Batch stock table / mmbe table
Hello gurus,
I want to know where I can get the values in the MMBE table.
I want to create a query that would show me the stocks per batch of a material. Can you help me out?
Thanks in advance
Edited by: obie villamosa on Jun 20, 2008 4:20 PM
yes i have already created the query using that. however, whenever i sort it by batch number, the query shows me multiple lines of the same batch number, with the same unrestricted qty.
example:
BATCH1 1000
BATCH1 1000
BATCH1 1000
BACTH2 2000
total 3000
Similar Messages
-
Does table MCHB (batch stocks) contain both valuated and non valuated stock
Hello
Does table MCHB (batch stocks) contain both valuated and non valuated stock?
Is it possible that material has both valuated and non valuated stock for the same plant and storage location?
ThanksHi ,
Most of your queries has been answered by Jurgen.
1)Does valuated or non valuated is linked with valuation type? yes ..if the material is valuated then only there is valuation type.It is used for split valuation .
2)Where can I see whether material is valuated on plant or not?
to check the valuation level IMG >Enterprise Structure>Definition>Logistics - General>Define valuation level
and to check value and quantity updation at plant level check
IMG >Logistics - General>Material Master>Basic Settings>Material Types-->Define Attributes of Material Types
3)Case1
I want material A to be valuated at the plant without split valuation
Case
I want material B to have 0 value at plant
go as Jurgen has recommanded in the previous post . for material B used different material type which is not valuated at that plant .
Regards,
Anupam -
hi friends,
is there any table for sales order stock in sap.
with regards
BhupiHIIII
Batch Stock - MCH1, MCHA, MCHB '
Valued Stock - MBEW
Sales order Stock - MSKA ,
Project Stock - MSPR
Storage Location stock - MARD,
Stock with vendor - MSLB,
Special Stocks from Vendor - MKOL
Special Stocks with Customer - MSKU
Reading View of Stock Transfer Reservations - MDUR
Reading View of Stock Transport Order for Release Order - MDUB
Sales Requirement Totals Record - VBBS
Data Base View of Production Order for MD - MDFA -
What is imp of Batch indicator in Stock Overview MMBE
What is imp of Batch indicator in Stock Overview MMBE
MadanMadan,
I assume we are talking about the "Batch" check box in the "Select Display levels" section.
if this check box is activated, system displays the stock details at the Batch level also. Basically the aggregation of stock happens like this..
Batch Stock
Storage Location Stock (Cumulation of Batch Stock in that Storage Location)
Plant Stock (Cumulation of all Storage Location stock in that plant)
Hope this helps....Reward your points if so,
Regards,
Prasobh -
Special Stock table and F.01
Dear All,
I have 1 inventory GL Account but all the inventory transactions are using "special stock".
I want to know are there any special stock tables that have material summary which have amount and quantity, but the amount of summary have the same amount with the GL Account?
for example : from table S039 i can get the summary of inventory that have same amount with the GL Account, but the problem it can't for special stock
Thanks,
Ferrythanks a lot Jurgen for the answers, now i know there is no table for the summary, so i should using some tables to make the summary
Regards,
Ferry -
New Stock tables in 8.8
Hi Forum,
I am tring to create a new valuation report in Crystal with the new Stock tables.
OILM, OINV. Also i noticed IVL1, OIVQ & OIVE.
Which tables do i need to link to get a valuation report with FIFO method.
The reports that i have stop giving us the info we need andi need to get new reports running before end of month.
I really don't know what happened but as soon as we upgraded to 8.1 the Crstal reports that include OINM are not working properly.
An Adivse will be grealt appreciatted.
Regards,
Manuel RomanHi Gordon,
Linking OIVL--> OIVQ did the trick for non-serial items and linking OSRI worked for serialized items...
Works fine and speed wise is even faster than the original report.
Thanks for all your help..
Regards,
Manuel -
When MSKA (Sales Order Stock) table get updated?
Hi,
May I know when MSKA(Sales Order Stock) table get updated?
Regards,
thiyagusuppose a sales order has been created of 10 MTS and Production Person give me 5 MTS against the sales order by creating Planned Order& Production Order wrt Sales Order,then 5 MTS will be updated into Unrestricted - Use.
If suppose Material is Return Delivery ,then after MIGO , it goes to Quality Inspection,then this Quantity will Updated in to Stock in Quality Inspection .
Hope ,it will help you.
Best Regards,
Ankur -
Transaction to view the Batch Stock as on any date
Is there any Transaction to view the Batch Stock as on any date?
Regrads
SoumenI had already tried this. But it does not show the batches, it shows the material docs with batches.
I want like this:
Material Batch S Stock
Regards -
How to do STO of expired batch stock
Hi,
How can I do STO for expired batch stock? i need to do it for scrapping which is handled in other plant.
Thanks in advance.
NinadHi
I suppose the expired batch is blocked stock & for doing the STO, we need to bring the stock to unrestricted. What you can do is, create one separate new storage location in which there wont be any other stock available. Move the expired blocked stock to unrestricted stock in this storage location. Process the STO cycle with this storage location. In recieving location, stock can be again recieved in quality stock & can be treated for further process i.e scrapping.
Thanks
Sachin -
No batches/stocks were found - determination is performed online MFBF
Hi Gurus,
Can anybody please help me why we are getting this message in MFBF.
When the user is trying to turn in production for material A in MFBF, and when they hit post with correction in the home screen of MFBF, in the next screen the system gives a message "No batches/stocks were found - (Batch) determination is performed online" . In this screen we have the component B under the material A which was entered in the first screen. Part B is batch managed, and there are batches also in the system, but the system is not automatically picking up the batches for part B. Why is this happening?
Thanks
Anushadear Anusha
please look here:
http://help.sap.com/saphelp_47x200/helpdata/en/25/283aac4f7811d18a150000e816ae6e/frameset.htm
focus your attention into Production (PP/PP-PI) - Batch Determination in Production/Manufacturing
just click on that link -
No batches/stocks were found (Batch) determination is performed online erro
Hi Gurus,
Can anybody please help me with this. When the user is trying to turn in production for material A in MFBF, and when they hit post with backflush, the system gives a message No batches/stocks were found - (Batch) determination is performed online in the next screen. In this screen we have the component B under the materia lA which was entered in the first screen. Part B is batch managed, and there are batched also in the system, but the dettermination is not occuring.
Thanks
Anushadear Anusha
please look here:
http://help.sap.com/saphelp_47x200/helpdata/en/25/283aac4f7811d18a150000e816ae6e/frameset.htm
focus your attention into Production (PP/PP-PI) - Batch Determination in Production/Manufacturing
just click on that link -
Hi
can any one tell me what is on order stock in mmbe transaction when it will get increaesed or decreased
KumaraswamyHi
On order stock is your Open PO for that material that is PO created and waiting for GR.
regards
Antony -
Batch / Stock Category Issue
Dear All,
I have a scenario where a single material in a purchase order has different stock categories as below:
PO/LI - 10 Mat A US
20 Mat A FR
30 Mat A AG
When the GRN is done, ideally for the different stock categories the created system batch should be different, but in my system a single batch gets created for all the stock categories. As per my understanding the relationship between Batch & Stock Category is ONE to ONE. But how could it is be possible that the system replicates the same batch for the different stock categories for a given GRN instance ( in a single material document)
In the material master, the discrete batch is maintained and also the batch management tick is maintained.
Any reasons as to why this is happenning and how i could rectify this
Regards
Shabeen BuharyWhat "stock category" means? "US", "FR", "AG"?
Are you speaking about valuation types?
How batch number ssignment is set in the system? Please check it - maybe user exit SAPLV01Z is used --> revise the logic of it with the help of an ABAPer.
In your example I can see separate line items - you should be able to set the system to assign different batch numbers to the items (via user exit).
Regards,
Csaba -
How to report on batch stock balances
Hi All,
I would like to report on batch stocks over a period of time.
How can I get the valid stock balances for a batch for each batch managed plant material for a given time period. I know we can use MCHA, MCHB/H.
Can you kindly clarify the logic to reconstruct the batch stock balance each month for a batch managed plant.
Thanks
KarenHi Mischa.
I think you can achieve what you want like this
Add the Start Month and End Month (let them be IO's that reference 0calmonth) to your cube and populate them in the load using a formula, like Aron suggested.
Create a query with a restricted key figure. I suppose you are looking at some kind of count to know how many people where absent in a given month, or something like that. Thus, add your KF to the structure and add the Start Month and End Month to the selection.
Restrict the Start Month using a variable, ZMONTH (this is what the user will enter at runtime), as follows:
Start Month <= ZMONTH.
Now restrict the End Month using a variable, XMONTH (this will have to be an exit variable filled in CMOD by reading ZMONTH) as follows:
End Month >= XMONTH.
Thus, your restricted key figure will only return values if the entered month is part of the absence interval. The abap you need for CMOD should be simple as all you are doing is reading a variable and passing it to another. From the top of my head, it should look something like this:
data:
l_s_range type rsr_s_rangesid,
loc_var_range like rrrangeexit.
case i_vnam.
the case statement will likely already be there, as well as the above definitions, so look for the case and insert the below
when 'XMONTH'.
if i_step = 2.
clear l_s_range.
loop at i_t_var_range into loc_var_range
where vnam = 'ZMONTH'.
l_s_range-low = loc_var_range-low.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
append l_s_range to e_t_range.
endloop.
endif.
endcase.
this will likely already be there, so you won't need to put it there again.
Good luck!
Jacob
Edited by: Jacob Jansen on Jan 11, 2010 9:18 PM
Edited by: Jacob Jansen on Jan 11, 2010 9:30 PM -
How to upload the batch stock to bin level
Dear gurus
My client are going to implement WM i want to know how to upload existing batch stock to bin level.
regards
sam
Edited by: Csaba Szommer on May 25, 2011 12:10 PMHi,
You can use LSMW for Tcode LT01 to upload inital stock in WH.
So here u can enter all relevant data required like material, qty, batch, plant, Sloc etc..
Hope this helps you...
Rgds,
Kris.
Maybe you are looking for
-
Reading text file from forms6i
hi all , i want to read a text file how can i classify its coordinates (columns) to insert it into different columns of a table . i want that first ten characters of text file will go in first column of table , next 5 characters will go into 2nd colu
-
System refresh activity in Development Box
Hi Guru's I have requirement for system refresh activity in development system and i would like to know what are pre-activity required for this other than when compared to normal system refresh and also please share me any link or snote related to th
-
Including one more gl in submit
Hi frnds... I am using the below submit in my program my issue is that i want to include another Gl into the same submit ie, either 302205 or 400020 satisfying should get executed now in the below code only one gl is added...is there any other way i
-
Need help about RRD4J, get data from rrdb
i need more help about roundrobin database, especially using RRD4J library. i want to know, if i have one file database data1.rrd and i specific want to get data from startTime to endTime. how i can get that data from that database, and move them to
-
SLD , Error Import during SAP_CR 6.0
Hello, I'm trying to import upgrade the content SAP_CR from the current version 5.0 to version 6.0 on runing SLD server. Errors are appeared: Status: Error during import: com.sap.sld.api.wbem.exception.CIMException: CIM_ERR_FAILED: Can not create SAP