Batteries are working fine, but powercord will not charge them!
Hi i have 2 powerbooks, and one is not charging the batteries. I know for a fact that both batteries are fine because 1 PB charges them successfully, anyone got any idea what i could do to fix this? thx in advance.
Welcome to the Apple discussions.
There are 3 components to charging: Power adapter, battery, and logic board (and within that the dc-in card). If the adapters and batteries are good, then the dc-in card may have failed, which would be the next component in the chain. The dc-in card contains the jacks that the power adapter plugs into on the side of the Powerbook. You can see a picture of it at http://www.pbparts.com/shop//a15dlsdpsb.html
You can try the Apple hardware test, however, I don't recall it being particularly good at pointing out charging issues. It would be on the first OS X DVD that came with your system (should say 'AHT Vx.x' in small print on the DVD). Insert it, and reboot holding the option key down, follow directions and choose the extended test.
Similar Messages
-
I have paid for creative cloud, photoshop works fine but it will not let me register lightroom
I have paid for creative cloud, photoshop works fine but it will not let me register Lightroom
Lightroom must be installed via the Creative Cloud Application.
It sounds like you have installed a Perpetual Licensed Version or a Trial Version of Lightroom. Uninstall any versions you have installed of Version 5 and then reinstall via the Creative Cloud App. -
Since upgrading, both our wireless printers are still visible, but OSX will not connect with them. Both work via connecting from other sources via the same wireless router (airport). What do I need to do to get my printing/scanning working again?
First thing to try is reset Printing System:
OS X Mavericks: Reset the printing system
Next would be reset the router (power off 15 secs then back on). And, 2 minutes later, reset the printers 1 by 1. -
I updated my Apple Iphone 3GS this morning and now my charger will not work. I can use my boyfirends just fine but mine will not worl at all. Why is this and is there anything that I can do?
Something is wrong with your charger or cable.
If it works with another charger, then it is not the iphone -
I have a speaker with I phone 30 pin dock, it use to work fine but i am not getting error saying accessory not supported,how i can determine what could be the problem
i am getting the same error with my rf transmitter that i use in my car- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Did this start happening after an iOS update? Sometimes an iOS update will break compatibility.
Sometimes this works:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
I have an old iPhone 3Gs with software version 4.3.5, I am trying to use it again, and it works fine, but I have not been able to update the software. Every time I try, I get the following message:
"there was a problem downloading the software for the iPhone, the network connection could not be established". This happens even though I have a working internet connection.
Besides that, all the other functions work properly, even synchronize apps and library.
Will I be able to update the software?look around the forum tons of people repport that they can't update
makes you suspect that apples update servers can't meet the depand of too many users
trying to update at once -
Dear Gurus,
Synchronization from SLD to LMDB is working fine, but data is not written to Software ==> Product Instance section tab. What could be the problem ? Normally it should gather automatically, but pushed me to select manually lots of component ???
Here is collecting is working fine !!!Hello Kemal,
You have to ensure that your Technical System info is properly filled automatically.
In LMDB you first create its Product System on LMDB Start Screen ProductSystem tab, after that please assign its respective Technical System. You probably need to run the Verification Check in order to confirm that your Product System has all Product Instances according on Technical System's Software Component Versions.
Regards.
Luis Roel -
I installed the LR CC, signed in and out, restarted computer, UN-installed CC and installed again, signed in and out several more times. Nothing!!! I have Lr5 and it works fine, Lr6/CC will not open. I'm lost!!
CC applications close immediately after launch
if that fails to help, contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html -
I am using mail for emails. It receives fine but it will not send. I am using an o2 account (smtp.o2.co.uk). Is o2 incompatible with mail? if so can you tell me which email application I can use instead? Many thanks Steve
Whilst it may not be your fault I am afraid it appears that your post is on a forum which is not the best for your OS. It will save the time of the unpaid volunteers here, and may resolve your issue faster, if you could examine the list below and see if there is a more appropriate forum to which you could direct your question.
OS X 10.9 Mavericks
OS X 10.8 Mountain Lion
OS X 10.7 Lion
OS X 10.6 Snow Leopard
OS X 10.5 Leopard
OS X 10.4 Tiger
OS X 10.3 and earlier
OS 9, OS 8 & System 7
OS X Technologies
OS X Server
iPad
iPhone
iPod
Other -
my ipod touch has stopped working. I will plug it into a wall, or computer, and it will register that it is plugged in, but it will not charge and turn on. does anyone have any advice? thank you.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I purchased elements 11 - I have installed on work computer but it will not allow me to install on laptop stating the code has already been used. Can anyone help me install on laptop please?
No, I have the music I want to move from the laptop to the phone selected. Then I go under file, devices, and try to click sync but it is not available to click.
-
I have legally purchased and downloaded FLAC music files online, but iTunes will not recognise them. I'm working on a PC. Can anybody help, please?
Hi anniepat,
FLAC files do not run on iTunes. See this article for how to convert your FLAC files to iTunes compatible format:
http://www.bigasoft.com/articles/how-to-import-flac-to-itunes.html
Cheers,
GB -
okay I will turn my iPhone 4 off then hook it up to my dell laptop in it will turn on but it will not charge and my computer wont install it on my computer can somebody help me please
yes it will charge otherwise places with the apdotor but when I put the just the wire in my pc it will not work it wont even be recognized by the cumputer (I know its not the wire because its chargeing now in a outlet ) iam try to reset it in the cp and itunes will not recognize it in the link did not help either
-
New AEBS installed, Vonage initially worked fine, but now is not.
I recently upgraded my home network, ditching the Linksys WRT54G router I had in favor of a new Airport Extreme Base Station. everything has been working fine, but all of a sudden I noticed that my Vonage adapter wasn't connected and was spitting out error 001.
The Vonage adapter is plugged into a 10/100 hub that's uplinked to one of the LAN ports on the AEBS (I know it's a waste, but nothing on that segment is gigabit capable…)
I launched into full troubleshooting mode, and determined that the cabling, hub and AEBS are all functioning perfectly. I also don't think that it could be a port forwarding issue, since several days passed between the time I swapped in the AEBS and the time when the Vonage adapter stopped working. In that time, several incoming and outgoing calls took place over the Vonage line and all was fine.
On a whim, I connected the Vonage adapter to a laptop and set it up with a static IP and attempted to configure port forwarding to it in the AEBS, but there was no change. Incidentally, with the static IP on the Vonage adapter, I was able to ping it from other computers on the network, but it still isn't able to download it's config from the outside world.
Vonage tech support has been willing to help, but unable to tell me anything useful thus far.
My question is, is anyone here using such a setup, and if so have you seen any issues like this? I'm really thinking that the adapter has given up the ghost, but I don't know.To help you with your troubleshooting you should visit https://forums.vonage.com/
I had Vonage. Initially it worked then I had tremendous voice dropouts. After weeks of troubleshooting with Vonage (they rolled back firmware in their adapter) it worked... for about 6 months. Then the same problem reappeared. Troubleshooting with Vonage could not solve the issue this time. Since I had to have phone service, I cancelled Vonage and went to ITP. Unfortunately Vonage stuck me with cancellation fees even though their service would not work for me. -
Can anyone help can not get my ipad to connect to wireless today. has been working fine but all of a sudden will not connect to Router. I have a kindle and a mobile and both of these will connect to the router wireless but the ipad will not.
Been to my parents with the i pad and this will connect to their wireless router.
Can not think of anything else to tryLook at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Also try this - Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Cheers, Tom
Maybe you are looking for
-
Error: The document could not be saved
Hi I opened one of pdf file from mapped network drive and then make comment in it and I am unable to save it. I receive the following error " The document could not be saved. Cannot save to this filename. Please save the document with a different na
-
iOS 8 / iTunes befor sync all with my iPhone 6 (music and pictures) are Crashing. And when i scroll in my Photo library, increased it. Shame problem to my ipad mini. But there i don`t can sync my music and pictures If Steve jobs still alive you would
-
I am setting up my new imac and wanted to transfer info from my old imac. My old imac is a G3 with OS 9.1 When I connect the fire wire cables and start the process it tells me my old imac has to have OS X. Is this true? or is there a way around it? i
-
A question regarding the RDF rule support in Oracle 11g: When creating custom rules, is there a way to infer the existence of new individuals, by constructing URIs as an expression involving some of the values in antecedents and using this in the con
-
Block site 1.1.8 not working right
why is it that when I added australianbrewingcompany.com to the block list it doesn't do it.