Batch with restricted status not allowed to consumed in Process order/Staged/Deliver

Hi
My requirement is batch with restricted status can NOT be
- consumed in process order via MIGO or MB1A
- Can not be delivered to Customer
- Can not be allowed / available to be staged
Together with your input i want to make development strong/defect free/consider all aspects.....kindly suggest
Thanks & Regards
Prashant Gupta

I still believe that this is configurable I believe that a PP-PI person can control that restricted stock is not allowed for use in orders.
Restricted stock should already not be allowed to be sent to a customer.
I'm not sure what you mean by staged. That can be different in different places. I assume you mean some type of stock transfer to a different storage location?
You can also use batch search strategies to prevent selecting restricted stock as well in almost all areas.
Again, there should not be a need for custom development.
Craig

Similar Messages

Fiscal Year Not allowed while creating the Process order (COR1)

Hi Friends,
My Indian client is following the Fiscal year of 2011 for the period of April 2010 to March 2011). We have gone live one month before. But now the problem we are facing is while creating the process order (T.Code COR1) system gives the error message "Fiscal year 2010 is not allowed".
The Diagnosis shows as below
Fiscal year 2010 is not allowed
Message no. F5568
Diagnosis
The fiscal year entered (2010) is different from the fiscal year derived from the posting date and fiscal year variant (2011).
System Response
Error.
Procedure
Correct the fiscal year entered.
I have Checked the Controlling area version. Fiscal Year 2011 starts from 01.04.2010. This issue is only at the time of Process oder creation and not in other module like FI, MM, SD, PS, QM and PM. I have checked with V3 Variant also and there is no problem with that.
Can any one help me where the setting is missing or what whould be the probable reason for this issue.
Regards,
Deva

Hi Prakash,
Thank you for your reply. I have checked the MMPV and MMRV set up and that is fine with fiscal year 2011. We are also processed lot many Material receipts for the fiscal year 2011. I have checked with OB52 for finace it is opened for the entire year of 2011 from 2009 for all periods.
We are facing only when we try to create the process order. When we enter the starte date as 24.11.2010 the derived period shows as fiscal year 2011. But entered fiscal year shows as 2010. We are not entering any other dates in the process order.
Is there any other probablity the date is picking from any Production related set ups??
The costing version fiscal year 2011 starts from 01.04.2010. So no problem with Controlling area. I have Checked the Factory calendar. The calendar starts from 01.01.2010 to 31.12.2010 for the year 2010.
Is there any other possibility of the missing settings or problem in date control???
Regards,
Deva

Customer Standard Order was delivered with credit status not approved and blocked.

The Customer Standard Order was delivered with the credit status not approved and blocked.
3 orders were delivered without credit limit and now the credit limit is exceed in more than 250%,
We have checked the settings in OVAK and the assignment is correctly set as D and 01. This is an issue with a high risk customer with static check in OVA8 transaction.
Please advice.
BR
Anuja

The Customer Standard Order was delivered with the credit status not approved and blocked.
If the sales order is blocked system can not allow you to create delivery with out approving it.
3 orders were delivered without credit limit and now the credit limit is exceed in more than 250%
There could be reason that in FD32 for the payer customer the risk category might not have been assigned during those 3 sales orders creation. Also one more reason in OVA8 against the Static credit check if open order field is not ticked.
Please let me understand what is your exact issue currently?
thanks,
Srinu.

"Restrictions Do Not Allow Explicit Content"???

Downloaded a few podcasts yesterday. Listened to one of them on the ride home last night (from my iPhone, after syncing). Tried to pick up where I left off this morning, and these particular podcasts are "grayed out" and, when tapped, say "Content Not Allowed. Restrictions do not allow explicit content". I checked my iTunes preferences (Parental), nothing is checked, no restrictions. These are the very same podcasts I was listening to 12 hours ago! And they play fine on my computer, within iTunes. Just won't play on the iPhone after syncing. And it's just these podcasts (Start Up by Alex Blumberg -- far from explicit or pornographic). All the others are playing fine on the iPhone.
Any ideas?

I do not understand why APPLE is making it Rocket Science to protect our kids from this por-nography through their Store.
I have been in a dialgue with APPLE now for 2 weeks about the APP's that continue to come up, and researching further their podcasts also. They continue, as recommended here, to suggest that you complain to the a feedback link that, unfortunately, ends with a thank you and we will not be contacting you personally about this.
My suggestion is that you go to one of their 24 hour response links, here is one! (http://www.apple.com/support/itunes/contact.html?form=app_store&topic=App%20Stor e&subtopic=Downloading%20and%20updating%20Applications) and complain there. It is their respondsibility to manage their content.
The other suggestion is to notify everyone you know of your issue with APPLE and encourage them to also notify APPLE!
Everyone that I have notified is equally dissatisfied with APPLE.
Shame, we have to go so far to get APPLE to do what's right!

Cannot send e-mail ...restricted relaying not allowed

Hi, I installed and activated the mail programm according to the instruction by SWISSCOM. I can receive mail und I can send mail to [email protected] but if I send a mail to [email protected] I get a message: e-mail cannot be sent via server "smtpauth.bluewin.ch" .... restricted relaying not allowed! How can I sold this problem? Thanks. kingfilou

Who is the Systemadministrator?
It appears to be kingfilou!
Hmm, seems there directions differ...
Enter the number 587 into the "Outgoing server (SMTP):" field.
Click "OK" then "Close".
... set up to use SMTP authentication. You can now increase the security level, and transmit your e-mails via an SSL encrypted connection. The SSL (Secure Socket Layer) protocol makes the data stream "tap-proof".
You must make the following settings:
Incoming server (POP3): pop3s.bluewin.ch
Outgoing server (SMTP): smtpauths.bluewin.ch
... enter the number 465 into the "Outgoing server (SMTP):" field. Check the option "This server requires an encrypted connection (SSL)".
Type the number 995 into the "Incoming server (POP3):" field. Check the option "This server requires an encrypted connection (SSL)".
These directions are foe Outlook on a PC, but should be the same for you...
http://tinyurl.com/czsnys
Apple Mail for that ISP...
http://www.libellules.ch/support/creercompte_applemailen.php

Sytem should not allow to save the sales order based on risk category

Hi,
My user want to control the creation of sales orders based on risk category in credit control area.
We created a new risk category - 30 Not authorized.
And we made necessary configs also , like assignment of risk category and company code in OVFL.
We assigned 30 risk category in FD32 for customers also.
But while creation of sales order system is allowing to save the order.
My user requirement system shoud not allow to save the sales orders for those are customers belongs to 30 risk category.
How can we config. this
thanks
Sateesh

hi,
dont want to save the sales order if the credit limit exist ?
then maintain block in OVA8
choose
your credit control area risk categories credit group
1000 30 Not authorized 01
checks tab
choose static and maintain B
this will give you error message and it will not allow you to save the sales order
regards
senya
Edited by: senya_1111 on Oct 1, 2009 2:26 PM

Junitreport 'redirect' is not allowed when the secure processing feature is set to true.

junitreport 'redirect' is not allowed when the secure processing feature is set to true.
Hello,
   I'm running flexunit4.1.0-8 and I have an ant script running the test suite.    I recently upgraded from FB 4 to 4.5 and now I'm getting
failures on junitreports. Here's the full error:
[junitreport] : Error! Use of the extension element 'redirect' is not allowed when the secure processing feature is set to true.
[junitreport] Failed to process C:\TDMSE_2_6\tdmse\flex-test\flex_unit_reports\TESTS-TestSuites.xml
BUILD FAILED
C:\TDMSE_2_6\tdmse\build\flexunitbuild.xml:116: Errors while applying transformations: javax.xml.transform.TransformerException: java.lang.RuntimeException: Use of the extension element 'redirect' is not allowed when the secure processing feature is set to true.
Here's the junitreport section:
[code]
<target name="flex-unit-execute-tdmse-test-runner"
                              description="executes the test runner app">
          <flexunit swf="${FLEX_UNIT_TEST_HOME}/TDMSETestRunner.swf"
                              toDir="${FLEX_UNIT_REPORTS_HOME}"
                              haltonfailure="false"
                              localTrusted="true"
                              verbose="true"
                              headless="false"/>
          <junitreport todir="${FLEX_UNIT_REPORTS_HOME}">
                    <fileset dir="${FLEX_UNIT_REPORTS_HOME}">
                              <include name="Test-*.xml"/>
                    </fileset>
                    <report format="frames" todir="${FLEX_UNIT_REPORTS_HOME}/html"/>
          </junitreport>
</target>
[/code]
And here's the full ant build:
[code]
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE project>

          
<project name="flexunitbuild" basedir="." default="flex-unit-start-test-runner">
          <tstamp>
                    <format property="build.date" pattern="MMMMM dd, yyyy" />
                    <format property="build.time" pattern="HH:mm:ss" />
          </tstamp>
          <property name="tdmsedir" value="${basedir}/.." />
          <property name="builddir" value="${tdmsedir}/../build" />
          <property name="FLEX_HOME" value="${builddir}/tools/flex-4.5.0" />
          <property name="PARSLEY_HOME" value="${builddir}/tools/parsley-2.4.0" />
          <property name="FLEX_UNIT_HOME" value="${tdmsedir}/flex-test" />
          <property name="FLEX_UNIT_LIBS_HOME" value="${builddir}/tools/flexunit-4.1.0-8" />
          <property name="FLEX_UNIT_REPORTS_HOME" value="${FLEX_UNIT_HOME}/flex_unit_reports" />
          <property name="FLEX_UNIT_TEST_HOME" value="${FLEX_UNIT_HOME}/flex_unit_tests" />
          
          <taskdef resource="flexTasks.tasks" classpath="${FLEX_HOME}/ant/lib/flexTasks.jar"/>
          <taskdef resource="flexUnitTasks.tasks" classpath="${FLEX_UNIT_LIBS_HOME}/flexUnitTasks-4.1.0-8.jar" />
          
          <echo>basedir: ${basedir}</echo>
          <echo>tdmsedir: ${tdmsedir}</echo>
          <echo>builddir: ${builddir}</echo>
          <echo>FLEX_HOME: ${FLEX_HOME}</echo>
          <echo>FLEX_UNIT_HOME: ${FLEX_UNIT_HOME}</echo>
          <echo>FLEX_UNIT_LIBS_HOME: ${FLEX_UNIT_LIBS_HOME}</echo>
          <echo>FLEX_UNIT_REPORTS_HOME: ${FLEX_UNIT_REPORTS_HOME}</echo>
          
          <target name="flex-unit-start-test-runner"
                              description="clean, compile and run tdmse flexunit tests"
                              depends="flex-unit-clean-tdmse-tests,
                              flex-unit-tdmse-compile-test-suite,
                              flex-unit-execute-tdmse-test-runner"/>
          <target name="flex-unit-clean-tdmse-tests" description="Cleans the FlexUnit test and reports directories">
                    <delete dir="${FLEX_UNIT_REPORTS_HOME}" failOnError="false"
                                        includeEmptyDirs="true" />
                    <mkdir dir="${FLEX_UNIT_REPORTS_HOME}" />
                    <delete dir="${FLEX_UNIT_TEST_HOME}" failOnError="false"
                                        includeEmptyDirs="true" />
                    <mkdir dir="${FLEX_UNIT_TEST_HOME}" />
          </target>
          <target name="flex-unit-tdmse-compile-test-suite">
                    <mxmlc file="${tdmsedir}/flex-src/TDMSETestRunner.mxml"
                                        output="${FLEX_UNIT_TEST_HOME}/TDMSETestRunner.swf">
                              <load-config filename="${FLEX_HOME}/frameworks/flex-config.xml"/>
                              
            <locale>en_US</locale>
            <source-path path-element="${tdmsedir}/flex-src/locale/{locale}" />
            <include-resource-bundles>COMMON</include-resource-bundles>
            <include-resource-bundles>OW</include-resource-bundles>
            <include-resource-bundles>PREF</include-resource-bundles>
            <include-resource-bundles>RD</include-resource-bundles>
            <include-resource-bundles>RG</include-resource-bundles>
                              
                              <compiler.library-path dir="${PARSLEY_HOME}" append="true">
                                        <include name="parsley-flex4-2.4.0.swc" />
                                        <include name="spicelib-flex-2.4.0.swc" />
                              </compiler.library-path>
                              
                              <source-path path-element="${tdmsedir}/flex-src" />
                              <source-path path-element="${tdmsedir}/flex-test" />
                              
                              <compiler.library-path dir="${FLEX_UNIT_LIBS_HOME}" append="true">
                                        <include name="*.swc"/>
                              </compiler.library-path>
                              
                              <compiler.library-path dir="${FLEX_UNIT_LIBS_HOME}/mocklibs" append="true">
                                        <include name="*.swc"/>
                              </compiler.library-path>
                              <compiler.verbose-stacktraces>true</compiler.verbose-stacktraces>
                              <compiler.headless-server>true</compiler.headless-server>
                    </mxmlc>
          </target>
          <target name="flex-unit-execute-tdmse-test-runner"
                                        description="executes the test runner app">
                    <flexunit swf="${FLEX_UNIT_TEST_HOME}/TDMSETestRunner.swf"
                                        toDir="${FLEX_UNIT_REPORTS_HOME}"
                                        haltonfailure="false"
                                        localTrusted="true"
                                        verbose="true"
                                        headless="false"/>
                    <junitreport todir="${FLEX_UNIT_REPORTS_HOME}">
                              <fileset dir="${FLEX_UNIT_REPORTS_HOME}">
                                        <include name="Test-*.xml"/>
                              </fileset>
                              <report format="frames" todir="${FLEX_UNIT_REPORTS_HOME}/html"/>
                    </junitreport>
          </target>
          
</project>
[/code]
I haven't seen much info about this problem anywhere on google except for this forum post:
http://forums.adobe.com/thread/740146
Thanks for any help!

If you include the xalan.jar library to the build.xml execution classpath everything works!!!!!!.
I hope it will be userfull.

Rename with resequence does not allow 6 digits

OS: Win XP
Bridge: 3.0.0.464
Batch rename of files allows a sequence number that is limited to 5 digits. Even though the selector control allows you to specify six digits, the sequence number box does not allow the entry of the 6th digit. For example, I have the following:
New file name:
text: tf
sequence number: 40389
allow: Six Digits
If I attempt to enter the sixth digit, I get a "beep" and the entry is not allowed. The Preview at the bottom indicates:
Current file name: tf0001.cr2
New filename: tf0403980.cr2
It might also be useful to allow seven digits on the sequence number.
The motivation for this is to allow perpetual sequence numbers. I have named all of my digital images with the series tf######. At present, I have over 400,000 images in my system. This provides a unique image identification without restoring to additional information such as "date + subject". In this way, all images on my web pages are identified by this simple number and a customer can simply provide a file number as an image reference - no matter when the image was taken or for which event.

Be careful with setting the user agent to IE because that can make website send content (JavaScript and CSS) files that only work in IE and not in Firefox.<br />
Google Docs should work in Firefox with the normal settings, unless Ubuntu made some changes with their branded version that is causing problems on that site.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Table mtl_material_transactions_temp with Negative balances not allowed

Hi,
I have uploaded few wrong cycle count adjustments that got duplicated and now
they are stuck in
table mtl_material_transactions_temp with error
Negative balances not allowed
Is there a way to fix them as they are showing in Un-processed material when
I try to close the period.
I need to close they period.
Re-submitting them also dont works and it get the same error.
Is there a way to get rid of these record?
thanks for help.
7Z

hi,
If this message you are getting Negative balances not allowed, you need to increase the onhand quantity in the subinventory and reprocess or better you can delete the record and try it again with the corrections.
Regards,
Syed

Problem with Exception - "Content not allowed in Prolog"

I was using org.w3c.dom package to handle all my XML data in JDK 1.4.1 environment. Recently, I have upgraded my Java version to JDK 1.5. When I run my code, while parsing the XML data, it is throwing an Exception - "Content not allowed in Prolog". I know that this Exception is because the XML data does not contain xml declaration in prolog.
But, I have the code that queries the database and builds the records in XML format. The sample XML is as follows.
<list>
<row>
<fld1>Val1</fld1>
<fld2>Val2</fld2>
</row>
<row>
<fld1>Val3</fld1>
<fld2>Val4</fld2>
</row>
</list>
I want to know why the JVM is validating for XML declaration? Why can't it continue parsing the XML in case it is well formed? Is there any way so that I can skip this validation?
Please reply. I am in a big trouble because, in case some changes are required, I need to implement in many places of my API.

The isELIgnored flag just fixes this page.
If you want to use EL on your pages a better solution is to update your web.xml file:
EL Expressions in JSP2.0 containers:
In order to evaluate EL expressions, your web.xml file must be up to date.
If web.xml states that it is version 2.3 or less, then EL evaluation is disabled by default for backwards compatibility.
So if your web.xml starts with this:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>Replace it with this
<?xml version="1.0" encoding="ISO-8859-1"?>
<web-app xmlns="http://java.sun.com/xml/ns/j2ee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd"
version="2.4">
Cheers,
evnafets

Quality Certificate Issue with multiple batchs with same delivery note

Hi,
Hi,
My Company Business Process:
Quality certificates are generated prior to the good receipt through IDOC process.
When we receive the goods, GR should look for existing quality certificates and trasnfer the inspection results to inspection lot.
When we are trying to receive for single batch & delivery note, It is looking for existing quality certificates. There is no problem in this senario.
But when we receive the multiple batchs with the same delivery note, system is generating new quality certificates. It is not looking for existing QC which got generated through IDOC process. This is the actual proble.
Note: I am not sure is standard SAP does not supprot to receive the multiple batchs with the same delivery note or not at the time of GR. Please advise me.
Thanks,
Suman

In data origin in certificate profile SAP supports " mix the origins within a characteristic. For example, the results data can originate from an inspection and the specification data can originate from batch determination."
Now here question arises Is batch determination of one batch or multiple bacthes took place against a single delivery note.
As per my understnading it should be one batch with is supported in std SAP.

Credit Status "Not allowed" but schedule line still confirmed

I have a little issue. I know is sth from configuration, but I don't remember where it is.
When automatic credit check is performed, and a sales order goes to "Credit Not allowed" I would like the position of the order remains unconfirmed, in order to leave the stock free for other orders.
Now the system leave the schedule lines created, confirmed, even when credit stock is "not allowed". Could sb help on this?
Regards

Hi Eduardo Vartorelli
For the Sales Order to stop the flow of requirements to MRP You have to set the status in the requirement.
Go to T code OVB8 and then set what is your requirement in the routine.
Currently the routine checks only for credit status in VBUK - CMGST if the status is B then it will not transfer the requirements to the MRP.
I am not sure what is the Credit status of your document in the VBUK. If its not "B" and still you want to hold the requirements then you can modify the routine to handle your new requirement.
If the status is B and then the requirements are trasnfering then you need to put a Break point in the rouitne and check if the routine is actually getting called or not.
The Program Name is LV07A101.
Thanks & Regards
Srinivas.
Reward Points if Useful

Picking batch in restricted status

Hello all,
I have a process order in which the user entered restricted batch at the time of confirmation(He inserted it unknowingly).Now the user want to know how picking of restricted batch could be prevented in future?Is there any settings by which we can block or prevent picking a restricted batch while confirming an order,
If so,please explain the steps how to configure the same.
Thanks in advance
Regards
George

Hi George,
Please explore in the T-code
COB1- batch Search strategy
CU70 - Sorting rule
OPLG - batch Search procedure defination
Apart from that you look into SPRO - > Logistics General - >
Batch Management- >Batch Determination and Batch Check
Here you can get the comprehensive setting for batch determination in IM , PP & SD.
I hope this will solve your issue ....... you need to maintain a selection criteria in which batches which are in unrestricted will only be picked............
Do let me know if you have any further query on this
Regards
Kaushik

Do not allow User to Booked Sales Order if Line QTY is not enough.

Hi All,
Is there a way in Order Management setup to not allow sales people to Booked their Sales Order if there are order lines where the qty is not enough in the Inventory, where it will cause 'Backorder' if picked and shipped?
Regards,
Ja

Jay
Is there a business reason to stop booking? The order is already entered and if you want to stop booking, at that time, will they go back and book the orders later?
It hampers your business knowing the demand for your product. Back ordering is a good thing and not necessarily evil.
If you still want to do this you have to use inv_quantity_tree_pub.query_quantities to get the quantities. As Sandeep said, it is better you do this in Order header workflow by calling this and based on the result you can decide what you want.
Thanks

261E movement type to be allowed during GI of Process Order

Dear Collegues,
We are trying for a scenario, Where From Sales Order to Process Order directly to be made.
Now the default movement type for GI of the order is coming 261 E . But system is not allowing with this movement & also this movement is not coming in dropdown. How it is to be mapped , please co-operate.
Best Regards
Aniruddha Biswas

Hi Aniruddha,
Please check with the stock of the components to be issued to order, it should be enough stock in the sale order stock.(customer stock - MD)04)
Other wise system will not allow to issue from the general stock , make the stock for ur component and try.
If ur component is Raw material, to avoid this, set coll/ind = 2 for component at MRP view.
Then create new order and make goods issue.
Regarsd
pradeep

Batch with restricted status not allowed to consumed in Process order/Staged/Deliver

Similar Messages

Maybe you are looking for