Batch Spliting

Hi,
While making stock transfer of batch material I am getting this err.." Only 0.000 KG of material 10000020 0000000056 available"
In Stock(MMBE) its showing 000000056    2.00 and
                                          00000086     42.80
and i checked in MB5B on current date(07.01.2009) its showing (Stock on 07.01.2009    2.000 KG)
Problem is While doing the delivery with batch determination of 000000056 its showing "Only 0.000 KG of material 10000020 0000000056 available" this error
Could you suggest me.
RGS,
PRIYA.

Hi..
I think for the material some open order is there pls check open order if it is there pls delete the open orders.
regds
sri

Similar Messages

Inbound IDoc SHPCON - Batch update issue

Hi all,
I would like to use SHPCON.DELVRY03 idoc in order to update Outbound delivery document.
Scope is :
- picking
- good issue
- update batches
- update serial numbers
- update volume and weights
We met issue on update batches a soon as one document item already has batch information before receiving IDoc.
2 cases :
- no batch spliting => High level item has already a linked batch (LIPS-POSNR = 000010 and LIPS-CHARG not empty.
Is there a way to update batch information if external warehouse confirms another batch number ?
- batch splitting => High level item has already 2 sublines POSNR = 900001 & 900002. Both has batch numbers.
If I want to confirm it, I can send E1EDL19 with BAS qualifier but sublines are added...
Must I delete existing sublines with E1EDL19 DEL ?
Thanks a lot for your help.
J.C.
and to post good issue.
All is OK except

Hi,
We are having same issue as of yours...
i.e Updation of batch via IDOC to the delivery if delivery contains batch ...its not happening and also idoc not throwing any error
Did you able to resolve this ?
Thanks
Rajesh

Item not relevant for billing - Batch Management

Dear Experts,
I'm testing the Batch Management with the configuration detalied on the Building Block - J19 from SAP. So I've created a new item position called YG05 which is working for the batch spliting.
But now the problem is that when I'm billing with Tx VF04 or VF01 it gives me the following error and doesn't create the invoice.
VF 044 The item is not relevant for billing
Now, the problem fixes when I go to Tx VTFL and change the position TAN in the field Copying Requirements from 004 Delivery - Related Item to 003 Header / Dlv. - Related. I can do the billing, but when the system print the invoices it print for each position type, I mean this.
"Before the system printed 3 copies of the invoice, but now not only print the 3 copies, now it send printing the 3 copies and also 3 blank pages (i assume that those are por the YG05 position"
If anyone have and advice if the fix i did first is correct.... And also have a solution for this last problem. Please reply...
Thanks
Javier Sandoval Vera
Universal Sweet Industries
Edited by: Javier Sandoval on Feb 12, 2009 4:46 PM

Hi Javier,
for correct settings please check sap note 77414, choose your process and change your settings accordingly.
Balazs

Excise conditions not capturing after batch split

Dear All,
After creating PO,OBD, Invoice found that for a material 10 qtys got batch splited as 5 CV as each line item. For one line item excise conditions were picked where as for second line item (different batch) excise conditions JEXT, ZECS & JA1X were not captures.
What might be the reason. Conditions are maintained in VK11.

Dear Lakshmipathi,
PFA the below screen shots. Also fyi, from analysis tab it is showing as flowing.
Thanks & Regards,
Ganeshbabu.KA

Batch determination in order doesnt branch into batch selection screen

HI Friends ,
I am doing manual batch determination in the sales order . My intention is to select specific batches if the system branches into batch selection screen . But the order wouldn't branch into that screen but directly the batch field is filled with the batch . Also system is giving message ' number of batch splits is limited to 001" . There are more than one batch in availability .
Could somebody tell me why it wouldn't allow me to select batches eventhough it is manual batch determination ?
Regards
Raghav

Hi,
In logistict genral>>>Batch mgt.>>>B. dtermination & check>>>Strategy type>>>Define SD strstegy types.
Select which type u r using , go to details speciefy u r batch spliting number or make it blank,also tick mark to changes allowed
Regards,
Kapil

Payment (f110) of IDOCs spliting into batches and move to folder in al11

I am working with a senario where in I need to trigger an payment proposal from F110 with reference of Document
Stettings which I have done
Posting Date : 22.07.2010
Docs entered up to :22.07.2010
Customer items due by : 22.10.2010
Company Code : 8000
Payment Method : RG
Vendor : A321
In Free Selection
The Document Number :
I Have not selected any logtypes in Addtional Log
Printout/Data Medium
Programs : ZFIR_RFFOEDI1
I have not selected any program for List
after creating payment I'm Apporving through ZAP1 (<50000) and ZAP2( >50000) tcodes after arroval its geneating the idocs , ican see in we02/we05
after that in AL11 directoty in that under intermediate path '/usr/sap/DEV/interface/scbpayment/intermediate/'
if I'm creating payment 20 at the same time some of ZAP1 and ZAP2 ...it combines all the idocs i need to separate them in intermediate folder.
and i created paths in AL11
'/usr/sap/DEV/interface/scbpayment/intermediate/zap1'
'/usr/sap/DEV/interface/scbpayment/intermediate/zap2'
but nt coming into this folder how can i change into this folders after approval ZAP1 & ZAP2.
Thnaks
Gaddam

Hi..
Thanks for reply..i need under Intermediate path and i need to use conditions.
If Payment is below 50000 then ZAP1 Tcode will approve the Payment and same as ZAP2
if payment is greater then 50000 then ZAP2 Tcode will approve the payment.
so where can i change this condition.and debug the program but i can't find.
Thanks
Gaddam

Map including spliting operation dosen't work in MDM Import Server

Hi All,
I met a problem with MDM Import Server when using a map file with spliting operation in it, although I can use it in MDM import manager to load data successfully. The error in log file is like this:
Record Matching...
Importing Lookup...
One or more attribute values are invalid.
One or more attribute values are invalid.
One or more attribute values are invalid.
One or more attribute values are invalid.
Import Failed!
The spliting in my map is: I split field "Category" into category1 and category2 with space " ". e.g. value "Trousers M" is splitted into "Trousers" and "M" . Then I map category1 to category and category2 to size.
I tried to delete this spliting and just map "Category" to "Category" then it works well for Import Server.
Is it the bug of MDM import server? can anyone give me a explaination?
Thanks! Bin

Under Configuration Options of the Import Manager,
check the values for
<b>Default Batch Handling</b>
AutoMap Unmapped Values = Yes
Unmapped value Handling = Add/Ignore/Fail.
Set the values according to your needs.
Make sure that the data source is updatable as well.

Printing mataerial description for batch split material at delivery level

Hi all,
Here i am printing the material description which is maintained in the item level at sales order level.For each material they have maintained two material descripption.I am not able to display the second material description in my export invoice whenever the material is splited into batch ie batch split at delivery level. so please can anyone help me regarding this, I am not able to get it from long time.
Regards,
madhu

Hi,
You can create a two folders for printing the line items, one folder for the normal line-items and the other folder for printing the BAtch-Split Items. you can do this by putting condition as UEPOS NE 0 or UEPOS EQ 0. You can include the Item-Description of the Batch-Splitted item in the Corresponding folder, so when there will be a batchsplit it will get printed.

Delivery Split - Batch Management Stock

Dear Friends,
I have problem in my company :-
For a item in Scheduling Agreement if I create a Outbound delivery in Background Delivery gets split due to no Batch Management in FIFO style.
I don't want that split if the price of the batch are same.
What should be done ?
I tried one case on material - 9430.033.210-079 . On SA - 30018392 I tried creating a delivery of 1700 pc. The deliveries got splited in to 2.
DO No.          Batch                        Qty
1080000025     200704          1640 pc
1080000026     200711          60 pc
As Stock for
200704                     was 1640 pc
200711                     was 400 cp
Rate for these two Batches is same.
What could be done in this issue ?
Regards,
Nikhil

Hi NIkhil
As per my understanding your asking abt Batch Split beacuse u r showing here batchsplit
you are saying that if the price is same why batch is splitting that is u question?
But here the stock is not available in single batch As per FIFO system picking material from 1st batch 1640 after that it is picking remainning stock.
if u dont want to do batch split try this put 1640 stock in first line reduce the stock
and enter new line with remaining stock in second line.
In this Batch split is not there 2 line items are available .
if it is not happening in delivary try this in order and come to delivery with 2 line items..for that u need to delete existing delivery do the neccessary things in order and create delivery..
Rewards if it is solve u r problem
Regards
Durga Prasad

Batch determination for stock transport order in po for delivery.

Dear All,
When I am creating a delivery in VL10D against a srock transport PO, while determining batches, i am getting an information message "batch determination is not possible because there is no search procedure".
How to configure so that , the batch should determine for making a delivery.
Quick responce will be highly appreciated.
Thanks & Regards
Prasant Sekhar

Hi,
I had the similar problem with one of the client and I could solve it.
The procedure is as follows:
1)goto spro->logistic general ->batch management->batch determination
2)Define condition table with proper selection of field .
3)Define access sequence which will consists of sequence of condition tables.
4)Define batch strategy and assign access sequence to it defined in step3.
5)Define batch search procedure and assign it to movement type 641 or 643.
6)Maintain batch search strategy condition record in tcode VCH1 with the combination u defined in access sequence.
7) Apply a USER-EXIT (MV50AFZ1) in the program - SAPMV50A as follows:
IF LIKP-VKORG = '0326' AND LIKP-LFART = 'ZNL' AND LIKP-KALSM_CH = ' '.
Select single KALSM into ikalsm
               from T683C
               where VKORG = likp-VKORG
               and VTWEG = '04'
               and SPART = '00'
               and AUART = ''.
               Likp-KALSM_CH = IKALSM.
ENDIF.
8) Once you create the delivery (VL10D) against PO, go to VL02N -> Batch Split -> Batch determination
You will find the batch will be splited into the delivery automatically.
Reward the point if feel relevant.
Regards,
Praveen Ghosh

Auto batch Selection in MB1B

Hi All,
We want Auto Batch selection on FIFO Basis while transfering the Material to Sub Contracting Vendor through TCode MB1B.
Thanks in Advance........
Sanjay

Hi,
I'm addin to Mr. Jürgen L. input. once you will put * and execute system will brin all live batches with quantity and will do the spliting of it also. but it will not in FIFO based.
So Lets try this and see how system behave
1. Do the setting on 541 movment in "Logistics - General-> Batch Management-> Batch Determination and Batch Check->Batch Search Procedure Allocation and Check Activation->Allocate IM Search Procedure/Activate Check" Here allocate your IM seach procedure & put check batch tick on.
2. maintain the batch serch strategy in MBC1 with the ME01 or if you are having any customized condition type then maintain for it.
now try MB1B
Rgds
S

Batch Split

HI Experts
I am facing a problem for Batch Split Addons . There are a parent Batch like as quantity as(100) .when i am going to split this parent Batch into number of child batch . Batch is split-ed successfully but stocks is increased according to splitting Batch (ex we create 2 child batch (50,50)) then stock quantity is became (200). How I can manage stock
and using code is
SAPbobsCOM.Recordset oRecSet = default(SAPbobsCOM.Recordset);
oRecSet = (SAPbobsCOM.Recordset)SBO_Company.GetBusinessObject(BoObjectTypes.BoRecordset);
GRPo = (SAPbobsCOM.Documents)oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInventoryGenEntry);
string sql = string.Empty;
GRPo.Lines.BatchNumbers.Quantity = Convert.ToDouble(oEditQty.Value.Trim());
GRPo.Lines.BatchNumbers.InternalSerialNumber = Convert.ToString(p);
GRPo.Lines.BatchNumbers.BatchNumber = oEditNBID.Value.Trim();
GRPo.Lines.BatchNumbers.ManufacturingDate = DateTime.Now;
GRPo.Lines.BatchNumbers.Add();
GRPo.Lines.BatchNumbers.SetCurrentLine(0);
GRPo.Lines.ItemCode = SplitBatch.ItmCode;
GRPo.Lines.ItemDescription = SplitBatch.ItmName;
GRPo.Lines.ShipDate = DateTime.Now;
GRPo.Lines.Quantity = Convert.ToDouble(oEditQty.Value.Trim());
GRPo.Lines.WarehouseCode = WhsCode.Selected.Value.ToString();
GRPo.Lines.Add();
GRPo.PaymentGroupCode = -1;
Regard
Pushpendra

Hi
These quantity is coming from the matrix rows each row have a different quantity.so that is not a matter .and I applied a specific condition. quantity depend on three types ( Inspected qty, Non Inspected qty, Difference qty) all are depend on (ddl) in matrix. when i am going to split parent batch into child batch then child splited Batch is 10 qty then stock is increased 10 qty.
How i can manage these quantity.and stock could not be increased.
Regards
Pushpendra
Edited by: Pushpendra Yadav on Feb 14, 2012 10:06 AM

Retrieve batch from serial number in MIGO transaction

Dear all Gurus,
My company already implement ECC6.0 with IS-Retail function. And I have some concern that my company would like to activate batch for control the stock at DC and Store level and some articles also control serial number.
When I would like to move the stock (ex. stock transfer between storage location MVT 311) in sap system I need to specify the batch first and specify serial number later. But in the physical stock what we know is serial number. So would it be possible to specify serial number first and let's the system to find out batch from serial number?
And one concern it's possible that serial numbers that I select maybe have different batch number.
Ex. Serial Number 1 belong to batch A
      Serial Number 2 belong to batch B
      Serial Number 3 belong to batch B
When posting in MIGO transaction it's should to split in 2 line
First line Mat xxx      Qty 1 Batch A Serial Number 1
Second line Mat xxx Qty 2 Batch B Serial Number 2, 3
Have anyone already have some case like this? Please help to suggest possible solution.
Best Regards,
Kate

Hi Kate,
I have some experience in Batch Management with IS Retail ECC 6. I believe their is a valid solution to it.
coming to your query of way to aviod manually assignment of batches and spliting it for the site to site stock transfer via mvt type 301 or 311.
we need to create Batch Search Strategy and Sort Rule for it. The steps to do it as follows.
1. Create a Characteristic via CT04 for batch handling in the search strategy with class type "23"table name "MCHA" and field name "CHARG". If you are working with fixed value of batches, define it as the characteristic values or if you have batches creating internally by the system, Put a * in it.
2. Create a class in CL02 with class type "23" and assign this newly created characteristic to it.
3. Now create a sort rule in CU70 and assign this same characteristic to it and select the ascending or desending check box based upon your choice of "FIFO" or "LIFO".
4. Now create a new strategy for batch determination while doing different inventory movements. Go to Logistics General  Batch Management  Batch Determination & Batch Check  Strategy Types  Define Inventory Management Strategy Type. Copy the standard one and create one for you and assign the class and sort sequence created above to it and define the number of spilts of batches, should happen, if in case one batch is insufflcient to handle the required movement of stock. maximum it could be 999.
5. Now create batch search procedure definition. Go to Logistics General  Batch Management  Batch Determination & Batch Check  Batch Search Procedure Definition  Define Inventory Management Search Procedure. Copy the standard one and create one for you and assign the condiiton type created in the step above (strategy) and save it.
6. Now assign the class created above to all the relevant article via CL20N.
7. Now assign batch search procedure to the relevant movement types. Go to transaction OMCG and assign the mvt type 301, 311 and other relevant movement types.
8. Maintain the condition record for the Batch Search Strategy via MBC1 / MBC2.
9. Activate Batch classification for goods movements via OMCV as per choice.
I trust it will help you a lot. If you find and believe the same, please assign the relevant points to me.
Kind Regards,
Kunwar

Cost(vprs) of free goods with batch managment

Dear Gurus,
I have a problem ahout free goods with batch management.
Cost(VPRS) is not accumulated in billing(free goods is not relevant for billing).
My configurations are shown as below:
Ordered goods (and batch) item category :zta1(copied from tan)
Free goods (and batch) item category :zann (copied from tann) pricing:B ;not relevant for billing;dermination cost:X
copy control(from delivery to billing):
ztan: accumulation cost :X
If I use the material without batch management,Cost of free goods(without batch) is accumulated to main item(ordered goods).
So, what can I do?
Thanks and Best Regards,
Lykin Kan

Hi,
These notes are useful:
SAP Note 1365939 - VPRS logic and Customizing settings in SD
SAP Note 547570 - FAQ: VPRS in pricing
If you have the problem in the transfer from SD conditions to CO-PA, check if you transfer only invoices to COPA, if you don't invoice the deliveries of free goods, then you don't transfer this 'sales' or costs of 'gifts' to COPA. You can check the customizing of COPA in tcode ORKE (IMG for COPA). SAP Note 74486 - INFO: Overview of consulting notes for CO-PA is a good summary about this issue.
I hope this helps you
Regards,
Eduardo
PD: I forgot SAP Note Number 33968 SD/CO-PA: Characteristics from sales doc tables
Edited by: E_Hinojosa on Sep 10, 2010 9:44 AM

If statement in calculated batch characteristic (dependencies)

I have a little problem with calculating a certain batch characteristic.
The situation is the following:
I have batch char A, batch char B and batch char C. Batch char C is the result of the sommation of char A and B. The problem I have now is that batch char C only should be calculated when batch char A and B are different from 0.
I have a custom build interface that imports QM data to the batch chars. Default, all my batch chars are set to 0 so if I just say $self.charC = $self.charA + $self.charB, I always get a value.
Is it possible to some sort of IF statement to check if the value is different from 0?

Dear,
You need to try with variant table
take all the combination and enter in a variant table and see the result...it works
example
A     B      C
0      0      space
0      1      sapce
1      1      space
I hope you got it

Batch Spliting

Similar Messages

Maybe you are looking for