BatchModel - 10 loops and save test report after each loop completes

Greetings Everyone,
     We are using TestStand 2010 and presently using the BatchModel.seq for a quantity of four (4) UUTs in a Burn-In configuration.  The Client sequence loops ten (10) times.  I am wondering if there is a way to save the test data report at the end of each loop and create another one for each of the loops after that.  Is this possible or am I asking too much from the TestStand software?  Thank you in advance for your responses to this latest post.
Regards,
Scott
Solved!
Go to Solution.

Hi Doug,
     Thank you for the reply.
     I will discuss these with my co-worker whom had a hand in the development of this client file.  This client file was developed mostly by a contractor who works for our customer.  These options sound like they will do the trick.  The client file is used for Burn-In, so there are three levels of testing at three different temperature levels.  We are trying to track down some possible bugs in this contractor's code in which the client file crashes and all data is lost.  This will at least give us some options of collecting the data in a fashion that we shouldn't have to worry if there is an error during the process and at least retain some of the data.  Thank you for your reply and if there is anything else we have trouble with I will post again.
Regards,
Scott

Similar Messages

  • Time stamp and skip test report

    Hello, all
    I am new to teststand and just beginning to do some work with teststand.
    My interest is to report every step with data begin with a time stamp.
    I create  subtest in the Numeric type property to report timestamp in the form of YYYY-MM-DD-HH-mm-ss
    These substep are pre-step and post-step and in pre-step I get timestamp at the beginning and
    post step I get a timestamp at the ens of the step.
    Thing workout pretty well until I report a skip test.
    A skip step does not run so a pre-step and post-step report a time stamp as 00000000000000.
    how can I over come this problem since i want the skip test report as exact the same with "Normal Step"
    is there any way to have a f(x) at the beginning and the end of the step type, and theses f(x) of course
    should be execute even that step is skipped
    Thanks
    TP
    Solved!
    Go to Solution.

     Hello
    For me that is important and for many thing I do the step carried out take a longtime than normal, especial if you test with around 20 socket and more.
    I am surprised that a step type does not have some thing reserved for Pre-execution.  This can help condition further a costumed step.
    The only way I can poke in there may be using "precondition" to put my time stamp.  But that mean my costumed model leaves a bunch of f(x) in there and look ugly

  • How to export and save a report at server or a remote machine?

    Hi,
    We have our BOE server XI R2 installed in Solaris SPARC machine. I would like to export the report to Word and then save it in a remote/another machine. Presently our application is showing a save as dialog to client. Instead we want it to be saved in a specific machine.
    Thanks

    Hi   Bhave  ,
    Thanks for taking sometime to clear our doubt.
    We were trying the solution your solution but still we had been thrown the save as dialog.
    Let me clearly state the problem which we are facing.
    Presently we are able to redirect user to BO server which in turn shows  a save as dialog in client's machine. What we are trying to do is to run report at specific time---> exporting to word -
    > saving it on a particular machine and mail the users location or a url which authenticates and redirects user to the file.
    FYI We have a Business Objects Enterprise(server) XI Release 2 server installed on Solaris.
    Thanks
    Hi Bhave ,
    We tried the code you have specified. There was some problem with Business Objects server. On solving the same your code works well.
    We are able to save file in RTF format. But when we were trying to convert to PDF and save. RAS server goes down. We dont know the reason.
    And where we will be able to find what are the  responsibilities of all the servers running in BO XI R2.
    Thanks
    Edited by: lnarayanan86 on Aug 13, 2009 11:04 PM

  • How to edit and save a file ( after edit in CS6 in LR)   to keep it in LR collection  where it was?

    I understood that I could select a file from a LR collection, start editing it in LR then pass it to CS6 (I chose the option to make a copy and keep the LR changes) , makes the changes in CS6 and save it from CS6 (Saved it as a PSD file) .Afterwards I can see 2 files (one being the original file,the other the PSD file saved  in CS6  in the original folder of the file, which is fine  ) but the file seems to have disappeared from the LR collection. I am new to LR.

    When you edit in CS6, do you do a "Save" or "Save As..."? You need to do a Save and not a "Save As..." You also can't change the file type from whatever it was when Lightroom created the file.
    Works for me when I do it that way.

  • Save automatically report at each step

    Hello,
    I would like to save the report automitically at EACH step of my sequence file and not at the end of the last step.
    Is there some options in Teststand 3.5, that allows to do this?
    Cheers
    Risotto

    Hi Steve,
    Thank you for your answer.
    I don't know if it will work: the problem I had with Teststand 3.0 was that the report "stay" in the memory until the sequence was finished. And the execution of the sequence last... 3 days. Usually after 10 hours, Teststand crashs because there is no more memory.
    But I will try it.
    Cheers,
    Risotto

  • How do I stop the TX report after each fax, either receiving or sending

    How do I stop tx report after receiving or sending a fax

    Hi raylene0530!
    Welcome to the Canon Forums, and thank you for your inquiry! 
    So that the Community can help you better, we will need to know exactly what Canon equipment you're using, any error messages you're getting, and (if applicable) the Computer Operating System you're using (Windows XP/Vista/7/8 or Mac 10.x), as well as the way you connect to your device (USB or networked via WiFi or Ethernet).
    Any other details you'd like to give will only help the Community better understand your issue!
    Thanks and have a great day!

  • How do I get my controls and indicators to clear after each run of the VI?

    I am using LabVIEW for my Senior Design Project in EET for Purdue University-Indianapolis. After each run of my VI, I want the controls and indicators to go back to their default state (cleared). I don't see an option for this. For example, I have a password VI that allows a user to log in. Once this sub-VI is rerun, the password from the previous user is still there. How do I clear this??? after each run???
    Thanks, D

    Use the property node and invoke node to clear.
    In your block diagram,
    Function Platte.
    >Application Control
    >>Invoke Node
    Then right click the invoke node..
    >From "select VI server class" option
    >>choose "VI"
    Then right click again
    >From "method" option
    >>choose reinitialize all to default
    That will reinitialize all your value to default
    if you want to reinitialize only your password to default then its simple
    right click the invokenode agian
    >From "link to" option
    >>Then link your invoke node to any control or indicators
    I attach one simple file for you
    Hope that will work..
    Saw
    Naing Aye(Maymaythar)
    Attachments:
    reinitialize.vi ‏14 KB

  • Trouble with format of files exported from pages as .doc - when opened on a pc they have extra spaces and pages breaks inserted after each line?  Can be manually deleted, but defeats sharing purpose. advice?

    Hi all, I have trouble with the format of files exported by email as .doc from pages - when opened in MS word on a PC or other device, they have extra spaces and pages inserted after each line - can be deleted manually, but defeats sharing purpose.  Any advice?  Not the most sophisticated user.

    Got it. I tried booting with MOD_AUTOLOAD set to yes, and it was working fine. Looks like I needed to specify some more modules in my list.

  • Old operating systems allowed you to click on recipients when sending emails without adding a comma after each address. Now with the new and improved system, I have to stop and add a comma after each name. How can I avoid this?

    With the new OSX system, whenever I send an email with multiple recipients, I need to physically add a comma after each address. I never needed to do that with all the other older systems, it was done automatically. How can I fix this frustrating glitch?

    option discovered in preferences. Really this and any feature that moves deletes or edits a users data should as far as possible be OFF BY DEFAULT. It shouldn't by default and without the users specific say do this dangerous and unnecessary thing without even letting the user know what it's doing!!! And then cause me a few hours (as i'm new to mac) searching for the option so as to switch it off. If i hadn't noticed the status cage declaring that it was copying files then i might never have twigged that this insane thing was occurring. And if i hadn't of noticed i would have been left maintaining the contents of the folder i copied the files to, the folder which as far as i was informed and so believed was also the location of the music files i was playing. How does Apple justify this 'genius' piece of software non-design? Surely it will hurt no one if this was off by default for new users - overall at least i dare say it would cause a lot less distress in the future for the unsuspecting public at large. Thanks for the support.

  • Test reporting after 8 hours of test in an enviroment​al chamber

    I am trying to think on the best way to report my results.
    Test setup:
    Oven with a profile running for 10 hours. temperature increses and decreses during that time. i have 4 UUTs inside the oven and i comunicate to them. i will just test communications so if theres always communication we are GOOD.
    I have a batch model. i switch to each board i have to talk and validate communications during periods of 4 minutes. then i move up with other UUT. this cycle continues and continues for 10 hours.
    i have it looped like this
    while------oven still running==true
    batch synch
                               My test(VI...PAss Fail)
    batch synch
    end
    So i dont want to have 10 hrs of data.
    in an event of i failure i would like to record the event. and at the end i would like to have just one result. OVERALL TEST PASS.
    i wonder whats the best way to do it.
    what i was thinking is putting and statement after  My test.... that if an error occur to record the failure. if not dont record anything. i think i might be able to change the property fron the statement section or something like that.
    is there another clever way to do it.?
    thanks.
    Solved!
    Go to Solution.

    Hey buton,
    The first three suggestions in this whitepaper will likely be useful to you in your application. Basically, you could use on-the-fly reporting to write your report directly to disk instead of keeping it in memory, and use the "Only Display Latest Results" and "Discard results when not required by the model" to lessen growth of the report in memory.
    To complete your requirements about only seeing failed results, you could configure the report to only show failures by changing the Result FIltering expression in the report options dialog. The "Exclude Passed/Done/Skipped" option should have the desired effect. The finished report will still show the overall UUT status in the header of the report, so you'll be able to see whether the test passed or failed.
    I hope it helps, and let us know if you have any further questions about it!
    Daniel E.
    TestStand Product Support Engineer
    National Instruments

  • SAP BO Report Scheduling and Save as report using Java SDK

    Hi All,
    We have a java product which is integrated with SAP BO using Java SDK and we have certain java screen through which we select report prompt values and webi report gets run.
    Now we want to give a functionality to save report to BO repository.
    When user select certain check box from java screen a separate copy of the webi report should get saved under default folder on BO repository.
    Also, we want user to choose the scheduling option from java screen only (and not the one which we use from BI Launchpad) due to certain access restriction. User does not have access to BI Launchpad. Only he can run report by selecting values through Java screen.
    If i need to create a separate screen for scheduling as well as saving webi report then also i am ok with it.
    P.S. i guess we need to work on Java SDK level. But could somebody please help me with the right direction?
    Let me know in case requirement is not clear.

    Hi Ketan,
    As you are on version BI 4.0 SP5 and would be migrating to BI 4.1, the best SDKs to use would be the Restful Webservices SDKs.
    You have the options to schedule a webi report with prompts as well as the save feature which you require.
    Please refer to the webi restful guides avialble at
    For BI 4.0 SP5
    http://help.sap.com/businessobject/product_guides/boexir4/en/xi4sp5_webi_restful_ws_en.pdf
    For BI 4.1 SP4
    http://help.sap.com/saphelpiis_sbo41sp4wi-sdk/frameset.htm
    Refer to the below blog to understand the Restfull Webservices SDKs.
    http://scn.sap.com/community/restful-sdk/blog/2013/09/07/scripting-web-intelligence-the-restful-raylight-web-services--learing-it
    More blogs on Rest are available at
    http://scn.sap.com/community/restful-sdk/content#filterID=contentstatus%5Bpublished%5D~objecttype~objecttype%5Bblogpost%5D
    You can find the samples from the below link
    http://scn.sap.com/community/restful-sdk/content#filterID=contentstatus%5Bpublished%5D~objecttype~objecttype%5Bdocument%5D
    You would need to refer to the community below in case you have concerns about Rest SDKs.
    http://scn.sap.com/community/restful-sdk
    Thanks,
    Prithvi

  • How to save a chart after each iteration in a for loop?

    Hello,
    I have written code which initializes a spectrometer. Once initialized, if the "Capture" button is pushed, the spectrometer takes a new spectrum three times (see for loop) every second. This spectrum is displayed as a chart in my front panel. My code runs fine...it will update the spectrum every second.
    However, I want to be able to save each of these three iterations as separate graphs. Basically, I want to click "Capture" and have my code save three charts to a specified folder. How do I go about doing this?
    I've attached my VI.
    Thanks.
    Solved!
    Go to Solution.
    Attachments:
    Spectrometer Iteration.vi ‏444 KB

    Use Build Array to make a 2D Array of your X and Y data and use Write To Spreadsheet File to save the data.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Printer always print printing test page after each document

    i purchase HP 5020A ALL-IN-ONE PRINTER J510H
    after instalition compelet ..when i copy document ,always after copy the document print printer test page ?
    This question was solved.
    View Solution.

    The page is an alignment page.  Complete the alignment as shown on page 33 of the user manual here.  After the page is printed it needs to be loaded in the scanner bed and the Start Copy Black button pressed to somplete the alignment.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Green and Orange LEDs blink after each other - what does this mean?

    It won't show up in iTunes, it won't show up in Windows Explorer, and it won't show up in My Computer. Everything else is fine, but it keeps saying "USB Device Not Recognized."
    What should I do?

    If it helps, when I plug the shuffle into the PC, a balloon appears that reads, "USB Device Not Recognized."

  • Persistent crashes with everytime I use Firefox on laptop. No response to multiple reports after each crash

    For weeks Firefox has been crashing at random whether I have opened one site or several. Perhaps the most frequent is while using webmail. It is quite impossible to compose mail using address book. I have been sending reports many times a day without any response from Firefox. I am currently In Costa Rica using secure wifi. There is another computer being used alongside me without any complications.

    thanks, i've only looked at the first three of them, but they are all caused by the norton symantec security product you're using. norton has already released an update that fixes the crashes for its 2013 product line - a fix for norton 2012 should follow this week. for more information see: https://community.norton.com/t5/Norton-Toolbar-Norton-Identity/Firefox-18-Support-for-Norton-Toolbar/m-p/900991/highlight/true#M8266
    in the meanwhile you could disable the norton toolbar/identify safe in ''firefox > addons > extensions''. or [http://updatecenter.norton.com/?NUCLANG=en upgrade to a norton 2013 product] (which can be done free of charge when you're in an active subscription as far as i understand it).

Maybe you are looking for