Batch where used List

Hello,
I had an issue. My batch Where used list does not show any usage details in BMBC. Are any special configurations required to activate the batch the Batch Where used list?
Any help would be greatly appreciated.
Sincerely,
Aji

Dear First check transaction MB56 also if it too doesn't work then check OMBB settings or Enterprise Structure--> Logistics
General--> Batch Management --> Make Settings for Batch Where-used list Transaction.
Check and Revert.
Cheers
KK

Similar Messages

FM for Batch where used list

Hi ,
I want to link the Finished goods to Raw Material and vise versa. I want all the levels from the Raw Material to Finished goods . Do u have any FM where we can give the Material number and batch and get the where used list corresponding to MB56?
Kindly help.
Thanks in Advance.
Paramita

Hi,
Use FM 'CHVW_EXPLODE_ALL' to get the Batch where used list
Regards
Venu

Traceability with batch class characteristics in batch where used list.

Hi,
I have a process order which issues 5 pallets or material and produces 5 pallets of another material. Each pallet is a seperate batch in my scenario.
All materials are assigned to a batch class and i will be using a class characteristic to enter the issued pallet number (includes material number and batch number) to the produced pallet batch. This way i want to create a traceability system.
the problem is i need a way to create a hierarchical view or integrate this scenario to batch where used list.
there is a badi for where used list to read external data. but i guess that is for something called "external batches"
can you please guide me for the best practice of doing this?
Thanks,
Alper,

Hi!,
I think you have to use the mix of two functionalities:
1. Original batch function
2. Batch derivation
This way you can pull the characteristics of the source material batch in to raw material as well as finish material batches.
In this you have to create a nonvaluated material which is used as original batch mateial. You have to assign this material in material master of the RM and FG alongwith other required entries. Also you have to use batch derivation function to pull the charactristics of this original material batch in to the RM and FG.
Please go through the SAP help regarding Original batch and Batch derivation function to have more clarity.
Please revert back in case of any further issue.
Regards,
Uday

Cross system batch where used list

Hi,
We have a 6.0 and a 4.7 system and we want to run a batch where used list starting from 6.0 and going to 4.7 and vice versa. Has anyone done this before and what is the best possible way to do it. Can I use a BAPI to call the MB56 tcodes across systems? Or is there some other method ?
Thanks

bump

Function Module "where used list"

I'm looking for a function module which does the same as the where used list: i want to have all tables conataining a special field e.g. mandt. Is there such a FM available?

Hi,
Use FM 'CHVW_EXPLODE_ALL' to get the Batch where used list.
HTH
Regards,
Dhruv Shah

Batch where-used

What is the transaction to see the batch where-used list?

Hi,
First Check in OMBB, whether BaWU and BaWU Synchronization is activate?
Then run MB57 - Compile Batch where-used file
Purpose to run this transaction is;
If provision has been made for synchronous posting of batch usage data in Customizing for Inventory Management, you only need to run this program when implementing the batch where-used list. In the case of synchronous posting, the system automatically creates new records for each goods movement.
The program stores the batch usage data for the selected material documents in the file CHVW. it only takes into account the material document items for which the plant allows the compilation of a file (batch where-used list not deactivated).
It issues a log of the new batch where-used records and a log of the existing records.
And then MB56 - Display Batch Where-Used List

Function Module or Program to get where used list

Hi,
I´ve been searching for Function Module or program to get where used list for an object.
I try using the FM 'RS_TOOL_ACCESS' with parameters operation = 'CROSSREF', objectname = 'ZMYPROG', object_type = 'PROG'
and in effect i get the list of object where the program is used, but the list is showed in standard screen.
is there a function or program to obtain the used list for an object but in an internal table?
I'm using version 4.6B.
I checked the function module RS_INFOSYSTEM_CREATE_REQUEST, but i didn't obtain any result, is there a funcion or combination or FM to get the used list?
thanks,
Alejandro
Message was edited by: Alejandro López

Hi Alejandro,
Please check this sample program.
DATA: OBJTYPE TYPE EUOBJ-ID.
DATA: OBJECTS TYPE RINFOOBJ.
APPEND P_OBJECT_NAME TO OBJECTS.
OBJTYPE = P_OBJECT_TYPE.
CALL FUNCTION 'RS_INFOSYSTEM_CREATE_REQUEST'
EXPORTING
    OBJTYPE            = OBJTYPE
    ACTION             = SWBM_C_OP_WHERE_USED_LIST
IMPORTING
    INFOSYSTEM_REQUEST = P_WB_REQUEST
TABLES
    OBJLIST            = OBJECTS
    DEVCLASS           = p_scope_devclass
    OBJKEY             = p_scope_objkey
    I_SCOPE_OBJECT_CLS = P_SCOPE_OBJECT_TYPES
    I_SCOPE_OBJECTS    = P_SCOPE_OBJECTS
    EDITOR_SOURCE      = P_EDITOR_SOURCE
EXCEPTIONS
    NOT_EXECUTED       = 1
    BATCH              = 2
    OTHERS             = 3.
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful.

How to find out where used list of Table or T-code

Dear ABAP gurus
I know many of you have done this several times.
wish to find out which Transaction code INSERTs the data into the table IHPA.
I did the where used list - SE11 ( for specific key work called INSERT ).
Used the Table called D010TAB which has some information.
Vise versa if I know a T-CODE , how to know which tables it read & Modify...
any better procedure than spending hours in research...
I found similar custom program to find USER EXITS ...here..., looking soething similar...
[http://wiki.sdn.sap.com/wiki/display/Snippets/FindUser-exits%2CBADIs%2CBTEs%2CEtcbyTCodeorProgram]
thank you for your help
Edited by: Raj Anvesh on Aug 3, 2011 9:58 PM

Hi Anvesh,
Maybe the data INSERTION is happening by BAPI,
So just try to look for the concerned BAPIS.
ECP_SRV_PARTNERS_IHPA
IREP1_IHPA_ADRNR_PRE_FETCH
IREP1_IHPA_ADRNR_READ
MAP2E_DIIHPA_TO_PARTNER
MAP2E_IHPAVB_BAPI2080_NOTPARTE
MAP2E_IHPAVB_TO_BAPI_IHPA
MAP2E_IHPA_BAPI2080_NOTPARTNRI
MAP2E_IHPA_M_BAPI2080_NOTPNRI
MAP2I_BAPI2080_NOTPARTNRI_IHPA
MAP2I_BAPI_IHPA_TO_IHPA
PM_DB_FILL_DIIHPA
PM_PARTNERCOPY_FILL_XIHPA
PM_PARTNER_DELETE_XIHPA
PM_PARTNER_GET_XIHPA
PM_PARTNER_PUT_XIHPA
PM_PARTNER_REFRESH_XIHPA
these are the bapis which are dealing with the IHPA table,
Segregate them as needed and then go to the std program
Revert for further clarification.
Thanks
Sri

Where used list of a function module

hello ,
i want to find out where used list of a function modules , but the problem when I try where used button with in a function module Im getting message saying 'Function Is Not An Include' when it is used in other programs. Function AKB_WHERE_USED_LIST does not exist.Function FUNC_GET_OBJECT does not show the names of the programs.Im Stuck..Plz advise.
Thanks in Advance

Hello,
This is working fine.
i am getting the name of the programs where the Fm is used.
In
OBJ_TYPE FUNC
OBJ_NAME FUNC_GET_OBJECT
Try this.........

Short dump with Where-used list

Hi All,
I'm making some research on specific InfoObjects, and in some cases I want to know where are they being used, but when I try to use the icon for "Where-used list using Data Warehouse" I end up with an error, a short dump.
Message class is: RSQBW
Trigger Location of Runtime Error:
Program: CL_RSQ_ISET_SERVICE===========CP
Include: CL_RSQ_ISET_SERVICE===========CM016
Row: 136
Module Type: (METHOD)
Module Name: EXTEND_FIELD_BUFFER
Does any one can help me to understand why is this going on and how to solve this?
Thank you!!
Miriam

Hi Miriam
In the short dump you should also see the name of the infoset in question.
You probably have to adjust the infoset in transaction RSISET and they try to run the where used list again.
Best Regards,
Vincent

Where used list for business objects in TM

Hi,
There is a where used list framework in TM7 for
Transportation Zone, Lane etc. Is it possible to include the same for TCM business objects like
FA, Tariff, TCCS, Rate Table, Scale etc. Is it possible to do the customization?
Thanks and regards,
Suresh.

Hi
The following may of useful to you.
https://wiki.sdn.sap.com/wiki/display/ESpackages/IntegrationofTransportationManagementSystemBusinessObjects
Regards
Shan

Where used list doesn't work for global data

Hi,
When i try to do where used list on a constant in an include, it doesn't give the results for classes.
The class contains the include in a method that uses the constant, and the where used list for that constant doesn't find the appearance of the constant in the class.
I tried to look for oss note that solves the problem but i couldn't find any.

I tried to update the navigation index but it still doesn't work. from my debuging i found out that it just doesn't look in classes, all classes. I mean even in the where used itself there is not an option for used in classes. I checked it and it's a generic problem of the where used list for global data.
Edited by: Cohen Lior on Apr 14, 2010 6:52 PM

Table name for BW Query Where used list

Hi,
I am looking for Table name where the information of " where used list " of a BW query stores.
Any help ?
Thanks
Satya

Vani,
I dont think it is available...
whats your exact requirement???
you can make use of these below tables
RSZELTDIR              Directory of the reporting component elements
RSZELTTXT      Texts of reporting component elements
RSZELTXREF      Directory of query element references
RSRREPDIR             Directory of all reports (Query GENUNIID)
RSZCOMPDIR      Directory of reporting components
RSZRANGE      Selection specification for an element
RSZSELECT             Selection properties of an element
RSZELTDIR              Directory of the reporting component elements
RSZCOMPIC            Assignment reuseable component <-> InfoCube
RSZELTPRIO      Priorities with element collisions
RSZELTPROP      Element properties (settings)
RSZELTATTR      Attribute selection per dimension element
RSZCALC                    Definition of a formula element
RSZCEL                 Query Designer: Directory of Cells
RSZGLOBV            Global Variables in Reporting

Where used listing for Query Variables

Can someone tell me how to get this list from the metadata repository or from the transport connector?
I have read this thread "where used" list for BEx variables but this isn't working for us.
Is there some config that is required which we have missing?
We are running BI7 SP19 if this helps.
Thanks
Craig

Arun,
Yeah I figured as much, but this is why I am thinking we have something missing, config or otherwise.
Cause all I get when I do this is a new window with just the Variable details and nothing else, no where used list at all i.e.
Page Creation Date: 17.03.2009 15:12:03
Technical name: V_FSTMONTH
Object version: Active version
System: BWDCLNT200
Description (Short): 1st of Month to Toda
Description (Long): 1st of Month to Today
Last Changed On 17.03.2009 13:25:39
Last Changed by ARMSTEC
Is there something I need to get our Basis Team to do ?
Thanks
Craig

How to see an IDOC type & FM, "WHERE USED LIST"?

Hi Experts,
I nned to create an IDOC of WMTCID01 and message type is WMTOCO.
I wanna to see that, Where Where this IDOC was used(especially, in "Z" objects) so that, I can get some idea abt. it and do my coding.
So, let me know that, How to see this IDOC & FM, "WHERE USED LIST"
thanq

hi go to the tcode...
1) Create Segment ( WE31)
2) Create Idoc Type ( WE30)
3) Create Message Type ( WE81)
4) Assign Idoc Type to Message Type ( WE82)
Tcode- we19 is for testing idoc
in the we42 the message type and the idoc function module is ataached by the process code..
this is a best example to understand the creation of idocs(z)..
http://www.****************/Tutorials/ALE/CustomIDOC/Create.htm

Batch where used List

Similar Messages

Maybe you are looking for