Battery changes from red to green

The iPod Photo battery sometimes changes from red to green or green to red is something wrong with the battery. Some times it shows full then a minute later its red.

Also,
If you have used your iPod extensively and it has gone through many partial charge cycles without being completely run down then charged completely (more than 5 hours), your battery status indicator could require calibration.
This has happened with my iPod mini (the battery would appear almost full then almost empty after a minute). To re-calibrate the indicator, just run your iPod down completely (where it shuts down on its own), then charge it completely (5 or 6 hours). This seems to work, and Apple used to recommend doing it every 30 charge cycles or so (not sure if they still do).
~M

Similar Messages

  • After upgrading to 6.1.3 battery drains fast. Moreover initial charging takes more time to change battery indicator from red to green. any solution ?

    After updating the iphone 5 to IOS 6.1.3 battery drains fast. Also it takes more time to change battery status from Red to Green. Any solution?

    Anyone?
    Thinking I'm S.O.L at this point.

  • Failed info package, failed request turns from red to green after 1 hour so

    hi,
    There is a failed info package and if u go to monitor screen, the request status will be red in colour but then the same request after 1 hour or so turn from red to green automatically, why is this, what could be the possible reason??????????

    Hi Lieu.
    The system automatically sets the status for the load to incorrect if the waiting time is exceeded. The load will still be running even though it might look incorrect, and that is why it turns green when it is complete (and everything is correct).
    You can set the waiting time if you go to the monitor -> choose a request -> settings -> waiting time up to status incorrect (ctrl + F9).
    Hope it helps (assign points if helpfull!).
    BR
    Stefan

  • HT3529 i have just updated my iphone to the ios 7.0.2 and now the text message bubble has changed from blue to green, is this as it should be?

    i have recently updated my iphone to the ios 7.0.2 version and now the text message bubble has changed from blue to green, is this as it should be?

    You will need to purchase the upgrade CD for 10.6 from the Apple Online store, OR you can likely get one at an Apple Retail Store.  It is the last version that was available on CD.  After 10.6, the upgrades are available in the Mac App Store. 
    HTH

  • Why has iMessages from iPhone to iPhone changed from blue to green recently?

    Why has iMessages from iPhone to iPhone changed from blue to green recently?

    Hi Steve
    So your WiFi is turned On for your phone...  just wanted to check!
    Do you know if it's only your home wifi or all wifi sources?
    Try a simple reset of your iPhone
    1.  When the iPhone is on ... simulatneously hold down your off/on button (top of your iphone) and push the home button (the one at the bottom of yopur iPhone).
    2.  Hold this until the Apple icon appears (the screen will go black first).
    3.  Try sending a message to your wife (Just testing etc)
    Cheers

  • Read yellow color from red and green colors

    hi everyone
    need help in extracting yellow color from red and green colors (RGB space).
    before that, the B channel was set to zero.
    can display RG and CMYK together (like Adobe Photoshop)?
    thanks.
    mySiti

    hi everyone
    need help in extracting yellow color from red and green colors (RGB space).
    before that, the B channel was set to zero.
    can display RG and CMYK together (like Adobe Photoshop)?
    thanks.
    mySiti

  • T61 Battery light flashes red and green

    Hello:
    My T61(type 8891) won't start. I'm getting a series of flashes from the battery and power lights:
    A/C power connected: power light flashes green alternately and battery light flashes green then red/green.
    AC off, battery installed: power light flashes green at the same time as the battery light flashes red/green.
    This happened twice before in the past 2 weeks. After about an hour, it booted up - no problem. This time, nothing.
    Thanks in advance for any assistance.

    It started about one month ago - no known cause. The problem happened 3 times since then but each time it booted up by itself  after a half hour or so. A new motherboard is going to set me back plenty but f it's needed, I guess I must get it repaired. I'm quite handy at taking the laptop apart. I've replaced the hinge, and bezel.
    Maybe the fan is inoperable which may cause it to not boot up. Lately, I've been feeling exhaust air much warmer than before even if it's not being used. I blew the dust off it 3 weeks ago.

  • My ipod nano has horizaontal lines through the bottom portion of the screen and the left half of the screen is black, the right half of the screen changes from red, to blue to orange, etc.  Any idea how to fix that?

    White stripes suddenlt appeared at the bottom of the screen on my ipod nano a few weeks ago.  I figured it was just from use and that it is an older model- I could still see through them and use the device.  Yesterday, only the left half of the screen was visible, the other side was black.  This morning, the stripes are still there, all the way across the screen on the bottom, the left side os black and the right sise is red most of the time.  Any ideas on what happened and how to fix it?

    Hello scgreco,
    I would be concerned as well if my iPod nano screen had stripes and was partially black.  I found a resource that I think would help in a situation like this.
    I recommend following the steps in this troubleshooting assistant for your iPod nano model:
    iPod Troubleshooting Assistants
    http://www.apple.com/support/ipod/five_rs/
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • Battery changes from 100% to 99% while charging

    Hello
    Since I have os x lion, when the battery charge reaches 100%, but after several hours says99% (battery full) and 98% after a while
    someone does this happen?
    thank you very much

    Matías que tal?
    Ooye vi que tenías un problema con el ruido del disco duro y te lo cambiaron en Mac, se arregló el problema?Tengo un MBP de 13" i7 y también suena, lo llevé a Mac pero me dijeron que no podían hacer nada. Tu qué les dijiste? Tienes la orden de trabajo o algo? Algún dato/tip/ayuda? Cualquier cosa me podrías mandar un mail a [email protected] porfa?
    Gracias saludos!

  • Changing colour from red to white

    I'm working on a catalogue and one of the images (a radiator) needs to be changed from red to white.
    I've looked for tutorials and tips on the web but can only find help on how to change from one colour to another such as red to green or blue.
    Can anyone help me?

    Try here. Link 11 and 12 look promising.
    A quick way to get to white: make a new layer and change the blending mode to color. Paint over the radiator with white in your new layer. When you're done, duplicate the layer and make the blending mode for the second layer overlay. Adjust opacity to suit.
    J

  • Process chain program variant will not change from yellow...

    Hello,
    <b>Problem:</b>
    I have a process chain that has two branches with 3 process chain variants on each leg in a parallel configuration.  The process chain variants run different program variants.  I am using variant object called "ABAP Program with Success/Failure " which can have a yellow, green, or red status and has status arrows that can be either red or green that connect to other process chain variants.  The program executed with these variants is a customized BPS UPC_BUNDLE_EXECUTE program.  When I run this PC the first variant on each leg usually hangs indefinitley on the yellow status.  In the Backg tab log (double click PC variant in Log View) I can see the various SQL code that was ran.  The last line of the log is an SQL-END:...  Sometimes it will get past the first 2 varaints and hang on the next set of 2.  Other times it will just hang on the last variant of one leg.  It is very sporadic.
    <b>What I have observed and tried:</b>
    If I check my SM51 for the server the chain is running on I can see that the program in question is not running.  If I run the same program through SE38 that runs via a PC variant it runs sucessfully in an appropriate amount of time.  If I kill the process that has been running indefinitley through SM51 the process chain variant will go from a yellow status to a red as expected.
    I changed they way I ran the programs from running in parallel in 2 legs to running all of them in one leg serially.  That did not work.  At least one program variant will hang on the yellow status.
    I replaced all the variants using "ABAP Program with Success/Failure" to "ABAP Program" which has a red/green status but no red or green arrows, but black coming out of the variant forcing it to move down the chain on a sucess or failure.  The process chain variants also hung in the yellow status using the "ABAP Program" variant. 
    I have tried starting the process chain using both "Direct Scheduling" with "Immediate" and "After Event."  I have also kicked it off using "Start Using Meta Chain or API" so it was functioning as a sub process chain. Programs were still yellow in every case without changing to red or green. 
    I created new process chain variants for every single program/variant that I am using.  Still no luck.
    I have tried removing the chain from the schedule and re-activating and re-running and still no luck. 
    Thanks in advance,
    Gary Martins

    bump

  • Red eye green - what if eyes are different color

    the red eye tool only allows for eyes to be reduced from red to green
    which works great on my friend with green eyes
    and it looks terrible on brown eyes
    is there not some way to switch the color???
    it only makes common sense and yet I cannot find a way to do it
    please help....

    chronos
    The red eye filter is designed only to work on the pupil or black part of the eye, not on the iris - the blue or brown part.
    Regards
    TD

  • Why does the light on my battery charger change from green to orange after a few seconds?

    Why does the light on my battery charger cable change from green to orange?  The battery continues to accept a charge when light turns orange.

    Green = not charging.
    Orange = charging.
    Note that if your laptop is pulling enough power (using CPU and GPU heavily) the light will turn green because the power adapter cannot provide enough power to charge your batteries in addition to keeping the system going.
    In fact, you can drain your batteries even with the adapter plugged in with the 17 inch Macbook Pro if you push it hard enough, although I have not noticed this problem with my Retina Macbook Pro.

  • My z10 led flashing red when charging and even at battery full it blinks red. no green at any note..

    My z10 led flashing red when charging and even at battery full it blinks red. no green at any notification. But at below 10% charging level it blinks with a combination of red and green. Please send me any settings to be changed if.. at full charged no green light is blinking.. how many colours does z10 led have..and when it works and how to make those settings..or was my led not working fine? I am worried so much..plz help me

    Your LED is fine, on the Z10 there is not "network signal available" green LED, as you're accustomed to from the legacy devices. At reaching 10%, the LED will blink orange.
    Red for message or applicaiton notifications.
    if you want to edit and create specific LED color combination, see the third party apps such as BeBuzz or Hub++
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • When I first plug in my power cord it lights up green and then after a few seconds changes to red.  What does this mean and how do I fix it?

    When I first plug in my power cord it lights up green and then after a few seconds changes to red.  What does this mean and how do I fix it?

    Apple systems in MBP have self-maintaining charging systems.  If the battery is less than 95%, the charger light turns orange when plugged it.  It will charge to 100% and stay green then will hold on charging until the battery drops to 95% again.

Maybe you are looking for

  • I Can't Put Songs Onto My iPod Touch!

    whenever i go onto iTunes and try to put songs onto my iPod using the click and drag method i get this message - 'the iPod "George's iPod" cannot be synced. The disk could not be read from or written to'. What can i do? Please, anyone, even a guess w

  • Fixed Width JTextArea or JTextPane with 'as-needed' height

    I'm trying to solve the above problem. I want to implement a text component that will have a defined width (say 200px) but will expand in height so that all text within the component is visible. I do not want a scrollbar. The word wrapping capabiliti

  • Recreate Table Error?

    Code generated using synchronise seem to ommit the schema prefix when re-interting the records from the backup table: Anyone know if there is an option I need to cick somewhere, or whether this is a bug? ALTER TABLE UNIGSE.SERVICE_REQUEST RENAME TO b

  • Ebay mobile features with iphone

    I have a question. I use ebay frequently for buying, and noticed that they have an option for items that will send an im to your phone number. the problem i'm having is that after completing the necessary forms, i never get any notices via my phone.

  • Youtube-dl called from python script fails...why ? [solved]

    Hi there, since downloading youtube stuff with Browser plugins has been pretty unstable for me lately (read: mostly incomplete videos) I switched over to youtube-dl again. Unfortunately youtube-dl often stops downloading as well... I wrote a small Py