Batch splitting not allowed

Hi ,
I have created a Sales order with 20 Qty with a Brach no. XYZ.
when i creating delivery doc. it saying an error " Batch qty spliiting not is allowed XYZ."
I checked in MMBE, it has 160 qty.
why it si showing this error?
can anyone give any clue.
thanx
sourav

Hi,
Please check the batch search strategy [VCH2] for the material... If the number of batch splits there is 0 . Then change it to 999 [the max value].
Try out..Gud luk
Thanks & regards
Mahesh

Similar Messages

  • Batch split not happening during delivery

    Hi Experts,
    I have enough of stock for a material with different batches (with different expiry dates). When I create an order for qty 100, system confirms it on a certain date taking 1st batch nearest to expiry date, as per the search startegy set in the cponfiguration.Please note here that the batch that system picks has got only 50 qty in stock, but it shows whole 100 qty against it. Probably because Batch split is not possible during sales order creation, hence system showing whole qty against one batch.
    Now, when I try to create delivery, it shows only 50 qty of the same batch in delivery document. I select the line item and go to the "Batch split" tab to effect batch split, but system does not allow. It says "Batch already specified for material".Here is the detail for your analysis-
    Batch in item 000010 already specified for material 2000978
    Message no. VL221
    Diagnosis
    The batch was either predefined in the sales order that the delivery is based on or it was assigned to the delivery item manually. Therefore, you can no longer carry out a batch split for the delivery quantity of the items.
    Procedure
    In order to make the batch split possible, you can cancel the assignment of the delivery item to the batch, if the delivery's processing status allows.
    Kindly advise.
    Thanks in advance,
    Randhir

    Thanks Mr. P Gomatheeswaran,
    Now batch is not being determined during sales order creation, that's fine.While creating delivery,when I select line item and go to Batch split tab I can see batches being split in two, which is OK. But when I try to put Picking quantity as delivery qty, system says "Picked quantity is larger than the qty to be delivered".(Message no. VL019).
    Also Storage location field is grayed out.
    Regards,
    Randhir

  • Time-split not allowed for routines with return tables

    I've had this issue a couple of times.  It was usually a date field was incorrect.  I have not made any changes concerning update rules.  Any ideas?
    Thanks everyone!
    -Ryan.

    Hi,
    Normally, the date format is common accross R/3 and BW so as long as it is
    stright forward date value then you won't get any errors.
    else, if you are using date field and trying to assign to a fisacl period or Fiscal year
    then you would have to sub string the date and manipulate accordinly..
    like ex: BUDAT+(6) : 200702
                BUDAT+(4): 2007
                BUDAT+4(2) : 02
    Hope this helps..
    assign points if useful..
    Cheers,
    Pattan.

  • Error multiple batches not allowed

    HI,
    while adding the delivery document i am getting one error, the error is multiple batch is not allowed.This issue occurred for the 1st time.
    Regards-
    Mona.

    Dear Gordon,
    Thanks for your reply but it was working earlier.Actually this is related to add on.
    Regards-
    Monica.

  • Inspn For 103 Movnt Type UD Not allowing without Batch

    Hi Experts
    We have one scenario : For Incoming materials we are doing 103 GR Block stock and system
    not asking  any batch during MIGO.And after quality inspection (RR) 105 Block stock to unrestricted
    (Here we are entering the batch). But before this we need to take UD for the lot
    but system is not allowing me to do UD without Batch. For time being we are doing stock posting only.
    Kindly advise me how can I take UD without Batch for 103 inspection lots.
    Inadvance Thanks
    Shiva Patil

    Hi Vishal / Sanil,
    The problem is QM don't want create this batch we have suggested this they want system should assign automatically. In 103 there is no such a way that MM can enter this batch. QM is asking we haven't entered the batch in 103 so we want this lot need to be close without Batch.
    1) Which sap note is suitable for this kindly suggest me
    Thanks
    Shiva Patil

  • Batches are not coming in invoice where there is batch split in delivery

    Hi all,
    Batch split quantity as per delivery is not coming in billing document.
    Ex
    1). Sales order created with Material "A" - 50 Kgs
    2). Delevery is created
    Material A - 10Kgs - Batch 1
    Materail A- 15KGs - Batch 2
    Material A - 10Kgs - Batch 3
    3). iNVOICE IS CREATED For cumulative quantitiy in single line like
    Material -A -25 KGS - Rs.10,000
    it's conderind other two lines for batch split quantities with 0' quantities and 0 values
    Please advise what should be done if i need to create invoice --
    Material A - 10Kgs - Rs.2000
    Materail A- 15KGs - Rs.4000
    Material A - 10Kgs -Rs.2000
    I.e. An invoice should be created with batch split quantities.
    And when i create a return order with the reference of this invoice it should take all the respective batches as per batch split.
    Please advise.

    hI,
    Go to vtlf  copy controls in item data  vbrk/vbrp give 001  try this it my work out.
    Best regards,
    venkataswamy.y

  • Item category not defined in batch split in vl02n

    HI GUrus,
    cna anybody please helpe me with this. We have to send 3 differnt batches of parts to the vendor via returns PO. when i go to vl02n and click on batch split to send out batch A - 5 EA, Batch B - 5 ea and Batch C - 5 ea. the system is throwing eerror messages like item category not defined. please help me with this
    thanks
    anusha

    I can't understand what are you doing...
    1. You already asked this question - it was answered
    2. Link is pasted in my previous message.
    Please read your previous question (that was the same) - please read the answer too. That's all.

  • Batch Split in OBD & billed for the entire Quantity .RG1  register does not update the excise values

    Hi All,
    I am new here . We have batch split in Delivery and 601 happens for the individual batches and billing we bill for the entire quantity . Hence the RG1 does not update the excise values for the batches and it is showing as zero (upon extraction in J2I6). Upon research through the program the latest note which i presume is patched
    The latest note is N158234 which does not show in the program but seems have been patched considering we are using the Latest version of SAP .
    As you see above in the billing we have billed for the whole quantity but RG1 does not update for the since the batches are zero .
    My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split .
    Now i have checked few other projects in my company and they all seems to be following the program . So i am wondering whether my process or some customization is missing .
    Sales order (no batch determination)  , in delivery the batches are picked through wm to and batch split happens in the delivery . Then billling for the whole quantity . We have automatic excise invoice creation enabled so no J1IIN .
    Can somebody help me .
    Thank you

    My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split
    Which field (H & J) they were referring in VBFA ?
    i have checked few other projects in my company and they all seems to be following the program
    How about the other projects' values in VBFA where your techinical team is guessing some issue.  Have you compared this?
    Since you have already the note 158234 implemented in your system, ideally, you should not face any issue.
    G. Lakshmipathi

  • Item not relevant for billing-Batch Split

    Dear all
    Item is not relevant for billing for Batch Split item. i have checked item category, item category determination and copy control.
    The scenario is working fine for local and export but for deemed export the item is not relevant for billing
    Please kindly guide what else to check
    Regards
    Sandeep Bhowmick

    Kindly check the Batch Split - Item Category in VOV7 with the Billing Relevance as "M".
    Best Regards,
    Ankur

  • Batch numbers does not appear as batch split in DO level

    Hi All,
    I have currently configure batch determination as SO level. The batch number appears in SO alright but when my stock is insufficient for one batch, it doesn't take from another batch. My DO will only show one line item and doesn't allow me to do manual batch split. It is supposed to show all the available stock from other batches that it can take from.
    Kindly advise as soon as possible.
    Thank you!

    Reply by fpn:
    babowa answer was correct as follows:
    1. iWork (including Pages) once loaded by DVD DOES update via the Apple menu/Software Update function.
    2. Aperture 3.0 updates via S/U.
    BUT IT FIRST REQUIRED: a "fresh" key to register on my new iMac desktop. (from Aperture-Help phone-line).
    Question is now answered!
    fpn

  • Gross Wt & Net Wt not copied from delivery to invoice in batch split

    Hi Frnds,
    We are appling a manual Header Frieght condition Type (HD00) to a delivery with batch split.
    In the delivery this value(HD00) is splitted between line items based on Gross weight. But when we create the invoice for this delivery, the batch split line items do not have gross weight and net weight, and thus there is no value for HD00 in invoice.
    Please provide us any pointers if you have encountered any such issue...
    Many thanks in advance...
    Regards,
    Karthick C

    Hi Karthick
    This is expected in case of Batch split scenario, because in the sales order there is no batch split and in delivery there is batch split.
    You create invoice w.r. to delivery, But in copy control, you have  mentioned the price source as Order only.
    Also the child items in the batch split are not relevant for billing and hence , if you see the item category of the child item in VOV7, u can see that it is not relevant for billing. Hence the value of the invoice having the line items alone will also be zero.
    However the parent item will have gross weight and net weight in the screen.
    If you maintain the price source as Order and Delivery, there is a possibility that you can get HD00 in invoice.The billing quantity in this case in copy control shoudl be either G or H. Based on this value, you can get either one invoice for both parent and child items or two different invoices one for parent and another for child items.

  • Note 951952 - Incorrect excise values if batch split in MIGO for import PO

    Dear participants,
    We have applied Note 951952 - Incorrect excise values if batch split in MIGO for import PO,
    for following issue,
    While doing import goods receipt for batch split quantity,
    excise base value is calculating for entire amount not by splitted quantity.
    We are unable to solve this issue.
    We are using SAP ECC release 6.0 level 11 whether above mentioned note can be applied or else any other
    new notes to apply solve this issue.
    Advance thanks
    Regards,
    A.Jeyakanthan

    Thanks for reply,will check note is applicable for current package level.
    Actually we found excise base value is same for GR of batch split quantities for same material
    with valuation type import duty free.

  • System not allowing to assign the master batch in Equipment

    Dear PM Guru's,
    I am trying to rotables managment process through installation and dismantling process. Material created with different valuation types and serial number profiles. Stock updated for valuation type REPAIRED & NEW. For TOBE REPAIRED, there is no stock updation. Now i want to update the stock by dismantling the equipment from superior equipment through IE4N. In IE4NCGP, i maintained the movementy types are 261(For installation) 262 (Dismantlation) and i am trying to execute IE4N transaction code. When i am trying to save the business transaction system throw following message "material document batch differ from equipment master batch". How we can assign the master batch? if its not in stock and its already installed in equipment i want to bring that one into stock as "TOBEREPAIRED" with movement type "262". I am requesting all the PM experts who ever done this process earlier please share the documents if possible.

    We want to enter only PAN number in XK01/ XK02. But the system is not allowing us to save until we enter all the details.
    Its not necessary that all Vendors will have CS, LST no. or Excise details. This is the reason I am looking for a way how to make these fields optional and I am fine with it as long as system does not give any error. Because system is not allowing us to save the Vendor master, I wanted to deactivate CIN in Vendor Master.
    Kindly suggest how to make the CIN fields optional. Your temporary solution (DOT) is working fine, still we want a permanent solution.

  • Can not Batch split outbound delivery

    Hi All,
    I have a 1 SO, when I create outbound delivery, I press batch split but has 1 message appear "Actual delivery quantity for Item 000010  is 0, split is not necessary"
    I check in Location, still have more qty (Unrestricted use) than in SO.
    How can I create outbound ?

    Hi,
    What is the delivery quantity shown in the delivery document. If the quantity is 0 or empty, then batch split is not possible. The quantity can be 0 only if
    1. There is no stock in the plant/storage location
    2. The stock requirement in this case is a special stock and there is no special stock reserved for the sales order.
    3. There is no material available in multiple batches in plant/storage location. All the materials belong to single batch.
    Find out what is ur scenario. Accordingly create stock in the plant/storage location with multiple batches. For ex you can create 100 units of materials with batch 12345 and then another 100 units of same material with batch 6789. If it has to be a reserved stock, then assign the sales order and item to these stocks.
    If this is done and if you create the delivery on the confirmed schedule line date, you should be able to split the quantity between various batches.
    Hope this helps you

  • Leave to transaction "SAPMF05L" not allowed in batch input

    Hello,
    When we run FF.5 with the file sent from Itaú, it is generated a batch input for transaction FB02 which updates the reference key 1, 2 and 3 (XREF1, XREF2 and XREF3) in the documents.
    There are some cases where the batch input does not update all the document items. For example, I got a document that has 32 items to be updated with the reference keys, but the update is only done in the first 14 document items. I observed that the batch input only updates up to number 14 because the standard program does not u201Cscroll the baru201D to check if there are more items in the document to be updated. The batch input is having trouble and generating some incorrect transactions and showing the error message: LEAVE TO TRANSACTION u201CSAPMF05Lu201D not allowed in batch input.
    I tried to find a SAP note, but couldnu2019t find anything that was related to this. Does anyone got this problem and maybe can help me?
    Thanks,
    Leandro

    if you want to leave a batch session try "/bend" or "/n" to move to the next record.

Maybe you are looking for