Batches and Serial numbers
Hi,
How can i create Batches and Serial numbers for a item in inventory in SAP B1
Hi Sudha,
One of my ckient he purchases Raw Material and converts it into finished good and he want to know the cost which occurs in the process of production and where he can see that in SAP B1 and after it is converted into Finished Good it takes some time to be sold and at that time where can he chek his inventory level .
I think in SAP B1 if we enter a item as a raw material it will be shown as raw material till the time it is sold .
Can u plz help me out in this how should i map his process in SAP B1 is that possible or not.
Regards
Naveen.G
Similar Messages
-
No matching records found 'Batchs and Serial Numbers' (OSRD) (ODBC-1028)
Hi experts,
These days In our 2007 system, we had a serial number maintain problem on 'Recipt from Production' transaction.
When we open 'Serial Number Management' form, we can not update S/N by 'Complete' operation mode for some items. but it works for 'Update' operation mode.
The system show 'No matching records found 'Batchs and Serial Numbers' (OSRD) (ODBC-1028)' in the status bar.
How could I fix it ?
thanks for your help.Hi Wilson,
Do you manage the serial number transaction for respective item with "On Every Transaction" or "On Release Only" (in Item master data)? Because, when you manage those item with "On Every Transaction", you should already filled the serial number when you tried to receive those item whether by Goods Receipt PO or Receive from Production transaction.
"Complete" operation in Serial Numbers Management only works for item which you manage by "On Release Only", it doesn't work for item which managed using "On Every Transaction". Hope I don't misunderstood your question.
Best Regards,
Hendry Wijaya -
Batch and serial numbers in Crystal Document Layouts
I am attempting to write a set of document layouts using Crystal reports namely, Sales Order, AR Invoice (Items), Delivery Note. The stock items are either serial numbered items or batch numbered. I need to display the serial numbers or batch numbers on the Delivery Note, but cannot find a suitable link to the tables where the serial number/batch numbers are stored.
I have identified the following tables as likely candidates for use in the document layout, but cannot see how I might join them to the ODLN or DLN1 tables:
For the Batch Numbers OBTN; ITL1 and ILM1
For the Serial Numbers OSRN and views OSRI; SRI1 and SRI1_LINK.
Does anyone know or have suggestions on how to link these (or other?) tables to the DLN1? Thanks in advance
DavidFrom memory, the link needs to be to SRI1 joined on Base Doc Type, Doc Entry / Base Doc entry, Item Code & row / line num (for serial numbers anyway...)
-
Difference between Batch and Serial Numbers
Hi,
Can anybody explain the difference between Serial numbers and Batches. Which business process use these and their advantages.
Rewards for the right answers.
Regards
Goutham>
goutham p wrote:
> Hi,
>
> Can anybody explain the difference between Serial numbers and Batches. Which business process use these and their advantages.
>
> Rewards for the right answers.
>
> Regards
> Goutham
HI Goutham,
Serial Number: is nothing but normal numbering to uniquely identify every single piece of product.
Say in mobile industry every mobile has unique IMSI number that can be thought of as its serial number.
Given a serial number you can pin point the particular piece of product.
Batch Number:
Is Nothing but combining the products produced under certain conditions in a batch.
For Example in Oil industry if we talk about 2T oil etc the viscosity, Density etc are quite important.
Now due to slight variations in production the Viscosity Density would not be exactly same for 2 different lots.
So we maintain Batch where we put classification Criteria in Classification view in Material Master.
If the criteria are for example Viscosity and density
Batch1 could be Viscosity=100 density=10
Batch2 Could be Viscosity=110.5 Density=9.71
So while selling by knowing Batch number we can tell the customer about the properties.
Also you would have heard about recall of all the vehicles of Batch so and so from toyota.
Recently Nokia called off all the Batteries BL-5C batteries of a batch.
The reason is they were all manufactured at one time and hence since one of them had that error all would have had the same. So the whole batch can be recalled.
Reward if helpful
-Abhishek -
DI-Error: You cannot select batch or serial numbers for a closed row
Hello Experts,
I have several B1-Systems connected to R/3-Systems via B1iSN.
In B1 for example I have 2 rows in Purchase Order. One row was closed by a goods receipt - 1 row is still open.
From our R/3-System we send Order-Acknowledgements to B1. Because line 1 is already closed we want to ignore row 1 and update only information in row 2. By using KeyExpansion I could solve that requirement (check in B1-System if row is already closed -> insert row in IDoc only with LineNum). For example:
<Document_Lines>
*<row>* <!-- ignore -->
*<LineNum>0</LineNum>*
*</row>*
<row> <!-- update -->
<LineNum>1</LineNum>
<ItemCode>ABCDEFGHIJK</ItemCode>
</row>
</Document_Lines>
Unfortunately DI-API does not allow to update each row separated. I always have to send all rows in IDoc even if one row is closed.
For one B1-Company batchnumbers on every transaction is required. When creating Goods Receipt we have to define a batchnumber for item. But now if I want to update a open row (as described above) I get an B1iSN-Error:
DI Error: (-10) You cannot select batch or serial numbers for a closed row
Any ideas to solve that Error? Thanks.
Regards,
GBHi Bastian,
I have still one open question. How to tread Document Lines Additional Expenses?
If I use the logic of visual order I still get the error "You cannot select batch or serial numbers for a closed row".
Example:
<Document_LinesAdditionalExpenses>
- <row>
<LineNumber>4</LineNumber>*no expenses*
</row>
- <row>
<LineNumber>0</LineNumber>*no expenses*
</row>
- <row>
<LineNumber>1</LineNumber>*no expenses*
</row>
- <row>
<LineNumber>2</LineNumber>*no expenses*
</row>
- <row>
<LineNumber>3</LineNumber>*expenses correct*
<ExpenseCode>3</ExpenseCode>
<LineTotal>10.00</LineTotal>
</row>
</Document_LinesAdditionalExpenses>
How can I solve that?
Thanks and regards,
GB -
Hi, can anyone help me out with this question?
How can I find out which version of Ipod touch I have. I only have the model and serial numbers as it was a gift, but I would like to download IOS 5 if it is compatible?
Very frustrated Ipod user, any advice would be much appreciated.
Lynda.I had the same problem because there are so many iPod models. There is a great article in Wikileaks that explains it all and also has pictures. I'm confident this answer your question.
-
Archiving Equipments and Serial Numbers
Dear PM Experts,
I have searched alot for how to do archiving for equipments and serial numbers and i used SARA and maintained variant what so ever but at the end i got the job cancelled in the log , can anyone please tell me steps to do archiving for equipments and serial numbers in brief, I really appreciate all the great support here,
Much Thanks in advanceHi,
[Archiving Serial Numbers|http://help.sap.com/saphelp_46c/helpdata/en/38/d2a784d02411d395c500a0c93029cf/content.htm]
[Useful Link|http://www.sapfans.com/forums/viewtopic.php?f=7&t=169672]
I have not tried this (equipment with serial number).
BADI_CCM_EQUI_ARC. This is Equipment Archiving BADI => Analyse this with your ABAPer.
Regards,
Maheswaran. -
I have lost my Dreamweaver MX Studio disks and serial numbers
I have lost my Dreamweaver MX Studio disks and serial numbers and the PC on which the suite was installed was destroyed. Can I download this suite and run it on my new PC?
BenleRoter wrote:
PC on which the suite was installed was destroyed.
I believe you will be getting the new computer on which Dreamweaver MX will not be compatible as it is very old. My suggestion would be to get the new version of Dreamweaver. -
If you had mismatched MEID and serial numbers, look here!!
My issue has finally been solved by Verizon for my mismatched MEID and Serial numbers. The tech support guy was just about to fill out the DOA form to get a new phone when he asked me if they tried switching the MEIDs in the system. I gave him the MEID that was in my phone and after a few minutes, my phone was activated. Don't let any reps tell you any different. Just tell them they need to switch the MEID in their side of the system. Hope this helps everyone having problems! Good luck!
My issue has finally been solved by Verizon for my mismatched MEID and Serial numbers. The tech support guy was just about to fill out the DOA form to get a new phone when he asked me if they tried switching the MEIDs in the system. I gave him the MEID that was in my phone and after a few minutes, my phone was activated. Don't let any reps tell you any different. Just tell them they need to switch the MEID in their side of the system. Hope this helps everyone having problems! Good luck!
-
I need do download Photoshop Extended from my adobe account. I bought it in 2011 when I live in Canada and was using a windows based laptop. I now live in South Africa and use a Mac. I can only access my products and serial numbers. How do I download???
As long as you have a legitimate serial number, you can just download a trial version of the version you need from the public Adobe site, install it and input your valid serial number upon installing it.
You will need to apply all available updates, as all downloads are of the original release.
The Extended and the Standard version of Photoshop are one and the same binary. It's your serial number that makes it Extended or Standard. -
Need help in query to display lot and serial numbers for a Wip Job Component
Hi ALL,
I have a requirement as below.
I need to display lot and serial numbers for a Wip Job Component, i have a xml report in that for each wip job component i need to check whether it is a lot control item or serial control item based on that i need to display some data. so can you please help me to get the query to indentify the lot and serial number for a wip job component.
ThanksThank you for replying Gordon. I did not remember I had asked this before. I no longer have access to the other account.
What I need on the query is that I want a list of items with the on order quantity and when we are expecting this order to be received. The receiving date is based on the PO delivery date. The trick here is that I need to Master sku to show the delivery date of the component sku. In my scenario all components have the same delivery date for the Master sku. If there are mulitple delivery dates because each warehouse is getting them on a different date then I want to get the delivery date for that warehouse.
Let me know if this is possible and if yes please guide towards a query for it.
Thank you. -
Set Article which control batch and serial number at component level
Dear experts,
I have some concern about set article as the requirement for sale set my company would like to control inventory at component level and at the component level we required to control batch and serial number.
So, when posting GR of sale set article system will auto split material to control inventory at component level with MVT 319 and in this step should possible to manual define serial number for component.
Example
Header Sale Set A (Activate valuation type)
Comp1 : B (Activate serial number and control serial number during GR ref PO , control Batch)
Comp2 : C (Control Batch)
GR : Header Sale Set A
Expected Solution : System should automatic to split to comp1 and comp2 , for Comp1 B will require to input serial number.
Fact : During testing, system auto split to comp1 and comp2 for comp1 I can input serial number but after save the serial number that I input are gone.
I 'm not sure that for set article can we control serial number at component level? If anyone have the expereince in this. Please help ?
Best Regards,
KateDear experts,
I have some concern about set article as the requirement for sale set my company would like to control inventory at component level and at the component level we required to control batch and serial number.
So, when posting GR of sale set article system will auto split material to control inventory at component level with MVT 319 and in this step should possible to manual define serial number for component.
Example
Header Sale Set A (Activate valuation type)
Comp1 : B (Activate serial number and control serial number during GR ref PO , control Batch)
Comp2 : C (Control Batch)
GR : Header Sale Set A
Expected Solution : System should automatic to split to comp1 and comp2 , for Comp1 B will require to input serial number.
Fact : During testing, system auto split to comp1 and comp2 for comp1 I can input serial number but after save the serial number that I input are gone.
I 'm not sure that for set article can we control serial number at component level? If anyone have the expereince in this. Please help ?
Best Regards,
Kate -
Goods Receipt and Serial Numbers
I'm getting the following error "[IGN1.WhsCode][line: 1] , 'This entry already exists in the following tables (ODBC -2035)'" when trying to add a goods receipt document containing a single item that is serial number managed via the DI API. We are running against Business One version 2005A SP01 PL9. The Goods Receipt PO transaction is reporting the same error. The Goods Issue and Delivery transaction appeared to work correctly. The Goods Receipt transaction posted correctly when created in the B1 Client (GUI) application. So it is an issue with the DI API. We are using the SBODemo_US company database but we added a new item and configured it for serial number management. This same code works with B1 2004A. Our application is suppose to work with both versions of B1, so our application is built with version 2004A DI API. Should this work, or do I need to use the 2005A version of the DI API when communicating with a 2005A system? Would this version of the DI API work correctly with a 2004A system?
Thanks,
Jason EilerI remembered encountering the same problem working with B1 2004A. For the Goods Receipt and Goods Receipt PO documents, when receiving items that are serial managed I would fill in the InternalSerialNumber data member of the Document Lines Serial Numbers object. The fix was I also had to provide some value for the SystemSerialNumber field. I just always set it to a value of 1. In B1 2005A, this issue must have been resolved, because when I commented out this line of code, the document was added successfully. I don't have to provide a SystemSerialNumber, the system must generate one, as I would expect.
-
Delivery notes and serial numbers
Hi
I have a simple SQL question.
How do I get the serial numbers in "plain SQL"?
The SDK "Help Center" shows that I can get the delivey notes from the ODLN table and then dig into the DLN1 rows and get the list of items. However, serial numbers are within the OSRI table (OSRI.IntrSerial).
How can I "bridge" DLN1 with OSRI? Or, how do I get all serial numbers related to an item of a delivery note in "simple SQL selects"?Hi Vieri.
You have to link to table SRI1 where saves the transactions you made with transactional documents where includes items with serial numbers. The query could be as follows:
SELECT ODLN.DOCDATE, ODLN.DOCNUM, OSRI.SUPPSERIAL FROM OSRI
JOIN SRI1 ON (SRI1.SYSSERIAL = OSRI.SYSSERIAL)
JOIN ODLN ON (ODLN.DOCENTRY = SRI1.BASEENTRY)
JOIN DLN1 ON (DLN1.ITEMCODE = OSRI.ITEMCODE)
WHERE ODLN.DOCENTRY = 5
ORDER BY ODLN.DOCDATE DESC
I don´t know by the moment if via SDK you can read this information.
I hope it helps.
Best regards.
Rafael Monge.
SAP Business One development consultant. -
New 9XX movement and Serial Numbers
Greetings,
I have created two new movements (901/902) copies of 561/562, these are inventory correction movements and I have changed very little on the actual movement type configuration other then some of the G/L account mapping. The inventory that will be corrected with these movements can be serialized and so has a serial profiles in MM, I'd like to have these new movement types to not require serial numbers at all as they may not be available and business requirement does need them. In the "Define Serialization Attributes for Movement Types" secition of Serial Management config I have changed the serial usage to 01 'None' however when I do the movement in MB11 a serial is still required. Any ideas?
Thanks,
JoeHi,
If you have set in Define Serialization Attributes for Movement Types" secition of Serial Management config to 01 'None', you should not get this error. This should be against your new movement type 9XX.
Also, check in the serial number profile, if you have set the stock check indicator to 1. Let me know if it helps.
Regards
Hari
Maybe you are looking for
-
Why do PDFs no longer appear in Firefox after registering CS6 in MacOS?
I have a 2-year-old MacBook Pro with (I think Mountain Lion (MacOS X 10.8.1). I have Creative Suite Design Premium installed. I went to buy Creative Suite Web & Design Premium CS6. While I waited for it to arrive, I installed the demo, and when my pa
-
Differrences between structure and table in data dictionary in ABAP?
What is the differrences between structure and table in data dictionary in ABAP? are they same?
-
How to specify a custom User-Agent for an HTTPService call?
I'm trying to have HTTPService send a custom User-Agent string in the request headers but it seems to ignore the header="" method. Is there any documentation on how to do this? Or would I have to use URLRequest instead?
-
Ciscoworks unable to collect config in RME due to firewall?
My CW is unable to collect the config in RME I'm using CDP, OSPF, and BGP for discovery.. I udnerstand that CW use snmp read community string to discover network devices. I can see CW pick up the devices in the device management list, but when I do a
-
Biometric solution in apex oracle
Hello Sir, I want to access bio metricc feature in Apex application . How can be use it and do any connectivity or through any procedure . hw can we attached biometric system to apex oracle application . Plz give me any solution . Thanx