Batch user cannot run program

I have setup program RSWUWFML2 to run every 15 minutes through SM36 (Background Job Processing). However, I cannot get our Batch user to run it. When I assign any other user with proper authorization to run the program, it works. But whenever I change the user to our Batch user, the program does not want to run.
This is not an authorization issue because our Batch user has all the authorizations the other users have that are able to run the program. Why would a Batch user not be able to run the program?
All help is appreciated!

Could it be that it's your own user that is not allowed to select batch user for the job. Use ST01 (trace authorization) to make sure.

Similar Messages

OWB - Workflow- Cannot run program "/usr/bin/perl": CreateProcess error=2,

Hi All,
I am using OWB 11gR2 and I am getting "perl" location error after start workflow for any dimension or fact.
*Cannot run program "/usr/bin/perl": CreateProcess error=2, The system cannot find the file specified
The log is below. I am using Windows 2008 R2 OS and 11gR2 DB. The perl path is set in the environment variables and I can run the perl.exe from command line.
Why OWB is looking for the Unix base path "/usr/bin/perl": is a question for me.
If anybody knows the issue please guide me.
Thanks
OUBIWF_D_DEVICE_ACTIVITY_TYPE                                        2012-07-04 16:57:37.0     4
Parameters
OUBIWF_D_DEVICE_ACTIVITY_TYPE:FILEMGR_PRE                              1          2012-07-04 16:57:38.0     2
Parameters
RPE-02229: The following debug information was collected:
RPE-02230: Debug Information: os.name = Windows Server 2008 R2
RPE-02230: Debug Information: os.version = 6.1
RPE-02230: Debug Information: os.arch = amd64
RPE-02230: Debug Information: user.name = INT-A-MDM-01$
RPE-02230: Debug Information: user.dir = C:\product\11.2.0\dbhome_3\owb\bin\win32
RPE-02230: Debug Information: argv.arg0 = /usr/bin/perl
RPE-02230: Debug Information: argv.arg1 = /spl/intbase/DB/tools/filemgr/splfilemgr.plx
RPE-02230: Debug Information: argv.arg2 = -l
RPE-02230: Debug Information: argv.arg3 = /spl/BIDevelopment/bi2400db
RPE-02230: Debug Information: argv.arg4 = -n
RPE-02230: Debug Information: argv.arg5 = D_DEVICE_ACTIVITY_TYPE_EXT.DAT
RPE-02230: Debug Information: argv.arg6 = -p
RPE-02230: Debug Information: argv.arg7 = 1
RPE-02230: Debug Information: argv.arg8 = -s
RPE-02230: Debug Information: argv.arg9 = S
RPE-02230: Debug Information: argv.stdin =
RPE-02230: Debug Information: USERPROFILE = C:\Windows\system32\config\systemprofile
RPE-02230: Debug Information: JAVAPATH = C:\product\11.2.0\dbhome_3\jdk6
RPE-02230: Debug Information: NODEID = 1
RPE-02230: Debug Information: IAS_HOME = C:\product\11.2.0\dbhome_3
RPE-02230: Debug Information: SystemDrive = C:
RPE-02230: Debug Information: RTHOME = C:\product\11.2.0\dbhome_3
RPE-02230: Debug Information: Path = C:\product\11.2.0\dbhome_3\bin;C:\product\11.2.0\dbhome_3\jdk6\jre\bin\client;C:\product\11.2.0\dbhome_3\jdk6\jre\bin;C:\product\11.2.0\dbhome_3\owb\bin\admin;C:\Windows\system32
RPE-02230: Debug Information: CONNECT_SPEC = 10.34.32.136:1521:MDM
RPE-02230: Debug Information: PROCESSOR_REVISION = 1a05
RPE-02230: Debug Information: OCM_ORACLE_HOME = C:\product\11.2.0\dbhome_3
RPE-02230: Debug Information: USERDOMAIN = WORKGROUP
RPE-02230: Debug Information: ALLUSERSPROFILE = C:\ProgramData
RPE-02230: Debug Information: TMP = C:\Windows\TEMP
RPE-02230: Debug Information: CommonProgramFiles = C:\Program Files\Common Files
RPE-02230: Debug Information: PROMPT = $P$G
RPE-02230: Debug Information: PROCESSOR_LEVEL = 6
RPE-02230: Debug Information: JVM_OPTIONS = -Xmx768M
RPE-02230: Debug Information: LOCALAPPDATA = C:\Windows\system32\config\systemprofile\AppData\Local
RPE-02230: Debug Information: COMPUTERNAME = INT-A-MDM-01
RPE-02230: Debug Information: SystemRoot = C:\Windows
RPE-02230: Debug Information: ORA_HOME = C:\product\11.2.0\dbhome_3
RPE-02230: Debug Information: USERNAME = INT-A-MDM-01$
RPE-02230: Debug Information: APPDATA = C:\Windows\system32\config\systemprofile\AppData\Roaming
RPE-02230: Debug Information: ProgramData = C:\ProgramData
RPE-02230: Debug Information: PATHEXT = .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
RPE-02230: Debug Information: ORACLE_HOME = C:\product\11.2.0\dbhome_3
RPE-02230: Debug Information: RTUSER = OWBSYS
RPE-02230: Debug Information: ProgramFiles(x86) = C:\Program Files (x86)
RPE-02230: Debug Information: TEMP = C:\Windows\TEMP
RPE-02230: Debug Information: OEM_HOME = C:\product\11.2.0\dbhome_3
RPE-02230: Debug Information: ProgramFiles = C:\Program Files
RPE-02230: Debug Information: JDK_HOME = C:\product\11.2.0\dbhome_3\jdk6
RPE-02230: Debug Information: OCM_HOME = C:\product\11.2.0\dbhome_3
RPE-02230: Debug Information: ProgramW6432 = C:\Program Files
RPE-02230: Debug Information: PROCESSOR_IDENTIFIER = Intel64 Family 6 Model 26 Stepping 5, GenuineIntel
RPE-02230: Debug Information: STARTUP_TYPE = -manual
RPE-02230: Debug Information: PROCESSOR_ARCHITECTURE = AMD64
RPE-02230: Debug Information: OS = Windows_NT
RPE-02230: Debug Information: FP_NO_HOST_CHECK = NO
RPE-02230: Debug Information: CommonProgramW6432 = C:\Program Files\Common Files
RPE-02230: Debug Information: ORACLE_SID = mdm
RPE-02230: Debug Information: DISCOVERER_ALLOW_DB_CONNECT_STRING = YES
RPE-02230: Debug Information: OWB_HOME = C:\product\11.2.0\dbhome_3
RPE-02230: Debug Information: NUMBER_OF_PROCESSORS = 2
RPE-02230: Debug Information: PUBLIC = C:\Users\Public
RPE-02230: Debug Information: PSModulePath = C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
RPE-02230: Debug Information: CommonProgramFiles(x86) = C:\Program Files (x86)\Common Files
RPE-02230: Debug Information: ComSpec = C:\Windows\system32\cmd.exe
RPE-02235: The operating system has reported that it cannot execute the requested command. This may be because the command or the parameters are invalid, or that the command is shell command. Any result code return is specific to the operating system. Debug information has been produced.
Cannot run program "/usr/bin/perl": CreateProcess error=2, The system cannot find the file specified
OUBIWF_D_DEVICE_ACTIVITY_TYPE:EMAIL_FILEMGR                              1          2012-07-04 16:57:40.0Parameters
ORA-24247: network access denied by access control list (ACL)
ORA-06512: at "SYS.UTL_TCP", line 17
ORA-06512: at "SYS.UTL_TCP", line 267
ORA-06512: at "SYS.UTL_SMTP", line 161
ORA-06512: at "SYS.UTL_SMTP", line 197
ORA-06512: at line 8

Hi There
Am experiencing the same issue. Did you manage to resolve it, is so can you advice what the resolution is. Thanks
Regards,
Kayode

Error: Cannot run program "C:\Oracle\Middleware\jdk160_21\jre\bin\javaw.exe

Hi
I have created a sample Fusion Web Application(ADF) and created a test.jsp in viewcontroller with few components. I have started the integrated weblogic server and started successfully, but when I run test.jsp it is giving me the below error
Error: Cannot run program "C:\Oracle\Middleware\jdk160_21\jre\bin\javaw.exe" (in directory "C:\Documents and Settings\chowdamr\Application Data\JDeveloper\system11.1.1.4.37.59.23\o.jdeveloper\DefaultWorkspace"): CreateProcess error=267, The directory name is invalid.
Initially this page is working successfuly.
Please tell me whats the problem.
Edited by: 858782 on May 13, 2011 5:28 AM

There are some problems when JDev's system directory (e.g. the \system11.1.1.4.37.59.23 directory) is in a path that contains spaces (as it is in your case - C:\Documents and Settings\...). Move the system directory to a path without spaces and try again. The simplest way to move it is to start JDeveloper in a "single user" mode (use <tt>jdeveloper.exe -singleuser</tt>) which will create the system directory within JDev's home directory. Of course, if your JDeveloper is installed in a path containing spaces, it will not work either (for example, if JDev is in C:\Program Files\...).
Have a look here for a more sophisticated approach for moving the system directory to another location:
http://technology.amis.nl/blog/8387/change-the-jdeveloper-system-directory
Dimitar

Cannot run program "keytool": java.io.IOException

Hi,
I would like to follow the procedure to change the master password
of glassfish server hosting APEX listener
using the change-master-password subcommand, but the utility keytool
is not found:
glassfish@ahost:/opt/glassfish3/glassfish/domains/mydom01/config> /opt/glassfish3/bin/asadmin
/opt/glassfish3/bin/asadmin
Use "exit" to exit and "help" for online help.
asadmin> change-master-password mydom01
Enter the current master password> changeit
Enter the new master password> changedit
Enter the new master password again> changedit
Cannot run program "keytool": java.io.IOException: error=2, No such file or directory
Command change-master-password failed.
asadmin>
Command multimode failed.
glassfish@ahost:/opt/glassfish3/glassfish/domains/mydom01/config> which java
/usr/bin/java
glassfish@ahost:/opt/glassfish3/glassfish/domains/mydom01/config>
All of glassfish is running fine apart from this.
keytool could be found in /usr/java/latest/bin/keytool.
Do we need to have this in the path? There is no requirement in the
install guide for this, nor did the RPM installation adjust the system
path accordingly.
Hopefully someone can tell my how things ought to be regarding keytool?
Thanks, Tom

Hi Tom,
the procedure to change the master password of glassfish server hosting APEX listener... sounds more like a GlassFish-related topic to me. I guess you'd get the best answers for such questions in a GlassFish-related forum...
For what it's worth, I'll try my best anyway:
Cannot run program "keytool": java.io.IOException: error=2, No such file or directoryThis seems to be a pretty clear error message: keytool , which is probably used to manage the keys for GlassFish users, wasn't found. This means, you're either running on an OS that is not officially certified for GlassFish, or you GlassFish hasn't been configured properly.
You ran
glassfish@ahost:/opt/glassfish3/glassfish/domains/mydom01/config> which java
/usr/bin/java... which indicates you assume your GlassFish is running without JAVA_HOME being set. If that's true, I'd begin to setup you GlassFish properly starting with that parameter.
Anyway, you also found out that
keytool could be found in /usr/java/latest/bin/keytool.... which is not +/usr/bin+ and hence probably not in the global search path of the user on whose behalf your GlassFish is running. So, you could either create a link-set[*] for +/usr/bin/keytool+ to (finally) point to +/usr/java/latest/bin/keytool+, or you setup JAVA_HOME to be +/usr/java/latest+ .
[*] Note that depending on your OS there might be more than one stage of indirection, e.g. my Ubuntu has +/usr/bin/java+ pointing to +/etc/alternatives/java+ which is pointing to +/usr/lib/jvm/java-6-sun/jre/bin/java+ where +/usr/lib/jvm/java-6-sun/+ is pointing to the directory containing the actual JDK to be used. You'll probably find something like that on your system as well. My Ubuntu box has a link for +/usr/bin/keytool+, so I get that when running "which keytool".
Do we need to have this in the path? There is no requirement in the install guide for this, nor did the RPM installation adjust the system path accordingly.Again, this is not a GlassFish forum.
I hope my hints help you solve your problem. If they don't, please choose the appropriate forum for your next post on that topic. And I guess, giving some more information on your OS and how you manage your JDK (and which version you use) will help people there to help you.
Thanks,
Udo

Java.io.IOException: Cannot run program "ant"

Hi all,
I'm running a Job in Hudson.
I build this job from a Hudson Master Server but the job is built in a Hudson Linux Node.
This is the result:
Started by user builder
Building remotely on Linux-Node
Updating http://150.200.20.200:8000/mvtv_all/DESCOS/MVTVc_D2ph1/branches revision: 17-may-2013 16:01:46 depth:infinity ignoreExternals: false
At revision 529
Updating http://150.200.200.200:8000/mvtv_all/DESCOS/KaluModules/branches revision: 17-may-2013 16:01:46 depth:infinity ignoreExternals: false
At revision 529
no change for http://159.200.300.20:8000/mvtv_all/DESCOS/MVTVc_D2ph1/branches since the previous build
no change for http://159.230.300.20:8000/mvtv_all/DESCOS/KaluModules/branches since the previous build
No emails were triggered.
[bt] $ ant -file build.xml -DSUBSYSTEM=ALL -DTARGET=makeBuild -DCRLIST= -DOWNER= -DbuildTool.patch.release=$RELEASE -DbuildTool.system=$SYSTEM -DbuildTool.patch.type=$PATCH_TYPE -DbuildTool.subsystem=ALL -DbuildTool.buildRules=pkgBuild -DbuildTool.dynamicView=$WORKSPACE/ALL -DbuildTool.compilationRules=compile -DbuildTool.patch.name=$PATCH_NAME makeBuild
FATAL: command execution failed.Maybe you need to configure the job to choose one of your Ant installations?
java.io.IOException: Cannot run program "ant" (in directory "/hudson/buildTool/src/bt"): error=2, No existe el fichero o el directorio
at java.lang.ProcessBuilder.start(ProcessBuilder.java:1029)
at hudson.Proc$LocalProc.<init>(Proc.java:192)
at hudson.Proc$LocalProc.<init>(Proc.java:164)
at hudson.Launcher$LocalLauncher.launch(Launcher.java:639)
at hudson.Launcher$ProcStarter.start(Launcher.java:274)
at hudson.Launcher$RemoteLaunchCallable.call(Launcher.java:794)
at hudson.Launcher$RemoteLaunchCallable.call(Launcher.java:768)
at hudson.remoting.UserRequest.perform(UserRequest.java:114)
at hudson.remoting.UserRequest.perform(UserRequest.java:48)
at hudson.remoting.Request$2.run(Request.java:283)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:471)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:334)
at java.util.concurrent.FutureTask.run(FutureTask.java:166)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
at java.lang.Thread.run(Thread.java:722)
Caused by: java.io.IOException: error=2, No existe el fichero o el directorio
at java.lang.UNIXProcess.forkAndExec(Native Method)
at java.lang.UNIXProcess.<init>(UNIXProcess.java:135)
at java.lang.ProcessImpl.start(ProcessImpl.java:130)
at java.lang.ProcessBuilder.start(ProcessBuilder.java:1021)
... 15 more
Do you know something about this issue?
Thanks and Regards

No, and this is not the Hudson forums either. But see this error?
FATAL: command execution failed.Maybe you need to configure the job to choose one of your Ant installations?Try posting that in Google and see what you get. That's basic misery solution research 101. Post the error in Google. 999/1000 times someone has already run into it before. Please learn from their experiences by reading through them.

Exception "Cannot run program" while using ProcessBuilder class

Hi Java-Folks,
I try to start a program within a Java application using the ProcessBuilder class. This is the first time I use ProcessBuilder so I do not have any deep knowledge of it. Here is a snippet of my code:
static void connectToHost(String Host) {
ProcessBuilder pb = new ProcessBuilder("connect.exe"), Host);
Map<String, String> env = pb.environment();
env.put("SHELLWIDTH", "64");
pb.directory(new File("C:\\MyProgram\\ExApp\\shell"));
try (
Process p = pb.start();
} catch (IOException ex) {
Logger.getLogger(ShellUtil.class.getName()).log(Level.SEVERE, null, ex);
}Using this method I get an IOException which says *"Cannot run program "connect.exe" (in directory "C:\MyProgram\ExApp\shell"): CreateProcess error=2, The system couldn't find the specified file"*
Does anybody have an idea why this is not working? I tried to start another application like "notepad.exe" and that works fine. So it seems related to the fact
that the program I want to start is only available in a certain directory and not via the PATH env-variable.
I would appreciate any help or hint :-)
Regards,
Lemmy

Okay I guess I misinterpreted the JavaDocs regarding the directory method. The exception message is a little bit confusing too, because it seems like Java tries to find the Application within the specified
working directory.
I tried to use the full path with the ProcessBuilder constructor and it looks like this variant is working. I still have some trouble with the application itself but I was able to start another program which is
not in the PATH var, using the full path to the executable.
Thanks for the help so far.
Bye
Lemmy

ProcessBuilder: Cannot run program

Hello,
In my code I need to run a windows application. Through the Command Prompt I would type:
C:\>"C:\Documents and Settings\Simpatico\My Documents\Woerter Speichern Files\changeBackgroud" "C:\\Documents and Settings\\Simpatico\\My Documents\\Woerter Speichern Files\\testimage.bmp"In Java I wrote:
ProcessBuilder pb = new ProcessBuilder("C:\\Documents and Settings\\Simpatico\\My Documents\\Woerter Speichern Files\\changeBackground", C:\\Documents and Settings\\Simpatico\\My Documents\\Woerter Speichern Files\\testimage.bmp);
          pb.directory(new File("C:\\Documents and Settings\\Simpatico\\My Documents\\Woerter Speichern Files"));
          try {
               pb.start();
          } catch (IOException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();And I get:
java.io.IOException: Cannot run program "C:\Documents and Settings\Simpatico\My Documents\Woerter Speichern Files\changeBackground": CreateProcess error=2, The system cannot find the file specified
     at java.lang.ProcessBuilder.start(Unknown Source)The problem is with executing the application, changeBackground in the first place, and not the parameter passing.

simpatico_gabriele wrote:
1. They are not. Please qualify ur claim.All right, I will. Your code is like this:
ProcessBuilder pb = new ProcessBuilder("C:\\Documents and Setting...{code}
The string you pass as a parameter there starts with the letter C, not with a quote. You still don't believe it? Try this:
{code}System.out.println("C:\\Documents and Setting");{code}
Notice how what's printed out doesn't start with a quote?
It's really annoying how you ask for help and then flatly reject it when it's given. This is the last help I will be giving you.

CAN COMPILE BUT CANNOT RUN PROGRAM

I am finally able to compile my program, I have the extensions .class, when I try to run the program I get an error message "main"java.lang.noclassdef
after message appears after I type java Saluton or whatever program I am trying to run.
Any suggestions, someone justed I use textpad, but I don't think this has anything to do with not being able to run programs, I am using windows 98 second edition.

This is a CLASSPATH problem.
For example, if your .class file is in the directory C:\javaclasses then you would set the CLASSPATH environment variable to that using:
set CLASSPATH=C:\javaclasses
Add this to your autoexec.bat and reboot so you don't have to type this every time you open a DOS prompt.
You may want to add the current directory, ., to the list of directories (use ; to separate directories).
set CLASSPATH=.;C:\javaclasses
If your class is part of a package, you have to use the directory that is the parent of the packages' directories.

OSX 10.4.2 tried to update itunes now cannot run program

I know it's an old computer (iBook, 2003)--but it has to hang in there for a few more months! Tried to update the iTunes, for the sole purpose of using the ipod, and it let me--but now a message states it can't run the program at all. Tried CDs--opens Quicktime. Cannot update QT b/c computer's too old and slow. I would love to update it to something before 7.3...ideas?
Mac Mac OS X (10.4.2)

It's an upgrade as it is! Recently the hard-drive crashed and I upgraded to the current OSX 10.4.2. I don't have enough memory to go any higher. I'm looking for a new Mac--but my paychecks can't handle that yet.
Mac Mac OS X (10.4.2) iBook

New user - cannot get programs to work??

I just signed up for the full version of creative cloud and paid the $49.95. When I try to open the applications, that were previously installed as the trial versions, they still wont open? How do I get the programs to work?
Annoying. It is still asking me for a licence number? Am I meant to have one? Do I need to reinstall all programs???!!
Some better instructions would be great Adobe....!
The email you sent is not very helpful... Surely I am not the only person who downloaded the trial versions before subscribing... Your email is worded that I need to download the programs to make them work...
How to get started:
1. Log in http://www.adobe.com/go/cc_appsservices_au?trackingid=KDUMO to Creative Cloud with your Adobe ID and password.
2. Choose products to download on the Apps page.http://www.adobe.com/go/cc_appsservices_au?trackingid=KDUMO
3. Need Help? Visit the Download and Installation Support Center.http://www.adobe.com/go/cc_downloadhelp_au?trackingid=KDUMM

Hi GennoAustralia,
To license your already installed products running in trial, please follow below instructions:
1. Remove all adobe entries present in host file. Host file is located at: C:\Windows\System32\\drivers\etc\hosts(win) and /private/etc/hosts(mac)
2. Launch any of your product,you want to license.Follow step a) or b) whichever applicable:
a) If you have bought subscription for same adobe id which you used while installing your product in trial, you will get a "Sign In" screen. Click on "SIgn In", your product is now licensed.
b) If your adobe id having subscription is different from adobe id used while installing product in trial, a trial screen which has two butttons : "License This Software" and "Continue Trial" is shown. Click on "License This Software". On next screen, click on "Not your Adobe Id" and enter the adobe id carrying subscription.
You will now be able to license your product.
Thanks,
Manjri

Restricted user cannot run applescript application

I have written an applescript application (locked) for students using iMacs on our win2000 network to dismount pc shares. The applications accessed by the students are restricted via parental controls. When I search and select the application (logout) within the parental controls I get the message 'logout can not be run with the limitations set'. Whilst logout can be run by admin it will not run for the student. Has anyone got any ideas?

Hi Richard,
Thank you for using the National Instruments forums!
Is this error only with this one specific VI or with all VI's?? What does this VI do in terms of function?
Have you tried this same VI as a copy of this file, to make sure there is no corruptions with the VI?
Error related to lvinit.cpp are generally due to administrator rights / user rights issues.. Was LabVIEW installed with admin priveleges, and that users are allowed to read/write on the file used by LabVIEW? It has been seen before that the issue can be solved with giving the users the suitable read/write permissions to LabVIEW.
Kind regards,
Ashish Naik
Field Sales Engineer
National Instruments UK

Another user cannot run QT movies I send her

She is running a Powerbook G4, Tiger, current QT player, etc. When I send a CD ROM quality movie she tells me she gets an "error 5000" so she says. What am I doing wrong when exporting from iMovieHD to this format that prevents her from seeing the movie?

How are you "delivering" the file? Over a network?
Error 5000 usually means a "permissions" issue.
Did you burn the file to CD? Did you use the Finder or other software to burn?

Cannot write the suitable source codes for running program

I want to write a program that help student to compile program and run program by using some test cases. For the compiled part, i have been wrote it successfully, but for the run part, i cannot pass the test cases to the program for running. Could any ppl help me to find the problem on the followng codes, why the error will on there? how do i change it? Thanks!
//
java.io.BufferedReader TestCaseBuf = null;
Connection con = null;
Statement stmt = null;
ResultSet rs = null;
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
con = DriverManager.getConnection("jdbc:odbc:compas", "sa", "password");
stmt = con.createStatement();
String strSQL = "SELECT testValue FROM TEST_CASE WHERE progID='"+progID+"'";
stmt = con.createStatement();
rs = stmt.executeQuery(strSQL);
try
while (rs.next())
TestCaseBuf = new java.io.BufferedReader(new java.io.InputStreamReader(rs.getBinaryStream("testValue")));
finally
if (rs != null)
     rs.close();
if (stmt != null)
     stmt.close();
//
//
String[ ] args2 = new String[ ]
     "java", "-cp", System.getProperty("user.dir"), FileName
try
     Runtime rt = Runtime.getRuntime();
     Process proc = rt.exec(args2);
     java.io.BufferedReader ireader = new java.io.BufferedReader(new java.io.InputStreamReader(proc.getInputStream()));
     java.io.PrintWriter pwriter = new java.io.PrintWriter(proc.getOutputStream());
String atestcase = null;
     String line= null;
     try
while ((atestcase = TestCaseBuf.readLine()) != null) <------------I found that error seems on here!!!!
     pwriter.write(atestcase+"\r");
pwriter.flush();
if (atestcase != null)
          if ((line = ireader.readLine()) != null)
          FileOutput = FileOutput + line +"\r\n";
else {break; }
     } //while
     catch (java.io.IOException e)
     out.println("[IOException]. Printing Stack Trace");
     e.printStackTrace();
     pwriter.close();
     ireader.close();
catch (java.io.IOException e)
out.println("[IOException]. Printing Stack Trace");
e.printStackTrace();
//

Whats the error message??
Just a guess, but could be (without seeing the error) that you've already closed the TestCaseBuf reader by closing the result set, hence when you go to read it, you're reading on closed reader.
Give this a go...Put the // code into the result set while loop
while (rs.next())
TestCaseBuf = new java.io.BufferedReader(new java.io.InputStreamReader(rs.getBinaryStream("testValue")));
//
...some code
//
} Hard to tell without the error message

[SOLVED] configure: error: cannot run C compiled programs

I'm trying to build lib32-libxkbcommon 0.5.0-1 from AUR with makepkg. I already tried installing pacman (setting the default makepkg.conf) and multilib-devel with no luck.
makepkg messages:
==> Making package: lib32-libxkbcommon 0.5.0-1 (Mon May 11 00:17:05 EEST 2015)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving sources...
-> Found libxkbcommon-0.5.0.tar.xz
==> Validating source files with sha256sums...
libxkbcommon-0.5.0.tar.xz ... Passed
==> Extracting sources...
-> Extracting libxkbcommon-0.5.0.tar.xz with bsdtar
bsdtar: Failed to set default locale
==> Starting prepare()...
==> Removing existing $pkgdir/ directory...
==> Starting build()...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether to enable maintainer-specific portions of Makefiles... yes
checking for style of include used by make... GNU
checking for gcc... gcc -m32
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... configure: error: in `/mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0':
configure: error: cannot run C compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details
==> ERROR: A failure occurred in build().
Aborting...
makepkg.conf:
# /etc/makepkg.conf
# SOURCE ACQUISITION
#-- The download utilities that makepkg should use to acquire sources
# Format: 'protocol::agent'
DLAGENTS=('ftp::/usr/bin/curl -fC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
'http::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'https::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'rsync::/usr/bin/rsync --no-motd -z %u %o'
'scp::/usr/bin/scp -C %u %o')
# Other common tools:
# /usr/bin/snarf
# /usr/bin/lftpget -c
# /usr/bin/wget
#-- The package required by makepkg to download VCS sources
# Format: 'protocol::package'
VCSCLIENTS=('bzr::bzr'
'git::git'
'hg::mercurial'
'svn::subversion')
# ARCHITECTURE, COMPILE FLAGS
CARCH="x86_64"
CHOST="x86_64-unknown-linux-gnu"
#-- Compiler and Linker Flags
# -march (or -mcpu) builds exclusively for an architecture
# -mtune optimizes for an architecture, but builds for whole processor family
CPPFLAGS="-D_FORTIFY_SOURCE=2"
CFLAGS="-march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4"
CXXFLAGS="${CFLAGS}"
LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro"
#-- Make Flags: change this for DistCC/SMP systems
MAKEFLAGS="-j5"
#-- Debugging flags
DEBUG_CFLAGS="-g -fvar-tracking-assignments"
DEBUG_CXXFLAGS="-g -fvar-tracking-assignments"
# BUILD ENVIRONMENT
# Defaults: BUILDENV=(!distcc color !ccache check !sign)
# A negated environment option will do the opposite of the comments below.
#-- distcc: Use the Distributed C/C++/ObjC compiler
#-- color: Colorize output messages
#-- ccache: Use ccache to cache compilation
#-- check: Run the check() function if present in the PKGBUILD
#-- sign: Generate PGP signature file
BUILDENV=(!distcc color !ccache check !sign)
#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
#-- specify a space-delimited list of hosts running in the DistCC cluster.
#DISTCC_HOSTS=""
#-- Specify a directory for package building.
#BUILDDIR=/tmp/makepkg
# GLOBAL PACKAGE OPTIONS
# These are default values for the options=() settings
# Default: OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !upx !debug)
# A negated option will do the opposite of the comments below.
#-- strip: Strip symbols from binaries/libraries
#-- docs: Save doc directories specified by DOC_DIRS
#-- libtool: Leave libtool (.la) files in packages
#-- staticlibs: Leave static library (.a) files in packages
#-- emptydirs: Leave empty directories in packages
#-- zipman: Compress manual (man and info) pages in MAN_DIRS with gzip
#-- purge: Remove files specified by PURGE_TARGETS
#-- upx: Compress binary executable files using UPX
#-- debug: Add debugging flags as specified in DEBUG_* variables
OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !upx !debug)
#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
INTEGRITY_CHECK=(md5)
#-- Options to be used when stripping binaries. See `man strip' for details.
STRIP_BINARIES="--strip-all"
#-- Options to be used when stripping shared libraries. See `man strip' for details.
STRIP_SHARED="--strip-unneeded"
#-- Options to be used when stripping static libraries. See `man strip' for details.
STRIP_STATIC="--strip-debug"
#-- Manual (man and info) directories to compress (if zipman is specified)
MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
#-- Doc directories to remove (if !docs is specified)
DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
#-- Files to be removed from all packages (if purge is specified)
PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
# PACKAGE OUTPUT
# Default: put built package and cached source in build directory
#-- Destination: specify a fixed directory where all packages will be placed
#PKGDEST=/home/packages
#-- Source cache: specify a fixed directory where source files will be cached
#SRCDEST=/home/sources
#-- Source packages: specify a fixed directory where all src packages will be placed
#SRCPKGDEST=/home/srcpackages
#-- Log files: specify a fixed directory where all log files will be placed
#LOGDEST=/home/makepkglogs
#-- Packager: name/email of the person or organization building packages
#PACKAGER="John Doe <[email protected]>"
#-- Specify a key to use for package signing
#GPGKEY=""
# COMPRESSION DEFAULTS
COMPRESSGZ=(gzip -c -f -n)
COMPRESSBZ2=(bzip2 -c -f)
COMPRESSXZ=(xz -c -z -)
COMPRESSLRZ=(lrzip -q)
COMPRESSLZO=(lzop -q)
COMPRESSZ=(compress -c -f)
# EXTENSION DEFAULTS
# WARNING: Do NOT modify these variables unless you know what you are
# doing.
PKGEXT='.pkg.tar.xz'
SRCEXT='.src.tar.gz'
# vim: set ft=sh ts=2 sw=2 et:
config.log:
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by libxkbcommon configure 0.5.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure --prefix=/usr --libdir=/usr/lib32 --disable-docs --disable-static
## Platform. ##
hostname = Arch
uname -m = x86_64
uname -r = 4.0.1-1-ARCH
uname -s = Linux
uname -v = #1 SMP PREEMPT Wed Apr 29 12:00:26 CEST 2015
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = unknown
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/bin
PATH: /usr/lib/jvm/default/bin
PATH: /usr/bin/site_perl
PATH: /usr/bin/vendor_perl
PATH: /usr/bin/core_perl
## Core tests. ##
configure:2424: checking for a BSD-compatible install
configure:2492: result: /usr/bin/install -c
configure:2503: checking whether build environment is sane
configure:2558: result: yes
configure:2709: checking for a thread-safe mkdir -p
configure:2748: result: /usr/bin/mkdir -p
configure:2755: checking for gawk
configure:2771: found /usr/bin/gawk
configure:2782: result: gawk
configure:2793: checking whether make sets $(MAKE)
configure:2815: result: yes
configure:2844: checking whether make supports nested variables
configure:2861: result: yes
configure:2987: checking whether to enable maintainer-specific portions of Makefiles
configure:2996: result: yes
configure:3023: checking for style of include used by make
configure:3051: result: GNU
configure:3122: checking for gcc
configure:3149: result: gcc -m32
configure:3378: checking for C compiler version
configure:3387: gcc -m32 --version >&5
gcc (GCC) 5.1.0
Copyright (C) 2015 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:3398: $? = 0
configure:3387: gcc -m32 -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-unknown-linux-gnu/5.1.0/lto-wrapper
Target: x86_64-unknown-linux-gnu
Configured with: /build/gcc-multilib/src/gcc-5-20150505/configure --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://bugs.archlinux.org/ --enable-languages=c,c++,ada,fortran,go,lto,objc,obj-c++ --enable-shared --enable-threads=posix --enable-libmpx --with-system-zlib --with-isl --enable-__cxa_atexit --disable-libunwind-exceptions --enable-clocale=gnu --disable-libstdcxx-pch --disable-libssp --enable-gnu-unique-object --enable-linker-build-id --enable-lto --enable-plugin --enable-install-libiberty --with-linker-hash-style=gnu --enable-gnu-indirect-function --enable-multilib --disable-werror --enable-checking=release --with-default-libstdcxx-abi=c++98
Thread model: posix
gcc version 5.1.0 (GCC)
configure:3398: $? = 0
configure:3387: gcc -m32 -V >&5
gcc: error: unrecognized command line option '-V'
gcc: fatal error: no input files
compilation terminated.
configure:3398: $? = 1
configure:3387: gcc -m32 -qversion >&5
gcc: error: unrecognized command line option '-qversion'
gcc: fatal error: no input files
compilation terminated.
configure:3398: $? = 1
configure:3418: checking whether the C compiler works
configure:3440: gcc -m32 -march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1,--sort-common,--as-needed,-z,relro conftest.c >&5
configure:3444: $? = 0
configure:3492: result: yes
configure:3495: checking for C compiler default output file name
configure:3497: result: a.out
configure:3503: checking for suffix of executables
configure:3510: gcc -m32 -o conftest -march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1,--sort-common,--as-needed,-z,relro conftest.c >&5
configure:3514: $? = 0
configure:3536: result:
configure:3558: checking whether we are cross compiling
configure:3566: gcc -m32 -o conftest -march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1,--sort-common,--as-needed,-z,relro conftest.c >&5
In file included from /usr/include/stdio.h:27:0,
from conftest.c:11:
/usr/include/features.h:365:25: fatal error: sys/cdefs.h: No such file or directory
compilation terminated.
configure:3570: $? = 1
configure:3577: ./conftest
./configure: line 3579: ./conftest: No such file or directory
configure:3581: $? = 127
configure:3588: error: in `/mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0':
configure:3590: error: cannot run C compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details
## Cache variables. ##
ac_cv_env_CC_set=set
ac_cv_env_CC_value='gcc -m32'
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value='-march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4'
ac_cv_env_CPPFLAGS_set=set
ac_cv_env_CPPFLAGS_value=-D_FORTIFY_SOURCE=2
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_DOT_set=
ac_cv_env_DOT_value=
ac_cv_env_DOXYGEN_set=
ac_cv_env_DOXYGEN_value=
ac_cv_env_LDFLAGS_set=set
ac_cv_env_LDFLAGS_value=-Wl,-O1,--sort-common,--as-needed,-z,relro
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_PKG_CONFIG_LIBDIR_set=
ac_cv_env_PKG_CONFIG_LIBDIR_value=
ac_cv_env_PKG_CONFIG_PATH_set=set
ac_cv_env_PKG_CONFIG_PATH_value=/usr/lib32/pkgconfig
ac_cv_env_PKG_CONFIG_set=
ac_cv_env_PKG_CONFIG_value=
ac_cv_env_XCB_XKB_CFLAGS_set=
ac_cv_env_XCB_XKB_CFLAGS_value=
ac_cv_env_XCB_XKB_LIBS_set=
ac_cv_env_XCB_XKB_LIBS_value=
ac_cv_env_XORG_MALLOC_DEBUG_ENV_set=
ac_cv_env_XORG_MALLOC_DEBUG_ENV_value=
ac_cv_env_YACC_set=
ac_cv_env_YACC_value=
ac_cv_env_YFLAGS_set=
ac_cv_env_YFLAGS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_path_install='/usr/bin/install -c'
ac_cv_path_mkdir=/usr/bin/mkdir
ac_cv_prog_AWK=gawk
ac_cv_prog_ac_ct_CC='gcc -m32'
ac_cv_prog_make_make_set=yes
am_cv_make_support_nested_variables=yes
## Output variables. ##
ACLOCAL='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing aclocal-1.14'
ADMIN_MAN_DIR=''
ADMIN_MAN_SUFFIX=''
AMDEPBACKSLASH='\'
AMDEP_FALSE='#'
AMDEP_TRUE=''
AMTAR='$${TAR-tar}'
AM_BACKSLASH='\'
AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
AM_DEFAULT_VERBOSITY='1'
AM_V='$(V)'
APP_MAN_DIR=''
APP_MAN_SUFFIX=''
AR=''
AUTOCONF='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing autoconf'
AUTOHEADER='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing autoheader'
AUTOMAKE='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing automake-1.14'
AWK='gawk'
BASE_CFLAGS=''
BUILD_LINUX_TESTS_FALSE=''
BUILD_LINUX_TESTS_TRUE=''
CC='gcc -m32'
CCDEPMODE=''
CFLAGS='-march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4'
CHANGELOG_CMD=''
CPP=''
CPPFLAGS='-D_FORTIFY_SOURCE=2'
CWARNFLAGS=''
CYGPATH_W='echo'
DEFS=''
DEPDIR='.deps'
DLLTOOL=''
DOT=''
DOXYGEN=''
DRIVER_MAN_DIR=''
DRIVER_MAN_SUFFIX=''
DSYMUTIL=''
DUMPBIN=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
ENABLE_DOCS_FALSE=''
ENABLE_DOCS_TRUE=''
ENABLE_X11_FALSE=''
ENABLE_X11_TRUE=''
EXEEXT=''
FGREP=''
FILE_MAN_DIR=''
FILE_MAN_SUFFIX=''
GREP=''
HAVE_DOT=''
HAVE_DOT_FALSE=''
HAVE_DOT_TRUE=''
HAVE_DOXYGEN_FALSE=''
HAVE_DOXYGEN_TRUE=''
HAVE_NO_UNDEFINED_FALSE=''
HAVE_NO_UNDEFINED_TRUE=''
INSTALL_CMD=''
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
LD=''
LDFLAGS='-Wl,-O1,--sort-common,--as-needed,-z,relro'
LIBOBJS=''
LIBS=''
LIBTOOL=''
LIB_MAN_DIR=''
LIB_MAN_SUFFIX=''
LIPO=''
LN_S=''
LTLIBOBJS=''
MAINT=''
MAINTAINER_MODE_FALSE='#'
MAINTAINER_MODE_TRUE=''
MAKEINFO='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing makeinfo'
MANIFEST_TOOL=''
MAN_SUBSTS=''
MISC_MAN_DIR=''
MISC_MAN_SUFFIX=''
MKDIR_P='/usr/bin/mkdir -p'
NM=''
NMEDIT=''
OBJDUMP=''
OBJEXT=''
OTOOL64=''
OTOOL=''
PACKAGE='libxkbcommon'
PACKAGE_BUGREPORT='https://bugs.freedesktop.org/enter_bug.cgi?product=libxkbcommon'
PACKAGE_NAME='libxkbcommon'
PACKAGE_STRING='libxkbcommon 0.5.0'
PACKAGE_TARNAME='libxkbcommon'
PACKAGE_URL='http://xkbcommon.org'
PACKAGE_VERSION='0.5.0'
PATH_SEPARATOR=':'
PKG_CONFIG=''
PKG_CONFIG_LIBDIR=''
PKG_CONFIG_PATH='/usr/lib32/pkgconfig'
RANLIB=''
RT_LIBS=''
SED=''
SET_MAKE=''
SHELL='/bin/sh'
STRICT_CFLAGS=''
STRIP=''
VERSION='0.5.0'
XCB_XKB_CFLAGS=''
XCB_XKB_LIBS=''
XKBCONFIGROOT=''
XLOCALEDIR=''
XORG_MALLOC_DEBUG_ENV=''
XORG_MAN_PAGE=''
YACC=''
YACC_INST=''
YFLAGS=''
ac_ct_AR=''
ac_ct_CC='gcc -m32'
ac_ct_DUMPBIN=''
am__EXEEXT_FALSE=''
am__EXEEXT_TRUE=''
am__fastdepCC_FALSE=''
am__fastdepCC_TRUE=''
am__include='include'
am__isrc=''
am__leading_dot='.'
am__nodep='_no'
am__quote=''
am__tar='$${TAR-tar} chof - "$$tardir"'
am__untar='$${TAR-tar} xf -'
bindir='${exec_prefix}/bin'
build=''
build_alias=''
build_cpu=''
build_os=''
build_vendor=''
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='NONE'
host=''
host_alias=''
host_cpu=''
host_os=''
host_vendor=''
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/install-sh'
libdir='/usr/lib32'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
mkdir_p='$(MKDIR_P)'
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='/usr'
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target_alias=''
## confdefs.h. ##
/* confdefs.h */
#define PACKAGE_NAME "libxkbcommon"
#define PACKAGE_TARNAME "libxkbcommon"
#define PACKAGE_VERSION "0.5.0"
#define PACKAGE_STRING "libxkbcommon 0.5.0"
#define PACKAGE_BUGREPORT "[url]https://bugs.freedesktop.org/enter_bug.cgi?product=libxkbcommon[/url]"
#define PACKAGE_URL "[url]http://xkbcommon.org[/url]"
#define PACKAGE "libxkbcommon"
#define VERSION "0.5.0"
configure: exit 1
other info:
core/pacman 4.2.1-1
multilib/gcc-multilib 4.9.2-4 (multilib-devel) [installed]
The GNU Compiler Collection - C and C++ frontends for multilib
multilib/lib32-fakeroot 1.20.2-1 (multilib-devel) [installed]
Tool for simulating superuser privileges (32-bit)
multilib/lib32-libltdl 2.4.5-1 (multilib-devel) [installed]
A generic library support script (32-bit)
Last edited by tsester (2015-05-10 22:10:28)

tsester wrote:P.S.: I recently transfered the linux system between failing disks
In that case you should probably check that no other packages are missing files with
pacman -Qkk 2>&1 | grep "No such file or directory"
Any packages that report that they're missing files, you should reinstall.

[SOLVED] Cannot run kdenlive as user

Does anyone else have the problem of running kdenlive as a regular user? I can run it as root, but not as a user. I have the same problem as this thread:
https://bbs.archlinux.org/viewtopic.php?id=110402
Any clues? (FWIW, I tried the svn version of kdenlive from AUR with the same issue.)
Last edited by mrunion (2011-02-19 01:18:02)

I found the problem. If I use the Oxygen-Transparent theme, kdenlive cannot run. If I use the regular Oxygen theme, all is well. Go figure!

Batch user cannot run program

Similar Messages

Maybe you are looking for