Battery and Icon Issues

My battery is not holding a charge and shuts down when unplugged from the charger. In addition the icon at the top of the screen shows an X in the battery icon. When placed on percent or time remaining it still only will show the X. The computer is less than one year old.

1) To increase the Ringtone Volume, simply go to your Profiles (Application on your home screen of the device) -> scroll down to 'Advanced' -> select the profile you want to edit -> scroll down to Phone/SMS... and there you can enter the Ringtone-Volume.
2) The 123 is because your keyboard is set to number-mode. Click on the shift key and it will go away. 
Message Edited by javec on 07-22-2008 11:04 PM
If your question was answered, please accept it as a sollution and / or give Kudos ;-)
Use the Search Field first! Maybe the question you want to ask already exists!

Similar Messages

  • Windows 10 Upgrade Salellite - Resolving battery and power issues

    My upgrade seemed to go smoothly until I tried to unplug my laptop and use it with the battery. It shut down even though it shows that I have 100% charge. It was working fine before the upgrade. When I put my model into the site it says that it is not compatible for the upgrade but otherwise everything seems fine so far except that I cant use my battery. Someone I know suggested that I might need to download a driver but I have no idea which one or if that is the problem. I would appreciate some help with this. I have Satellite C875-S7303. Model # PSCBAU-009005.  If anyone knows what I can do that would be so great. Thank you!

    Try these suggestions:
    Resolving battery and power issues
    Note that the article hasn't been updated for Windows 10, but the instructions are generally the same.

  • Battery and Magsafe issues

    I've had my Macbook for about 9 months and I am having issues with the magsafe and battery. If I try to run the computer without the battery installed it shuts down the first time it tries to access the HDD or requires even light use of the processor. In turn, whenever the compuer is plugged in, the battery charge hovers at about 95% and is constantly charging. As a result of this, the battery stops working at about 50% charge (The computer just dies mid-task and never goes to sleep) even though my cycle count is only 174. If I were to bring the computer in, could they replace the battery and magsafe since I am still under warranty?
    Message was edited by: Dachd43

    Seems I failed to read your post carefully the first time - apologies!
    First off, try resetting the SMC:
    http://docs.info.apple.com/article.html?artnum=303319
    If that fails to correct the problems, then you will need to contact AppleCare (or make a genius bar appointment and bring it into an Apple Store). It may be as "simple" as battery+charger, and they may start there, but it may also be an internal hardware issue. It's definitely a hardware issue, though, so you're covered under warranty.

  • I have a battery and Memory issue - late macbook pro 2011

    Macbook Pro 13" Late 2011 Model
    Battery Issue
    After upgrading to Lion, my batter life is 3 hours after full charge. It was 7-8 hours in leopard.
    Hoping this is a common issue and someone has a quick solution.
    Memory Issue
    I had 4GB Ram and found it would run to virtually nothing and not free any inactive RAM. I though the solution to this was to buy more RAM, which I did.
    I now have 8GB RAM and it agains runs to virtually nothing on non labour intensive software like safari or mail. It doesnt free up any RAM when it reaches a certain point. Instead it freezes and I'm forced to restart the computer. I use Final Cut Pro X and Photoshop/Illustrator fairly regualry. I'm assuming the RAM is is used with those but even when these are closed the RAM is low.
    Any ideas?
    Cheers

    You should take your Mac to an official apple retail store, as it is not common to have these problems regarding battery and memory.

  • Battery and power issues in T43

    Hi!
    I have a 2005 Think pad T43, that for the last month won't charge the battery. It is connected and the battery indicator light is on, but the battery keeps going down when plugged in to AC adapter. It was able to charge when I reset the battery soon after I first noticed this problem, but after that was finished, the problem remains. I then proceeded to use my computer with the battery removed and connected to the AC adapter. This worked for about 2-3 weeks until it suddenly turned off without warning. I turned it back on, it started to boot, then turned off again. I tried putting the battery back in, which succeeded in booting my computer, but then the battery died. I tried taking out the battery, unpluging it, and holding down the power button, but that did not help. My computer would turn on for a few seconds each time I turned it on, then would turn off. Now, it won't turn on at all, not even an indicator light. When the battery is in and it is plugged in, the battery indicator light is on. My battery and AC adapter are about a year old.
    I really don't want to buy a new computer but realize I might have to if I can't inexpensively fix this one. Any help or advice would be much appreciated.
    -Laura
    Message Edited by led2009 on 04-17-2009 01:47 PM

    BUMP
    I have the same problem. 
    The

  • Battery and WiFi issues after upgrade to 1.1.1?

    Since my upgrade to 1.1.1, my iPhone has had HORRIBLE battery life. I charged it all night last night and it is only almost noon, and I have not used it much at all, and it is already DEAD. It forced shutdown just now.
    Another issue that I have been having is the phones lack of ability to find any wireless networks without first rebooting the phone.
    I have done a full restore on the phone as well as a restore without restoring from backup, and the results have been the same.
    Has anyone else had these issues?

    REPLY TO ALL OF OF YOU AND REALLY WONDDERING WHAT MAY HAVE HAPPEN. I CAN REALLY TELL YOU WHAT HAPPEN. I MYSELF AM FROM MIAMI FLORIDA. I AM NOW IN LINCOLN NE. WELL ONE DAY WHEN I WAS AT THE HOTEL I DROPPED SERVICE. WELL AT THE TIME THAT I DROPPED SERVICE IT WAS BECAUSE OF A RAIN/THUNDERSTORM IN THE AREA. SEEING THAT I WAS IN LINCOLN NE AND THE NEARSET TOWER WAS IN OMAHA NE I STILL LOST SERVICE. WHEN AND I SAY WHEN YOUR PHONE LOOSES SERVICE IT SERCHES FOR SERVICE ALL THE TIME. EVEN THOUGH YOU LOOK AT YOUR PHONE AND IT SAYS NO SERVICE IT IS STILL LOOKING. THIS TIME IM TALKING ABOUT IT LOOKED FOR SERVICE FOR ABOUT 4 HOURS AND IT DIES NOT LONG AFTER THAT BUT IT SAID NO SERVICE THE ENTIRE TIME

  • Battery and charging issues

    I have a DROID X and have been having issues for the last few weeks with my phone staying charged and charging. I have had both my home and car chargers replaced. Everytime I charge my phone it says that it is charging bit the battery level does not improve. When I use my roommates charger it charges fine. Also the battery says I have a certain % of battery left then the next minute it goes down 10%andthat that happens whether it is charging or not. I don't know if a certain app could be causing this or if the phone is junk and I need to get it replaced. Its getting annoying that I have to charge it every night and can't be away from home because I wont have a charger. PLEASE HELP!!!

    trfalsone wrote:
    What app or type of app would you think could be causing the problem? I don't want to uninstall or factory reset my phone...if I wanted to do that I would just get a replacement phone. I do have an ATK on my phone...
    From your home screen, press menu>settings>about phone>battery use (unless Moto moved it).  This will give you a list of apps with a percentage of how much battery they have used.  Also an app called system panel in the market will help you to monitor what  is using system resources.  I would also personally recommend uninstalling ATK, though not all users would agree with me.  Maybe try turning off autokill and see if that helps.  I do agree with dirkbonn, though, that it sounds like a bad charger,

  • Battery and Sleep issues. Is this "normal"?

    Hey guys, ever since day 1 My new MBP has been experiencing the sleep issue where in sleep the battery would lose about 1-2%/hour. I would go to sleep with the battery at 100%, and wake up to only about 87%. Also, when it was new the battery had about 4650 for full charge capacity, now its showing only 4540 after 10 cycles!!! Is this normal? Please help my MBP is less than 2 weeks old I have owned the previous MBP model, and the battery life during sleep was considerably better than this, and also it took less time to charge the battery!
    Charge Information:
    Charge remaining (mAh): 3463
    Fully charged: No
    Charging: Yes
    Full charge capacity (mAh): 4540
    Health Information:
    Cycle count: 10
    Condition: Good
    Battery Installed: Yes
    Amperage (mA): 881
    Voltage (mV): 12070
    *I have also just updated the upgrade to 10.5.6. Will update and report if this will help with the sleep/battery issue.
    Thanks for your help!
    Message was edited by: Flyhighalwayz

    Reset the SMC (System Management Controller) and re-calibrate the Battery then see how it behaves ...

  • IPhone G3 Battery and Performance Issues

    I have a 16GB iPhone G3 (OS 3.1.2). It's only about 6 months old though it is the 4th iPhone G3 I've had since Sept '08. The others have been replaced by Apple for battery failure, modem failure and inability to stay 'connected' to a charging device even when physically still attached to the charger.
    I have over 8GB of free space, Push is turned off, WiFI is turned off 99% of the time, and I don't have any major apps that might use up a lot of the battery or CPU cycles.
    Ever since the 3.0 or 3.1 update:
    * My battery performance is only about 1/3 of it's previous performance. I've charged it from two different Macs as well as the car charger but still get horrible horrible battery life. It has simply made the device undependable while I am away from a charger.
    * My iPhone is regularly unresponsive. Sometimes for only 3 - 5 seconds, other times for up to 30 - 60 seconds. This happens whether or not the iPod is playing, whether or not Mail is downloading and even when nothing else at all is being used. This happens repeatedly throughout the day.
    Many times all the input events are buffered so it tries to perform them all once when the phone comes out of its stupor. Other times nothing at all happens once it revives.
    Several times a week I need to power it off just to get it to work again.
    * A few times a week applications don't load or quit properly:
    - Mail may load the header & footers but not the body of the app. None of the software controls work. Quitting the app and relaunching it does not resolve the problem - only a shutdown/restart does.
    - The green 'Return to Call' bar will stick around after a call is over and can only be removed by placing another call, leaving the phone app, touching the green bar to return to the call and then ending the call.
    - Maps loads the header & footer and a portion of the screen. None of the software controls work. Quitting the app and relaunching it sometimes resolves the problem but not always.
    - After some calls end the entire screen appears 'disabled' and the 'Home' button doesn't work. This usually requires a restart to correct.
    - The iPod will stop or stutter while some other process is running such as checking for mail or loading another app. What good is an iPod that can't play dependably while I use the device for other things?
    - I drop so many calls that if 'calls' were 'passes' my iPhone could play for the NY Knicks. I suspect it's probably an AT&T coverage issue though I would hope the NYC metro area would have better coverage than this.
    * Bluetooth just turns off all by itself. I have to go into the Settings and turn bluetooth back on. This happens with all three of the bluetooth headsets that I use.
    ~
    The phone is acting like it occasionally has a 'race' condition that is eating up the CPU cycles. It is so often and so unpredictable that I cannot pinpoint what the cause is.
    All this is very frustrating and tempting me to revert back to version 2 of the OS. I'm not happy at the thought of losing Copy & Paste but I certainly lose more time waiting for the device to decide to gets its act together than I would re-typing everything I copy & paste.
    I've considered going back to the Apple store again for another replacement but I have little confidence that #5 will be my lucky iPhone. I'm not sure why the quality has been so 'un-apple like' but I'm 0 - 4 with iPhones even though I treat them with care. Since this dismal performance appears to coincide with either the 3.0 or 3.1 update I'm not convinced it's even a hardware problem this time.
    As much as I depend on the phone & e-mail to run my business I can't rely on this iPhone at all.
    James

    I'd try to get a new one if you can. Hopefully it will come with 3.0 or older. Everything after 3.0 killed battery life.
    With version 2.0, using edge + Wifi, I was able to get 2.5 to 3 days with light usage. When I upgraded to 3.0, I got the same 2.5 - 3 days with light usage. My phone definately lagged a lot more due to installing new apps. However, I found if I turned on either push notifications or location services, my battery would last at most 5 hours, even if i wasn't using my phone.
    Just a month ago, we got 3G coverage in my town. I was hesitant to use it since battery life was already not stellar, but after testing it, I found I could use 3G and have push notifications on all the time and still get 2 - 3 days of battery. The only changes I made was I deleted about 1.5 gigabytes of old podcasts and I changed my mail settings from fetch manually to fetch off. I always noticed before my mail would try to fetch itself several times during the day even though it was set to fetch manual and it was wasting battery by doing this.
    I should mention that 3.0 did not make my battery life worse than 2.0, but I've read 3.1 and newer really kill battery life. I still suggest 3.0 over 2.0 since you get push services. I also didn't have many dropped calles on 2.0 or 3.0. I do notice that voicemails are lagged on 3.0, sometimes by a few minutes, other times by a few hours
    Hope this helps you.

  • 1st generation MacBook, battery and Leopard issues; looking for help please

    I have a 1st generation MacBook that started having battery problems immediately after installing Leopard. it was the same issue many others have complained about; battery life shortened and shutting down while on battery power with no warning. I have never had that problem while using Tiger. I experienced this with both 10.5.0 and the stand alone upgrade of 10.5.1 using an erase and install method.
    (BTW, as a side note: I'm religious about calibrating my battery every month and use a program called "CoconutBattery" to document the results. Prior to Leopard, the battery measured 97-99% capacity. Three days after Leopard was installed it was time for another check, the result was 74% capacity.)
    I had a clone backup of Tiger and immediately restored my MacBook, but the problem followed Tiger. I have Applecare and called support. Both myself and the tech found it rather hard to believe that the battery just suddenly failed coincidentally after the Leopard install. We went through the regular things; SMC reset, firmware checks, diagnostics, repair permissions, etc.
    We believe it has to do with the Battery Updater package. I had gone between both versions of 1.2 and 1.3, but the problem remained with both Tiger and Leopard. The tech decided to send me a new battery (it's on the way) and I wish to try installing Leopard again. As long as I have my cloned Tiger image, all I have to lose is my time, but hopefully, not another battery! I would honestly like to get Leopard running on this machine.
    But... here's my question. In reading through these discussions in both the Leopard and MacBook forum, there doesn't seem to be any consensus of which BatteryUpdater package to use. The Apple tech honestly told me he didn't know. Also, if the BU package "writes" to the battery (which it states it does), can it be downgraded once v1.3 has been installed? I mean, should I leave the battery out, install Leopard, then manually update BU to v1.2 before installing the battery (if possible)? I do plan on testing the new battery with my Tiger install, just to verify it is working as it was before.
    There are a lot of people here claiming to be knowledgeable about Leopard, never had any problems with a variety of machines, etc, etc, so I would appreciate your input. Please don't speculate, but if you're using a version of BU that works with Leopard and your 1st Gen MacBook, I would appreciate you telling me about it. I have tried to document and methodically relate everything I've done so far, but if you need additional information, just let me know.
    I noticed Leopard had installed BU v1.3 when I checked it, so it must use that as default, since I noticed Tiger had v1.2.
    OR, am I way off base on this? Can anyone think of another reason I may have had this problem? Am I barking up the wrong tree by concentrating on the BatteryUpdater package? Is it possible all these batteries are failing under a Leopard install maybe due to some unknown reason?
    Any knowledgeable advice or suggestions are welcome, thanks!

    Well, Ding Dang y'all... it appears the battery was the culprit. I received my replacement battery from Apple and followed the same steps and everything seems to be working fine.
    It sure was strange that the battery started this problem immediately after Leopard was installed... I don't know what to say about that, unless BatteryUpdater v1.3 started the chain of events.
    In case it helps someone else, here's exactly what I did (rebooted through each step):
    - Backed up data; unauthorized computer from iTunes
    - Erase and install from the Leopard disc, while keeping the old battery in
    - Installed Leopard, did software updates except for delta 10.5.1 update
    - Applied combo update of 10.5.1 from separately downloaded file
    - Found BatteryUpdater Bundle (BU) of v1.3, moved to trash, rebooted
    - Ran software updates, BU v1.2 was found and installed
    - Then, swapped out battery to new battery
    - Tested unit, seems to be okay now, no shutdown issues, battery runtime seems normal
    Thanks to all that had advice and suggestions. It was enough to get me to try it again. Now, I have two more machines to upgrade, since these are production machines, I'll probably wait awhile. But, having this is a real treat.
    Have a great holiday everyone!

  • TreeItemRenderer and Icons Issue

    Hi, i'm having the following problem with my custom
    TreeItemRenderer. I have 3 kinds of nodes. Company (tipo = 0), User
    (Tipo = 1) and Permission(Tipo = 2). All kinds have a checkbox and
    the user and permission types have custom icons. When i open and
    close the branches manualy or with as scrips some of my custom
    icons disapper or appear on wrong places. If somebody knows the
    solution for my issue I would be very thankful.
    Thanks,
    Peter
    package com.util.renderers {
    import flash.events.MouseEvent;
    import mx.collections.*;
    import mx.controls.CheckBox;
    import mx.controls.Image;
    import mx.controls.treeClasses.*;
    public class xTreeRendererChk extends TreeItemRenderer {
    [Embed(source="/assets/imagens/iconChave.png")]
    private var iconeChave:Class;
    [Embed(source="/assets/imagens/iconSelUsuario2.png")]
    private var iconeUsuario:Class;
    private var icone:Image;
    private var check:CheckBox;
    public function xTreeRendererChk() {
    super();
    //FUNÇÃO QUE SOBREESCREVE O METODO CREATECHILDREN
    CRIA OS CHECKS
    override protected function createChildren():void {
    super.createChildren();
    check = new CheckBox();
    icone = new Image();
    check.addEventListener(MouseEvent.CLICK,selecionarCheck)
    addChild(icone);
    addChild(check);
    if(super.data){
    check.visible =
    Boolean(int(TreeListData(super.listData).item.@chk));
    if(TreeListData(super.listData).item.@tipo == '0'){
    this.icone.visible = false;
    }else if(TreeListData(super.listData).item.@tipo == '1'){
    this.icone.source = iconeUsuario;
    super.icon.visible = false;
    }else if(TreeListData(super.listData).item.@tipo == '2'){
    this.icone.source = iconeChave;
    super.icon.visible = false;
    //FUNÇÃO QUE SOBREESCREVE O METODO SET DATA
    override public function set data(value:Object):void {
    super.data = value;
    //FUNÇÃO QUE SOBREESCREVE O METODO
    COMMITPROPERTIES
    override protected function commitProperties():void
    super.commitProperties();
    if(super.data){
    check.visible =
    Boolean(int(TreeListData(super.listData).item.@chk));
    if(TreeListData(super.listData).item.@tipo == '0'){
    this.icone.visible = false;
    }else if(TreeListData(super.listData).item.@tipo == '1'){
    this.icone.source = iconeUsuario;
    super.icon.visible = false;
    }else if(TreeListData(super.listData).item.@tipo == '2'){
    this.icone.source = iconeChave;
    super.icon.visible = false;
    //FUNÇÃO QUE SOBREESCREVE O METODO
    UPDATEDISPLAYLIST POSICIONA OS DISPLAYOBJECTS
    override protected function
    updateDisplayList(unscaledWidth:Number,
    unscaledHeight:Number):void {
    super.updateDisplayList(unscaledWidth, unscaledHeight);
    if(super.data) {
    super.label.text = TreeListData(super.listData).label;
    this.check.selected =
    Boolean(TreeListData(super.listData).item.@selecionado == '1');
    this.check.y = 9;
    if(TreeListData(super.listData).item.@tipo == '0'){
    this.check.x = super.icon.x;
    super.icon.x = this.check.x + 19
    super.label.x = super.icon.x + 18;
    }else if(TreeListData(super.listData).item.@tipo == '1'){
    this.check.x = super.icon.x;
    this.icone.width = 14;
    this.icone.height = 14;
    this.icone.x = this.check.x + 19;
    super.label.x = this.icone.x + 18;
    }else if(TreeListData(super.listData).item.@tipo == '2'){
    this.check.x = super.icon.x;
    this.icone.width = 14;
    this.icone.height = 14;
    this.icone.x = this.check.x + 19;
    super.label.x = this.icone.x + 18;
    //FUNÇÃO QUE MARCA/DESMARCA OS CHECKS
    private function selecionarCheck(Event:MouseEvent):void{
    if(Boolean(int(TreeListData(super.listData).item.@selecionado))){
    TreeListData(super.listData).item.@selecionado = '0';
    for(var i:int = 0; i <
    TreeListData(super.listData).item.descendants().length(); i++){
    TreeListData(super.listData).item.descendants()
    .@selecionado = '0';
    }else{
    TreeListData(super.listData).item.@selecionado='1'
    for(var j:int = 0; j <
    TreeListData(super.listData).item.descendants().length(); j++){
    TreeListData(super.listData).item.descendants()[j].@selecionado =
    '1';

    Thanks am aware of that...
    However am using 9i Forms. I checked the registry.dat file. The said parameter is set to "gif", but there is one parameter
    default.icons.iconpath
    This is blank. There is no definition in this one.
    Once again i repeat.... the icons in the toolbars (from the menus) is being shown. The ones on the buttons are not shown.
    Thanks
    Hemangi

  • Battery and Headphone issues

    I've had my iPod classic basically since it first came out (2005/2006?) but now the battery only remains charged for about 30 mins and the headphone jack only plays out of the left ear bud..My question is whether these be fixed/replaced and if so how much?

    It's been a while since I've checked prices but it's not going to be as cheap to repair as you'd like it to be. Considering you can get a brand new iPod Classic for $229 (no tax or shipping) from Amazon it might be better to buy a new one. You can always use the old one in a clock radio or stereo that uses the dock connector (that way the battery life or left side won't matter) or even in your car if you've got a dedicated iPod hook-up.

  • Battery and charging issues with a Zire 31

    I understand this machine is old and may no longer supported...but mine has just started doing some crazy things.  First...cannot charge using the normal charging device which came with the unit when purchases. It just does not make any connection.  Have been recharing using its USB port through trickle charging.  The unit get charged, but when you unplug from my desktop usb connection, the charge only last about 10 minutes and the machine goes dead again.  All the user manual tells you is how to charge it up...but no advice of what to do if that no longer functions.
    Does anyone know if this older Zire 31 can be repaired?
    Post relates to: Zire 31

    Usedpdaparts is one we recommend here often:
    http://www.usedpdaparts.com/Zire31.html
    WyreNut
    Post relates to: Centro (AT&T)
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Since downloading Yosemite, I have had performance, battery, and overheating issues. Help?

    Hello,
    I've been quite unfortunate with my laptop (Macbook Pro Early 2011) ever since downloading the Yosemite OS. It has been plagued with extremely slow speeds when running basically anything, the fan runs constantly, and the battery drains at a rate of 1% every minute it seems. I can typically only get an hour or 2 out of my MBP without having to run and find an outlet.
    The performance is extremely slow when opening apps, but not so bad once they are open and running. However, switching apps (e.g. from Chrome to iTunes) causes a long lag and leaves me unproductive. Some apps don't even open. It takes about 5 minutes to open one app, and about 15 minutes on average to use my computer once again after restarting.
    I've looked at various other discussions where people had problems, but each situation seemed unique with no solution working for everyone. I used Etrecheck to analyze my computer, but not knowing a lot about computers, I didn't find a solution. Below you will find the data. Any insight or solutions would help so much! I hate always having to be plugged in and burning my legs when my laptop is on my lap.
    EtreCheck version: 2.0.11 (98)
    Report generated November 10, 2014 at 12:07:25 PM EST
    Hardware Information: ℹ️
      MacBook Pro (13-inch, Early 2011) (Verified)
      MacBook Pro - model: MacBookPro8,1
      1 2.3 GHz Intel Core i5 CPU: 2-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 384 MB
      Color LCD 1280 x 800
    System Software: ℹ️
      OS X 10.10 (14A389) - Uptime: 5 days 13:16:15
    Disk Information: ℹ️
      ST9320325ASG disk0 : (320.07 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk1) /  [Startup]: 318.84 GB (75.40 GB free)
      Encrypted AES-XTS Unlocked
      Core Storage: disk0s2 319.21 GB Online
      MATSHITADVD-R   UJ-898 
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Configuration files: ℹ️
      /etc/hosts - Count: 30
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Library/Application Support/Symantec/Protector
      [not loaded] com.symantec.kext.protector.panther (1.0f5) Support
      [not loaded] com.symantec.kext.protector.tigerplus (1.0f5) Support
      /Library/StartupItems/SymAutoProtect
      [not loaded] com.Symantec.kext.SAVAPComm (11.0.6) Support
      /System/Library/Extensions
      [loaded] com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) Support
    Startup Items: ℹ️
      NortonMissedTasks: Path: /Library/StartupItems/NortonMissedTasks
      SMC: Path: /Library/StartupItems/SMC
      SymAutoProtect: Path: /Library/StartupItems/SymAutoProtect
      SymProtector: Path: /Library/StartupItems/SymProtector
      Startup items are obsolete and will not work in future versions of OS X
    Problem System Launch Agents: ℹ️
      [failed] com.apple.CallHistoryPluginHelper.plist
      [failed] com.apple.CallHistorySyncHelper.plist
      [failed] com.apple.cmfsyncagent.plist
      [failed] com.apple.coreservices.appleid.authentication.plist
      [failed] com.apple.printtool.agent.plist
      [failed] com.apple.rcd.plist
      [failed] com.apple.scopedbookmarkagent.xpc.plist
      [failed] com.apple.spindump_agent.plist
      [failed] com.apple.Spotlight.plist
      [failed] com.apple.telephonyutilities.callservicesd.plist
      [failed] com.apple.xpc.loginitemregisterd.plist
    Problem System Launch Daemons: ℹ️
      [failed] com.apple.awdd.plist
      [failed] com.apple.ctkd.plist
      [failed] com.apple.icloud.findmydeviced.plist
      [failed] com.apple.ifdreader.plist
      [failed] com.apple.nehelper.plist
      [failed] com.apple.periodic-weekly.plist
      [failed] com.apple.spindump.plist
      [failed] com.apple.tccd.system.plist
      [failed] com.apple.wdhelper.plist
      [failed] com.apple.xpc.smd.plist
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [failed] com.adobe.CS5ServiceManager.plist Support
      [loaded] com.divx.dms.agent.plist Support
      [loaded] com.divx.update.agent.plist Support
      [loaded] com.google.keystone.agent.plist Support
      [running] com.symantec.quickmenu.application.plist Support
    Launch Daemons: ℹ️
      [failed] com.adobe.fpsaud.plist Support
      [invalid?] com.adobe.SwitchBoard.plist Support
      [loaded] com.cloudpath.maccmd.plist Support
      [loaded] com.google.keystone.daemon.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [loaded] com.oracle.java.JavaUpdateHelper.plist Support
      [running] hdjsd.plist Support
    User Launch Agents: ℹ️
      [loaded] com.adobe.AAM.Updater-1.0.plist Support
      [running] com.akamai.single-user-client.plist Support
      [loaded] com.divx.agent.postinstall.plist Support
      [failed] com.facebook.videochat.[redacted].plist Support
    User Login Items: ℹ️
      iSyncr Application (/Applications/iSyncr.app)
      Flux Application (/Applications/Flux.app)
      Steam UNKNOWN (missing value)
      iTunesHelper UNKNOWNHidden (missing value)
      VMware Fusion Helper UNKNOWN (missing value)
      CrossOver CD Helper UNKNOWN (missing value)
      uTorrent Application (/Applications/uTorrent.app)
      Google Drive Application (/Applications/Google Drive.app)
      Spotify UNKNOWN (missing value)
      Dropbox Application (/Applications/Dropbox.app)
      Google Chrome ApplicationHidden (/Applications/Google Chrome.app)
      Notify ApplicationHidden (/Library/Application Support/Pharos/Notify.app)
      Popup ApplicationHidden (/Library/Application Support/Pharos/Popup.app)
      SAVDiskMountNotify Application (/Library/Application Support/Symantec/AntiVirus/SAVDiskMountNotify.app)
      ScanNotification Application (/Library/Application Support/Symantec/AntiVirus/ScanNotification.app)
      SymSecondaryLaunch Application (/Library/Application Support/Norton Solutions Support/Scheduler/SymSecondaryLaunch.app)
    Internet Plug-ins: ℹ️
      o1dbrowserplugin: Version: 5.38.5.0 - SDK 10.8 Support
      OVSHelper: Version: 1.1 Support
      Default Browser: Version: 600 - SDK 10.10
      Flip4Mac WMV Plugin: Version: 3.0.0.104 BETA  - SDK 10.8 Support
      net.juniper.DSSafariExtensions: Version: (null) Support
      Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
      FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
      DivXBrowserPlugin: Version: 2.2 Support
      Flash Player: Version: 15.0.0.152 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.189
      QuickTime Plugin: Version: 7.7.3
      googletalkbrowserplugin: Version: 5.38.5.0 - SDK 10.8 Support
      iPhotoPhotocast: Version: 7.0 - SDK 10.7
      SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
      JavaAppletPlugin: Version: Java 7 Update 55 Check version
    User Internet Plug-ins: ℹ️
      CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
      Google Earth Web Plug-in: Version: 7.1 Support
    Safari Extensions: ℹ️
      searchtab
      DivX Plus Web Player HTML5 <video>
    3rd Party Preference Panes: ℹ️
      Akamai NetSession Preferences  Support
      DivX  Support
      Flash Player  Support
      Flip4Mac WMV  Support
      Growl  Support
      MusicManager  Support
      Perian  Support
      SymAutoProtect
      Symantec\nQuickMenu  Support
    Time Machine: ℹ️
      Skip System Files: NO
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 318.84 GB Disk used: 243.44 GB
      Destinations:
      Seagate Backup Plus Drive [Local]
      Total size: 999.86 GB
      Total number of backups: 10
      Oldest backup: 2013-08-15 02:25:42 +0000
      Last backup: 2014-06-07 16:57:46 +0000
      Size of backup disk: Excellent
      Backup size 999.86 GB > (Disk size 318.84 GB X 3)
    Top Processes by CPU: ℹ️
        383% ReportCrash
          1% Google Chrome
          1% coresymbolicationd
          0% Spotlight
          0% Dropbox
    Top Processes by Memory: ℹ️
      142 MB Google Chrome
      116 MB Finder
      76 MB ReportCrash
      72 MB Google Chrome Helper
      47 MB quicklookd
    Virtual Memory Information: ℹ️
      61 MB Free RAM
      1.12 GB Active RAM
      966 MB Inactive RAM
      1.18 GB Wired RAM
      105.25 GB Page-ins
      1.37 GB Page-outs

    Thanks.  Tried all of this already.  Wifi works on all other devices including ipad running iOS 6.  Tbis problem manifested itself after I updated.

  • New Mac Battery and Charger Issue

    Ok today I got a new battery from the apple store for my macbook pro. Everything seems to work. As usual with any new battery I wanted to turn my macbook pro off and charge it fully. Well I went to charge it and the light on the indicator was red meaning charging. But all of a sudden the light turned to green. This I know is not correct because I know from when I was in the apple store, the battery was at 56%. So right now I am not charging it because I don't want to destroy this battery like my last one. is this a malfunction with my computer or charger?

    If you have a charging problem, it's probably related to hardware rather than OS 10.4.x. So, suggest you post your question in the MacBook Pro forum http://discussions.apple.com/category.jspa?categoryID=190 where other MBP users hang out.
     Cheers, Tom

Maybe you are looking for