Battery capacity very low

Hello,
I removed the battery and used the power socket only, then when I replaced it back it is not recognized any more.
Product Name: Pavilion dv4
Operating System: Windows 7 64-bit.
Error message: Battery capacity very low, this message appears before the windows starts.
Could you please help me with this issue?
THank you very much.

Hello,
I removed the battery and used the power socket only, then when I replaced it back it is not recognized any more.
Product Name: Pavilion dv4
Operating System: Windows 7 64-bit.
Error message: Battery capacity very low, this message appears before the windows starts.
Could you please help me with this issue?
THank you very much.

Similar Messages

  • Battery capacity very low, despite careful use and maintenence

    Hello,
    The current battery capacity of my MacBook Pro seems to be diminishing rather swiftly. I bought my Mac around 4 months ago, and have been using it for less than 3 months. I try to run Battery Calibration often (sometimes many times in a row, just because the situation allows for it), and I have never started charging it until it has went into standby due to low power. I tend to use it when running on battery, though I do occasionally keep the power-cord plugged in when fully charged.
    The problem is, my overall battery life is down to 93% of the original, only with 63 loadcycles. That's not the worst part - it has recently been going down even quicker then before when 98% or so worried me.
    I have kept a log of the life of my battery using CoconutBattery, it is as follows (in order from earliest to most recent):
    98 % (5440 mAh) 2007-09-06
    99 % (5464 mAh) 2007-09-09
    98 % (5410 mAh) 2007-09-10
    98 % (5440 mAh) 2007-09-12
    98 % (5444 mAh) 2007-09-13
    99 % (5450 mAh) 2007-09-13
    99 % (5450 mAh) 2007-09-15
    99 % (5463 mAh) 2007-09-15
    98 % (5420 mAh) 2007-09-17
    98 % (5429 mAh) 2007-09-19
    98 % (5443 mAh) 2007-09-21
    98 % (5392 mAh) 2007-09-21
    97 % (5387 mAh) 2007-09-22
    97 % (5360 mAh) 2007-09-26
    97 % (5352 mAh) 2007-10-01
    97 % (5387 mAh) 2007-10-04
    100 % (5544 mAh) 2007-10-15
    97 % (5339 mAh) 2007-10-16
    96 % (5292 mAh) 2007-10-17
    98 % (5437 mAh) 2007-10-19
    95 % (5242 mAh) 2007-10-21
    93 % (5143 mAh) 2007-10-23
    Why are there so many jumps in percent, both up and down? How can I improve on my battery capacity? Can I anyhow make it increase back to the full 100%?
    Is it better to keep it plugged-in or use the battery? Is the OK to charge it often?
    Thank you for your time. I hope you can help!
    Rudi

    It doesn't say that on the apple site!
    You're right, it doesn't. It in fact actually implies the opposite…
    "Standard Maintenance
    For proper maintenance of a lithium-based battery, it’s important to keep the electrons in it moving occasionally. Apple does not recommend leaving your portable plugged in all the time. An ideal use would be a commuter who uses her MacBook Pro on the train, then plugs it in at the office to charge. This keeps the battery juices flowing. If on the other hand, you use a desktop computer at work, and save a notebook for infrequent travel, Apple recommends charging and discharging its battery at least once per month."
    http://www.apple.com/batteries/notebooks.html
    Thing is, this text is aimed at those that rarely use their batteries as opposed to that those that do given that with regular battery use you're already doing the right thing.
    Additionally, by regularly using your battery the function a calibration is actually relegated to a way of accurate reporting. Over time the cells degrade and the battery's circuitry as well as your MBP's SMC gets out of sync with this which results in incorrect battery run time figures. In the worst case this irregularity can result in your MBP shutting off without warning as it thinks it has more power than it really does. Calibration just lines this all back up again.
    This does not mean you shouldn't calibrate but to do it only every now and then. I have an iCal to-do item to do it after 6 weeks from the last one although it can actually mean I don't do it for 8-10 weeks.
    maybe change the battery - if so, will I still be able to purchase a new battery for my current SR model? Or should I buy one and keep it in stock now?
    Assuming Apple changes the MBP battery on it's next revision you'll still be able to purchase new batteries for your MBP. While they don't make then indefinitely they won't leave us high and dry without a source of new batteries even after a line is not longer current.
    Buying new batery is not recommended until you actually need it as Li based batteries degrade from the time they're made so the newer the stock the better.

  • Primary (internal battery) 601 very low how to correct this

    Primary (internal battery) 601 very low how to correct this my model no is HP pavilion g4 its g series

    Hi,
    Pleae try the following test. If failed you have to replace the battery (the main, big battery which powers the laptop):
        http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00821536
    Regards. 
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I cannot connect to the internet. my i touch tries to log me on as a guest. We have our on wi fii. This started when my battery ran very low and I recharged it.

    I cannot connect to the internet. my i touch tries to log me on as a guest. We have our on wi fii. This started when my battery ran very low and I recharged it.

    Try:
    - Resetting the iPOd. Noting will be lost.
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Power off and then back on your router.
    - Reset network settings: Setings>General>Reset>Reset Network Settings

  • HT1338 my macbook pro loosing its battery capacity very soon why?

    hii apple am ram ia m having one problem using macbook pro since 10months...now i am facing 2 problems
    1.battery capacity draing down very fast
    2.getting heated while watching video's in youtube and while playing games
    so kindly please help me out fro this problem
    thank you

    this is from my macbook pro 13 2012
    Battery Information:
      Model Information:
      Serial Number:    W01514DA5D3LA
      Manufacturer:    SMP
      Device Name:    bq20z451
      Pack Lot Code:    0
      PCB Lot Code:    0
      Firmware Version:    201
      Hardware Revision:    000a
      Cell Revision:    165
      Charge Information:
      Charge Remaining (mAh):    4770
      Fully Charged:    Yes
      Charging:    No
      Full Charge Capacity (mAh):    4828
      Health Information:
      Cycle Count:    176
      Condition:    Normal
      Battery Installed:    Yes
      Amperage (mA):    0
      Voltage (mV):    12425

  • X220 battery capacity getting lower with time (0.01 Wh per 2 days)

    I've noticed my 9cell battery max capacity reported by Power Manager gets lower each day. I don't remember if it started with designed 93 Wh, but it's now at 90.98Wh and was 90.99Wh 2 days ago. Laptop is in use every day and it is recharged every day.
    Is it more healthy to use battery or to connect it to AC when possible (battery inside)?

    Hi toncijukic!
    Yes, lithium-ion batteries lose capacity over time. To maximize the life of the battery, follow the advice in this knowledgebase article:
    http://forums.lenovo.com/t5/Welcome-FAQs-Knowledge-Base/How-can-I-increase-battery-life/ta-p/244800
    Hope this helps!
    I don't work for Lenovo. I'm a crazy volunteer!

  • Why is my iPod 5th gens battery have very low performance, Why is my iPod 5th gens battery have very low performance

    How do I make my battery life longer?

    See:
    Apple - Batteries - iPod
    How long doe a full charge last and what is the iPod doing during that time?

  • Battery Capacity took a hit???

    So it was normal day, and i went to calibrate my MBP battery, for i havent done it in a while. When it was done, all at 100% i checked the battery capacity, and it dropped a ton. Before calibration was around 5500mAh, now:
    Battery Information:
    Battery Installed: Yes
    First low level warning: No
    Full Charge Capacity (mAh): 4692
    Remaining Capacity (mAh): 4294
    Amperage (mA): -1623
    Voltage (mV): 11986
    Cycle Count: 27
    not a lot of cycles, so why has the battery gone down by 15% in less than one day??
    Thanks in advance

    It hasn't done the drop in one day. It's done it progressively between the previous calibration and your most recent calibration. It's like when the electric company meter read comes to see your meter. It's not as you used all that electricity in the one day. The calibration is to align the computer presumed battery capacity with the real capacity.
    However, your actual battery capacity seems lower than it should be. I would give it a week and try recalibrating… and be sure to let it sit in forced sleep for the minimum of 5 hours.

  • Has anyone had a problem with low battery capacity on the 6th gen ipod nano?

    I got my dad a 6th gen Ipod nano for his birthday and he is complaining about very low battery power and i was wondering if other nano users were experiencing this problem

    Samething here.  I got my ipod nano on Christmas 2010 and I always thought that it did not have the 24 hours music playback capacity.  This week I had the ultimate test.  I had to go the hospital and knew I would be waiting a long time. I fully charged my ipod nano (3 hours connected to my computer)... then, I turned it on at 11:30 in the morning and I played the radio non-stop until 5:30 PM when it just stopped working.  That's 6 hours of music playback, not 24...
    Is there something I should know about the battery and how to charge it to maximise music playback??

  • Ios 7.1 = no Wifi on iPhone 4s   very low battery runtime... HELP!!!

    ios 7.1 = no Wifi on iPhone 4s + very low battery runtime... HELP!!!

    Welcome, sorry to hear your news, there are numerous threads on this issue. Try the trouble shooting on the other threads, I do not recommend sticking it in the freezer or heating with a hair dryer though,
    If it's within warranty and trouble shooting doesn't work, get it. Ack to apple ASAP and get it replaced.
    Many others are in the same position, who also have a 4s
    Good luck

  • My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

    My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

    I have worked my way through the assistant and nothing works. I have tried connecting in disc mode but although the screen on the ipod is showing that the device is charged and that it is in disc mode as soon as I connect it to the computer it comes up with the error message 'please wait very low battery' and stays like that until I disconnect when it appears to be OK again. I have tried on both pc and mac.
    BTW the ipod is an ipod video not classic if that makes any difference.
    Thanks

  • My iphone 4S only start whit cable plug in and then show battery very low (with red line end) then try to turn on but show searching in operator name command and not connecting and no work properly and when I plug out it turn off!!! what should I do?

    My iphone 4S only start whit cable plug in and then show battery very low (with red line end) then try to turn on but show searching in operator name command and not connecting and no work properly and when I plug out it turn off!!! what should I do?

    I'm afraid you'll have to get the phone serviced, dropping the phone must have damaged additional parts inside the phone.
    But Apple will not service the phone anymore, opening the phone and replacing the battery should only be done by authorized personal, not by users.
    You'll have to look for a 3rd party repair shop and see if they can fix this, sorry.

  • ''Well When i plug in my ipod touch the battery life is low..i let it sit a wyhle.And it starts up to the apple logo and it stay there some time then it restartsback over to the very low battery and repeat(Over&Over)?

    ''Well When i plug in my ipod touch the battery life is low..i let it sit a wyhle.And it starts up to the apple logo and it stay there some time then it restartsback over to the very low battery and repeat(Over&Over)

    Can you reset the device by holding the sleep and home button until the Apple logo comes back again?
    If this does not work, try to connect in recovery mode, explained here: iOS: Unable to restore

  • My WiFi is not working on my ipod touch third gen. The wifi option in setting is blanked out so i am unabole to select it. I have tried restored it and resetting network connections. Also the battery life is very low.

    My WiFi is not working on my ipod touch third gen. The wifi option in setting is blanked out so i am unabole to select it. I have tried restored it and resetting network connections. Also the battery life is very low. How do i fix this????????????

    If a restore did not fix it, you have a hardware issue--possible bad wi-fi radio.
    Basic troubleshooting steps. 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

  • Trouble starting ipod (very low battery message) and loop

    Hello. I am having troble to start my ipod classic 5 generation. The message "please wait very low battery" (with an ipod with sad face) appears but the weird thing is that i just used it yesterday and i left it fully charged...but well. Then i try to charge the battery with a wall charger but it starts on a loop passing from the black screen with the apple logo, then it goes to the message "go to itunes/ipod/support" web site. and then it says again "please wait very low battery" just for a second and then it goes back to the black screen with apple logo and does this again and again. Then i tried to connect my ipod to the computer, after i do this it shows the message "please wait very low battery" and stays like this forever. I have tried ALL the suggestions, from trying to restart the ipod by clicking the middle button and the menu button at the same time (several times) and then clicking the middle button and the play button so it gows to the disk ode and nothing. I tryed witting it on the right corner and nothing. I already tested 3 usb different cables and nothing. It is not my usb port (i made tests with an ipod touch i have and works fine). Daaaaaaaaaarn!!! I really dont know waht to do now.
    Any advises please!!!!?
    Thanks a lot!
    Rick

    Have you seen these articles?
    iPod displays a folder icon with an exclamation point
    iPod displays a sad iPod icon
    Also, here's s very good post about the sad iPod icon and/or exclamation point and folder:
    Mitch: Exclamation point and folder and nothing else!
    -Kylene

Maybe you are looking for

  • Report/Form Please help

    Hi All, I need to know if there is a way to show a report with values from multiple tables that links to one form. I have limited experience and need the help. I have a table (table3 "ProCon") that links two separate tables (table1 "Project" and tabl

  • Missing

    Hello, I am doing a java mapping from a flat file to an IDOC. After the document is mapped succesfully I call an RFC via the Adapter. When monitoring the adapter I get the error: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from

  • How to load data thru flat file in demantra?

    Hi, I am using seeded data model for loading data for DM module in demantra. As per data model there is 3 staging tables for item, location and sales_data i.e. t_src_item_tmpl,t_src_loc_tmpl,t_src_sales_tmpl respectively. I have seen the final table

  • MySql select statement

    Hi All, I have java application which suppose to connect to MySql server and print the selected data. The application has 4 combo boxes (first item is empty): Name, Customer, Supplier, Status. User could choose any of these options. So there are huge

  • Sporadic failure of DNG conversion using Bridge

    For the past 2 years I have been happily using the Adobe DNG (stand-alone) software to convert the NEF files from my D200. I routinely do this at "ingestion" as recommended in an article by Bruce Fraser. I have never encountered a single problem with