Batches That Require Conversion
Hello, there.
I have an important urgent question ...
Does anyone know what is the name of the program (or transaction code) that is used to check which batches require conversion(=transfer posting 'material to material') when changing the batch level (from material to plant).
Thanks in advance.
When you change the batch level from 'Plant' to 'Material' or 'Client' using the RM07CHDX standard report.
The system does not convert the change documents for the batch. For this please use the below note -
Note 750319 - Batch level conversion report - change documents for batch.
Hope this helps you.
Similar Messages
-
Note 533276 - Setting the batch management requirement indicator
Hi;
we have found an oss note for setting the batch management requirement
indicator.. but the program mentioned in oss note does't exist in the
attachement part.. we urgently need your help..
how can we find program RVBCONVMAT2BM?
Note 533276 - Setting the batch management requirement indicator
Solution
Here, the standard procedure is to clear stocks of the current and the previous period as well as to complete the open documents. Note 30656 provides further information about this.
Alternatively, in the case of a large data or document volume, you can use a conversion report from the batch development that sets the batch management requirement indicator without the necessity of manual preliminary works such as the posting of the stocks or the completion of open documents.
We have developed the main features of this report, but it must be adjusted to individual business processes in a customer project that is subject to charges.
If you require further information about functions of this tool or about running such a customer project, you can send an e-mail to the consulting department ([email protected]).Hi,
You also need to check for open sales order, open production orders, open WM transfer orders and open deliveries. These documents needs to be closed/completed.
Check OSS notes 533276 - Setting the batch management requirement indicator.
Following is the details of this notes;
Summary
Symptom
The attempt to set the batch management requirement indicator for a
material in the material master record maintenance fails because there are
stocks or documents that are not completed such as production orders, sales
orders, deliveries or WM transfer orders.
More Terms
MARA-XCHPF, MARC-XCHPF, RVBCONVMAT2BM
Cause and Prerequisites
Solution
Here, the standard procedure is to clear stocks of the current and the
previous period as well as to complete the open documents. Note 30656
provides further information about this.
Alternatively, in the case of a large data or document volume, you can use
a conversion report from the batch development that sets the batch
management requirement indicator without the necessity of manual
preliminary works such as the posting of the stocks or the completion of
open documents.
We have developed the main features of this report, but it must be adjusted
to individual business processes in a customer project that is subject to
charges.
If you require further information about functions of this tool or about
running such a customer project, you can send an e-mail to the consulting
department (BMToolsatsap.com).
Regards, -
Batch management requirement indicator
Dear experts,
Due to an error during test-conversion, I have a number of materials that should have gotten the Batch management requirement indicator. At this moment the system does not allow me to change this indicator, because it detects stockpostings.
Since it is an inactive client I have the possibility to change whatever is needed, so I removed the stock. But apparantly this is not enough.
Does anyone know a way to enforce the Batch management requirement indicator?
Thanks for your help!
Best regards, AJHi,
You also need to check for open sales order, open production orders, open WM transfer orders and open deliveries. These documents needs to be closed/completed.
Check OSS notes 533276 - Setting the batch management requirement indicator.
Following is the details of this notes;
Summary
Symptom
The attempt to set the batch management requirement indicator for a
material in the material master record maintenance fails because there are
stocks or documents that are not completed such as production orders, sales
orders, deliveries or WM transfer orders.
More Terms
MARA-XCHPF, MARC-XCHPF, RVBCONVMAT2BM
Cause and Prerequisites
Solution
Here, the standard procedure is to clear stocks of the current and the
previous period as well as to complete the open documents. Note 30656
provides further information about this.
Alternatively, in the case of a large data or document volume, you can use
a conversion report from the batch development that sets the batch
management requirement indicator without the necessity of manual
preliminary works such as the posting of the stocks or the completion of
open documents.
We have developed the main features of this report, but it must be adjusted
to individual business processes in a customer project that is subject to
charges.
If you require further information about functions of this tool or about
running such a customer project, you can send an e-mail to the consulting
department (BMToolsatsap.com).
Regards, -
Assignment of a batch is required
Hi All ,
I am having problem while doing UD in QA32. It gives Error like ' Assignment of a batch is required '. As there is no batch selected for particular material. And Inspection lot is already conform in production order.
How can i remove batch from quality.
Thnxs & Regards,
Swapnil VaidyaDear Swapnil
Hope you are using Ecc 6.
For 03 lots which requires batch assignment while giving UD you have to give it through Tcode QA40. There is an option in this Tcode where in you can tick UD when Batch Assignement is missing . This will make sure that the UD is given to the batch assignment lots
If you need this feature to be made available for QA11 you have to implement the Note 146945 - Making usage decision for production lots w/o batch
but only issue will be that inpection lots without batch assignment might not be taken into account sufficiently or at all in the subsequent QM functions (in certificate processing, QMIS, results history - for example).
Regards
Gajesh -
We have a free downloadable gaming service that requires flash player in order to operate properly.
I am trying to figure our how can I make users who don't have flash to download it, but I don't want these users to leave my service and start a different download flow in a different website (adobe's) .
I thought about several different options but don't know what would be considered legal or legit:
1. download flash along with my product- this means I will have to add another offer screen to my installation? if so, it will damage my conversion.
2. downloading flash for the user without consent- probably will result with AV alerts
3. open an iframe for users who don't have flash where I'll ask users to download flash--> that still will redirect users to adobe website to complete the process, which will damage my usage...
any comments on the above or additional ideas?
Thanks
TomUnfortunately, I don't think that our license currently grants the rights that you're looking for. We do allow for the inclusion of original installers on physical media to address the situation of installation where an Internet connection is not guaranteed to be available; however, the Adobe download center serves an important role in the cost-recovery efforts for the continued development, maintenance and distribution of Flash Player, which is a tremendously expensive undertaking. I think it's unlikely that we would agree to allow the inclusion of Flash Player installers in scenarios where the host installer requires an internet connection.
Here is a brief summary of the rights granted by this license:
Licensee is permitted to distribute Adobe Web Players to multiple clients in a closed intranet environment.
Licensee is permitted to distribute Adobe Web Players to multiple end-users by including the Player installers on CDs, DVDs or other physical media.
Usage of Adobe Web Players is only permitted for supported platforms; usage rights on non-PC devices or embedded systems are not granted by this license.
Licensee must use the installers as-is without modification.
Licensees, at their discretion, are entitled to display the Flash Enabled and/or Shockwave logos on products or intranet sites according to the Style Guide.
On the plus side, you don't have to worry about serving your users outdated or vulnerable Flash Player versions, and keeping those embedded copies constantly updated would be a lot of overhead.
Chrome and Internet Explorer on Win8+ always have Flash Player built-in, so those users are generally going to be in good shape (and you shouldn't redirect them to the download anyway, because we'll just give them a message about it already being installed). IE11 eliminates JavaScript support for conditional comments and various other methods for fingerprinting and targeting IE with IE-specific logic, so you'll want to pay attention to that experience, particularly on Win8+ (i.e. your detection logic might need to be tweaked on this config, if it's depending on isMSIE to do the correct thing... there is a lot of busted Flash detection in the world on this target at the moment...)
For NPAPI browsers (Safari, Firefox), users are going to have to close the browser to complete the install process, so I don't think that offering the download in an iframe is going to buy you much, and would probably make it more difficult to complete the installation steps, ultimately doing more harm than good.
In the case of Safari, the installer re-launches Safari at the end of the installation process, and it does so without reopening all of the previously opened tabs. I'm hoping that we won't have to live with that issue much longer, but I want to be transparent about the impact to your user experience. Safari users are going to lose the tab with your site in it during the installation process no matter what.
There's also an install mechanism called Express Install, which you can invoke automatically when you detect that Flash Player is not installed, or is below the version that you require. Off the top of my head, I don't know exactly what happens in every possible install scenario (patch update vs. feature update, by OS and browser). I think some configs require you to restart and others like IE on Windows don't. It's all dictated by browser limitations, which are constantly moving targets.
In short, we recommend that everyone use SWFObject2 for detecting Flash from JavaScript, and they make it pretty easy to invoke upgrades via ExpressInstall.
SWFObject: Javascript Flash Player detection and embed script | deconcept -
Updating apps that require a newer version of IOS
I've decided to hold of on updating my iPad until the WiFi/4.2.1 issues are worked out. Since then I've ran into an issue with two apps that required 4.2 or higher. No big deal there. They download then don't install, and when I connect to iTunes, it says my IOS needs to be updated for the app.
My question is when you go into the update page of the App Store on the iPad, does it only show updates in which you are able to install the update on your running version of IOS? I was hoping it would allow me to "click" the app that it says there is an update for, but that doesn't work. So far I've searched for the app again to check it's requirements. Works but time-consuming.
Basically, I don't want to update something then it go "this version requires a newer IOS." and then it just leave me without my app. I'm not sure if that's how it would behave, but I don't want something to happen with one of the apps I use regularly.
Any advice would be greatly appreciated.Here's the thing... I work in IT. There's a reason why a good admin doesn't turn on "Automatic Updates" because sometimes updates don't work. Perhaps the issues with WiFi are only a batch of iPads, perhaps it's only with certain routers, or perhaps it's trolls. I don't know... but until I'm satisfied with the results people are getting with the update OR I have no choice, I'm not updating. There's no dishonor in waiting for a patch if it is not critical and you can get by without it for the time being. Right now, there's too much uncertainty for me to make my iPad an expensive way to play Angry Birds. If I can't connect to the Internet with it, it's not very useful to me.
If and when an app needs an update that doesn't work with 3.2.2, it just won't get updated. If I get to that point where I have to update, I'll cross my fingers and go for it.
That said, if someone has an answer to my question about the apps and their behavior in the Update portion of the App Store, that would be great. -
Dear All,
My senerio is this : -
(1) I am creating delivery with batch split ...
(2) Sometimes inspection lot created with batch assignment & I am able to record the result & UD but some times system made inspection lot with full delivery qty and when I am tried to record the result system given an error for "batch assignment required" . I am not able to understand why some system do other procedure & some time do other...
Can anyone help me out...Is this an outgoing delivery, inspection type 10? If so, the inspection lot is created when the delivery is created. So the lot will be sitting out there with the status BREQ, batch required. You must be using a batch managed material.
Untill a delivery is fully picked, the batch number is not assigned to the inspection lot. I believe this is the difference you are seeing. In some cases, SD might assign the batches either directly in the sales order, (which transfers to the delivery), or they assign them in delivery before the lab does the testing. You might also have automatic batch selection which might pick the batches in some cases, but in other cases no batches are found and it requires a manual intervention to select batches.
In other cases, if shipping hasn't yet completed the SAP transactions to assign the batches to the delivery before the lab completes testing, you'll get the error you are seeing. In some busineses they test the batches before making the assignment so they don't have to unpick the delivery if a particular batch fails testing. Doing that, means the lab has to wait to record the results until later, after SD finishes picking the delivery.
FF -
Error Message: Sorry, a serious error has occurred that requires Adobe Premier Pro to shut down.
Hi. I'm having another serious problem with CS4 (the version that comes with CS5 when you don't have 64 bit capability. I just finished a project, had saved it, and then had switched over to Adobe Encoder to create a finished flash video (which worked perfectly). I shut down CS4, went home, tried to restart the main project to create a video from the same project (wanted to make an mpeg version as well) and got the following error message:
Sorry, a serious error has occurred that requires Adobe Premier Pro to shut down. We will attempt to save your current project. Then the system shuts down.
Not only can I not open the project I was working on, I cannot open any of my prior projects without receiving the same error.
Does anyone have any idea what may be causing this issue and how to resolve it?
Thanks in advance for any suggestions.
By the way, is everyone else having the same amount of problems with this software? I've never had any software that has had so many problems from the beginning. My opinion of this software and Adobe in general has gone down substantially.Not enough information for anyone to even make a guess
Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link -
Hi. My itunes library is in current 10.5.2 but my old ipod touch 4th or 3rd gen is not updating at all its still in current 4.2 and there is some apps i cant download that requires a 4.3 update but in my itunes it wont. Please help!
Are you sure you have a 4g/3g iPod? If you don't have a camera, it's definitely not 4G. If it has no camera and is 8 or 16 Gb it is a 2G and can't go beyond 4.2.1.
-
I want to install an app that requires iOS 5 update. How do I update the software on my phone when I do not have the icon in settings for update software? Please help!
Connect your iPhone to iTunes, and find Software Update in the main interface pane. It should prompt you to install iOS 5.1.1.
-
when i go to a website that requires a security code be typed in, the web site appears but the security code to be typed in is blank, however it works fine with Internet Explorer
See:
* http://kb.mozillazine.org/Images_or_animations_do_not_load
* You can see the permissions for the domain in the current tab in Tools > Page Info > Permissions
* You can see image settings in Tools > Options > Content: Load Images
* You can see all exceptions in Tools > Options > Content: Load Images > Exceptions
* You can check the Tools > Page Info > Media tab for blocked images (scroll through all the images)
Some security software and extensions also can block images.
See:
* [[Troubleshooting extensions and themes]] -
My ipod touch is all of a sudden not letting me do anything that requires using my password. I can't buy anything and I can't check my purchases. Every time I put in my password I get an error message and it says try again later. This has been happening for 4 days now. I can play my existing games just fine. I can access my itunes store through the internet just fine with my password, but just not on my ipod touch. I sent an email to the itunes support store 3 days ago and have not heard back from them. Does anybody have any suggestions on why this is happening all of a sudden after having the ipod for almost 2 years?
Something you can try is resetting it all Settings > General > Reset > Reset all settings. Or go to Settings > Store & sign out & log back in. Another thing you can do is restore your ipod. This has happened to me but the only thing i did was that i created a new account but try doing the things above i just told you. :)
-
I have uninstalled and reinstalled FF several times. When I try to install the extension (that requires FF 4.0), I get a pop-up that says I am still using an older version of FF and asks if I want to upgrade. When I click on "About Firefox", it says I have 4.0. In February, I downloaded FF Beta which I understand could be a problem. I also have read that you need to manually delete Beta files which I have done. I did a system search to see if any Beta files exist and no further files were found. I just want to make sure FF 4.0 is installed and be able to install the FGS extension.
Thank you, cor-el, for your reply. I clicked on the link you provided, and it took me to Create a New Article. I'm assuming an article already exists for this. Can you instruct me on how to view this article. This is the first time I have ever had to refer to Mozilla Help. I have tried to do this on my own, but am having difficulty. Thanks for your help.
-
I am trying to use a website that requires that my computer have the latest version of Java, which I have updated and installed Java 7 Update 51 (64-bit), however Firefox does not recognize that I even have Java on my computer. My computer is 64-bit
When I run "Verify Java Version" it show nothing is installed... but it is, I know that for a fact because it shows in my "Control Panel/Programs/Programs and Features".
When I go back to the Java Download page, the following message is visible:
"We have detected you may be viewing this page in a 32-bit browser. If you use 32-bit and 64-bit browsers interchangeably, you will need to install both 32-bit and 64-bit Java in order to have the Java plug-in for both browsers."
My question is this:
Is there a way to change my Firefox browser from 32-bit to 64-bit.... because it appears that this is way Java is not functioning properly?Firefox needs 32-bit plugins, so you'll need to install 32-bit Java for Firefox.
No, you can't change Firefox from 32-bt to 64-bit. There is a Nightly 64-bit version (alpha) of Firefox, but it is used only to test for regressions until development is resumed. -
My ipod 5th gen says it is connected to the internet and i can go on apps that require an internet connection but whe i try to use the weather or another app that uses your current location it cant find me???
If you open the Maps app where does that say you are located?
For location the iPod uses the location of nearby routers that are in Apple's database of routers and their location. Thus it appears that Apple's database is incorrect. You do not have to be connected to the router, just within range.
Apple periodically updates their database based on information they obtain from iPhones, The iPhone has to have turned on the option to send info to Apple. no one has found another way to get the location of a router added/corrected.
You can confirm that by going to well-know place with wifi like Starbucks or McDonalds
Maybe you are looking for
-
One iTunes account for family or each their own?
My 16 year old daughter has an iPhone 4; I just got a 5. I have an iTunes account and have enabled home sharing. Should she have her own account or is one sufficient for us both? Recommendations, Please and thanks!
-
From RFC 2068 Error while testing ADF Application in Weblogic Server
Hi All, Created an ADF application and Deployed this application to Weblogic server. I am getting the below error After deploy into weblogic server while running the application I am able to run this application well in JDeveloper using the Integrate
-
Problems with special characters like "u00F6" "u00E4" "u00FC"
Hi, we currently face some major problems with special characters like "ö" "ä" "ü". First I thought it is a SP02 specific problem but it still doesn't work with SP03. When I start an import the import manager shows correct converted value. "ö"s "ä"s
-
Lead Time Calculation in SNP Heuristics
Dear All, Please let me know how the lead times are determined in SNP heuristics? Ex: Distribution Center to Production Plant and Production Plant to Supplier. Thx, Ram.
-
My list of songs and videos appear on my Ipod classic but they won't play
all of my songs appear on my Ipod but they will not play anymore after trying to move them to a new PC. I get 0:00 when I press play but it won't progress