Batch window in compressor not opening

Hi I just started using compressor and I can get all windows to open but I cannot get the batch window to open. I need to compress WAV files to MP3s for inclusion in my elearning software that I develop.

If you click in the batch window, the target options should become available. There are also other ways to apply new settings and destinations.
Good luck.
Russ

Similar Messages

Black screen after login. Windows 8 is not opening

After login, I only have a black screen with a cursor.
Windows 8 does not open. Cannot get to "System Restore" or Control Panel.
HP hardware self- diagnostic tests were negative & didn't help.
Please offer possible solutions for recovery.

Then that does not pertain to your problem.
On Kaspersky Rescue Disk on another computer download and burn to USB stick or DVD to run a full scan on your computer.
http://support.kaspersky.com/4162
Are you able to boot into Safe Mode to perform a System Restore?
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

In upper 1/4 of window, mouse will not open items

In firefox window mouse does not open items in top 1/3 of window. Normally arrow changes to pointer hand. This does not happen in upper 1/3 of opened window. In lines above the page items do open.

That problem can be caused by the Yahoo! Toolbar or the Babylon extension that extents too much downwards and covers the top part of the browser window and thus makes links and buttons in that part of the screen not clickable.
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

I can only open one Firefox browser window. When I click the firefox icon from desktop or taskbar to open up another browser window it does not open. I am ablt to open up new tabs within the one window.

I can only open one Firefox browser window. When I click the firefox icon from desktop or taskbar to open up another browser window it does not open. I am ablt to open up new tabs within the one window.

Have you tried: click Firefox button > New Tab > New Window '''''OR''''' CTRL+N '''''OR''''' File > New Window (if using the Menu Bar)
Once open, Firefox locks the Profile that is in use and you can not open another window with that Firefox version and Profile combination using the Windows Desktop icon or the Windows Programs list.

I have a Mac desktop OSX Version 10.7.4 upgraded to Lion to use iCloud. Now my Parallels Desktop 5 for Mac/Build 5.0.9376 using Windows 7 does not open. What upgrade of Parallels do I need to make this work?

I have a Mac desktop OSX Version 10.7.4 upgraded to Lion to use iCloud. Now my Parallels Desktop 5 for Mac/Build 5.0.9376 using Windows 7 does not open. What upgrade of Parallels do I need to make this work? Or what do I need to do at this point?

Thank you Shootist007. I appreciate it!

When I double-click the tab bar, FF4 just resizes the window but does not open a new tab

When I double-click the Tab Bar, FF 4.0 just resizes the window but does not open a new tab. It happens when Menu Bar is disabled (not ticked).

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes). 
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] 
 
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears. 
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions. 
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") 
Your plugins list shows outdated plugin(s) with known security and stability risks.
* Shockwave Flash 10.0 r32
* Java Plug-in 1.6.0_03 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
Update the [[Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/

Cant open a new batch window in Compressor 4

mac book pro osx 10.8.5
filed under Target (ie new target, new target with settings) are greyed out
Any suggestions?

If you click in the batch window, the target options should become available. There are also other ways to apply new settings and destinations.
Good luck.
Russ

Compressor not opening / new version not functioning

Hi folks- This is a stumper for any of you non-Intel chip users.
Short version: A new version of Compressor was installed on my G4 recently , which doesn't function properly. I tried uninstalling it, and reinstalling an older version, but the older version doesn't open.
Long version: I'm a professional videographer, and use FCP (Studio 1, 5.1) on a regular basis, frequently using DVD Studio Pro (4) for authoring DVDs, thus using Compressor (my last version was 2.3) as an intermediary.
For an unrelated project, I recently purchased Logic (8.0.2), which during installation also upgraded a few other Apple softwares in the process, including an upgrade to Compressor 3.0.3.
Unbeknownst to me, the Compressor 3.0.3 doesn't work on my machine properly, I'm guessing because it's an older machine. I opened up Compressor today for some routine work, to discover a warning that said:"The installed graphics card does not support the OpenGL features recommended by Compressor."
This warning still allowed me to open the program, but when I loaded up several files for compression, it gave me a warning, saying "Each target assigned to a job must have a setting and destination" EVEN THOUGH every item did indeed have both a destination and two settings. Hmmm...
So, I figured that since Compressor 3.0.3 wouldn't work correctly, I would uninstall it, and reinstall my older version off the FCP Studio disc. But when I did this, version 2.1 would NOT open at all on the machine. I could click the application all day long, but it won't open. Hmmm. I tried upgrading 2.1 to 2.3 through Apple's Software update, but the 2.3 upgraded to the 3.0 again. Arghh!
I'm either left with an un-openable 2.1 or a non-functioning 3.0. Any suggestions, recommendations?
-Chris

Hi Alberto-
Thanks for the reply, and the help. I was indeed dragging my settings onto the job itself (rather than the empty window), so I knew that wasn't the problem per se. But I'm so glad that you had within your previous post the URL to the Compressor Tutorial. Because at the very bottom of the tutorial page, I found exactly the problem I was having.
It's some strange quirk with Compressor 3--sometimes when you drag your settings onto the job, it still leaves the first line as a destination with no setting. That's what my machine was doing. It's an odd bug they should work out--and you can see what was happening on the bottom of the tutorial page you sent me.
Even so, I wasn't aware of this last night, so I had found an older support page about how to uninstall Compressor 3 (deleting files from the library folders & such--frameworks, receipts, et all), so I went ahead and did that, then reinstalled my Compressor 2.3 from scratch, and things worked well after that.
For the time being, then, I'm back to Compressor 2, but now I know that when I reinstall Compressor 3, I have to look out for that problem, and I'll know how to work around that odd quirk.
Thanks so much for your help, Alberto!!!
-Chris

I have uninstalled and reinstalled and Firefox for windows 7 will not open. There is no error message--it just doesn't open, even in safe mode. What do I do?

My computer is set to auto update for Windows 7 Home Premium and for Microsoft Office Professional Plus 2010. I am also running Norton 360. There was a major update for Office on 12/10/14 that seems to be when my problems started. This month, every time my updates have caused a reboot, Mozilla has failed to open. I have uninstalled it and reinstalled it several times, and it has only lasted a day or two before it crashes again. This last time it will still not open. All the instructions to troubleshoot seem to be based on the idea that the program is open and just has issues. I can't even get it to open up in Safe Mode.
I have tried to reinstall, and it says that it will launch automatically when the install is complete, but it is not working. Since Norton scans every download before it runs, I'm not certain if that is where the problem is since I never get the window that shows the step by step installer for Firefox.
What do I need to do?

Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. A clean reinstall is not the same as a regular reinstall performed using the built in installer. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from [https://www.mozilla.org mozilla.org] (or choose the download for your operating system and language from [https://www.mozilla.org/firefox/all/ this page]) and save the setup file to your computer.
#After the download finishes, close all Firefox windows (or open the Firefox menu [[Image:New Fx Menu]] and click the close button [[Image:Close 29]]).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
More information about reinstalling Firefox can be found [[Troubleshoot and diagnose Firefox problems#w_5-reinstall-firefox|here]].
WARNING: Do not use a third party uninstaller as part of this process. Doing so could permanently delete your [[Profiles|Firefox profile]] data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. These cannot be easily recovered unless they have been backed up to an external device! See [[Back up and restore information in Firefox profiles]]. 
Please report back to say if this helped you!
Thank you.

Quicktime will not install to Windows Vista "could not open key..."

I have been trying to install Quicktime for some time.
Get error message: "Could not open key: UNKNOWN\Components\9c430...... Verify that you have sufficient access to that key, or contact your local support personnel." The installer then rolls back.
I kept trying and was able to install QT, but it would not open. Error messagesaid something about a "side-by-side" configuration.
I am the only user/administrator of this pc. I have tried all troubleshooting steps on this website, including uninstalling all Apple software and all remnants.
I tried all troubleshooting steps. My next step is to re-install Windows.
HP d5000t Windows Vista Vista Ultimate 64-bit, Intel core2 quad Q9450 @ 2.66GHz 8GB RAM

Get error message: "Could not open key: UNKNOWN\Components\9c430...... Verify that you have sufficient access to that key, or contact your local support personnel." The installer then rolls back.
Doublechecking, Alex. Have you tried the procedures from the following post?
http://discussions.apple.com/thread.jspa?threadID=2475687&tstart=30
(Although that's about an iTunes install problem on 7 rather than QuickTime install problem on Vista, similar sorts of troubleshooting proicedures can apply in your circumstances too.)

After installing the safari update for windows outlook is not opening email links. I have set safari as my default browser but hyperlinks won't open a browser window - I get an error message - "This operation has been canceled due to restrictions in effec

After installing the safari update for windows, outlook is now not opening email hyperlinks. I have set safari to be my default browser but outlook won't open it when I click a link. I get the following message: "This operation has been canceled due to restrictions in effect on this computer. Please contact your system administrator." Please help.

Hi mcclausky, you may need to manually remove a policy setting from the registry. You also should scan for malware that might have created this problem.
This article lists scanning and cleaning tools other Firefox users have found helpful: [[Troubleshoot Firefox issues caused by malware]].
To check your Windows registry for policy settings that might affect Firefox or other programs, I suggest consulting a Windows forum or Microsoft's forums. For example:
* http://windowssecrets.com/forums/
* [http://answers.microsoft.com/en-us/windows/forum/windows_8-system/this-operation-has-been-cancelled-due-to/9677848e-072d-4206-87f4-9da9284d6151 This operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator. - Microsoft Community]
* [http://answers.microsoft.com/en-us/windows/forum/windows_xp-security/restrictions-this-operation-has-been-cancelled-due/8af1d0cd-8fbd-4223-9396-86d7497bb275 Restrictions. This operation has been cancelled due to to restrictions in effect on this computer.Please contact your system administrator. - Microsoft Community]

Windows 8 will not open

I have the windows 8.1 operating system. I've done all the deleting and reinstalling everything more than once now.
After that iTunes will open but only once. If I close the program it will not open again. Tried troubleshooting it through the computer but no luck!
HELP

So did troubleshooting with a different computer work or no? Sounds like you need to contact Microsoft to have them take a look into your registry and clean it up.

ITunes 10.4 Windows 7 Does not Open

After updating itunes to 10.4 on my Windows 7 (Sp1) 64 bit system, iTunes will not open. I have dug deeply into the Community suggests and followed recommended advnice including the 7/14/11 "Removing and Reinstalling iTunes." I did uninstall ALL Apple programs (iTunes, QT, SOftware update, Mobile Device Support, Bonjour, and Apple Application Support. Removed all program references as well. (Computer literate, CompTIA A+ certified so fairly knowledgeable although we all know a little knowledge is a dangerous thing!)
As a work around until an update fixes the problem, I did discover that using Windows 7 "Troubleshoot Compatibility" opten WILL open iTunes 10.4 so at least for now I have a workaround.
Looking forward to the "old days" when it starts in Win7.
Thanks,
Ed

Using the Windows 7 Troubleshooting Capability and it did try to start iTunes (a black window flashed briefly) but was unsuccessful.

Firefox does not want to open popup or when I do "file new window" it does not open it too.

When I click on a link that opens a popup, firefox does not open it. Same for "File> New Window." Then, often after Firefox starts to malfunction and no longer wants to open my bookmarks. I uninstalled and reinstalled firefox, removed all extensions .. But this does not solve my problem. can you help me please?
Excuse me for my mistakes in English, I am a French person and I try to speak English the best I can so that you can solve my problem. Thank you.
== This happened ==
Every time Firefox opened
== I clic on a link that opens a popu

Your above posted troubleshooting list shows quite a few extensions.
Did you really disable all of them and still had the problem?
See [[Troubleshooting extensions and themes]]
Which security software (firewall) do you have?
Some can block pop-ups as well.

Files from Windows Vista do not open in Bridge CS5

I am having trouble opening my images from Window Explorer level with Bridge.
I tried to open my jpgs with "open with" option and my PC does nothing. Same happens when I double click the raw images.
I have my jpgs assigned to open in windows but I assigned my raw files to open in Bridge CS5 unfortunately raws will not open after double click.
Can someone help?
Thanks

Perhaps it is just semantics, but you want the double click to open in Photoshop CS5 and not Bridge. Same thing with the raw it should open in ACR and not Bridge, as Bridge is just a browser.
With your raw problem. If you open photoshop and click help/about plug-in/camera raw you should get one version listed. Most camera raw problems result from ACR in wrong folder, or more than one version in the folder.

Batch window in compressor not opening

Similar Messages

Maybe you are looking for