Batch Traceability for Sugar as raw material during the production process

Dear Colleague ,
I need your support for a traceability issue in a customer on beverage sector
See the case below:
Batch Traceability for Sugar as raw material during the production process
In AMSB the batch traceability in some production processes is very difficult, especially in case of sugar where tanks wherein more than one batches of the same material can be mixed. For example, in a single day almost 17-20 batches of the same material can be mixed and as the result is a composition of water and sugar the normal FIFO rule strategy cannot be applied during the component consumption.
The raw material (sugar) is received in tank S5 at different points of time, and its content is transferred to tank B1 for storage purposes as well as for mix the sugar with other material such as water.
At a specific moment the S5 tank contains only a single batch, while the tank B1 contains more than one batch. Tank B1 is used in order to supply the production line and the corresponding material consumption is triggered in backflush as soon as the production activity is declared (production confirmation). Along with the material consumption the batch determination takes place and a complex algorithm is applied: at a very high level, the single batch is consumed depending on its percentage inside the mix of composition and in case the this
percentage is under a threshold level the current batch should be full used in order to avoid that it will exist for ever.
Moreover, the good movement reversal (reversal of material consumption) and its correction lead to a complete new calculation of all the batches consumed after the original movement date/time. This means that the algorithm for batch determination should be reapplied for all the consumptions subsequent to the original movement.
On the other hand it’s not possible to identify the mix of batches at the exit point of silos B1 because the total consumption of the material in the tank will never happen. As long as the tank level decreases it will be filled up from the tank used for receiving of sugar (S5).
As requirement AMSB needs to post the material consumption starting from EWM, this means that EWM should be the master system in this case and the correspondingmovements have to be  transferred to ECC afterwards. This mainly because EWM  should guarantee the business continuity in case the ERP system is not available.
AMSB asked if the scenario depicted has been implemented in some customer, in EWM system or in any other SAP solution.

Hi ,
At the time of consumption you can put ' * ' aestrix sign in the batch field.
You will get list of batches of that material.select ur batch and consume the quantity.
Regards
Piyush

Similar Messages

  • Availability check of raw material during sale order processing

    Dear experts,
                           When i am entering the finished good in sale order processing,system should check the raw material availabilty.Is it possible in STD sap
    Regards,
    murali.R

    thanks to you all for your reply,
    My customer is bright bar manufacturer,They just buy the steel bar & process it & sell it to the customer.So there is only one RAW MATERIAL.
    Their all the activities are mainly based on raw material.So customer wants.....when we enter the finished good system should check the RM stock,based on RM STOCK,sytem should do the availability check...& confirm the delivery date
    I have mapped customer requirement,after modifying item category & assignment......
    Sales BOM explosion & delivery group is maintained for header material.availability check is on at component level & header level.So now system consider the raw material stock & it conform the dates when  i do availability check combinely.
    I would like to know how it will affet the MRP incase of alternative BOM....FURTHER PROCESSING
    Is it the right practise.....Please reply...............

  • Stop excess raw material consumption against production order

    Hello
    Please Guide
    Is there any  control to Stop the excess or less consumption of raw material against the Production Order confirmation.
    Eg
    Prod order Qty - 10
    Ram material reqd A- 10 piece & B- 10 Piece
    So now Order confirmation Qty - 10
    raw material consumption A - 10 & B- 10
    so for A or B if i want to issue (261) excess or Less qty than system should not allow this. System response to be as an error message in case I increase or decrease the Qty of A or B other than 10 against the prod order confirmation of qty 10.

    Hi,
    You have to use user exit only to avoid it.
    1.CONFPP02 - for checking good issue during confirmation
    2.MBCF0002 - for Checking Confirmations during the Goods receipt.
    For this you need to Use the User Exit:
    Enhancement - MBCF0002
    Functional Module - EXIT_SAPMM07M_001
    Include - ZXMBCU02
    Regards,
    R.Brahmankar
    Edited by: R Brahmankar on Sep 9, 2008 12:41 PM

  • How to including the finished goods as raw material to the other FG?

    Hi Gurus,
    Have a nice day!
    We would like to create production order for our semi finished goods and then we will doing confirmation. After we have produced our semi finished goods, we would like to include it in the bom as raw materials for our final FG. But how to handle this situation? Any suggestion on how the procedure to do it that the cost will not be double..when confirming the semi FG production it will generate cost for the usages of it raw materials. The semi FG is valuated then when i included it as raw material into Final FG it will generate cost for consumption in doing confirmation. I dont know the correct term for this scenario. In other word or semi FG will be part as a raw material to the next production.
    Please advise if you have been encountered the same scenario with me.
    Thanks ,
    Weldin

    Hello Gurus,
    Thanks julian for contributing your idea. I really appreciated it.
    Right now all activity in manufacturing FG is combine in one production order. Let say we have two activity one is the extrusion and the other one is bagging and printing. From our current set up, we would like to separate the activity. The idea is one production order for extrusion serve as semi-finished good. Then this semi-FG will be added in the component of our final FG which is the bagging and printing because in actual transaction that would be the procedure. Theoritically, we would like to separate the cost of extrusion activity to bagging activity. That is why we will be trying to figure out how to do it right for the analysis purposes.
    Other of my idea is when  i will set the semi FG to non valuated material. So that when i add  the semi FG as component to our Final FG no double costing happen. But when we will run the costing run it will compute low cost in terms of standard price for our final product.
    Thanks and best regards,
    Weldin angelo

  • Early batch opening for order item is activated in the QM data settings

    Hi Team
    I am not able to generate inspection lot inspite maintaining 04 inspection type in QM view.
    Getting this message - ( Make sure that an inspection type for inspection lot origin (03) or for inspection lot origin 04 with
    early batch opening for order item is activated in the QM inspection data. )
    Please suggest me required settings.
    Thanks

    Hi
    Go to MM02 select the QM view
    Clcik the inspection setup button
    Select the inspection type 04 detail icon in right corner.
    in that screen Control insLot field select the  Y Early lot creation for the order item.
    Save
    Thanks
    S.Murali

  • The hard drive on our computer died and we lost all of our purchases in the account. Is there a way to recover the songs we have paid for? If we plug in our iPod to a new account, won't it erase everything during the synch process? Help!

    The hard drive on our computer died and we lost all of our purchases in the account. Is there a way to recover the songs we have paid for? If we plug in our iPod to a new account, won't it erase everything during the synch process? Help!

    If for some reason you have failed to maintain a backup copy of your computer ( not good), then transfer purchases form your ipod.
    Without syncing, click File>Transfer Purchases

  • Hi there! So I am using Lightroom 3 on a pc and I have ran into an issue when exporting images. The DPI and image size (in inches) that I am selecting during the export process. For example I just exported a collection and set the dpi to 180 and the size

    Hi there! So I am using Lightroom 3 on a pc and I have ran into an issue when exporting images. The DPI and image size (in inches) that I am selecting during the export process. For example I just exported a collection and set the dpi to 180 and the size to 7 inches on the long edge. My exported result is 457 dpi and sized at 3200x2134 pixels.. Any ideas on why this is happening and what I can do to correct it?

    The DPI setting in a digital image has no meaning at all. You need to learn how to calculate what you need in your exported image. The only measurement in a digital image that has any meaning is the number of pixels in each direction. It doesn't matter what you set that DPI to (actually it's PPI or pixels per inch). The image will have the same number of pixels regardless of the setting. If you need an image that is 5 x 7" (for example) at 200 PPI then you would want an image that measured:
    5 x 200 = 1000 pixels
    7 x 200 = 1400 pixels
    So you would need an image that is 1000 x 1400 pixels to have a 5 x 7" image at 200 PPI. The reason your exported image had such a high PPI setting is because you specified the number of inches you wanted the image to be. And there were enough pixels in the image that it calculated out to be that high PPI setting.
    I apologize, I don't explain this very well. But you need to learn to do the math to determine how large you really want your exported images to be.

  • An error occurred during the submit process. Authorization is required for this network service

    Dear Guru,
         I have found error message when I submit form. The form show message "An error occured during the submit process. Authorization is required for this network service." If the form work correctly, it should trigger email with this form. Can somebody help me to find out the solutions?
    Thanks a lot.
    Wiriya C.

    I am also facing same error.
    Please let me know if you have resolved problem.

  • How does Roll up of cost of scrapped material to the product happens

    Dear Friends,
    We are using ECC6.00 (EHP4) with CO module also implemented. in QM module we use notification type Q3 to scrap material which is rejected in the production order. Using transaction CO11N, we book scrap in the order and using the function module in the notification we carry out reverse order qty and scrap which is nothing but 262 and 551 combined.
    To be more specific if i create a notification for material M1 then when i use the function module (action box) system will reverse the material (262) from the production order  and the  scrap using  551 movement.
    The variance is booked in the order. Now that for some of the materials users have done 551 alone without reversing the material from the production order. According to the 262 and 551, the same is configured so that the value of scrap occuring in the production order should inflate the product cost during the costing run (roll up of the cost)
    Now user wants to be explained on the differences in the cost between both the type of scrapping done (262&551)and 551 alone. i.e., for periods where 262 and 551, the material cost should have been increased and for the other 551 posting there should not be any effect of the material cost.
    Kindly tell me how this can be explained. Also provide the complete steps for carrying out the costing run to do actual costing and standard costing run.
    Experts help will be very useful.
    Regards,
    M.M

    [http://help.sap.com/saphelp_erp60_sp/helpdata/en/5f/1faba54aee11d189740000e8322d00/frameset.htm]

  • Crashes during the save process

    Okay, so now that we’ve determined that I DO have the PrE 8.0.1 update/patch… I need to figure out why I am unable to save the video I’ve spent days working on.
    As I stated in the last discussion concerning the update, I am in possession of a fairly high-speed computer that should be able to handle this kind of work.
    I believe I’ve seen some other folks having problems because of the type of video they are using or importing… What kind of video should I convert to if PrE 8.0.1 doesn’t like what I am using? Oh and I have gotten the message to “Save often because you are running low on system memory” WHICH IS UNBELIEVABLE!!!
    So here we go. The video that I am trying to save is approx. 10 minutes in length and is made up of still .jpg photos and videos taken from a Canon SX210 IS. I sure hope that is helpful. I looked at the file types and they are .mov files.
    One other thing that may be helpful in identifying the problem… and is quite interesting… after the program crashes during the saving process, I can always go to the save location and find the entire PLAYABLE video saved in the format that I wanted (which was MP4). The only thing is that there are three separate files. 1) Complete clear audio 2) Complete clear video and 3) A third unknown file type that I can’t open. Quite strange. Oh and if you’re wondering if I tried to add open those two (Audio and Video) files in PrE and save them together yes, I did… And it crashed again.
    Bob

    Bob,
    Here is SOMETHING to think about, regarding the Memory/Resources error messages.
    This ARTICLE might be helpful at finding clues as to what could be causing the problem.
    The links in this ARTICLE will help provide you with some very useful tools for checking programs and Processes, like Process Explorer.
    As for the inability to Save, I would try a Save_As, and see if that helps, and does the trick. If not, try Save_As_a_Copy.
    When you do Save, do you get any error messages, or does the program just not Save the Project file (.PREL)?
    In case it's a system issue, can you tell us about your system in detail? Aspects like the I/O sub-system, i.e. the HDD's, their size, speed, free space, controller type(s) and how they are allocated, will be very useful.
    If you are working with SD material, converting to DV-AVI Type II w/ 48KHz 16-bit PCM/WAV Audio, will be as good as it gets.
    Good luck,
    Hunt

  • Problem: An error occured during the uploading process.

    Hello!  I've searched around but I am having difficulty finding a solution to this problem.
    I am trying to upload videos through Adobe Premiere Elements 9 to YouTube, using the preset options in the share tab.  This worked previously without issue, but then one day I continually ran into an error stating "Sorry, an error occured during the uploading process.  Please try again later."  However, it eventually started working.  It is now a few weeks later, and I am having the very same issue.  I am unable to upload to YouTube or any other service through the Share tab.  Even loading the software itself, the opening splash screen is unable to grab my Adobe ID.  It never stops "Gathering User Info..."
    Steps I have tried:
    Going to Edit -> Preferences -> Web Sharing and hitting the refresh button to update settings.
    Checked router settings.
    Enabled DMZ on router and linked it to this specific computer.
    Rebooted PC and router, and tried updating the Web Sharing settings multiple times.
    I honestly do not believe it to be a router issue, especially since it is currently in DMZ mode and I have had absolutely no trouble with any other software.  This has continued to baffle me though, and finding help is difficult.  Searches keep giving me encoding settings for YouTube videos, and few results pertain to this particular issue.
    I am aware I could export the video normally and upload through YouTube that way, but on DSL, my upload speed is pretty terrible for a high quality video.  The YouTube HD setting has been great for me in the past, as files are small but still look great online.  I would really like to get it working again, both for ease and convenience for simple projects.
    If anyone has any ideas as to what could be causing a problem, I would be greatly appreciative of any advice.  In regards to the project itself, there is no real editing being done at this point, as I am trying to eliminate any possibility of error elsewhere. I opened a new project, added a video clip and went directly to upload it, resulting in the error above.
    I don't believe it matters in this situation, but just in case:
    Windows 7
    AMD Phenom II X4 820 - 2.80 GHz
    6 GB RAM
    Radeon HD 5880 1GB
    Connecting through a Netgear WNDR3400 router, standard DSL connection.

    Sorry, not seeing where to edit my original post.
    Just wanted to add, that I am able to visit both the Photoshop.com website, as well as YouTube through my browser.  So I am not being blocked somehow to those particular sites.  It only seems to be through the software that I cannot connect to any of the online services to upload videos to.
    Additionally, the only virus software running is Microsoft Security Essentials.  It has never raised a flag before with this software or caused interference in the past.  I do not use Norton or any other service which are known to interfere with programs often.
    Just a quick example as well, pinging Photoshop.com through the command prompt shows I am getting through just fine.  As you can see in this image though, it cannot seem to ever connect and grab my user information.
    http://i.imgur.com/S53xN.png

  • An error occurred during the installation process: error occurred while installing additional adobe

    I get this message: An error occurred during the installation process: error occurred while installing additional adobe packages. when trying to install CS2 InDesign UPGRADE from id 2 on new IMAC 2.4 GHz 4 GB. 

Any one else with same issue? 

Trevor

    These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
    Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
    If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

  • Error: "Application error occurred during the request processing

    Hello,
    I have successfully installed NW7 CE with MaxDB database. Then trying to logon to NWA/User Admin etc, & couldn't logon. Getting the following error.
    I am using Internet exploreer 7
      500   Internal Server Error
      SAP NetWeaver Application Server 7.11 / AS Java 7.11 
      Error: "Application error occurred during the request processing."
      Troubleshooting Guide https://sdn.sap.com/irj/sdn/wiki?path=/display/jsts/home
    Details: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to retrieve client for current request. Causing exception is  nested.
         at com.sap.tc.webdynpro.clientserver.task.Task.getClient(Task.java:493)
         at com.sap.tc.webdynpro.serverimpl.wdc.um.ClientUserFactory.checkAuthentication(ClientUserFactory.java:200)
         at com.sap.tc.webdynpro.serverimpl.core.um.AbstractClientUserFactory$1.checkAuthentication(AbstractClientUserFactory.java:151)
         at com.sap.tc.webdynpro.services.sal.um.api.WDClientUser.checkAuthentication(WDClientUser.java:214)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.checkAuthentication(RequestManager.java:713)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:237)
         at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.delegateToRequestManager(AbstractExecutionContextDispatcher.java:202)
         at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.DispatchHandlerForRequestManager.doService(DispatchHandlerForRequestManager.java:38)
         at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.AbstractDispatchHandler.service(AbstractDispatchHandler.java:127)
         at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:95)
         at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.ExecutionContextDispatcher.dispatchToRequestManager(ExecutionContextDispatcher.java:140)
         at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:92)
         at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:104)
         at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doContent(AbstractDispatcherServlet.java:87)
         at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doGet(AbstractDispatcherServlet.java:54)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:140)
         at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:37)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:466)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:291)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:396)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:385)
         at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:48)
         at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
         at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:76)
         at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
         at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:240)
         at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
         at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:78)
         at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
         at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
         at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
         at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
         at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
         at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
         at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
         at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
         at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
         at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
         at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
         at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:43)
         at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
         at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
         at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:42)
         at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
         at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
         at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:425)
         at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:250)
         at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:45)
         at com.sap.engine.core.thread.execution.Executable.run(Executable.java:109)
         at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:314)
    Caused by: com.sap.tc.webdynpro.services.cal.core.exceptions.WDClientException: Found no client: clientNameReqParam=null, clientNameAppParam=null, useragent=Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.2; Trident/4.0; GTB6; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)
         at com.sap.tc.webdynpro.clientserver.cal.ClientInspector.findClientContainer(ClientInspector.java:212)
         at com.sap.tc.webdynpro.clientserver.cal.ClientInspector.getClient(ClientInspector.java:104)
         at com.sap.tc.webdynpro.clientserver.task.Task.getClient(Task.java:491)
         ... 51 more
    Checked hostname resolution, check any network issues...everything looks good. Suggest a solution.

    It's a problem with the browser.
    Please try the following possiblities:
    - use a different browser or at least a different IE-Version
    - restart the problems (helped me several times)
    - try comptability view in IE
    Regards
    Adrian

  • Error occurred during the login process

    Error: A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (.Net SqlClient
    Data Provider)

    Step 1: Open SQL Server Configuration Manager
    Go to Windows 8 Start screen.
    Start typing in SQLServerManager11.msc if you are looking for SQL Server 2012 configuration manager. Type in SQLServerManager10.msc if you are looking for SQL Server 2008 configuration manager.
    In the result panel you can see the SQLServerConfiguration Manager.
    Click the icon to launch the SQL Server Configuration manager.
    The configuration manager will open in MMC.
    Step 2: Enable following configuration settings
    ensure Shared Memory protocol is enabled
    ensure Named Pipes protocol is enabled
    ensure TCP/IP is enabled, and s ahead of the Named Pipes in the settings
    http://dotnetguts.blogspot.com/2014/05/a-connection-was-successfully.html?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+DotnetGuts+%28Asp.net%2C+C%23%2C+.Net+Framework%2C+SQL+Server+Information%29
    Ahsan Kabir Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread. http://www.aktechforum.blogspot.com/

  • Server:An Error occurred in the container during the request processing

    Hi
    I am using tomcat 5.0 as for my serlvets. I get below exception when processing a request. Please let me know under what conditions do we get such exception
    2008-5-14 9:33:34 org.apache.coyote.tomcat5.CoyoteAdapter service
    Server:An exception or error occurred in the container during the request processing
    java.lang.NullPointerException
    at org.apache.tomcat.util.buf.MessageBytes.toChars(MessageBytes.java:245)
    at org.apache.tomcat.util.http.mapper.Mapper.map(Mapper.java:509)
    at org.apache.coyote.tomcat5.CoyoteAdapter.postParseRequest(CoyoteAdapter.java:279)
    at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:158)
    at org.apache.jk.server.JKCoyoteHandler.invoke(JKCoyoteHandler.java:300)
    at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:374)
    at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:743)
    at org.apache.jk.common.ChannelSocke.processConnection(ChannelSocket.java:675)
    at org.apache.jk.common.SocketConnection.runIt(ChannelSocket.java:866)
    at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
    at java.lang.Thread.run(Thread.java:619)
    Thanks
    fangbinyu

    This might help (then again, it might not!):
    Here is your stack trace:
    2008-5-14 9:33:34 org.apache.coyote.tomcat5.CoyoteAdapter service
    Server:An exception or error occurred in the container during the request processing
    java.lang.NullPointerException
    at org.apache.tomcat.util.buf.MessageBytes.toChars(MessageBytes.java:245)
    at org.apache.tomcat.util.http.mapper.Mapper.map(Mapper.java:509)
    at org.apache.coyote.tomcat5.CoyoteAdapter.postParseRequest(CoyoteAdapter.java:279)
    at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:158)
    at org.apache.jk.server.JKCoyoteHandler.invoke(JKCoyoteHandler.java:300)
    at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:374)
    at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:743)
    at org.apache.jk.common.ChannelSocke.processConnection(ChannelSocket.java:675)
    at org.apache.jk.common.SocketConnection.runIt(ChannelSocket.java:866)
    at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
    at java.lang.Thread.run(Thread.java:619)
    Do you see any class name in it that you created? If so, look into that class and either set breakpoints and step through it until an exception is thrown, or fill it with System.out.println() statements to see where it failed.
    If none of the items above is a class you created, I suspect its the vendor classes that failed due to them trying to configure themselves via various configuration files in the project (usually *.xml files). Check out your *.xml files for snytax error and/or incorrect configurations and/or missing configuration info. Null pointer exception means the vendor software went to call a function of a class that was not instansiated. Example: person.getName() will throw that type of error if person is null.
    If you still cant find the problem, you might try creating a simple project and add configuration info to it, get it to work, then add more configuration data, get it to work, etc until you duplicate your original project configuration setup. This way, you can isolate where the problem is.

Maybe you are looking for

  • Resizing a table in Adobe form J_3R_INV1_CONTEXT

    Hi, I'm quite new with Abobe forms and stuck with a task. It might seem simple, but though in this J_3R_INV1_CONTEXT form. There's a table (containing 13 columns) on the second page, and cc 1 cm is cut from it's right side, during printing. I can't m

  • Why can't I update to OSX 10.9.1? I restart my computer and the AppStore still says I need to restart to install.  I've tried many times with failure.

    I restart my computer and the AppStore still says I need to restart to install.  I've tried many times with failure.  I have restarted manually, through the appstore, and on the Apple Menu.

  • Will CSD shows Agent state as hold

    Hi All, Would like to know if Cisco supervisor desktop can shows agent state as hold? Issue is that even if the Agent placed the customer on hold, Supervisor desktop will show the Agent in talking state, which will give wrong perception to supervisor

  • Merging multiple idocs into 1 XML output

    Hi Gurus,   I've got a scenario whereby i will need to send payment documents via idocs to XI and XI will output them into an XML file. At the moment, when i perform a payment run for multiple vendors and send the idocs out, i realised that multiple

  • Date function activation

    Hi, the date function does not work, how can i change this situation for example , if i do this sql request SELECT cli_num from CLIENT, FACTURE where client.cli_num= facture.fac_cli and YEAR(fac_date)='2000'; I receive a message error saying "YEAR":n