Battery after hard reset on Lumia 800

Hi
A few days ago i did a hard reset on my Lumia 800. Since that everything was great, the only reason why i did it, to restore the default settings. After that i updated the firmware to 12070 via Zune. Since that day, my phone doesn't really know how much  percentages are left from the battery. Sometimes It's showing a consant value for a long time, then suddenly begins to drain, and after a few it stops. It often happens, that it shows a value, and after an hour it shows a higher value (in percentage) than beforehand. 
Today I let It to discharge to 0%, and then i pluged it to the charger. When the phone turned on, it showed me 5%.
It's lifetime havent changed so spectacularly, but i guess its a bit shorter with the same usage.
Is this behaviour normal after hard reset? 
Thanks 

After update my lumia 800 is failing to recongnise earphone. It keeps playing music on speaker. If I restart my phone then for few mins it is playing music in earphone. But after few mins once again music playback is starting through speaker.
what should be the problem? will hard reset solve this problem? If yes, how to hard reset nokia lumia 800.
Thanks in adv,

Similar Messages

  • I unplugged my iphone 3gs ios 5.1.1 and started playing..i played for about 2 hours,BUT the battery didnt change!!!...after about 4 hours,the phone suddenly shuts down...i recalebrated the battery (by hard reset)..but didnt help...so HELPPP PLZZZ!!!!!!!

    i unplugged my iphone 3gs ios 5.1.1 and started playing..i played for about 2 hours,BUT the battery didnt change!!!...after about 4 hours,the phone suddenly shuts down...i recalebrated the battery (by hard reset)..but didnt help...so HELPPP PLZZZ!!!!!!!..+ when i charge my iphone, i dont see the lightning bolt,instead, i see a plug icon...i know this means th@ battery is full, but my battery is no where near full!!!!!

    Just a quick update with a couple more details before I go to work:
    I left my phone plugged into the wall charger all night long but the Apple logo is still blinking on and off. However, when unplugged from the charger, the screen goes blank and the unit does not respond to pressing/holding the buttons at all. Likewise, flipping the mute switch does not cause the phone to vibrate as it normally would, which made me wonder if power was being disrupted somewhere else in the unit before the battery. I just finished disassembling the unit down to the battery, looked for any loose connections etc., and did spot a suspicious looking spot on top of the #5 ribbon connector that I had not taken notice of before in my first disassembly. I'll take a picture of it and post a link for your consideration later on today when I have a spare moment, although I fear the worst.

  • Plssss help i beg all of u after hard reset my iphone got stuck with an apple symbol i thought it will get on and now the battery got empty and pressing power on button it switch on showing red battery and gets off and also its not connecting to my l

    Re: plssss help i beg all of u after hard reset my iphone got stuck with an apple symbol i thought it will get on and now the battery got empty and pressing power on button it switch on showing red battery and gets off and also its not connecting to my la
    its not connecting y?i think its software got corrupted,i think i should charge it first with a battery charger and when apple logo appears i should connect with pc,but i dont know how 2 open the back cover and how 2 remove the battery,i phone battery is removable or not?i mean it is fiz or wot?

    Recharge.  Reset.  Restore.

  • 8350i uncaught exception java.lang.NullPointerException after hard reset

    basic info:
    8350i
    v4.6.1.204 (Platform 3.0.0.73)
    Desktop Manager 4.7
    everything is good except that i've been using two batteries, one in the phone and one in a charger. when the phone's battery is almost drained i swap it with the charged one which of course causes a hard reset.
    this procedure was working well for at least a week or two until last month when i swapped batteries - after the hard reset i got
    uncaught exception: java.lang.NullPointerException
    i could make calls but all other software seemed corrupted... virtually nothing else worked... icons missing etc.
    tried all sorts of solutions but the only thing that fixed it was a full on device software erase/reload, then a data restore from previous backup. at the time i figured it was just a random thing and was glad to learn how to do a complete software reload.
    then yesterday it happened again (again, immediately at the end of the security check after hard reset). now i'm afraid to swap batteries because it would appear that every time i hard reset there is a 10% (my guess) chance of software corruption and a complete reload takes a significant amount of time.
    has anybody else noticed this? does anybody have a solution?
    can i swap batteries without a hard reset; i.e. swap while plugged into power? i haven't tried this yet for fear of causing my BB harm.
    any help is appreciated,
    john d.
    Solved!
    Go to Solution.

    Hello, John.
    Make selective backup as it is described here:
    http://supportforums.blackberry.com/rim/board/message?board.id=8100&view=by_date_ascending&message.i...
    Backup only information that you need.
    There is described the purpose of every database you can observe when you're doing the selective backup:
    http://www.blackberry.com/btsc/KB03974
    When you have done selective backup do the following.
    On your device go to: Options - Security Options - General Settings
    Open menu and select "Wipe handheld"

  • My ipod shuffle (4th gen) don't works after hard reset with itunes

    My ipod shuffle (4th gen) don't works after hard reset with itunes, it don't reads too like USB by Windows.
    Before that i've seen error (-50) in iTunes, so i reset ipod.
    I've read all tips on this site, but nothing helps me.

    No, USB works good. I've tried reset on my friend's PC, and it saw my ipod and reset was done. But when i tried to load music, it wrote me, that i've installed incorrect software.

  • Re-install N97mini after hard-reset

    Hey,
    I already paid the Software by credit card and downloaded it directly on the mobile phone.
    Few days ago I had troubles with my phone and I couldn't start it anymore. After hard-reseting it, it worked again.
    Unfortunately all software is gone now.
    When I start the Adobe Reader mobile it says "10 days trial" version. Do I have to pay again?
    Thanks for your answer

    Hey
    no you don't have to pay again absolutely, just download it again and insert the code received by mail
    Good luck

  • N8 Cant remove Topapps even after hard reset

    Hi,
    Few hours ago I just bought a new N8. It has in it TopApps and Ovi store, I wanted to remove Topapps but it continue to deny the operation. I tried soft reset, hard reset and in the ned 4 buttons reset. I tried also few solutions offered here in nokia forum but still without any sucess. I cant remove TopApps or Ovi Store even after hard reset, the maps are also here - I thought that these apps will disappear after hard reset.
    In applications I got 3 ovi store related apps installed - ovi, Ovi notifications support package and Ovi Store. Social network app is not working too, its showing me service unavailable. Any ideas ?
    Thank you for attention
    Solved!
    Go to Solution.

    Hi rslid,
    Nokia Store or rather Ovi Store is not deletable or uninstalabe as this is one of the applications that is necessary to enable you to download and update downloaded applications to your Nokia N8-00 Belle. If you try to delete or unistall you get the message operation denied so its better if you leave it.
    Concerning hard resetting, any time you feel like hard resetting your device use *#7370# followed by 12345 as the default security code unless you have manually changed it but always remember that it will delete all user data from both drive C and E hence a backup of your data with the phone settings unticked or not selected is strongly recomended before hard resetting and also note and remember that after hard resetting always reinstall your firmware to avoid having an unstable device.
    Ngwangwa - Six Million Ways To Die Choose One

  • After hard reset my time capsule is not found in airport even though its light is green so cannot reset

    After hard reset the time capsule is not found in airport even though i have reconnected in proper order - says backup disc not found

    Something is wrong because a hard reset will never leave the TC with green LED.
    What version TC.. what firmware??
    What OS on the computer?

  • N85 going slow after hard reset - help

    Hello
    I did a hard reset on the phone and now everything is going really slowly, especially messaging. Any solution please? Do I download new software and how?
    thank you.
    Message Edited by mark24601 on 05-Nov-2009 02:48 PM

    Make sure there is nothing installing in the background at times after hard reset the phone tries to install some applications that was stored in the card, so wait for sometime or try installing applications on the phone removing the memory card.
    If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

  • My 3GS has stopped playing any games even after hard reset.

    My 3GS has stopped playing any games even after hard reset. Touching the game icon, brings up the game screen but then immediately returns to the main menu.

    Hi there Casa_Pacifica,
    You may find the troubleshooting steps in the article below helpful.
    iPad: Basic troubleshooting
    http://support.apple.com/kb/ts3274
    -Griff W. 

  • Ovi Store Not Installing after Hard Resetting c7

    Hello Nokia. M from India and new here... Plz help me. After hard resetting by three buttons (home,volume,camera) everything gone like ovi store,ovi maps, social,and many other apps in video and tv.and now when i m installing ovi store it says unable to install.. I also went to Nokia care center to reinstall the software bt still not ovi icon.plz help me
    Solved!
    Go to Solution.

    Hey Frnds Ovi Store Is Working.............yupppyyyyyyyyyyyyyyyy Finally it installed on my c7 and n8 too......
    What should hv to do(for those whose ovi is unable to install):
    * just Format your phone via *#7370#
    * And after that no need to install any qt etc software,just check for SW update in your device.
    * And it will show an update of ovi store about 15 MB .
    * Thats it.
    why it was not showing an update before?
    ans. because i hv installed qt 4.7 and qt webkit.so SW update wasn't showing any update.
    I will request admin to move this thread to Solution section...
    thanx to every one 4 repling

  • Lumia 800 does not switch on after hard reset

    I did a hard reset the phone, when he was switched on.
    He switch off. Now it cannot be switched on.
    What would break? Hardware or Software?
    Attachments:
    Howtohardresetwindowsphone1_thumb.jpg ‏84 KB

    Hi SoldovskijBB,
    If the phone doesnt switch on after the hard reset, try to connect the device to Zune and see if it makes a difference. If not, itll be best to visit a local care centre where the phone can be checked. Have a look here to find your nearest care centre: http://europe.nokia.com/support/repair-and-recycle/repair/care-points
    Iris9290
    If my post has helped you in any way, please accept it as a solution or click on the white star, so that other users will be able to benefit from it too.

  • Can't check Lumia Amber update after hard reset no...

    Hi,I recently hard reset my phone , And I am having problem checking update in my phone it says error code : ******** . I have successfully updated my phone before I have hard reset it . Do you have a solution for this ?

    When was the last time you update your device?
    Can you provide us the error code? If it is found here: http://support.microsoft.com/kb/2793339, suggest to check and do the corresponding solution provided on the link as well.
    As this works for some, try to enable and then disable the airplane mode under Settings. After this, manually check for the update again.
    Let us know if this works or not.

  • Palm TX replacement unit has white screen issues even after hard reset

    I hope somebody can help me find a solution.
       I was a happy Palm OS user since the early days of Palm III.  After a Palm III and a V, had a Sony Clie that lasted a long time, but finally pooped out, went to a Z22 and broke the screen, then almost but not quite a year ago (in warranty, supposedly), purchased a Palm TX.  Worked great for a while but ended up with a unit I couldn't turn on or off because the power switch had died.  Worked around that by keeping the sync cord in and powering on by pushing the button and then canceling.  Finally sent it in for in-warranty repair.  Got back a new-to-me unit.  
       This worked fine for almost a month, then it started (with no new software or usage patterns) to have blank screen issues.  To solve this I have tried many things.  Soft resets, hard resets, leaving it to fully run out its battery for weeks at a time.  Nothing works; it continues to go blank on me.  In addition, the sound is strange and screechy when it beeps (e.g. accepting time zone after reset).  I bought the TX in the US when I was home for a visit last July, but am living in the Netherlands currently.
       I contacted the Palm repair center in the UK that replaced my original unit; they said would pass on word of my troubles to Palm and Palm should contact me, otherwise to e-mail them.  They haven't.  I can't find an e-mail address for to explain all of this to anyone with any power to help me.  I have tried to use the Palm support website to solve this problem, but neither the original serial number or the serial number of the replacement unit I have now is showing up as eligible for warranty repair.  I have tried to call the US Palm support number (http://kb.palm.com/wps/portal/kb/common/article/47005_en.html#howservice), but I get "calling is temporarily unavailable."  When I click "here" when asked "If you wish to query the warranty status of your handheld, or would prefer to arrange a repair through our Technical Support service, click here" (https://www.euroservice.palm.com/repair_entry/NLD/EE) I end up on a page that says simply "Please Enter the Source Url."  I am hesitant to supply credit card information for an issue that, if it can't be covered under warranty (which I think it should be, since I'm still within the original 12 month warranty period), I may well abandon.
        I am very frustrated in trying to get this fixed.  I am disappointed in the dwindling support for a PDA (that is not a phone) with Palm OS.  Since I am living (though not comfortably or well) without my calendar, address book, alarm, reader, dbs, cookbook, checklist, etc., I am seriously considering leaving the Palm OS.  My preference is to get this fixed, and my idea nearly a year ago was to ride the Palm OS until it disappeared completely (subsumed into phones anyway), but my problems have discouraged me to the point that I am wondering if this is my end.
       Does anyone have a suggestion?
    Post relates to: Palm TX
    This question was solved.
    View Solution.

    Thanks for your help!
    I don't know how to tell for certain if this is a US or a UK device, but it looks identical to the one I bought in a store in Seattle, and the first five and the last two num/letters of the serial number are identical.  I do know that when I sent it in originally for the power button failure, that the Palm repair center understood that it was a Palm purchased in the States.  Their description of the goods received is "Palm TX , US and ML" so it seems apparent that they knew it was a US device and rather than refusing to repair it, they had me send it to them.  And when my repair was returned, the repair details list "unit exchange" and type of unit is again listed as Palm TX US & ML.
    Well, regardless, I appreciate your pointing me in the right directions to someone who can help me.
    Ironically, I am no longer having the same issues with the Palm.  The latest round of letting the power run out after a hard reset and sit for a few weeks seems to have "fixed" it.  At least, I have been trying to break it (by using it) without success.  Recharged it, synced it, checked and sent mail with it, used all the programs I used to, and I haven't had a white screen in the past few days.  Hope my luck continues, but I don't trust it.  All hail frequent syncing.
    Thanks again. 

  • IPod won't start after hard reset - help appreciated

    I had a problem with syncing my iPod with iTunes. I connected and it strated syncing alright. After a couple of seconds everything froze. Smart as I am I thought there might be some errors on any of my disks the syncing process is reading from. Couldn't find anyhting though. My secodn guess would that I just bought a new external hard drive to which I transferred my library (maybe the iPod didn't knwo where to look).
    So my best guess was to perform a hard reset and re-sync everything. So I hooked up the iPod and quickly pressed the stop syncing button before nayhting could freeze. That worked well. You probably can guess what happened when performed the hard reset.....everything froze. And now.....my iPod is trying to restart, but at a certain point I hear the drive disconnect and starting up again. This keeps repeating over and over again. Hooking it up to my macbook has no avail. Any suggestions?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar
    It is very ikely that there is no way to recover any data from the iPod

Maybe you are looking for

  • Portal Activity Report is not getting updated properly

    Hi, I have created a test portal activity report with the Reporting type set as Page/iView activity.  I have added five iViews in this including a yahoo search URL iView.  The reporting period interval is set to Fixed Period with the date range that

  • DB02 in ECC60 on V5R4 takes a lot of time to open!!!

    Hi Guys, We recently installed an ECC60 system(SR2) on V5R4M0. The installation went pretty well. We installed a double stack system with both ABAP+JAVA. After the install, did the post install including creation of my new clients and SGEN. Scheduled

  • How can I create a schedule in Java for sending mail from SAP?

    Hello; I am coding a programme in Java which reads data from KM. I wish to schedule a job which sends mail to a list of persons selected from KM. I read the article by Prakash Singh and based my programme on his explanations. /people/prakash.singh4/b

  • HT1420 How can I deauthorise an ipod from a computer that I no longer have?

    I have bought my 3 kids ipod touches for christmas about 5 years ago and they lost them. So i went to Apple and had them replaced and now I can not authorize the new ones because of the old ones.

  • Advanced Software Rendering Solution For Games

    I am actually looking to talk to someone at sun but figured someone in this forum might be interested in what I have done as well. A few years back I developed a feature rich 3D api for java that is 100% software based. I realize there are some other