Batteries are no good

I have had my Shuffle for less than a year and already the batteries seem to have a problem. After I charge it for different periods of time (overnight, 2 hours, 1 hour, 5 hours) it always goes dead after about 1-2 songs and the little battery indicator light on the back doesnt even work. I mean I didnt pay $130 to listen to one song every 4 hours. Does anyone have any reccomendations???
thanks

I agree. Have Apple send you a replacement iPod Shuffle.
http://depot.info.apple.com/ipod
CG

Similar Messages

Can anyone explain why my Apple Wireless mouse annoyingly disconnects every 4 or 5 minutes or so? It then remains disconnected for about 20 seconds before reconnecting again? Batteries are good but at a loss ... worked fine for year!

Can anyone please explain why my Apple wireless mouse keeps disconnecting from my imac? The batteries are good and the mouse in good clean order. Never had an issue previoulsy but now every 4 or 5 minutes the mouse diconnects and takes 20 seconds or so to connect again. Anyone else experienced this one?
Thanks
Jon.

Some folk have reported a similar issue apparently caused by the batteries being a bit loose in their box. The suggested fix for that is to insert a thin piece of cardboard between the battery cover and the batteries.

I have macair bought 2009. Bluetooth connect with mouse and keypad not working. It used to work. Batteries are good. Green light flashes on each device, but no connection. Any suggestions to help me here? Thanks.

Dear Community,
I have a macbook air bought new in 2009. Since 2011 I only use it occasionally as I now mainly use my iMac. The mouse and keyboard that came with the macbook air used to work fine with bluetooth connection to the macbookair, but now they don't. The batteries are good. The green light flashes showing it is seeking other bluetooth device to connect to. But they wont connect to my macbookair. What could the problem be? Your help would be much appreciated.

Thanks for that. Yes I checked that already and BT enabled. Yes, external keyboard. But I just moved the computer to different part of room and bingo the devices paired and connected. So problem now solved. Thanks for offering your help.

Why isn't my mouse opening anything when I click on it? It's moving around and the batteries are fine but it's not opening anything!

My mouse is not working with my computer. The batteries are good. The cursor arrow will move where I want it but when I click,nothing happens! Ugh! Is it thecomputer or the mouse? How can I fix it if the mouse doesn't work?

I was having all kinds of crazy mouse and trackpad problems after installing Lion.Reset PRAM and that helped briefly. Then found out my main battery was bad. Now that I have replaced it my mouse and track pad are behaving. It may have been coincidence or it may be that Lion is more sensitive to battery issues?
Worth checking your battery as this can cause all kinds of problems apparently.....

Batteries are working fine, but powercord will not charge them!

Hi i have 2 powerbooks, and one is not charging the batteries. I know for a fact that both batteries are fine because 1 PB charges them successfully, anyone got any idea what i could do to fix this? thx in advance.

Welcome to the Apple discussions.
There are 3 components to charging: Power adapter, battery, and logic board (and within that the dc-in card). If the adapters and batteries are good, then the dc-in card may have failed, which would be the next component in the chain. The dc-in card contains the jacks that the power adapter plugs into on the side of the Powerbook. You can see a picture of it at http://www.pbparts.com/shop//a15dlsdpsb.html
You can try the Apple hardware test, however, I don't recall it being particularly good at pointing out charging issues. It would be on the first OS X DVD that came with your system (should say 'AHT Vx.x' in small print on the DVD). Insert it, and reboot holding the option key down, follow directions and choose the extended test.

I am trying to connect a Macbook Pro to a projector for a Powerpoint presentation. When I use a VGA cable, the color of the projected images are not good. When I use a USB cable, the projected image includes the presenter notes on my computer screen?

I am trying to connect a Macbook Pro to a projector for a Powerpoint presentation. When I use a VGA cable, the color of the projected images are not good. When I use a USB cable, the projected image includes the presenter notes on my computer screen?

To move an iPhoto Library to a new machine:
Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
But however you do choose to link the two machines...
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
and select the Library that you moved. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else.
Your first option didn't work because you imported one Library to another. Every version and thumbnail is imported like a distinct photo, you lose all your Albums, Keywords etc., the link between Original and Previews is destroyed, the non-destructive editing feature is ruined and so on. In summary: it's mess.
Your second option didn't work because you simply referenced her library on the old machine.
Regards
TD

What are the good ways to send a big file( 20MB-100MB) file to my friend?

what are the good ways to send a big file( 20MB-100MB) file to my friend?
Thanks in advance

if this is with the internet, iChat is probly your best bet,
but if you just want a transfer,
plug a firewire into both of your computers, shutdown one of them, hold "T" and press the power button, the restarted computer should pop up as an external drive on the second computer.

My keyboard doens't work correctly when I push numbers it appears symbols and all the letters are not good

My keyboard doens't work correctly when I push numbers it appears symbols and all the letters are not good

I suspect someone or something in your house may have changed a keyboard preference. Try System Preferences - Keyboard - Keyboard tab - uncheck Use all F1......

My Magic Mouse loses its connection randomly and then re-connects later. Can anyone suggest why this happens? The batteries are fresh.

Lately my magic mouse has been losing its connection quite randomly. It usually reconnects soon after. I bought a cheap USB mouse to keep me going during these unexpected down-times. The batteries are fresh and the switch is on. I've uninstalled and re-installed the mouse in Bluetooth, but the problem recurs.

Try a PRAM reset. That usually helps bluetooth problems.
http://support.apple.com/kb/ht1379
There are some other causes relating to rechargable batteries, see this thread:
https://discussions.apple.com/thread/3058776?tstart=0
Regards,
Captfred

I just bought a Dell Precision M3800 laptop - screen res 3840 x 2160 when I open photoshop the task bar and tools and layers etc are in 4pts size   I changed my % in my image in my control panel and if I go to open file the drop down boxes are in good pt

I just bought a Dell Precision M3800 laptop - screen res 3840 x 2160 when I open photoshop the task bar and tools and layers etc are in 4pts size   I changed my % in my image in my control panel and if I go to open file the drop down boxes are in good pt sizes how do I make the layers and tool bars bigger? Please help@

Windows will scale applications display or windows will not scale application display depending on how the application is coded. Photoshop is coded in a way that its display is not scaled by windows. Photoshop knows about your displays high pixel count not its resolution so it uses its pixels however it does not scale its UI to make it usable on your display. Other application let Windows scale their display output.   For example Microsoft default for is Surface Pro 3, 216 ppi display is to scale applications display up 150% so the surface pro 3 display which has 2160x1440 pixels a 216 ppi resolution look like at display with the user is using with 1440x960 pixels. The Application works like the display is 1440x960 and Windows scale those pixels to the displays using the displays 2160x1440 pixels the effectively changing it resolution to 144ppi rather than the actual 216ppi.
The reg update and external manifest file effectively tells photoshop its working on such a size display display some number of pixel wide and some number photoshop uses that as the display size in turn Windows scale those pixels to use the displays 2160x1440 pixels efector lowing its 216ppi resolution. Photoshop CC 2014 2X UI would be like using windows 200% option applications would be shown the are working on a display 1080x720 instead of the Surface Pro 3 2160x1440. Note that 1080x720 does not meet PS requirement of 1024x768. Photoshop UI would not fit on the Surface Pro 3 display..
Since you have a 4k display if you have CC 2014 you can use its 2x UI effectively Photoshop will be running on a 1920x1080 display and have half the resolution of you 4K display 3840x2160 pixels four native pixels are use as a single pixel.   1920x1080 pixels exceed PS requirement.

Why "full scans are not evil, indexes are not good"

in this article inside asktom page
http://asktom.oracle.com/pls/ask/f?p=4950:8:::::F4950_P8_DISPLAYID:9422487749968
tell about "full scans are not evil, indexes are not good"
someone tell me why for this select mentioned index are not good?

...and if you read next post, nothing is black or white, it is all shades of grey .
This is not because your query will use index that it would be faster, and the example which Tom gave is really explicit :
With index usage 60127 consistent gets, and without index usage 92 consistent gets
Nicolas.
Message was edited by:
N. Gasparotto

Are there good number of XI related jobs in market ?

Are there good number of XI related jobs in market ?
How is Xi doing in market?
Does XI certification has a good recognition in market?

Hi
SAP-XI is a middleware.It is an Integration platform and Technology just like any other EAI(Enterprise Application Integration).For example TIBCO is a competitor for XI.
A knowledge of both Java and ABAP is required for SAP-XI.
Prospects of XI
Check out this Blog:
/people/sravya.talanki2/blog/2006/12/25/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-i
Thanks

I have a HP 5550 that has a jam code 13.01.00 and the feed tires are in good, also it had a 55.00.00

I'm trying to fix a HP C5550 printer and its having a paper Feed 1 late jam code 13.01.00 also it had one time a 55.00.00 Printer error
The feed tires are in good, May have some thing to do in the feed unit, if some one can help
Thanks
Peter

The access is by the panel at the rear, with the twist knob. Open it, and try to remove the paper carefully, not tearing it.After a few goes, it should print again, but it may restart your interrupted print. In this case, check for missing pages. It will almost certainly think it printed the trashed page.
(My own 5550 is about ready for retirement)

How can we find delivery documents which are not goods issued?

Hi All,
How can we find delivery documents which are not goods issued?
Thanks in advance

hi,
please check in VL06O.
there will be plenty of options on the same.
you are requested togo for push button FOR GOODS ISSUE from there u will go to VL06G only
your requrient will be satisfied.
regards,
balajia
Edited by: balaji timmampalli achari on Nov 11, 2010 12:39 PM
Edited by: balaji timmampalli achari on Nov 11, 2010 12:40 PM

The batteries are stuck in my trackpad!

Batteries are dead and I can't get them out. I don't see any visible signs of corrosion but then again I can't see anything but the negative end of only 1 battery. I've tried everything I can think of to get them out and they're not budging. Any thoughts?

Thanks for the suggestion. These are the batteries that actually came with my track pad. I made the foolish decision to recharge them even though they aren't rechargeable. They worked fine for about a month until they swelled slightly. The first battery slid right out, but the second one was jammed in there.
I drilled a shallow pilot hole then used a 2 1/2 " deck screw - it slid right out when I pulled back on the drill.

Batteries are no good

Similar Messages

Maybe you are looking for