I click [OK] the page loads normally enough for me. Is there some JavaScript or CSS line I can put in the page to make Firefox ignore the error? If so that would be great because even if there is a fix put into Firefox itself there will be those millions of users out there that will not upgrade.

A good place to ask advice about web development is at the MozillaZine "Web Development/Standards Evangelism" forum.
*http://forums.mozillazine.org/viewforum.php?f=25
The helpers at that forum are more knowledgeable about web development issues.<br>
You need to register at the MozillaZine forum site in order to post at that forum.

Error "Item is not defined as an Inventory Item" using oInventoryGenEntry

I am trying to create a Receipt from Production with this code:
                receive = (Documents)_Company.GetBusinessObject(BoObjectTypes.oInventoryGenEntry);
                receiveLine = receive.Lines;
                        receiveLine.BaseType = 202;
                        receiveLine.BaseEntry = oli.ProductionOrderNumber;
                        receiveLine.BaseLine = 0;
                        receiveLine.Quantity = oli.Quantity;
                        receiveLine.WarehouseCode = "01";
                int errorCode = receive.Add();
where the production order will contain several component items that make up a finished good. Two of the component items are Labor and Royalties and are not marked as Inventory Items.
The Add method returns this error:
"Item is not defined as an Inventory Item" and references one the non-inventory items (ie 'Labor').
I can received the same Production Order through SBO without an error.
Suggestions?
Thanks

Because I am concerned about eliminating Labor from the Bill Of Material and its effect on the 'Acutal Product Cost' when I create a Production Order I set up a test.
I created two Finished Goods Inventory Items with similar Bills of Material. Both included a Labor component (non-inventory item). The difference though, is one Labor component has an Item Type of Labor and the other Labor component has an Item Type of 'Items'
Next, I create a Work order for each of the finished items. Then I did a receipt from Production and closed the Work Orders.
Looking at the Production Order summary, the Finished Good had an 'Actual Additional Cost' that was non-zero for the Finished Good that had a Labor component of the 'Items'; the other Finshed Good had a zero 'Actual Additional Cost'. These seems in conflict with the eLearning segment on Production.
At this point is this a different Forum?

Data Collection task error (Item is not defined in Cons Chart of Accts 01)

Dear Experts,
While executing Data collection task, I am getting error "Item is not defined in Cons Chart of Accts 01", What could be the reason?
(Many Items are getting collected in target, but at the topline this error is been shown)
Regards
Ritesh M

Thans Dan,
I have gone in the program UGMDSYNC, and getting few Gls which have not assigned Cons Chart of account.
Kindly tell me how to assign chart of account to these GL account?

.error Print indicator 029 not defined. Message no. L3118.

error Print indicator 029 not defined. Message no. L3118
Hello everyone.
I need some help.
when i run program RLVSD40 (Initiate printing of transfer order).
i got error.
Print indicator 029 not defined
Message no. L3118
what should i do to solve this error ?
please help.

Hello,
I am getting the same issue.
Please let me know the solution.

Trying to update apps on iphone and getting error message, there is not enough available local storage to download these items. you can manage your local device storage usage in settings

trying to update apps on iphone and getting error message, there is not enough available local storage to download these items. you can manage your local device storage usage in settings. What am I to do?

The storage you purchased is in the cloud, and doesn't do anything with your pad. Your problem is simply that you have too much content on your pad. Go to settings, general, usage, and it will show you how much space you have avaliable on your pad. If you let the screen sit for a while, all the apps will be displayed, and you can see how much stuff you have associated with each.
You have to no option but to delete some of the content on your pad. Videos, comics, pitcures and some music files use a lot of space. The cloud allows you to leave stuff there, so you can get it when you need it.

An error occurred while executing batch. Error message is: There is not enough space on the disk.

Hello all,
I execute a T-SQL query, which will retrieve large amount of data, however, I get an error message after a few seconde.
The error message is :
An error occurred while executing batch. Error message is: There is not enough space on the disk.
Who can tell me the reason and waht's the steps to solve this issue ?
Really thanks.
Thanks, Jed deng

The other two posters suggested that the problem with tempdb or you data/log files. This is not the case here. The error message relates to the client-side of things. Apparently SSMS needs to store data on disk. I don't recall exactly when this happens,
but I seem to recall that the files appear in you %TEMP% directory.
I would suggest that your correct action is to clean up the disk. Not the least there may be a lot of junk in your %TEMP% and %TMP% directories.
Erland Sommarskog, SQL Server MVP, [email protected]
Thanks Erland, I was not aware of this earlier. Now, I am able to find out one of the resons for slowness of SSMS gird. Also, I have just checked it with process monitor, SSMS is creating tmp%.tmp files..
- Chintak (My Blog)

Batch split error message: Item category not defined

Similar Messages

Maybe you are looking for