Battery Backup Unit Nonsense. I'm not paying for your problems!

I may have to get rid of my service. These "Jackies" want me to pay $40 for a battery for THEIR battery backup unit that was installed in my apartment before I moved in over 2 years ago. I refuse to pay for your equipment's problems. This is ridiculous. Anyone else have this problem?  Customer service sucks in this company. 

I found it online at amazon for 12 bucks and shipping.   12 V 8 AH sealed lead acid battery with an f2 connector
I know you probably don't want to hear it's in the Terms of service, but it is.    

Similar Messages

  • HT201407 I backed up my phone before it was replaced.  My apps have disappeared altogether, and my music is there but it indicates that I need to download (not pay for) each track again.  What have I missed?

    I backed up my phone before it was replaced.  My apps have disappeared altogether, and my music is there but it indicates that I need to download (not pay for) each track again. It's only small stuff, but my ringtones and photos and background etc have all gone, too.  What have I missed?

    How to BackUp  >  http://support.apple.com/kb/ht1766
    What gets Backed Up
    iTunes http://support.apple.com/kb/ht4946
    iCloud http://support.apple.com/kb/PH2584
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • " Unit of measure ****** is not defined; check your entry in table T006

    I´m Trying to create a material from MDM to SAP and I´m monitoring the IDOC in  WE05 and i get the next message:
    " Unit of measure ****** is not defined; check your entry
    Message no. M3490
    Diagnosis
    The key for the unit of measure you entered is not defined in table T006.
    Procedure
    Define the unit of measure through Customizing (Materials Management). "
    In MDM we are sending as remote key the SAP Code and this code exists in the table T006, but in the information of failed IDOC say:
    " Messages have been issued: number 0000000000184470
    Message no. MK101
    Diagnosis
    During inbound processing for the IDoc, messages have arisen while checking material data. "
    If someone has information about it ,pls I´ll appreciate your answer.
    Regards Itzell T.

    I´m Trying to create a material from MDM to SAP and I´m monitoring the IDOC in WE05 and i get the next message:
    " Unit of measure ****** is not defined; check your entry
    Message no. M3490
    Diagnosis
    The key for the unit of measure you entered is not defined in table T006.
    Procedure
    Define the unit of measure through Customizing (Materials Management). "
    In MDM we are sending as remote key the SAP Code and this code exists in the table T006, but in the information of failed IDOC say:
    " Messages have been issued: number 0000000000184470
    Message no. MK101
    Diagnosis
    During inbound processing for the IDoc, messages have arisen while checking material data. "
    If someone has information about it ,pls I´ll appreciate your answer.
    Regards Itzell T.
      Hi Itzell T,
          While creating the material the unit of measurement which is entered is not existing in the SAP System. The unit of measurement entered during creation of material is cross checked from enteries of check table T006.
          So, functional consultant should take care of this issue just let him know the message.
       He know what problem actually is and fix the problem as Ankur had said.

  • Error message :PurchOrder : Unit of measure PC not defined for language ES,

    Hello,
    I am facing a problem with PO replication to R/3 backend.
    POs are not replicated to R/3, POs are in status 'Transfer Failed (E.Sys.)'  .
    When I check with 'RZ20' transaction I got this message :
    PurchOrder : Unit of measure PC not defined for language ES.
    SRM 4.0 Extended classic scenario
    Regards,
    Shaiek

    Hi
    This seems to be a configuration issue,.
    Pls maintain the unit of measure in configuration using transaction CUNI
    Hope this will help.
    Pls reward suitable points.
    Regards
    - Atul

  • Error as unit of measure PC not defined for language RO while creation ofPO

    Hi GUYS,
    When am trying to create a PO in ME21N transaction i got error as below,
    unit of measure PC not defined for language RU
    Message no. 06079
    Table 006A contains no entry for this unit of measure
    Please let me know what action to be taken from my side to over come this issue.
    Note: If i check the related vendor i could able to view that the language maintained as RU.
    Cheers,
    Kumar.S

    Hi Jurgen,
    Thanks for your reply once again.
    As mentioned by you earlier i have tried to login with languae RU in Q system but unfortunately i got an error saying taht language not installed.
    Also we found for Language - EN and UOM - PC has been maintianed in T006A table.But if i check for lanugage - RU and UOM PC combinatoin has not manintaned in T006A table.
    Please let me know how to maintain the values in this table T006A for combination Lang - RU and UOM - PC.
    Please revert back with your soilution.
    Note: I have tried in SM30 but failed due to below error
    The maintenance dialog for T006A is incomplete or not defined
    Cheers,
    Kumar.S

  • Unit of measure PCS not defined for language FR

    Dear Gurus,
    I try to raise a PO in ME21N, when saving the order, I am being prompted by the system with the following message:
    "Unit of measure PCS not defined for language FR"
    I then went to MM02 to check the material master data "Sales Text" Tab.
    There the only language available is English, so I clicked on the "Language Maintained" Tab and created a new language for French.
    The problem is that when I want to save the changes, the system prompts me with the following message:
    "Blank texts exist in the following languages: French and English, these texts will be deleted"
    Then the Material Master Data closes and no changes have been made.
    Can you please guide me through step by step of what I have to do to be able to populate the field "PCS" for pieces in French so that it is taken into account in the Material Master Data and by extension in a PO.
    Thanks for your help.
    KInd regards
    Chris

    Hi Chris,
    Goto T code CUNI. In the first screen click on GOTO-Translation-dimension.
    Enter EN in Source language and FR in Target.Maintain the entry there.

  • Unit of Measure TON not defined for language PT ?

    Hi all,
    I'm new to MM and to SAP in general and I have 2 questions for now :
    1. I have a requisition which is set up using unit of measure TON. When I try to create the PO, an error message pops up saying " Unit of measure TON not defined for language PT ". Do you know what does language PT means and why does this error appears? When I try to convert the TON into TNE, the same message pops up : " Unit of measure TNE not defined for language PT ".
    I also can not convert TON into EA...any ideas why?
    2. How can I see the total value of a PO that has many lines ?
    Thank you very much
    Iuliana

    Hi
    Is this error  "" Unidade de medida *** não definida em idioma PT ""
    appearing only when you select Ton, or any other unit.
    pl. clarify.
    I have seen that you get this message when your loging Login language is Portuguese.
    Any how Configuration of units needs to be checked in
    Spro >General setting > check Units of measurements ,
    ( or pl. use Tcode --  Cuni )
    I also can not convert TON into EA...any ideas why?
    can you give me some more inputs, what erro are u getting ?
    2. you can see the total Po. values in Po header details
    under status tab view.
    if my soln is found usefull
    Pl. award me points
    Thanks
    Prasanna kumar .b.a

  • Unit of measure EA not defined for language PT

    Hello,
    Vendor Communication is maintained in "Portuguese language-PT", while creation of Scheduling agreement system will given the below error, bcz Scheduling agreement will taken the Langause from vendr master
    "Unit of measure EA not defined for language PT"
    Table 006A contains no entry for this unit of measure.
    We have cross checked Material master and maintained the "langauge-PT" in material master additional data.
    Checked  T006A table for "EA" found for language "EN, DE, CN etc. not for "PT"  how to maintain T006A table for Portuguase langauge.
    Regards
    Mahesh Naik

    >
    Mahesh Naik wrote:
    > Hello,
    >
    > Suppose we have changed the source langauge "EN" to Target Langauge"PT" is it change all the Unit from EN to PT. after that how the system will pick english language's
    No, it just gives you all the units maintained in that source language as a proposal to enter the description in target language PT, there will not be any change to the source language EN while maintaining a translation.

  • How to stop the charges incurred to my account based on the action of itunes storing U2's newest album into my iPhone that I personally did not pay for?

    How to stop the charges incurred to my account based on the action of itunes storing U2's newest album into my iPhone that I personally did not pay for?

    There was no charge. The album was free.

  • Help solve the problem, with the lifting of purchasing and payment card is locked, and now I can not pay for her purchases in the app store

    help solve the problem, with the lifting of purchasing and payment card is locked, and now I can not pay for her purchases in the app store

    Contact the App store for Apple ID help. Their support link is on the right of the App store window
    LN

  • How I can delete a page from BC if customer not pay for it?

    How I can delete a web page from BC. My customer does not pay for the website since the end of 2014. He does not want it anymore. The can not open admin panel  I can not delete a page and remove all records of domains assigned to this page.
    Support from BC was useless:
    Aishvarya Raj Rastogi (Sat, 1/31/2015, 02:08:07 am)
    You can't delete a site with over due invoice
    Aishvarya Raj Rastogi (Sat, 1/31/2015, 02:09:06 am)
    Anything else I may assist you with today?
    ireneusz (Sat, 1/31/2015, 02:11:01 am)
    if the customer does not pay and I want to delete a page that I have to pay for it?
    Aishvarya Raj Rastogi (Sat, 1/31/2015, 02:11:09 am)
    Yes
    ireneusz (Sat, 1/31/2015, 02:14:17 am)
    and what happens if I do not pay and customer don't pay also? Site is still running? and I do not I wanna to.
    Aishvarya Raj Rastogi (Sat, 1/31/2015, 02:15:17 am)
    It will be disabled after 21 days of the dua date
    Aishvarya Raj Rastogi (Sat, 1/31/2015, 02:15:22 am)
    Due
    ireneusz (Sat, 1/31/2015, 02:16:33 am)
    it is ok. thanks
    Aishvarya Raj Rastogi (Sat, 1/31/2015, 02:16:38 am)
    Thank you for contacting us and have a great day.
    After 3 months of site is still running and online
    the only thing I can do is remove the template via ftp
    Wiadomość była edytowana przez: Ireneusz Szandala

    Log in to your website, click site settings > site management > delete site. Hope this helps!

  • I want to cancel my membership.  I did not order it, did not ask for it and will not pay for it.  It is impossible to reach you and I am done trying.  I have spent over 30 minutes trying.  If you do not cancel IMMEDIATELY.

    I am trying to cancel my membership but find it impossible to do so.  How do you contact them to do this?  I did not order and do not want this service and will not pay for it.  Has anyone else experience this unasked for and illegal billing?  What did you do in order to cancel membership?

    Cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • The item is not available for your selected device

    Greetings  for everybody 
    really  i read this statement a lot 
    and i have  blackberry q10 
    and just i want to install viber for blackberry and i saw this "the item is not available for your selected device" 
    and its not for one app
    if u have  anything to do tell me i want to install a lot of appssssss from app world  
    thanks for  reading  
    sorry for long message  
    thanks agian 

    Viber10 is not released for the Q10, currently only for the Z3, Z10, Z30 and P9882 models
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • When I try to watch certain videos on my ipad2 it says Thanks for trying to access Flash Player. Unfortunately it is not available for your device because of restrictions that Apple has put in place.  Can any tell me what app I can download to replace it.

    When I try to watch certain videos on my ipad2 it says Thanks for trying to access Flash Player. Unfortunately it is not available for your device because of restrictions that Apple has put in place.  Can any tell me what app I can download to replace adobe flash player.
    Thanks

    Use the iSwifter browser from the app store. Works for most flash content.

  • Not able to create database even with a subscription. (The operation is not supported for your subscription offer type)

    Hi,
    I am trying to create a SQL server database, but are not able to. I get this message: The operation is not supported for your subscription offer type.
    I have to azure accounts and this is only happening in one of them.
    I have created a subscription, but I can see that I have 1250 NOK in credit that is expiring in 29 days.
    Regards
    Christian
    ChristianLLoyd

    Hi Christian,
    The error you saw should only occur for a subscription used with a free trial offer type. Please use the below link to open a support ticket.
    http://azure.microsoft.com/en-us/support/options/
    You can check the following links for similar issues.
    The operation is not supported for your subscription offer type
    Could not submit the request to create database
    DBNAME. The operation is not supported for your subscription offer type
    Thanks,
    Lydia Zhang
    If you have any feedback on our support, please click
    here.
    Lydia Zhang
    TechNet Community Support

Maybe you are looking for

  • IMovie 10: Create project file to be burned using Toast 11

    **I am brand new to the community so if I commit some faux pas, mea culpa in advance!  I searched previous postings but didn't find exactly what I was looking for.** I created a photo slide show in iMovie 10 with transitions, some over layed text, an

  • Add a podcast from rss feed

    Hi. How can I add a podcast, that is not in the iTunes podcast directory, but only is presented as a web-page and an rss-feed?

  • Oracle Dbca Problem

    Hello, i tried oracle for the first time in RHEL4, i installed oracle and tried creating database using DBCA, it came to the last step like the html file for confirmation, and then it was not showing any option like create database or Ok to create da

  • File name vs. class name?

    I'm confused. I'm working through some tutorials and lessons teaching myself Java. I have yet to read anything regarding the name of the file vs. any names within the program. The name of the file has to match what exactly? The name of.....

  • FM for deletion of objects

    Hi, Please let me know a function module to delete all the objects in a package. I need to write a program to delete all the objects in a package. Regards, Chaithanya.