Batches not visible in MMBE

Hi Gurus,
The system is GO LIVED in January, so when i run MMBE, the system should display all the batches ( even the batches which dont have stock ), when i select " No zero line stock" . But system is missing few batches. But when i select material movements at plant level, all the batches are displayed. Please advice what would have gone wrong.
regards
Kaisar

Hi
If the system is missing some batches means, there is some isolation of some batches based on some cretiria. Hence compare the selected batch characteristics and missed batch characteristics. You may get some idea
krishna

Similar Messages

Batch not appearing in MMBE but determined in the DELIVERY

Dear All,
While creating delivery, batch got determined, but actually batch not shown in MMBE.
When I checked in MSC3N, it shows that particular Batch, it has been created about 2 years back.
But how system is taking this Batch when there is no stock and it is not shown in MMBE.
Please explain.
Regards,
Mullairaja

Hi Harry,
Thanks for your suggestion.
I will check and confirm you.
Regards,
Mullairaja

Batch not updating while creating delivery using bapi

Hi
I have used following bapi to create delivery BAPI_DELIVERYPROCESSING_EXEC and passed the following parameters into bapi
lt_request-document_type = 'A'.
        lt_request-document_numb = deltab-vbeln.
        lt_request-document_item = deltab-posnr.
        lt_request-batch        = deltab-charg.
        lt_request-material = deltab-matnr.
        lt_request-plant = '3200'.
        lt_request-quantity_base__uom = deltab-kwmeng.
        lt_request-delivery_date = sy-datum.
CALL FUNCTION 'BAPI_DELIVERYPROCESSING_EXEC'
EXPORTING
DELIVERY_EXTEND =
TECHN_CONTROL =
      TABLES
      request = lt_request
      createditems = lt_createditems
      return = lt_return.
here i am able to create delivery successfully but the batch which i passed in bapi is not getting updated in vl02n to do PGI.
again i need to go to vl02n and give batch and quanitty manually to do PGI.is there anyway that batch gets updated in vl02n also.
Regards,
Venkat.

Hi
My answer is pure assumption.
Please check the following OSS notes
Note 758810 - BAPI_PO_CHANGE vendor batch and batch not visible
Note 1230268 - Field Vendor Batch never filled for PO BAPIs
Please take help from BASIS and SAP, before implementing the OSS note
Regards
Madhan D

Email Address not visible for output device MAIL in created batch job

Issue in ECC6.0: Email Address not visible to display/change for output device MAIL in print parameter of each step in the created batch job.
User wants to periodically receive report file via send to his email, so I create the batch job running report and send the report in pdf file to his email.
Detail in the batch job
1) In print parameter screen of the step in the batch job
-Using output device MAIL (output type ZPDF1)
-inputting email address of receiver in the EMAIL ADDRESS field
2) After the batch job was saved, I tried to display/change the field EMAIL ADDRESS via Tx. SM37, but this field is invisible. The field can not be displayed or changed anymore. I also tried in SM36, but it is for creating new batch job, not changing the existing batch job.
4) User receives email with pdf file from the batch job.
How to change/display the email address of the receiver in the created batch job?
Note that we just changed to use SAP ECC6 from SAP 4.6c. In SAP 4.6c, we can change/display the
Email Address Field via Tx. SM37.
Pls kindly suggest, thank you very much in advance.

Hi Srirompoti,
After saving the job if the job has not started then you can follow the below steps to change the Email address.
1. View the job from Txn SM37.
2. check the check box for your job that you want to change and goto menu path "Job->change
3. in the next screen goto "Edit->steps." or press "F6" key
4. place the coursor on the job and goto menu path "Step->change->print specifications.
5. here you can change the email address.
If you are not able change the data then you might not have authorization.

Batch is not captured in MMBE as Schd. for Delivery?

Hi SD Experts
Particular batch stock is not captured in MMBE as scheduled for delivery after creating the Outbound delivery.
Kindly provide some inputs.
Thanks/Karthik

Hi
Thanks for your inputs
I have tried my best but nothing worked out.
Development it is working fine and even production system for the same material other batches or working fine.
Compared the batches but nothing wrong in it.
Due to this issue batch stock is showing as available stock for other deliveries to pick.
Planning to apply OSS notes.
Thanks/Karthik

Reservation not visible in MD04 but visible in MMBE

Hi Everyone,
I am facing a problem . Reservations of materials are visible in the Tcode MMBE but those reservations are not visible in Tcode MD04.
Please help me in this
Thanks
Bijay Prasad

Dear ,
In SAP Txn : MD04-there is always theree entreis : Plant /Material and With Filter Check box.If you hit the With Filter Check box , u will find Display Filter and Selection Rule is appearing as a menu bar .
Now , for a test case , provide one material and plant code , mark with filter , Select only SAP Requiremet and Stock both Display Filter and Selection Rule , press entre ,MD04 will display Stocks as well all the Reservation Number as Ord.Reservation (both manullay generated or automatically generted) .
In case , if it is not displaying , then investigate goto -SPRO-MRP-Evalution -Filter -Define Selection Rule -Select the SAP00002
-SAP Requirement and Stocks -Goto Details -Check wether Reservation is set to "Do not consider " .It should be set in " Display availability relevence " .Other filter screen like SAP00001-only for Reciepts .
Check this and come back
Regards
JH

Casio Exilium Camera Video not visible in I-Movie 08

Hi,
I had created a number of movies with footage from my casio digital camera and my sony video camera.
Now with IMovie '08 the clips from my Casio camera (.avi files) are not visible. I tried opening the clips with QT and saving as .mov files but they were still not visible.
I have hundreds of clips that I would like to use with Imovie 08. Please help!

How do I convert with ITunes or QT Pro?
In QT Pro, open your file in a player. Select the "Export to Web > Desktop", "Export > Movie to Apple TV", "Export > Movie to DV Stream", "Export > Movie to iPod", "Export > Movie to MPEG-4", or "Export > Movie to QuickTime Movie" using AIC, DV, H.264, Motion JPEG, MPEG-4 Video, or Photo JPEG with either Linear PCM or AAC audio.
To use iTunes, you first have to place the content into an MOV file container using either the QT Pro, MPEG Streamclip, or similar media player/converter's "Save As..." File menu option. Once in the MOV container, drop the file to your iTunes Library, select it, use the "Convert Selection to iPod" or "Convert Selection to Apple TV" Advanced menu option, and import the converted file to iMovie '08. (QT Pro and MPEG Streamclip are both quicker and more direct.)
I have not done that before. Can you do it in bulk?
iTunes converts one file at a time. QT Pro does not allow batch processing but will allow you to convert multiple files simultaneously. MPEG Streamclip allows batch processing. iSquint probably has the easiest to use batch processor but like GarageBand and iTunes, it requires the AVI content to be placed into an MOV container first.

External hard drive not visible in disk utility or finder

Hi all,
I have had a good look through previous discussions and I can't seem to find an issue relevant to mine.
My external hard drive has 2 partitions (1 time machine back up, 1 general hard drive). The issue is that the HD is running when it is plugged in however it is not visible in either disk utility or finder.
I am running OS X 10.10 (Yosemite) on a 2010 MacBook Pro. I also have parallels desktop running windows 7. When I boot windows and plug in the HD I usually get the option to mount the HD to either OS X or Windows. With this issue the option window appears for a split second (not enough time to select either) and then disappears. It seems that the HD may be ejecting itself as soon as it is registered by the computer. I have tried using a different power cable for the HD and also a different usb cable, this doesn't help.
The external HD is a Samsung D3 Station, which i have had for 6 months now and never had an issue with.
Any help is appreciated
Thanks,
Bruce

An update for anyone who can help me:
I have tried the external hard drive in other computers (mac and windows), each time I get the same problem above.
I have removed the HD from the enclosure and purchased a docking station for it (3.5" SATA). When I plug it in to the laptop it disconnects itself straight away before it is visible. With the windows computers it installs the drivers and says that the device is ready to use, then disconnects before it shows up.
As the HD is not visible there is no option to re-format or anything.
This is very frustrating as I was using the HD with no issues and it randomly disconnected and I have not been able to access since.
Thanks in advance for any help.
Bruce

Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1 - which is what introduced the bugs.

Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1 - which is what introduced the bugs.
The only thing that I can think of that might be causing the issues that I have a Mac Mini on Mavericks.
Dave

Hi
I have discovered that my question above is a non-question. A user triggered by looking at the below article about Illustrator 2014 cc 17.0.2
http://helpx.adobe.com/illustrator/release-note/illustrator-17-0-2-release-notes.html
He had recently upgraded from wht we now know is 18.0 to 18.1 which is the latest version. He read the above artic
le and supposed that it was a bug fix release for his version - because the v17 ov18 number is not often displayed. It is usually just 2014 CC.
I have asked him to post a bug report about Adobe Illustrator CC 2014.1
Dave

IDOC not visible in IR but metadata successfully imported

Hi,
I have this wiered issue.
I want to import IDOC WPUSKR01 (cashier productivity) from BI.
But when I connect to BI system from IR to import Idoc structure, this IDOC is not visible.
But I can manually import the metadata from BI in idx2.
Now how to import this in IR?
I have imported other Idocs (like WPUBON) before and did the scenario successfully for BI.
Regards,
Anirudh Vyas.

Hi,
In BI Tcode we82 I have manually added the entries for WPUKSR01. Now Idoc is visible when importing in IR.
I have checked all the segments in we31, they are all released.
But it gives error:
Error: IDoc type WPUKSR01 contains errors (unable to read segments)
Then, I checked in R/3, there also WPUKSR01 was not there in we82. I manually added there and I was successfully able to import it in IR.
But the same thing is failing in BI. I have SAPALL permissions in all the systems.
Can I use Idoc imported from R/3 in scenario for BI?
regards,
Anirudh.

How can I add a device to my library? My e-reader is registered but not visible.

Hello,
I use a Tolino Shine and can download E-Books via WLAN directly to it. I can also download the books to my netbook. However, when I plug the Tolino into my netbook it is not visible in the Adobe library and I cannot move books from the library to the Tolino.
I tried to reset the Tolino to the manufacturer settings. This did not improve the situation.
Any suggestions?
Thanks a lot!

http://www.apple.com/icloud/find-my-iphone.html
any chance of it working on non-apple phones?
No, it requires the operating system iOS, only available on Apple Devices.

Reporting Flag is not visible in the manage screen

Hi BI Experts, Good morning.
We load the inventory data daily in the night time which is delta load.
5 days back, we got 0 records and the request is in red.Then i rerun the infopackage manually and got the total records in to the cube.
From that day onwards its running successfully.
Yesterday i deleted the bad request from infocube.
But the Reporting flag is not visible.
Today i didnot get the records.
Please can anyone tell me the process.
Thanks in advance.
Regards
Anjali

Hi Nagesh,
Still i am not getting reporting flag.
I tried what did u say.
And today i did not get the records. Infopackages didnot run. It shows in red.
I tried to run it manually but it gives error.
The error message is:
Short text
    An exception occurred that was not caught.
What happened?
    The exception 'CX_RSR_X_MESSAGE' was raised, but it was not caught anywhere
     along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program 'SAPLRRMS' has to be
    terminated.
Please give me the reply.
Thanks in advance
Regards
Anjali

Drop down boxes do not show up. My tabs are not visible. I could barely see the box to type in this question. Something is off. I deleted and reinstalled program it is still just floating words. I work on a Mac with ox 10.6.8

The browser boxes, tabs, and links do not show up with the needed outlines, colors, and shapes. This box I am typing in was barely visible. Above this box is a set of two verticle parallel bars. When I moused over it, I saw it was for inserting a link, but if I had not been curious I would not have known what those lines were for. When I look at this page on PC I have a colored blue backdrop. It is not visible on the Mac. The search box does not have the image of the magnifying class and the arrow does not show up where it should be. The words Post Question just appear below the statement we have made some educated guesses about your browser. I thought maybe it had been a theme that was applied, but I do not see how it could have come on when I trashed the old version of the firefox.

A;though the CSS is very well documented, there are those that ignore those signs. Look at the following
/* Menu item containers, position children relative to this container and are a fixed width */
ul.MenuBarHorizontal li
    margin: 0;
    padding: 0;
    list-style-type: none;
    font-size: 100%;
    position: relative;
    text-align: left;
    cursor: pointer;
    width: auto;
    float: left;
The rest have been given a width of 15em, so this value may be a good start.
DESIGN INFORMATION: describes color scheme, borders, fonts
/* Submenu containers have borders on all sides */
ul.MenuBarHorizontal ul
    border: 1px solid #CCC;
   width: auto;
    background-attachment: fixed;
Just keep the border property and remove the other two.
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarHorizontal iframe
    position: absolute;
    z-index: 1010;
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
ul.MenuBarHorizontal li.MenuBarItemIE
          display: inline;
          f\loat: left;
          background: #FFF;
The following is the original for the above
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarHorizontal iframe
    position: absolute;
    z-index: 1010;
    filter:alpha(opacity:0.1);
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
    ul.MenuBarHorizontal li.MenuBarItemIE
        display: inline;
        f\loat: left;
        background: #FFF;
Cheers,
Gramps

Data loaded in Infocube is not visible in the Reporting

Hi all,
In the info cube, the data is not visible for reporting, How can i make it available for reporting,
When i select the Manage option from the context menu of the cube and select the Requests Tab, i get a pop up message that tells
" There is an inconsistency between the load status of the data and the option of reporting on this data.
There is data in the InfoCube/ODS object that is OK from a quality point of view, but is not yet displayed in reporting.
The problem, for example, is to do with request 0000018049, number REQU_F4ZBFRMDGBULE9WCUN3R5UX5X."
How do i find out the inconsistancies?
PS: All the requesta are delta upload
There is no aggregates for this cube.
Thanks n regards
Girikumar

Hi Girikumar
Use the RSRV transaction and select All Elementary Tests in the dropdown ->Transaction data , select the Consistency of the Time Dimension for an InfoCube and select your cube and Execute the button ..if any error are there it will display the inconsistency ..Repair the Inconsistency with Correct Button..
Check the other test also ..
Hope the above helps you..\
Bye
Shu Moh..

I updated win7 and now I cant see ff. I have reinstalled it 5 times now. It shows it is running in task manager but it is not visible on the desk top.

I installed win7 ultimate and then ff. ff worked fine until I installed win7 service pack 1 and all the other updates it recommended. I click to open ff and nothing happens. I look in task manager and it shows it is running. It is not visible on the screen or in the task bar. I have reinstalled a fresh download of it 5 times. I even tried the beta version but still the same problem. I can use explorer and chrome ok but not ff.

The "System Tray" is located at the very bottom right of your screen and is a list of most/all running applications that will show in this list.
For your SysFader issue, this "may" be the problem:
1 Find the "My Computer" desktop icon and right-click it. A pull-down menu will appear. Select "Properties."
2 Click on the "Advanced" tab. This will load a new page of options.
3 Select the "Visual Effects" tab at the top of the window and deselect "Animate Windows when minimizing and maximizing," "Fade or slide menus into view," "Fade or slide Tool Tips into view" and "Fade out Menu items after checking."
4 Click "OK." This will remove most if not all of the Sysfader effects, at the same time correcting related errors that used to come up during opening a new file or program.

Batches not visible in MMBE

Similar Messages

Maybe you are looking for